Manual Intel D15343-003

166 pages 0.88 mb
Download

Go to site of 166

Summary
  • Intel D15343-003 - page 1

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) Datasheet Revision 2.0 June 2005 Order Number: D15343-00 3 ...

  • Intel D15343-003 - page 2

    2 D15343-003 INFORMA TION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHER WISE, T O ANY INTELLECTUAL PROPERTY RI GH TS IS GRANTED BY THIS DOCUMENT . EXCEPT AS PROVID ED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, IN TEL ASSUMES NO LIABILITY WHA TSOEVER, AND I ...

  • Intel D15343-003 - page 3

    D15343-003 3 Contents Contents 1.0 Introduction ................ ............. ................ ............. ................ ............. ................ ......... .......... .......... 11 1.1 Overview ......... ................ ............. ................ ............. ............. ................ ............. ....... ......... 11 1.2 Te ...

  • Intel D15343-003 - page 4

    4 D15343-003 Intel ® 82854 Graphic s Memory Controller Hub (GMCH) 4.8.4 PCI Status Register ..... ................ ............. ................ ................ ............. ................ 53 4.8.5 RID – Register Identification ........... ............. ................ ............. ................ ............. 54 4.8.6 SUBC – Sub Clas ...

  • Intel D15343-003 - page 5

    D15343-003 5 Contents 4.10.9 SVID – Subsystem Vendor Identific ation Register....... ................ ................ .......... 97 4.10.10 ID – Subsystem Identifi cation Register ..... ................ ............. ............. ................ ... 97 4.10.11 CAPPTR – Capabilities Pointer Register ............... ......................... ...

  • Intel D15343-003 - page 6

    6 D15343-003 Intel ® 82854 Graphic s Memory Controller Hub (GMCH) 6.4.1 3D/2D Instruction Processing ................... ................ ................ ............. .............. 126 6.4.2 3D Engine ... ............. ................ ............. ................. ............ ............. ................ ..... 127 6.4.3 Raster Engine . .. ...

  • Intel D15343-003 - page 7

    D15343-003 7 Contents Figures 1 Intel® 854 Chipset system block diagram (Native Graphic mode) ................... .................... ...... 16 2 Configuration Address Register ........................ .......... ............. ................ ............. ............ ........ .. 45 3 Configuration Data Register .......................... ..... ...

  • Intel D15343-003 - page 8

    8 D15343-003 Intel ® 82854 Graphic s Memory Controller Hub (GMCH) 29 Relation of DBI B its to Data Bits ................ ............. ................ ............. ................ ............. ..... ... 123 30 Data Bytes on DDR DIMM Us ed for Programming DRAM Registers ..... ............. ................ ..... 125 31 Dual Display Usage Model ...

  • Intel D15343-003 - page 9

    D15343-003 9 Contents Revision History § § Date Revision Description March 2005 1.0 Initial release of this document. June 2005 2.0 Add support for Genuine Intel® Processor at 1.2 GHz and Genuine Intel® Processor at 1.5 GHz technology . ...

  • Intel D15343-003 - page 10

    10 D15343-003 Intel ® 82854 Graphic s Memory Controller Hub (GMCH) ...

  • Intel D15343-003 - page 11

    Introduction D15343-003 11 1.0 Introduction This documen t is the data sheet for the Intel ® 82854 Graphics Memory Controller Hub (GMCH). 1.1 Overview The Intel ® 854 chipset is a combinatio n of the Intel ® 82854 Graphics M emory Controller H ub (GMCH) (Graphics Memory Controller Hub) and ICH4-M (I/O Controller Hub). The Intel 854 Chipset is de ...

  • Intel D15343-003 - page 12

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 12 D15343-003 System Interrupt s • Supports Intel 8259 and front side bus interrupt delivery mechanism • Supports interrupts sign aled as upstream memory writes from PCI and Hub interface • MSI sent to the CPU through the system bus • IOxAPIC in ICH4-M provides redirect ion for upst ream ...

  • Intel D15343-003 - page 13

    Introduction D15343-003 13 Display • Analog display sup port — 350-MHz integrated 24-bit RAMDAC that can drive a standa rd progressi ve scan analog monitor with pixel resolution up to 160 0x1200 at 85 Hz and up to 2048x1 536 at 75 Hz • Dual independent pipe support — Concurrent: different images and display timings on each display device ? ...

  • Intel D15343-003 - page 14

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 14 D15343-003 • 3D graphics engine — 3D setup and render engine — Enhanced Hardware Binning Instruction Set su pported — Zone rendering — High quality performance texture eng ine — V iewpo int transform and perspect ive divide — T riangle lists, strips and fans support — Indexe d ...

  • Intel D15343-003 - page 15

    Introduction D15343-003 15 — Dithering — Line and full-scene anti-aliasing — 16- and 24- bi t Z buffer ing — 16- and 24-bit W buffering — 8-bit Stencil buffering — Double and triple render buffer support — 16- and 32- bi t colo r — Destination alpha — V ertex cache — Optimal 3D resolution su pported — Fast Clear support — RO ...

  • Intel D15343-003 - page 16

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 16 D15343-003 Package 732-pin Micro-FCBGA (37 .5 x 37.5 mm) Figure 1. Intel® 854 Chip set system block diagram (Native Graphic mode ) In te l ® Ce l er o n ® M Processor SI O PS/ 2 Ser i al FW H In te l ® 82801DB M (IC H 4 - M ) Au d i o Cod ec AC Li n k LPC PCI Sl ot s LAN PHY 6 US B ID E LC ...

  • Intel D15343-003 - page 17

    Introduction D15343-003 17 1.2 T erminology T able 1. T erms and Descriptions T erm Description AG TL+ Advanced Gunning Transceiver Logic + (AG TL+) bus BLI Backlight Inverter Core The internal base logic in the Intel ® 82854 GMCH CPU Central Processing Unit CRT Cathode Ray T ube DBI Dynamic Bus inversion DBL Display Brightness Link DDC Display Da ...

  • Intel D15343-003 - page 18

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 18 D15343-003 Intel 82801DBM ICH4-M The component contains the prim ary PCI interface, LPC interface, USB 2.0, A T A-100 , AC’97, and other I/O functions. It communicates with the Intel ® 82854 GMCH over a proprietary interconnect ca lled the Hub interface. Throughout this datasheet, the Intel ...

  • Intel D15343-003 - page 19

    Introduction D15343-003 19 1.3 Reference Document s T able 2. Reference Docume nt s Document Location Intel® Celeron® M Processor Datasheet http://www .intel.com/design/mobile/datashts/300302.htm Ultra Low V oltage Intel(R) Celeron(R) M Processor at 600 MHz Addendum to the Intel(R) Celeron(R) M Processor Datasheet http://developer .intel.com/desi ...

  • Intel D15343-003 - page 20

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 20 D15343-003 ...

  • Intel D15343-003 - page 21

    Intel ® 82854 GMCH Overview D15343-003 21 2.0 Intel ® 82854 GMCH Overview 2.1 System Architecture The Intel ® 82854 GMCH includes a processor inte rface, DDR SDRAM interface, display interface, and Hub interface. Combined with the UL V Int el® Celeron® M Proces sor or Genuine In tel® Pr ocessor , and an ICH4- M, it provides many of the functi ...

  • Intel D15343-003 - page 22

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 22 D15343-003 2.2 Processor Host Interface The Intel ® 82854 GMCH supports the In tel Celeron M Processor, and Genuine Intel Processor . Key features of the front side bus (FSB) are: • Support for a 400-MHz system bus frequency . • Source synchronous double pump ed address (2X) • Source sy ...

  • Intel D15343-003 - page 23

    Intel ® 82854 GMCH Overview D15343-003 23 The GMCH system memory architect ure is optimized to maintain open pages (up to 16-KB page size) across multiple rows. As a result, up to 16 pages across four ro ws is supported. T o complement this, the GMCH will tend to keep pages open within ro ws, or will only close a single bank on a page miss. The GM ...

  • Intel D15343-003 - page 24

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 24 D15343-003 2.6 Hub Interface A proprietary interconnect connects the GMCH to the ICH4-M. All communication between the GMCH and the ICH4-M occurs over the Hub inte rface 1.5. The Hub inte rface runs at 66 MHz (266-MB/s). 2.7 Address Decode Policies Host initiated I/O cycles are positively d ec ...

  • Intel D15343-003 - page 25

    Intel ® 82854 GMCH Overview D15343-003 25 2.8 GMCH Clocking The GMCH has the fol lowing clock inpu t/output pin s: • 400-MHz, spread spectrum, low v oltage differential BCLK, BCLK# for front side bus (FSB) • 66-MHz, 3.3-V GCLKIN for Hub interface buf fers • Six pairs of differential output clocks (SC K[5 :0], SCK [5:0]#), 200/266 MHz, 2.5 V ...

  • Intel D15343-003 - page 26

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 26 D15343-003 2.9 System Interrupt s The GMCH supports both the legacy Intel 8259 Programm able Interrupt deli very mechanism and the Intel Celeron M processor FSB interrup t delivery mechanism . The serial APIC Interrupt mechanism is not supported . The Intel 8259 Interrupt delivery mech an ism ...

  • Intel D15343-003 - page 27

    Signal Description D15343-003 27 3.0 Signal Description This section describes t he Intel ® 82854 GMCH signals. These sign als are arranged in functi onal groups according to their associated interface. The following notatio ns are used to describe the signal type. The signal description also includes the type of buffer used for the particular si ...

  • Intel D15343-003 - page 28

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 28 D15343-003 3.1 Host Interface Signals T able 5. Host Interface Sig nal De scriptions Signal Name T y pe Description ADS# I/O AG TL+ Ad dress Strobe: The system bus owner asserts ADS# to indicate the first of two cycles of a request phase. The GMCH can assert this signal for snoop cycles and int ...

  • Intel D15343-003 - page 29

    Signal Description D15343-003 29 DRDY# I/O AG TL+ Data Ready: Asserted for each cycle that data is transferred. HA[31:3]# I/O AG TL+ Host Address Bus: HA[31:3]# connects to the CPU address bus. During processor cycles the HA[31:3]# are inputs. The GMCH drives HA[31:3]# during snoop cycles on behalf of H ub interface. HA[31:3]# are transferred at 2x ...

  • Intel D15343-003 - page 30

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 30 D15343-003 RS[2:0]# O AG TL+ Resp onse St atus: Indicates the type of resp onse according to the following the table: RS[2:0]# Response typ e 000 Idle state 001 Retry response 010 Deferred response 01 1 Reserved (not driven by GMCH) 100 Hard Failure (not driven by GMCH) 101 No data response 1 1 ...

  • Intel D15343-003 - page 31

    Signal Description D15343-003 31 3.2 DDR SDRAM Interface T able 6. DDR SDRAM Interface Descriptions Signal Name T ype Description SCS[3:0]# O SSTL_2 Chip Select: These pins select the particular DDR SDRAM components during the active state. NOTE: There is one SCS# per DDR-SDRAM Physical DDR DIMM device row . These signals can be toggled on every ri ...

  • Intel D15343-003 - page 32

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 32 D15343-003 3.3 Hub Interface Signals T able 7. Hub Interface Signals SMAB[5,4,2,1] O SSTL_2 Memory Address Copies: These signals are identical to SMA[5,4,2 ,1] and are used to reduce loading for selectiv e CPC(clock-per-command). These copies are not inv er ted. SDM[8:0] O SSTL_2 Data Mask: Whe ...

  • Intel D15343-003 - page 33

    Signal Description D15343-003 33 3.4 Clocks T able 8. Cloc k Signals Signal Name T ype Description Host Processor Clocking BCLK BCLK# I CMOS Differential Host Clock I n: These pins receive a buffered host clock from the external clock synthesizer . This clock is used by all of t he GMCH logic that are in the Host clock domain (Host , Hub and system ...

  • Intel D15343-003 - page 34

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 34 D15343-003 DPMS I DVO Display Power Management Signaling: This signal is used only in mobile systems to act as the DREFCLK in certain power management states (i.e., Display Power Down Mode); DPMS Clock is used to refresh video during S1-M. Clock Chip is powered down in S1-M. DPMS should come fr ...

  • Intel D15343-003 - page 35

    Signal Description D15343-003 35 3.5 Internal Graphics Display Signals The IGD has support fo r DVOB/C interfaces, and an Analog CR T port.Digital V ideo Output B (DVOB) Port. 3.5.1 Digit al Video Ou tput B (DVOB) Port T able 9. Digit al Video Output B (DVOB) Port Signal Desc riptions Name T ype De scription DVOBD[1 1:0] O DVO DVOB Dat a: This data ...

  • Intel D15343-003 - page 36

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 36 D15343-003 3.5.2 Digit al Video Ou tput C (DVOC) Port T able 10. Digit al Vi deo Output C (DVOC) Port Signal Descriptions Name T ype Descriptio n DVOCD[1 1:0] O DVO [Native Graphic Mode] DVOC Data : This data bus is used to drive 12-bit RGB data on each edge of the differential clock signals, D ...

  • Intel D15343-003 - page 37

    Signal Description D15343-003 37 T able 1 1. DVOB and DVOC Port Common Signal Des criptions 3.5.3 Analog CRT Display T able 12. Analog CRT Display Signal Description s Name T ype De scription DVOBCINTR# I DVO DVOBC Interrupt : This pin is used to signal an interrupt, typically used to indicate a hot plug or unplug of a digital display . ADDID[7:0] ...

  • Intel D15343-003 - page 38

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 38 D15343-003 3.5.4 General Purpose Input/Output Signals T able 13. GPIO Signal Descriptions GPIO I/F T otal T ype Comments RSTIN# I CMOS Reset: Primary Reset, Connected to PCIRST# of ICH4-M. PWROK I CMOS Pow e r O K : Indicates that power to GMCH is stable. EXTTS_0 I CMOS External Thermal Sensor ...

  • Intel D15343-003 - page 39

    Signal Description D15343-003 39 3.6 V olt age References, PLL Power T able 14. V olt age References, PLL Power Signal Name T ype De scription Host Processor HXRCOMP Analog Host RCOMP: Used to calibrate the Host AG TL+ I/O buffers. HYRCOMP Analog Host RCOMP: Used to calibrate the Host AG TL+ I/O buffers. HXSWING Analog Host V oltage Swing (RCOMP re ...

  • Intel D15343-003 - page 40

    Intel ® 854 Graphics Memory Co ntroller Hub (GMCH) 40 D15343-003 Hub Interface HLRCOMP Analog Hub Interface RCOMP : This signal is co nnected to a reference re sistor in order to calibrate the buffers. PSWING Analog RCOMP reference volt age : This is connected to the RCOMP buffer differential amplifier and is used to calibrate the buffers. HL VREF ...

  • Intel D15343-003 - page 41

    Register Descriptio n D15343-003 41 4.0 Register Description 4.1 Conceptual Overview of the Plat form Configuration St r u c t u r e The GMCH and ICH4-M are physically connect ed by a Hub interface. From a configuration standpoint, the Hub interface is logically PCI bu s #0. As a result, all devices intern al to the GMCH and ICH4-M appear to be on ...

  • Intel D15343-003 - page 42

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 42 D15343-003 4.2 Nomenclature fo r Access Attributes Ta b l e 1 6 provides the nomenclature for the access attributes. T able 16. Nomenclature for Acces s Attributes A physical PCI Bus #0 does not exist. The Hub in terface and the internal devices in the GMCH and ICH4-M logically constitute PCI ...

  • Intel D15343-003 - page 43

    Register Descriptio n D15343-003 43 4.3 S t andard PCI Bus Configuration Mechanism The PCI Bus defines a slot based “configuration space” that allows each de vice to contain up to eight functions with each function containing up to 256, 8-bi t configuration re gisters. The PCI Specification defines two bus cycles to access th e PCI Configuratio ...

  • Intel D15343-003 - page 44

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 44 D15343-003 4.4.2 Primary PCI and Downstr eam Configuration Mechanism If the Bus Number in the CONFIG_ADDRESS is non-zero, the GMCH will generate a T ype 1 Hub interface Configuration Cycle. A[1:0] of the Hub interface request packet for the T ype 1 configuration cycle will be “01”. This Hu ...

  • Intel D15343-003 - page 45

    Register Descriptio n D15343-003 45 system initializati on soft ware (usually BI OS) to properly determ ine the DDR SDRAM configurations, operating parameters, and optio nal system features that are applicable and to program the GMCH registers accordingly . 4.6 I/O Mapped Registers The GMCH contains two registers that reside in the CPU I/O Address ...

  • Intel D15343-003 - page 46

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 46 D15343-003 Bit Descriptions 31 Configuration Enable (CFGE): When this bit is se t to 1, accesses to PCI Configuration Sp ace are enabled. If this bit is Reset to 0, access es to PCI Configuratio n S pace are disabled. 30:24 Res erved 23:16 Bus Number: When the Bus Number is programmed to 00h, ...

  • Intel D15343-003 - page 47

    Register Descriptio n D15343-003 47 4.6.2 CONFIG_DA T A – Conf iguration Dat a Register CONFIG_DA T A is a 32-bit Read/W rite window into Configur ation Space. The portion of Configuration Space that is referenced by CO NFIG_DA T A is determined by the contents of CONFIG_ADDRESS. I/O Address: Default V alue: Access: Size: 0CFCh 00000000h Read/Wri ...

  • Intel D15343-003 - page 48

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 48 D15343-003 4.7 VGA I/O Mapped Registers If Native Graphics mode is strapped, and Device #2 is enabled, and Function #0 wi thi n Device #2 is enabled for VGA, and IO_EN is set within Functio n #0 then GMCH claims a set of I/O regi sters for legacy VGA function. T able 17 lists direct CPU Access ...

  • Intel D15343-003 - page 49

    Register Descriptio n D15343-003 49 4.8 Intel 854 GMCH Host-Hub Inte rface Bridge Device Registers (Device #0, Function #0) T able 5 summarizes th e configuration space for Device #0, Function#0. T able 19. GMCH Configuration Sp ace - Device # 0, Function#0 Register Name Register Symbol Register Star t Register End Default V alue Access V endor Ide ...

  • Intel D15343-003 - page 50

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 50 D15343-003 Aperture T ranslation T able Base A T TBASE B8 BB 00000000h RO, R/W Host Error Control/S tatus/ Obs HEM F0 F3 00000000h RO, R/W ...

  • Intel D15343-003 - page 51

    Register Descriptio n D15343-003 51 4.8.1 VID – V endor Id entification Register The VID Register contains the vendor id enti fication number . This 16 -bit register , combined with the Device Identification Register, uniquely identif ies any PCI device. W rites to this register have no effect. 4.8.2 DID – Device Id entification Register This 1 ...

  • Intel D15343-003 - page 52

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 52 D15343-003 4.8.3 PCICMD – PCI Command Register Since GMCH Device #0 does not physically resi de on PCI_A m a ny of the bits are not implemented. Address Offset: Default V alue: Access: Size: 04-05h 0006h Read only , Read/Write 16 bits Bit Descriptions 15:10 Reserved 9 Fast Back-to-Back Ena b ...

  • Intel D15343-003 - page 53

    Register Descriptio n D15343-003 53 4.8.4 PCI St atus Register PCISTS is a 16-bit status regi ster that reports the occurrence of error events on Device #0's PCI Interface. Bit 14 is Read/W rite Clear . All other bits are Read Only . Since GMCH Device #0 does not physically reside on PCI_A many of the bits are not implement ed. Address Offset: ...

  • Intel D15343-003 - page 54

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 54 D15343-003 4.8.5 RID – Register Identification This regist er contains the revision n umber of the GMCH Device #0. These bits are read only and writes to this regist er have no effect. 4.8.6 SUBC – Sub Class Code Register This register contains the Sub-Class Code for the GMCH Device #0. Th ...

  • Intel D15343-003 - page 55

    Register Descriptio n D15343-003 55 4.8.7 BCC – Base Cl ass Code Register This register contains the Base Class code of the GMCH Device #0. This code is 06h indicating a Bridge device. 4.8.8 HDR – Header T ype Register This register identifies the header layout of the configuration space. No physical register exists at this location. 4.8.9 SVID ...

  • Intel D15343-003 - page 56

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 56 D15343-003 4.8.10 SID – Subsystem Identification Register This value is used to id entify a partic ul ar subsystem. 4.8.1 1 CAPPTR – Cap abiliti es Pointer Register The CAPP TR provides the offset that is the pointer to the location of the first device capability in the capability li st. A ...

  • Intel D15343-003 - page 57

    Register Descriptio n D15343-003 57 4.8.12 CAPID – Cap abilities Identi fication Register (Device #0) The Capability Identificat ion Register un iquely identifies chipset capabilities as defined in the table below . The bits in th is register are intended to define a capability cei ling for each feature, not a capability select. The capability se ...

  • Intel D15343-003 - page 58

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 58 D15343-003 4.8.13 GMC – GMCH Misce llaneous Control Re gister (Device #0) Address Offset: Default V alue: Access: Size: 50-51h 0000h Read/Write 16 bits Bit Descriptions 15:10 Reserved 9 Reserved 8 RRBAR Access Enable—R/W : 1: Enables the RRBAR space. 0: Disable 7:1 Reserved 0 MDA Present ( ...

  • Intel D15343-003 - page 59

    Register Descriptio n D15343-003 59 4.8.14 GGC – GMCH Graphics C ontrol Register (Device #0) Address Offset: Default V alue: Access: Size: 52-53h 0030h Read/Write 16 bits Bit Descriptions 15:7 Reserved 6:4 Graphics Mode Select (GMS): This field is used to select the a mount of Main system memory that is pre-allocated to support the Internal Graph ...

  • Intel D15343-003 - page 60

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 60 D15343-003 4.8.15 DAFC – Device and Function Control Register (Device #0) This 16-bit register control s the visibility of devices and functions wi thi n the GMCH to configurati on software. 4.8.16 FDHC – Fixed D RAM Hold Control Register (Device #0) This 8-bit register controls a single f ...

  • Intel D15343-003 - page 61

    Register Descriptio n D15343-003 61 4.8.17 PAM(6:0) – Programmable Attr ibute Map Register (Device #0) The GMCH allows programmable DDR SDRAM attributes on 13 Legacy system memory segments of various sizes in the 640 kB -1 MB address range. Seven Programmable Attrib ute Map (P AM) registers are used to suppor t these features. Cacheab ility of th ...

  • Intel D15343-003 - page 62

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 62 D15343-003 As an example, consider a BIOS that is im plemented on the Expansion bus. During the initialization process, the BIOS can be shadowed in main system memory to increase the system performance. When BIOS is shadowed in main system memory , it should be copied to the same address locat ...

  • Intel D15343-003 - page 63

    Register Descriptio n D15343-003 63 T able 21. P AM Registers and Associate d System Memory Segment s For details on overall syst em add ress mapping sche me see the Address Decoding section of this document. DOS Application Area (00000h-9FFFh ) The DOS area is 640 kB in si ze and it is further divi ded into two parts. The 512-kB area at 0 t o 7FFF ...

  • Intel D15343-003 - page 64

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 64 D15343-003 Extended System BIOS Area (E0000h-EFFFFh) This 64-kB area is divided into four 16-kB segments that can be assigned wi th different attributes via P AM Cont rol register as defined in Figu re 4 and Ta b l e 2 1 . System BIOS Area (F0000h-FFFFFh) This area is a single 64-kB segmen t t ...

  • Intel D15343-003 - page 65

    Register Descriptio n D15343-003 65 4.8.19 ESMRAMC – Extended System Management RAM Control (Device #0) The Extended SMRAM register controls the configuration of Extended SMRAM Space. The Extended SMRAM (E_SMRAM) Memory provides a Write-Back cacheable SMRAM Memory Space that is above 1 MB. Address Offset: Default V alue: Access: Size: 61h 38h Rea ...

  • Intel D15343-003 - page 66

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 66 D15343-003 4.8.20 ERRSTS – Error Stat us Register (Device #0) This register is used to report various error conditions via Hub Interface Special cycles. An SERR, SMI, or SCI Error Hub Interface Special cycle may be generated on a zero to one transition of any of these flags when enabled in t ...

  • Intel D15343-003 - page 67

    Register Descriptio n D15343-003 67 4.8.21 ERRCMD – Error Comm and Register (Device #0) This register enables various errors to genera te a SERR Hub Interface Sp ecial cycle. Since the GMCH does not have a SERR# signal, SERR messag es are passed from the GMCH to the ICH4 -M over Hub interface. The actual generation of the SERR me ssage is globall ...

  • Intel D15343-003 - page 68

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 68 D15343-003 4.8.22 SMICMD – SMI Error Co mmand Register (Device #0) This register enables various errors to generate an SMI Hub Interface Special cycle. When an Error Flag is set in the ERRSTS register , it can gene rate a SERR, SMI, or SCI Hub Interface Special cycle when enabled in the ERRC ...

  • Intel D15343-003 - page 69

    Register Descriptio n D15343-003 69 4.8.23 SCICMD – SCI Error Co mmand Register (Device #0) This register enables various errors to generate a SCI Hub Interface Special cycle. W hen an Error Flag is set in the ERRSTS register, it can ge nerate a SERR, SMI, or SCI Hub Interface Special cycle when enabled in the ERRCMD, SMIC MD, or SCICMD registers ...

  • Intel D15343-003 - page 70

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 70 D15343-003 4.8.24 SHIC – Secondary Host Interf ace Control Regist er (Device #0) Address Offset: Default V alue: Access: Size: 74-77h 00006010h Read Only , Read/Write 32 bits Bit Descriptions 31 Reserved 30 BREQ0# Con trol of FSB Address and C ontrol bus power managem ent : 0: Disable FSB ad ...

  • Intel D15343-003 - page 71

    Register Descriptio n D15343-003 71 4.8.25 HEM – Host Error Control, St atus, and Observation (Device #0) Address Offset: Default V alue: Access: Size: F0-F3h 00000000h Read Only , Read/Write 32 bits Bit Description 31 Detected HADSTB1# Glitch ( ASTB1GL ): This bit is set when the GMCH has detected a glitch on address strobe HADSTB1#. Software mu ...

  • Intel D15343-003 - page 72

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 72 D15343-003 4.9 I ntel 854 GMCH Main Memory Control, Memory I/O Control Registers (Device #0, Function #1) The following table shows the GMCH Configuration Space for Device #0, Function #1. See “Nomenclature for Access Attributes” on page 42 for access nomenclature. T able 22. Host-Hub I/F ...

  • Intel D15343-003 - page 73

    Register Descriptio n D15343-003 73 4.9.1 VID – V endor Id entification Register The VID Register contains the vendor id enti fication number . This 16-bit register com bin ed with the Device Identification Register uniqu ely identif ies any PCI device. Writes to this register have no effect. 4.9.2 DID – Device Id entification Register This 16- ...

  • Intel D15343-003 - page 74

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 74 D15343-003 4.9.3 PCICMD – PCI Command Register Since Intel chipset Device #0 does not physi cally reside on PCI_A, many of the bits are not implemented. Address Offset: Default V alue: Access: Size: 04-05h 0006h Read Only , Read/Write 16 bits Bit Descriptions 15:10 Reserved 9 Fast Back-to-Ba ...

  • Intel D15343-003 - page 75

    Register Descriptio n D15343-003 75 4.9.4 PCISTS – PCI St atus Register PCISTS is a 16-bit status regi ster that reports the occurrence of error events on Device #0's PCI Interface. Bit 14 is Read/W rite Clear . All other bits are Read Only . Since GMCH Device #0 does not physically reside on PCI_A, many of the bits are not implem ented. Add ...

  • Intel D15343-003 - page 76

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 76 D15343-003 4.9.5 RID – Revision Id entification Register This regist er contains the revision n umber of the I n tel ® 82854 GMCH Device #0. These bits are Read Only and W rites to this register have no effect. 4.9.6 RID – Revision Id entification Register This register contains the Sub-C ...

  • Intel D15343-003 - page 77

    Register Descriptio n D15343-003 77 4.9.8 HDR – Header T ype Register This register identifies the header layout of the configuration space. No physical register exists at this location. 4.9.9 SVID – Subsystem V endor Identification Register This value is used to identify the vendor of the subsystem. 4.9.10 SID – Subsystem Identification Regi ...

  • Intel D15343-003 - page 78

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 78 D15343-003 4.9.1 1 CAPPTR – Cap abili ties Pointer Register The CAPP TR provides the offset that is the pointer to the location of the first device capability in the capability li st. 4.9.12 DRB – DRAM Row (0:3) Boundary Register (Device #0) The DDR SDRAM Row Boundary Register defines the ...

  • Intel D15343-003 - page 79

    Register Descriptio n D15343-003 79 4.9.13 DRA – DRAM Row Attri bute Register (Device #0) The DDR SDRAM Row Attribute Register defines the page sizes to be used when accessing different pairs of Rows. Each Nibble of information in the DRA registers describes the page size of a pair of Rows: Row 0, 1: 50h Row 2, 3: 51h 52h-5Fh: Reserved. Address O ...

  • Intel D15343-003 - page 80

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 80 D15343-003 4.9.14 DRT – DRAM Timi ng Register (Device #0) This register controls the timing of the DDR SDRAM controller . Address Offset: Default V alue: Access: Size: 60-63h 18004425h Read/Write 32 bits Bit Description 31 DDR Internal Write to Read Comman d delay (tWTR) : The tWTR is a std. ...

  • Intel D15343-003 - page 81

    Register Descriptio n D15343-003 81 27:26 Back T o Back Read-Write commands spacing (DDR, same or differen t Rows/Bank): This field determines the RD-WR command spacing, in terms of common clocks based on the following formula: CL + 0.5xBL + T A (RD-WR) – DQSS DQSS: is time from Write command to data and is always 1 CK BL: is Burst Length which i ...

  • Intel D15343-003 - page 82

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 82 D15343-003 1 1 Activate to Precharge delay (tRAS), MA X : This bit controls the maximum number of clocks that a DDR S DRAM bank can remain open. Af ter this time period, the system memory Controller will guara ntee to pre-charge the bank. Note that this time period may or may not be set to ove ...

  • Intel D15343-003 - page 83

    Register Descriptio n D15343-003 83 4.9.15 PWRMG – DRAM Controller Po wer Management Control Register (Device #0) Address Offset: Default V alue: Access: Size: 68-6Bh 00000000h Read/Write 32 bits Bit Description 31:24 Reserved 23:20 Row St ate Control: This field determines the number of clocks the System Memory Controller will remain in the idle ...

  • Intel D15343-003 - page 84

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 84 D15343-003 10 Reserved . 9:1 Reserved 0 Power St ate S1/S3 Refres h Control : 0 = Normal Operation, Pending refresh es are not completed before entering Self Refresh for S1/ S3. 1 = All Pending Refreshes plus one extra is per formed before entering Self Refr esh for S1/S3. ...

  • Intel D15343-003 - page 85

    Register Descriptio n D15343-003 85 4.9.16 DRC – DRAM Controller Mode Register (Device #0) Address Offset: Default V alue: Access: Size: 70-73h 00000081h RO, Read/Write 32 bits Bit Description 31:30 Revision Number ( REV): Reflects the revision number of the format used for DDR SDRAM register definition (Read Only). 29 Initialization Complete (IC ...

  • Intel D15343-003 - page 86

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 86 D15343-003 9:7 Refresh Mode Select (R MS) : This field determines whether Refr esh is enabled and, if so, at what rate Refreshes will be executed. 000: Refresh disabled 001: Refresh enabled. Refresh inter val 15.6 µsec 010: Refresh enabled. Refresh inter val 7.8 µsec 01 1: Reserved. 1 1 1: R ...

  • Intel D15343-003 - page 87

    Register Descriptio n D15343-003 87 6:4 Mode Select (SMS). These bits select the special operational mode of the DDR SDRAM Interface. The special modes are intended for initialization at power up. 000: Post Reset S tate – When the GMCH exits Re set (power-up or otherwise ), the mode select field is cleared to 000. Software is not expecte d to Wri ...

  • Intel D15343-003 - page 88

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 88 D15343-003 4.9.17 DTC – DRAM Throttling Control Register (Device #0) Throttling is indepen dent for system me mory banks, GM CH W rites, an d Thermal Sensor Trips. Read and W rite Bandwidth is meas ured independently for each ba nk. If the numb er of Octa l - W ords (16 bytes) Read/Written d ...

  • Intel D15343-003 - page 89

    Register Descriptio n D15343-003 89 Bit Description 31:28 DDR SDRAM Throttle Mode (TMODE) : Four bits control which mechanisms for Throttling are enabled in an “ OR” fashion. Counter- based Throttling is lower priority than Thermal Trips Throttling when both are enabled and T ripped. Counter-based trips point Throttling va lues and Ther mal-bas ...

  • Intel D15343-003 - page 90

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 90 D15343-003 27:24 Read Counter Based Power Throttle Control (RCTC): These bits select the Counter based Power Throttle Bandwidth Limits for Read operatio ns to system memory . R/W , RO if Throttle Lock. 0h = 85% 1h = 70% 2h = 65% 3h = 60% 4h = 55% 5h = 50% 6h = 45% 7h = 40% 8h = 35% 9h = 30% Ah ...

  • Intel D15343-003 - page 91

    Register Descriptio n D15343-003 91 15:12 Write Thermal Based Power Throttle C ontrol (WTTC): These bits select the Thermal based Power Throttle Bandwidth Limits for Write operations to system memory . R/W , RO if Throttle Lock 0h = 85% 1h = 70% 2h = 65% 3h = 60% 4h = 55% 5h = 50% 6h = 45% 7h = 40% 8h = 35% 9h = 30% Ah = 20% B-Fh = Reserved 11 Coun ...

  • Intel D15343-003 - page 92

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 92 D15343-003 4.10 Intel 854 GMCH Configuration Process Registers (Device #0, Function #3) See “Nomenclature for Access Attributes” on page 42 for access nomenclature. T able 23 summarizes all Device#0, Function #3 registers. T able 23. Configuration Pr ocess Configuration S pa c e (Device#0 ...

  • Intel D15343-003 - page 93

    Register Descriptio n D15343-003 93 4.10.2 DID – Device Id entification Register This 16-bit register combined with the V endor Id entification register uniquely iden tifies any PCI device. W rites to this register have no effect. Address Offset: Default V alue: Access: Size: 02-03h 358Ch Read Only 16 bits Bit Descriptions 15:0 Device Identificat ...

  • Intel D15343-003 - page 94

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 94 D15343-003 4.10.3 PCICMD – PCI Command Register Since the Intel ® 82854 GMCH Device #0 does not physically reside on PC I_A many of the bits are not implemented. Address Offset: Default V alue: Access: Size: 04-05h 0006h Read Only , Read/Write 16 bits Bit Descriptions 15:10 Reserved 9 Fast ...

  • Intel D15343-003 - page 95

    Register Descriptio n D15343-003 95 4.10.4 PCISTS – PCI St atus Register PCISTS is a 16-bit status regi ster that reports the occurrence of error events on Device #0's PCI Interface. Bit 14 is Read/W rite clear . All other bits are Read Only . Since GMCH Device #0 does not physically reside on PCI_A many of the bits are not implement ed. Add ...

  • Intel D15343-003 - page 96

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 96 D15343-003 4.10.5 RID – Revision Id entification Register This regist er contains the revision n umber of the I n tel ® 82854 GMCH. These bits are Read Only and W rites to this register hav e no effec t. 4.10.6 SUBC – Sub-Class Code Register This register contains the Sub-Class Code for t ...

  • Intel D15343-003 - page 97

    Register Descriptio n D15343-003 97 4.10.8 HDR – Header T ype Register This register identifies the header layout of the configuration space. No physical register exists at this location. 4.10.9 SVID – Subsystem V endor Identification Register This value is used to identify the vendor of the subsystem. 4.10.10 ID – Subsystem Identification Re ...

  • Intel D15343-003 - page 98

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 98 D15343-003 4.10.1 1 CAPPTR – Cap ab ili ties Pointer Register The CAPP TR provides the offset that is the pointer to the location of the first device capability in the capability li st. 4.10.12 HPLLCC – HPLL Clock C ontrol Register (Device #0) Address Offset: Default V alue: Access: Size: ...

  • Intel D15343-003 - page 99

    Register Descriptio n D15343-003 99 T able 24. Intel ® 82854 GM CH Conf igurations an d Some Resolution Examples: Native Graphics Mode Stra ps Re ad Through HPLLCC[2:0]: D0:F3:Register Offset C0-C1h, bits[2:0] FSB Rate System Memory Frequency GFX Core Clock(Low) GFX Core Clock (High) DVO Port CRT Port 000 400 MHz 266 MHz 200 MHz 1600x1200@85 Hz DC ...

  • Intel D15343-003 - page 100

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 100 D15343-003 4.11 Intel ® 82854 GMCH Integrated Gr aphics Device Registers (Device #2, Function #0) This section contains the PCI configuration regist ers listed in order of ascending offset address. Device #2 incorporates Function #0. See “Nomenclature for Access Attributes” on page 42 fo ...

  • Intel D15343-003 - page 101

    Register Descriptio n D15343-003 101 4.1 1.1 VID – V endor Identifi cation Register (Device #2) The VID Register contains the vendor id enti fication number . This 16-bit register com bin ed with the Device Identification Register uniqu ely identif ies any PCI device. Writes to this register have no effect. 4.1 1.2 DID – Device Identifi cation ...

  • Intel D15343-003 - page 102

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 102 D15343-003 4.1 1.3 PCICMD – PCI Co mmand Register (Device #2) This 16-bit register provide s basic control over the IGD 's ability to respond to PCI cycles. The PCICMD register in the IGD disables the IGD PCI compliant master accesses to main system memory . Address Offset: Default V a ...

  • Intel D15343-003 - page 103

    Register Descriptio n D15343-003 103 4.1 1.4 PCISTS – PCI S tat us Register (Device #2) PCISTS is a 16-bit status regi ster that reports the occurrence of a PCI compliant master abort and PCI compliant target abor t. PCISTS also indicates the DEVSEL# timing that has been set by the IGD. 4.1 1.5 RID – Revision Identifi cation Register (Device #2 ...

  • Intel D15343-003 - page 104

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 104 D15343-003 4.1 1.6 CC – Class Code Register (Device #2) This register contains the devi ce programming interface information related to the Sub-Class code and Base Class code definition for the IGD. This re gister also contains the Base Class code and the function sub-class in relation to t ...

  • Intel D15343-003 - page 105

    Register Descriptio n D15343-003 105 4.1 1.9 HDR – Header T ype Register (Devic e #2) This register contains th e Header T ype of the IGD. 4.1 1.10 GMADR – Graphics Memory Range Address Register (Device #2) IGD graphics system memory base addr ess is specified in this register . Bit Description 7:0 Master Latency Timer Count V alue – RO Addre ...

  • Intel D15343-003 - page 106

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 106 D15343-003 4.1 1.1 1 MMADR – Memory Mapped Range Address Register (Device #2) This register requests allocation for the IGD registers and instruction ports. The allocation is for 512-kB and the base address is defined by bits [31:19]. 4.1 1.12 IOBAR – I/O Base Ad dress Register (Device #2 ...

  • Intel D15343-003 - page 107

    Register Descriptio n D15343-003 107 4.1 1.13 SVID – Subsystem V endor Id entification Register (Device #2) 4.1 1.14 SID – Subsystem Identi fication Register (Device #2) 4.1 1.15 ROMADR – V ideo BIOS ROM Base Address Registers (Device #2) The IGD does not use a separate BIOS ROM, th erefore this register is hardwired to 0's. Address Offs ...

  • Intel D15343-003 - page 108

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 108 D15343-003 4.1 1.16 INTRLINE – Interrupt Line Register (Device #2) 4.1 1.17 INTRPIN – Interrupt Pin Reg ister (Device #2) 4.1 1.18 MINGNT – Minimu m Gr ant Register (Device #2) Address Offset: Default V alue: Access: Size: 3Ch 00h Read/Write 8 bits Bit Description 7:0 Interrup t Connect ...

  • Intel D15343-003 - page 109

    Register Descriptio n D15343-003 109 4.1 1.19 MAXLA T – Maximum Late ncy Register (Device #2) 4.1 1.20 PMCAP – Power Management Cap abilities Register (Device #2) Address Offset: Default V alue: Access: Size: 3Fh 00h Read Only 8 bits Bit Description 7:0 Maximum Latency V alue : Bits[7:0]=00h. The IGD has no specif ic require ments for how often ...

  • Intel D15343-003 - page 110

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 110 D15343-003 4.1 1.21 PMCS – Power Management Cont rol/S tatus Register (Device #2) Address Offset: Default V alue: Access: Size: D4-D5h 0000h Read/Write, Read Only 16 bits Bit Description 15 PME_St atus –RO: This bit is 0 to indicate that IGD doe s not support PME# generatio n from D3 (col ...

  • Intel D15343-003 - page 111

    Intel ® 82854 GMCH System Address Ma p D15343-003 111 5.0 Intel ® 82854 GMCH System Address Map A system based on the GMCH supports 4 GB of addressable system memory space a nd 64 kB+3B of addressable I/O space. The I/O and system memory spaces are di vided by sys tem configuration software into regions. The sy st em memory ranges are useful eith ...

  • Intel D15343-003 - page 112

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 112 D15343-003 5.2 D OS Comp atibility Area This compatibi li t y region is divided into the followi n g addr ess reg ions: • 0 - 640 kB DOS Area • 640 - 768 k B V ideo Buffer Area • 768 - 896 kB in 16-kB sections (total of eight sect ion s) - expansion area • 896 -960 kB in 16-kB section ...

  • Intel D15343-003 - page 113

    Intel ® 82854 GMCH System Address Ma p D15343-003 113 T able 26. System Memory Segmen t s and Their Attributes DOS Area (000000h-0 9FFFFh) The DOS area is 640 kB in size an d is always mapped to the main system memory contr oll e d b y the GMCH. Legacy VGA Ranges (0A0 000h-0BFFFFh) Legacy VGA ranges is accessible when the Intel ® 82854 GMCH is st ...

  • Intel D15343-003 - page 114

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 114 D15343-003 Monochrome Display Adapt er (MDA) Range (0B00 00h - 0B7FFFh) Monochrome Display Adapter ranges is accessible when the Intel® 854 Chipset is strapped into Native Graphics mode. Legacy support req uires the ability to have a second graphics con tro ller (monochrome) in the system. A ...

  • Intel D15343-003 - page 115

    Intel ® 82854 GMCH System Address Ma p D15343-003 115 5.4 Main System Memory Addr ess Range (0010_0000h to T op of Main Memory) The address range from 1 MB to the top of main system memory is map ped to main DDR SDR AM address range controlled by th e GMCH. The GMCH will forward a ll accesses to addresses within this range to the DDR SDRAM unless ...

  • Intel D15343-003 - page 116

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 116 D15343-003 5.4.2.1 Extended SMRAM Address Range (HSEG and TSEG) The HSEG and TSEG SMM transact ion address spaces reside in th is extended system memory area. 5.4.2.2 H SEG SMM mode CPU accesses to enabled HSEG are remapped to 000A0000h-000BFFFFh. N on-SMM mode CPU accesses to enabled HSEG ar ...

  • Intel D15343-003 - page 117

    Intel ® 82854 GMCH System Address Ma p D15343-003 117 5.4.2.5 PCI Memory Addres s Range (T op of Main System Memory to 4 GB) The address range from the top of main DDR SDRAM to 4-GB (top of physical system memory space supported by the GMCH) is normally mapped via the Hub interface to PCI. As an internal graphics c onfiguration, there are two exce ...

  • Intel D15343-003 - page 118

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 118 D15343-003 5.4.3 System Management Mode (SMM) Memory Range The GMCH supports the use of main system me mory as System Management RAM (SMM RAM) enabling the use of System Management mo de. The GMCH supports three SMM options: Compatible SMRAM (C_SMRAM), High Segment (HSEG), and T op of Memory ...

  • Intel D15343-003 - page 119

    Intel ® 82854 GMCH System Address Ma p D15343-003 119 T able 28. SMM Sp ace T ransaction Handling 5.4.4 System Memory Shadowing Any block of system memory that can be designated as Read-Only or W rite-Only can be "shadowed" into GMCH DDR SDRAM. T ypically this is done to allow ROM code to execu te more rapidly out of main DDR SDRAM. ROM ...

  • Intel D15343-003 - page 120

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 120 D15343-003 5.4.5.1 PCI I/O Add res s Ma p pi ng The GMCH can be programmed to direct non-memory (I/O) acces ses to the PCI bus interface when CPU initiated I/O cycle addres ses are within the I/O address ra nge. This range is controlled via the I/O Base Address (IOBASE) and I/O Limit Addr ess ...

  • Intel D15343-003 - page 121

    Intel ® 82854 GMCH System Address Ma p D15343-003 121 5.4.7 Hub Interface Decode Rules The GMCH accepts accesses from Hub interf ace to the following address ranges: • All Memory Read and W rite accesses to Main DDR SDRAM including P AM region (except SMM space) • Memory writes to VGA range (Native Graphics Mode only) All Memory Reads from the ...

  • Intel D15343-003 - page 122

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 122 D15343-003 5.4.7.2 Interface Deco d e Ru le s Cycles Initiated Using PCI Protocol The GMCH does not suppo rt any PCI access targeting Hub interface. The GMCH will claim PCI initiated memory read and write transactions decoded to the main DDR SDRAM range. All other memory read and write reques ...

  • Intel D15343-003 - page 123

    Functional Description D15343-003 123 6.0 Functional Description 6.1 Host Interface Overview The GMCH front side bus uses source synchron ous transfer for the address and data signals. The address signals are doubl e pumped and two addr esses can be generated every bus clock. At 100-MHz bus frequency , the two add ress signals run at 200 MHz fo r a ...

  • Intel D15343-003 - page 124

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 124 D15343-003 MSI is dependent on the address of the interrupt Memory Write. The GMCH forwards inbound Hub interface memory writes to address 0FEEx_xxxxh , to the system bus as Interrupt Message transactions. 6.2.2 Up stream Interrupt Messages The GMCH accepts message based interrupts from its H ...

  • Intel D15343-003 - page 125

    Functional Description D15343-003 125 series of I/O cycles to the south bridge. The BI OS needs to determine the size and type of system memory used for each of the rows of system me mory in order to properly configure the GMCH system memory interface. For SMBus Configuration and Access of the Serial Presen ce Detect Ports, refer to the Intel® 828 ...

  • Intel D15343-003 - page 126

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 126 D15343-003 6.4 Integrated Graphics Overview The Intel ® 82854 GMCH provides a hi ghly integrated graphics accelerator and PCI set while allowing a flexible Integrated System Graphics solution. High bandwidth access to data is provided throu gh the system memory po rt. The GMCH uses a tiling ...

  • Intel D15343-003 - page 127

    Functional Description D15343-003 127 6.4.2 3D Engine The 3D engine of the GMCH has been designed with a deeply pipeli ned architecture, where performance is maximized by allo wing each stage of the pipelin e to simultaneously operate on different primitives or portions of the same primitive. The GM CH su pports the followin g: • Perspective-corr ...

  • Intel D15343-003 - page 128

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 128 D15343-003 The scissor rectangle accelerates th e clipping process by allowing th e driver to clip to a bigger region than the hardware renders to. The scissor rectangle is pixe l accurate, and independent of line and point widt h. The GMCH supports a single scissor box rectangle. 6.4.2.5 Bac ...

  • Intel D15343-003 - page 129

    Functional Description D15343-003 129 6.4.2.10 T exture Chromakey Chromakey is a method for removing a specific color or range of colors fro m a texture map be fore it is applied to an object. For nearest texture filter modes, removing a color simply makes those portions of the object transparent (t he previous contents of the back buf fer show thr ...

  • Intel D15343-003 - page 130

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 130 D15343-003 Maps. T rilinear MIP Mappi ng is used minimize the visibility of LOD transitio ns across the polygon. • Anisotropic MIP Nearest (An isotropic filtering): Th is filter can be used when textured object pixels map back t o significantly non-square reg i ons of the texture (e.g., whe ...

  • Intel D15343-003 - page 131

    Functional Description D15343-003 131 6.4.3.1 T exture Map Blending Multiple textures can be blended together in an iterative process and applied to a primitive. Th e GMCH allows up to four distinct or shared text ure co ordinates and t extur e maps to be specified onto the same polygon. Also, the GMCH supports a texture co ordinate set to access m ...

  • Intel D15343-003 - page 132

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 132 D15343-003 The GMCH supports both types of fog operations, vertex and per pixel. If fog is disabled, the incoming color intensities are passe d un changed to the destination blend u nit. If fog is enabled, the incoming pixel color is blended wit h the fo g color based on a fog coefficient on ...

  • Intel D15343-003 - page 133

    Functional Description D15343-003 133 reasonably accurate depth buf fering within inches of the eye point. The selection of depth buf fer size is relatively independ ent of the color bu ffer . A 16-bit Z/W or 24-bit Z/W buffer can be selected with a 16-bit color buffer . Z bu ffer is not supported in 8-bit mode. 6.4.3.9 S tencil Buffer The Raster e ...

  • Intel D15343-003 - page 134

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 134 D15343-003 Data is horizontally and vertically aligned at the desti nation. If the destination for the BL T overlaps with the source system memory loc ati on, the GMCH can specif y which area in system memory to b egin the BL T transfer . Hardware is included for all 256 raster operations (so ...

  • Intel D15343-003 - page 135

    Functional Description D15343-003 135 6.4.6.1 Cur sor Color For mats Color data can be in an indexed format or a tru e color format. Indexed data uses the entries in the four-entry cursor palette to convert the two-bit inde x to a true col or format bef ore being pas sed to the blenders. The index can optionally sp ecify th at a cursor pixel be tra ...

  • Intel D15343-003 - page 136

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 136 D15343-003 6.4.7.5 Color Con trol Color control provides a method of changing the color characteristics of the pixel data. It is appl ied to the data while in YUV form at and uses input para meters such as brightness, saturation, hue (tint ) and contrast. This feature is supplied fo r the ov ...

  • Intel D15343-003 - page 137

    Functional Description D15343-003 137 6.4.8 V ideo Functionality The GMCH supports MPEG-2 decod ing hardware, sub-picture support and DTV . 6.4.8.1 MPEG-2 Decoding The GMCH MPEG2 D ecoding su pports Hardware Mot ion Compensation (HWM C). The GMCH can accelerate video decoding for the following video coding standards: • MPEG-2 support • MPEG-1: ...

  • Intel D15343-003 - page 138

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 138 D15343-003 6.5 Internal Graphic Display Interface The GMCH has three dedicated disp lay port s: an An al og CR T port and two Digital displ ay ports, DVOB and DVOC. When the GMCH is strapped to operate in Native Graphic Mo de, the DVOB and DVOC can support down stream devices such as TV -out ...

  • Intel D15343-003 - page 139

    Functional Description D15343-003 139 6.5.1.1 ARIB Support Please refer to the ARIB TR-B15 Operational Guid elin es for Digital Satellite Broadcasting (detailed Implementation guideline for receiver) for an exha ustive coverage of this topic ( http://www .arib.or .jp/englis h/html/overview/ov /tr_b15.html ). The Intel ® 82854 GMCH supports the ARI ...

  • Intel D15343-003 - page 140

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 140 D15343-003 6.5.1.3 HSYNC/VSYNC Fiel d Timing The interlace timing is pro vid ed on the timing generator associated with Display Pipe A. When data is being driven out of the device, HSYNC and VSYNC accompanies or frames the data. Interlace timing requires that frame data is sent as two fields. ...

  • Intel D15343-003 - page 141

    Functional Description D15343-003 141 Following conditions should be met for the sync (HSYNC, VSYNC) and blank (HBLANK, VBLANK) signals: • Start of H(V)SYNC can not coin cide with start of H(V)BLANK • H(V)SYNC should always start after H(V)BLANK starts. In interlaced mode, the V ertical T otal (VTOT AL_A register bits 27:16), V ertical Blank En ...

  • Intel D15343-003 - page 142

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 142 D15343-003 6.5.3.2 ARIB 960 X 540 su ppo r t In order to support the conversion of a 960x540 or a 960x1080 Pl ane A buffer to 1920x1080i, the GMCH supports pixe l doub ling in the horizontal directi on and field replication in the vertical direction. In order to activate this functionality , ...

  • Intel D15343-003 - page 143

    Functional Description D15343-003 143 6.5.4 Interlace support for Video Overlay Window In interlace mode, suppo rt fo r Field1 and Field2 timin g generation is supported by th e V ideo Overlay . The V ideo Overlay makes use of the DPODPfieldID signal generated by the Pipe A timing generator to synchro nize the field timing. This signal is used to i ...

  • Intel D15343-003 - page 144

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 144 D15343-003 Figure 1 1 shows how the timing registers switch while the bu ffer 0 and buffer 1 are scanned out. As shown in th e above figure, buffer switching in Multi-display mode occurs on VBLANK. Once VBLANK is detected, horizo ntal and vertical count ers are reset and register switching oc ...

  • Intel D15343-003 - page 145

    Functional Description D15343-003 145 6.5.5 Analog Display Port Characteristics The Analog display port provides an RGB signal output along with an HSYNC an d VSYNC signal. There is an associated DDC signal pair th at is implemented using GPIO pins dedicated to the analog port. The intended target device is for a CR T based monitor with a VGA conne ...

  • Intel D15343-003 - page 146

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 146 D15343-003 ...

  • Intel D15343-003 - page 147

    Power and Thermal Management D15343-003 147 7.0 Power and Thermal Management The Intel ® 82854 GMCH is int ended to be compliant with the following specificatio ns and technologies: • APM Rev 1.2 • PCI Power Management Rev 1.0 • PC'99, Rev 1.0, PC'99A, and PC'01, Rev 1.0 • ACPI 1.0b and 2.0 support • ACPI S0, S1-M, S3 , S4 ...

  • Intel D15343-003 - page 148

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 148 D15343-003 7.1 General Description of Supported CPU St ates C0 (Full On) : This is the only state that runs soft ware. All clocks are running, STPCLK is deasserted, and the processor core is active. The processor can service snoops and maintain cache coherency in this state. C1 (Auto Halt) : ...

  • Intel D15343-003 - page 149

    Power and Thermal Management D15343-003 149 7.3 Internal Thermal Sensor This section describes t he new on-die Thermal sensor capability . 7.3.1 Overview The Thermal sensor functions are provided below: Catastrophic T rip Point : This trip point is programmed through the BIOS durin g ini tial ization. This trip point is set at the temperature at wh ...

  • Intel D15343-003 - page 150

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 150 D15343-003 7.4 External Thermal Sensor Input An External Thermal sensor wi th a serial interface may be placed next to DDR SDRAM DIMM (or any other appropriate plat form location), or a remote Therma l Diode may be placed next to the DDR DIMM (or any other appropriat e platform location) and ...

  • Intel D15343-003 - page 151

    Intel ® 82854 GMC H Strap Pins D15343-003 151 8.0 Intel ® 82854 GMCH Strap Pins 8.1 Strapping Configuration T able 33. S t rapping Signals and Configuration Note: All strap signals are sampled with resp ect to the leading edge of the Intel ® 82854 GMC H PWROK In signal. Pin Name Strap Description Configuration I/F T yp e Buffer T ype ADDID[0] Na ...

  • Intel D15343-003 - page 152

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 152 D15343-003 T able 34. Intel ® 82854 GMCH S trap s for Frequency/CPU Configuration GST[2:0] LCLKCTLB CPU FSB Freq DD R Freq Gfx Freq Core Vcc 000 0 Intel Celeron M Processor Family , Genuine Intel Processor 400MHz 266MHz 200MHz 1.5V 1 1 1 0 Intel Celeron M Processor Family , Genuine Intel Pro ...

  • Intel D15343-003 - page 153

    Ballout and Package Inf ormation D15343-003 153 9.0 Ballout and Package Information Figure 12. Intel ® 82854 GMC H Ballout Di agram (T op View) 2 9 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0 987654321 AJ NC NC VSS VSS VCCSM SMVREF _0 VSS SMVSWI NGL VCCSM VSS SMVSW I NGH VSS VCCSM VCCSM VSS VSS VSS VCCSM VCCQS M VSS ...

  • Intel D15343-003 - page 154

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 154 D15343-003 9.1 VCC/VSS V oltage Group s T able 35. V oltage Lev els and Ball Out for V olta ge Gr oup s Name V oltage Level Ball out VCC 1.5 H14,J15,N14,N16,P13,P15,P17,R14,R16,T13,T15, T17,U14,U16,W21,AA15,AA17,AA19 VCCADAC 1.5 A9,B9 VCCDVO 1.5 E1,E4,E6,H 7,J1,J4,J8,K9,L8,M4,M8,M9,N1,N8,P9,R ...

  • Intel D15343-003 - page 155

    Ballout and Package Inf ormation D15343-003 155 T able 36. Ballout T able Row Co lumn Signal Name Row Column Signal Name Row Colu mn Signal Name E 5 ADDID[0] AA 22 DPWR# G 3 DVOCD[1 1] F 5 ADDID[1] N 24 DRDY# K 3 DVOCD[2] E 3 ADDID[2] B 7 DREFCLK K 2 DVOCD[3] E 2 ADDID[3] B 17 RSVD J 6 DVOCD[4] G 5 ADDID[4] L 2 DVOBBLANK# J 5 DVOCD[5] F 4 ADDID[5] ...

  • Intel D15343-003 - page 156

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 156 D15343-003 Row Column Signal Name Row Column Signal Name Ro w Colum n Signal Name Y 25 HA[21]# F 25 HD[16]# B 23 HD[43]# AA 27 H A[22]# F 26 HD[17]# F 23 HD[44]# W 24 H A[23]# B 27 HD[18]# F 21 HD[45]# W 23 H A[24]# H 23 HD[19]# C 20 H D[46]# W 27 H A[25]# K 25 HD[2]# C 21 HD[47]# Y 27 HA[26] ...

  • Intel D15343-003 - page 157

    Ballout and Package Inf ormation D15343-003 157 Row Co lumn Signal Name Row Column Signal Name Row Colu mn Signal Name K 27 HDSTBP[0]# H 10 HSYNC T 7 MDDCDA T A D 26 HDSTBP[1]# M 25 HTRDY# N 7 MDVICLK E 21 HDSTBP[2]# B 20 HXRC OMP M 6 MDVIDA T A E 18 HDSTBP[3]# B 18 HXSWING K 7 MI2CCLK K 21 HDVREF[0] H 28 HYRCOMP N 6 MI2CDA T A J 21 HDVREF[1] K 28 ...

  • Intel D15343-003 - page 158

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 158 D15343-003 Row Column Signal Name Row Column Signal Name Ro w Colum n Signal Name AD 28 RSTIN# AB 4 SCK[5]# AF 4 SDQ[2] F 12 RSVD AC 7 SCKE[0] AH 7 SDQ[20] D 12 RSVD AB 7 SCKE[1] AD 9 SDQ[21] B 12 RSVD AC 9 SCKE[2] AF 10 SDQ[22] AA 5 RSVD AC 10 SCKE[3] AE 1 1 SDQ[23] L 4 RSVD AD 23 SCS[0]# AH ...

  • Intel D15343-003 - page 159

    Ballout and Package Inf ormation D15343-003 159 Row Co lumn Signal Name Row Column Signal Name Row Colu mn Signal Name AG 22 SDQ[47] AG 2 SDQS[0] AC 21 SRAS# AE 23 SDQ[48] AH 5 SDQS[1] AD 25 SWE# AH 23 SDQ[49] AH 8 SDQS[2] W 21 VCC AE 2 SDQ[5] AE 12 SDQS[3] AA 19 VCC AE 24 SDQ[50] AH 17 SDQS[4] AA 17 VCC AH 25 SDQ[51] AE 21 SDQS[5] T 17 VCC AG 23 S ...

  • Intel D15343-003 - page 160

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 160 D15343-003 Row Column Signal Name Row Column Signal Name Ro w Colum n Signal Name B 14 VCC1_5 AJ 6 VCCQSM AB 6 VCCSM J 13 VCC1_5 AG 29 VCCSM AA 6 VCCSM G 13 VCC1_5 AF 29 VCCSM AJ 5 VCCSM P 9 VCCDVO AC 29 VCCSM Y 4 VCCSM M 9 VCCDVO AF 27 VCCSM AF 3 VCCSM K 9 VCCDVO AJ 25 VCCSM AB 3 VCCSM R 8 V ...

  • Intel D15343-003 - page 161

    Ballout and Package Inf ormation D15343-003 161 Row Co lumn Signal Name Row Column Signal Name Row Colu mn Signal Name AJ 26 VSS U 22 VSS AA 18 VSS AB 26 VSS R 22 VSS J 18 VSS W 26 VSS N 22 VSS F 18 VSS U 26 VSS L 22 VSS AC 17 VSS R 26 VSS J 22 VSS AB 17 VSS N 26 VSS F 22 VSS U 17 VSS L 26 VSS C 22 VSS R 17 VSS J 26 VSS AG 21 VSS N 17 VSS G 26 VSS ...

  • Intel D15343-003 - page 162

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 162 D15343-003 Row Column Signal Name Row Column Signal Name Ro w Colum n Signal Name AB 13 VSS L 9 VSS K 4 VSS U 13 VSS E 9 VSS G 4 VSS R 13 VSS AC 8 VSS D 4 VSS N 13 VSS Y 8 VSS AJ 3 VSS H 13 VSS V 8 VSS AG 3 VSS F 13 VSS T 8 VSS R 2 VSS D 13 VSS P 8 VSS AJ 1 VSS A 13 VSS K 8 VSS AE 1 VSS AJ 12 ...

  • Intel D15343-003 - page 163

    Ballout and Package Inf ormation D15343-003 163 Row Column Si gnal Name H2 2 V T T L F U2 1 V T T L F R2 1 V T T L F N2 1 V T T L F L2 1 V T T L F H2 0 V T T L F A2 0 V T T L F J1 9 V T T L F H1 8 V T T L F A1 8 V T T L F H1 6 V T T L F G1 5 V T T L F ...

  • Intel D15343-003 - page 164

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 164 D15343-003 9.2 Package Mechanical Information Figure 13 through Figure 1 5 provide detail on the package in format ion and dimensions of the Intel ® 82854 GMCH. The Intel ® 82854 GMCH come s in a Micro-FCB GA package, which is similar to the mobile processors. The package c onsists of a sil ...

  • Intel D15343-003 - page 165

    Ballout and Package Inf ormation D15343-003 165 Figure 14. Intel ® 82854 GMCH Micro-FCBGA Pack age Dimensions (Side V iew) ...

  • Intel D15343-003 - page 166

    Intel ® 82854 Graphics Memory Controller Hub (GMCH) 166 D15343-003 Figure 15. Intel ® 82854 GMCH Micr o-FCBGA Package Dimensions ( Bo ttom View) ...

Manufacturer Intel Category Switch

Documents that we receive from a manufacturer of a Intel D15343-003 can be divided into several groups. They are, among others:
- Intel technical drawings
- D15343-003 manuals
- Intel product data sheets
- information booklets
- or energy labels Intel D15343-003
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intel D15343-003.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intel D15343-003, service manual, brief instructions and user manuals Intel D15343-003. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intel D15343-003.

Similar manuals

A complete manual for the device Intel D15343-003, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intel D15343-003 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intel D15343-003.

A complete Intel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intel D15343-003 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intel D15343-003, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intel D15343-003, that we can find in the current document
3. Tips how to use the basic functions of the device Intel D15343-003 - which should help us in our first steps of using Intel D15343-003
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intel D15343-003
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intel D15343-003 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intel D15343-003?

Use the form below

If you did not solve your problem by using a manual Intel D15343-003, ask a question using the form below. If a user had a similar problem with Intel D15343-003 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)