English dropdown-ico

Manual SMC Networks SMCWHSG14-G

178 pages 3.07 mb
Download

Go to site of 178

Summary
  • SMC Networks SMCWHSG14-G - page 1

    USER GUIDE SMCWHSG14 -G Elit eC onnect™ 80 2. 11g W irele ss Hotspot Gat e w a y ...

  • SMC Networks SMCWHSG14-G - page 2

    SMCWHSG14-G User Guide ...

  • SMC Networks SMCWHSG14-G - page 3

    SMCWHSG14-G 2 Copyright Notice Copyright © 2005-2015 SMC NE TWORKS Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior writt en permission. Disclaimer We shall not be liable for technical or editorial errors or omissions c ontained herein; nor for incidental or co ...

  • SMC Networks SMCWHSG14-G - page 4

    SMCWHSG14-G 3 SMC's Limited Warr anty Limited Warrant y Statement: SMC Networ ks, Inc. ("S MC") warrants its products to be free from defects in workmanship and mat erial s, unde r normal use and service, f or the applicable warr anty term. All SMC products carry a standar d 90-day limited warr anty fro m the date of purchase from SM ...

  • SMC Networks SMCWHSG14-G - page 5

    SMCWHSG14-G 4 Customers must con tact SMC for a Return Material Authorization nu mber prior to returni ng any product to SMC. Proof o f purchase ma y be required. A ny product re turned to SMC w ithout a valid Return Material Authorization (RMA) number clearly marked on the outs ide of the package will be returned to custom er at customer's ex ...

  • SMC Networks SMCWHSG14-G - page 6

    SMCWHSG14-G 5 SOME ST A TES DO NOT ALLOW THE EX CLUSION OF IMPLIED WARRANTIES OR THE LIM ITA TION OF INCIDENT AL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE LIMIT A TIONS AND EXCLUSIONS MA Y NOT APPL Y TO YOU . THIS WARRANT Y GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MA Y V ARY FROM ST ATE T O ST A TE. NOTHING IN THIS W ARRANTY SHALL ...

  • SMC Networks SMCWHSG14-G - page 7

    SMCWHSG14-G 6 T able of Contents 1. Introduction ............................................................................................................... ....................... 4 1-1 Package Contents .......................................................................................................... ............... 4 1-2 Features .... ...

  • SMC Networks SMCWHSG14-G - page 8

    SMCWHSG14-G 7 3-2-17 DDNS ................................................................................................................... ......... 129 3-2-18 LAN Devices ............................................................................................................ ..... 131 3-2-19 Syslog .......................................... ...

  • SMC Networks SMCWHSG14-G - page 9

    SMCWHSG14-G 8 1. Introduction The Wireless Hotspot Gateway is a compact intelli gent gateway integrated with a four-port port -based VLAN switch. It provides Plug’ Play Internet access, advanced security and network management. The Wireless Hotspot Gateway is des igned fo r service providers, system integrator or hotspot ven ue operator without b ...

  • SMC Networks SMCWHSG14-G - page 10

    SMCWHSG14-G 9 1-2 Features z Wireless data rates up to 54Mbps z Supports 100 Simultaneous Users z IP Plug and Play (iPnP) z Comprehensive security 64/128-bit WEP encryption WP A encry ption IP/URL filtering z Intelligent Management z Built-in AAA (Authentication/Accounti ng/Authorization) and Billing mechanism Note: The "PnP" Function onl ...

  • SMC Networks SMCWHSG14-G - page 11

    SMCWHSG14-G 10 1-4-1 T op Panel The top panel of the Wireless Hotspot Gateway is shown below . Figure 1-2 Wireless Hotspot Gateway T op Panel ...

  • SMC Networks SMCWHSG14-G - page 12

    SMCWHSG14-G 11 LEDs Indication LED State Description POWER Off The Wireless Hotspot Gateway is not receiving electrical power . Green The Wireless Hotspot Gateway is receiving electrical power . SYS Off The Wireless Hotspot Gateway status is defective. Green The Wireless Hotspot Gateway status is complete. Green (Blinking) During firmware upgrades, ...

  • SMC Networks SMCWHSG14-G - page 13

    SMCWHSG14-G 12 1. RS-232: Reserve for manufacture use. 2. LAN (1-4): The rear panel supports four a uto-sensing RJ-45 por ts and all po rts can be auto-switched to MDI-II connections. The LAN ports used for linking hosts or other network dev ices. The individual port can b e either connected to 100BaseTX networks or 10BaseT networks. When connectin ...

  • SMC Networks SMCWHSG14-G - page 14

    SMCWHSG14-G 13 LED Indicators One POWER LED One W AN 1 0/100M Link/Activity LED Four LAN 10M/100M Link/Activity LEDs One Wireless Link/Activity LED One System LED Power Requirement External Power Adapter Input: 100-240 V AC, 50/60 Hz Output: 5V , 2A Environment Conditio ns Operating T emperature: 0 to 50°C Storage T emperature: -1 0 to 60°C Opera ...

  • SMC Networks SMCWHSG14-G - page 15

    SMCWHSG14-G 14 1-5-2 Software Specificatio ns Networking • IEEE802.3 10BaseT Ethernet • IEEE802.3u 100BaseTX Fast Ethernet • IEEE802.3af P o w e r o v e r E t h e r n e t • IEEE802.1 1b Wireless LAN • IEEE802.1 1g Wireless LAN • Supports 100 Simultaneous Users • IP Plug and Play (iPnP) • HTTP Proxy Support • SMTP Server Redirectio ...

  • SMC Networks SMCWHSG14-G - page 16

    SMCWHSG14-G 15 Security and Firewall • Layer 2 Isolation Security • SSL User Login page/ Configu ration Page • SSL Administration • VPN Pass through (IPSec/PPTP) • Customize SSL Certificate • Pass Through IP/MAC/URL Addres s • Restricted Destination Filtering IP/URL • VPN (IPSec/PPTP) Pass through • PPTP VPN Client • WEP • WP ...

  • SMC Networks SMCWHSG14-G - page 17

    SMCWHSG14-G 16 2. Installation The followings are instructions for setting up the Wire less Hotspot Gateway . Refe r to the illustration and follow the simple steps below to quickly install your Wireless Hotspot Gateway . 2-1 Wall-Mounting The Wireless Hotspot Gateway can be wall-mounted on a wall by applying the two mounting brackets on screws. Fi ...

  • SMC Networks SMCWHSG14-G - page 18

    SMCWHSG14-G 17 2. Mount the device in the rack, using three rack-mountings screws. Note : If the screws are not properly anchored, the stra in of the cables connected to the Wireless Hotspot Gateway rear panel connectors could pull out the Wireless Hotspot Gatew ay from the wall. 2-2 Connecting the Antennas The Wireless Hotspot Gateway provides two ...

  • SMC Networks SMCWHSG14-G - page 19

    SMCWHSG14-G 18 ISP Requireme nts V erify whether your ISP use fixed or d ynamic IP . If it is a fixed IP , be sure to get the IP from your ISP . For dynamic IP , which is mostly used, the PC will get the IP automatically whenever it hooks up on the modem. Dynamic IP z Dynamic IP Setting Fixed IP z Y our fi xed IP address for the Wireless Hotspot Ga ...

  • SMC Networks SMCWHSG14-G - page 20

    SMCWHSG14-G 19 2-4 Getting Start 1. Place the Wireless Hotspot Gateway and AG-200E Printer on a fl at work surface. 2. Connect the Ethernet cable to the Wireless Hotspot Gateway’s LAN port. 3. Connect the other end of the Ethernet cable to t he AG- 200E Account Generator Printer’s RJ45 port. 4. Ensure that your modem and computer are both switc ...

  • SMC Networks SMCWHSG14-G - page 21

    SMCWHSG14-G 20 2-2 POE (Power over Ethernet) Application Figure 2-6 POE Connection Note: T o use the SMCW HSG14-G’s POE feature, follow t he instructions for your specific POE device. ...

  • SMC Networks SMCWHSG14-G - page 22

    SMCWHSG14-G 21 3. Configuring the Wireless Ho tspot Gateway 3-1 Setting Wizard Step 1: Start your browser , and then enter the factory default IP address 192.168.2.1 in your b rowser’s location box. Press Enter . Figure 3-1 Web Browser Location Field (Factory Default) Step 2: The Wireless Hotspot Gateway configurati on tools menu will appear . In ...

  • SMC Networks SMCWHSG14-G - page 23

    SMCWHSG14-G 22 Figure 3-4 System Quick View Click on reset button to clear the username and password data. Note: ) This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers. ) If you would like to change t he password please see Step 10. ) Username and Password can consist of up to 20 alphanu meric characters and are case sensiti ...

  • SMC Networks SMCWHSG14-G - page 24

    SMCWHSG14-G 23 Step 3: Internet Con nection Setting Select the appropriate Internet connection type to connect to your IS P . Figure 3-5 I nternet Connection Setting Screen z DHCP Client The device can work as a DHCP cl ient. This allow s the device to obtain the IP address and other TCP/IP settings from your ISP . If your xDSL/Cabl e comes with th ...

  • SMC Networks SMCWHSG14-G - page 25

    SMCWHSG14-G 24 z Static IP Setting If Static IP Setting is selected, then this screen will appear . Enter the IP address information provided by your ISP . Figure 3-7 Internet Connection Setting Screen—Static IP Setting Item Default Description IP Address 0.0.0.0 Enter the IP address provided by your ISP . Subnet Mask 0.0.0.0 Enter the subnet mas ...

  • SMC Networks SMCWHSG14-G - page 26

    SMCWHSG14-G 25 z PPPoE (Point-to-Point Prot ocol over Ethernet) If “PPPoE” is selected, then this screen will appear . Enter the username, password a nd other major fields. Figure 3-8 Internet Connection Setting Screen—PP PoE Setting Item Default Description Username Empty Enter the user name provided by y our ISP . The u ser name can consist ...

  • SMC Networks SMCWHSG14-G - page 27

    SMCWHSG14-G 26 Item Default Description Connect on Demand and Max Idle T ime Connect on Demand Enable Y ou can configure your Wireless Hotspot Gateway to cut you r connection with your ISP after a spec ified period of time (Max Idle Time). If you have been disconnect ed due to inactivity, Connect o n Demand enables your Wireless Hotspot Gateway to ...

  • SMC Networks SMCWHSG14-G - page 28

    SMCWHSG14-G 27 z PPTP Client (Point-to-Point T unneling Protocol) If “PPTP” is selected, then this screen will appear . Fill out all the information provided by your ISP . Figure 3-9 Internet Connection Setting Screen—PP TP Client Setting Item Default Description My IP Address Empty Enter the PPTP local IP address provided by your ISP . My Su ...

  • SMC Networks SMCWHSG14-G - page 29

    SMCWHSG14-G 28 Item Default Description Gateway IP Address Empty Enter the PPTP server Gateway IP address provided by your ISP . PPTP Server IP Address Empty Enter the PPTP server IP address provided by your ISP . Username Empty Enter the user name provided by your ISP . The us er name can consist of up to 80 alphanumer ic characters and is case se ...

  • SMC Networks SMCWHSG14-G - page 30

    SMCWHSG14-G 29 Step 4: Wireless Setting This page allows you to define ESSID, Channel ID and WEP/WP A encryption for wireless connection. Figure 3-10 Wireless Setting Screen Item Default Description ESSID Wireless The ESSID is the unique name that is shared among all points in a wireless network. It is case sensitive and must not exceed 32 characte ...

  • SMC Networks SMCWHSG14-G - page 31

    SMCWHSG14-G 30 Step 5: E-mail Server Setti ng Wireless Hotspot Gateway allows an extra Email server parameter to for ward the subscriber ’s E-mail. Figure 3-1 1 E-mail Service Setting Screen Item Default Description Email Server Redirect No Disables or enabl es email server redirect function. T o prevent some subscriber ’s orig inal Email serve ...

  • SMC Networks SMCWHSG14-G - page 32

    SMCWHSG14-G 31 Step 6: A uthe ntication Ser vice Setting Figure 3-12 Auth entication Service Setting Screen Item Default Description Built-in Authentication/ No Authentication No No Authentication) Yes ― Wireless Hotspot Gateway provides Built-in Authentication for service provider to build up an Internet service without any extra authentication ...

  • SMC Networks SMCWHSG14-G - page 33

    SMCWHSG14-G 32 Step 7: Billing Profile Setting The function is used to setup a billing profile. A billing profile is a description of how you want to charge your customer . Figure 3-13 Billing Profile Setting Screen Item Default Description Service T ime to Finish Options: Time to Finish or Ac c um u la t i on . Time to Finish ― The subscriber ca ...

  • SMC Networks SMCWHSG14-G - page 34

    SMCWHSG14-G 33 Item Default Description Currency $ Enter the appropriate currency uni t or currency symbol. Number of decimals places 2 Enter the billing decimal value. The field maximum value is 3. No 01~03 The index number of billing profile. In Wizard setup, we provide only 3 billing profile. Name 30 minutes/ 1 hour/ 2 hours It is the name of bi ...

  • SMC Networks SMCWHSG14-G - page 35

    SMCWHSG14-G 34 Figure 3-15 Account Gen erator Printer Step 9: Acco unting Setti ng z Three-buttons Printer Set ting Figure 3-16 Accounting Setting Screen (Thre e Buttons Printer) Button B Button A Button C ...

  • SMC Networks SMCWHSG14-G - page 36

    SMCWHSG14-G 35 Figure 3-17 Billing Profile Setting Screen Item Default Description Button A~ C 01 Define each button’s billing prof ile. Select one billing profile by clicking in the list box. Printout Number of copies to print 1 The system allows you to print all your bills. T his value is number of copies. This function allows you to produce cu ...

  • SMC Networks SMCWHSG14-G - page 37

    SMCWHSG14-G 36 z Web-based Account Genera tor Setting Figure 3-18 Web-based Account Gene rator Setting Screen Item Default Description Billing Profile (Button A~C) Define each button’s billing profile. Select one billing profile by clicking in the list box. Printout Number of copies to print 1 The system allows you to print all your bills. Select ...

  • SMC Networks SMCWHSG14-G - page 38

    SMCWHSG14-G 37 Item Default Description Password account Enter the password for web-based account generator . The password can consist of up to 80 alphanumeric characters and is case sensitive. Confirm Empty Enter the password for confirmation. Click on button to preview and operate account generator panel. Figure 3-19 Account Gen erator Panel Clic ...

  • SMC Networks SMCWHSG14-G - page 39

    38 Figure 3 - 20 Example- A c c c ount Printout S M M CWHSG14-G ...

  • SMC Networks SMCWHSG14-G - page 40

    SMCWHSG14-G 39 Click “View Account List” to display current account information. Figure 3-21 Account List Click on refresh button to update the account list page. The field name button in this list show that this list can be sorted in ascending/descending order according to the corresponding field name. Select the check boxes and click ‘ Dele ...

  • SMC Networks SMCWHSG14-G - page 41

    SMCWHSG14-G 40 Customize Printout Text This function allows you to produce custom bill based on your requirements. Figure 3-22 Customize Printout T ext Setting Screen Click the button to displays the account on t he screen as it would appear when printed. ...

  • SMC Networks SMCWHSG14-G - page 42

    SMCWHSG14-G 41 Figure 3-23 Example- PC-connected printer Printout (Time to Finish) Figure 3-24 Example- PC-connected printer Printout (Accumulation) ...

  • SMC Networks SMCWHSG14-G - page 43

    SMCWHSG14-G 42 Figure 3-25 Example- Account Generator Printer Printout (Time to Finish) Figure 3-26 Example- Account Generator Printer Printout (Accumulation) ...

  • SMC Networks SMCWHSG14-G - page 44

    SMCWHSG14-G 43 Figure 3-27 Example-Post-paid Printout ...

  • SMC Networks SMCWHSG14-G - page 45

    44 Step 10 Item User n Pass w Confi r Syst e Secu r Addr e : System Settin n ame w ord r m m date and tim e r e Administrator e ss Click the b g Figure Default admin admin Empty e YYYY/MM/DD HH:MM:SS IP All b utton to save th e 3-28 System S e Description Enter the user n 80 alphanumeri Enter the user p to 80 alphanum Enter the pass w Click Get fro ...

  • SMC Networks SMCWHSG14-G - page 46

    SMCWHSG14-G 45 3-2 Advanced Setu p The Advanced Setting enables you to configure adv anced settings related to accessing the Internet, including, 1. System 2. W AN/LAN 3. Server 4. Authentication 5. RADIUS 6. Billing 7. Accounting 8. Credit Card 9. Keypad 10. Customization 11. Pass Through 12. Filtering 13. Share 14. Portal Page 15. Advertisement 1 ...

  • SMC Networks SMCWHSG14-G - page 47

    SMCWHSG14-G 46 3-2-1 System Define the Wireless Hotspot Gateway System configuration. Figure 3-30 System Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 48

    SMCWHSG14-G 47 Figure 3-31 System Setting Screen Item Default Description System/Host Name Empty The system name can consist of up to 40 alphanumeric characters. Domain Name Empty The Domain name can consist of up to 80 alphanumeric characters. Location Information Empty Enter your location information. Date/Time Date (Y ear/Month/Day) Syst em Date ...

  • SMC Networks SMCWHSG14-G - page 49

    SMCWHSG14-G 48 Item Default Description NTP Setting Disable Enables or disables NTP (Network T ime Protocol) T ime Server . Network Time Protocol can be utilized to synchronize the time on devices across a network. A NTP T ime Server is utilized to obtain the correct time from a time source and adjust the local time. Server IP/Domain Name Empty Ent ...

  • SMC Networks SMCWHSG14-G - page 50

    SMCWHSG14-G 49 Item Default Description SSL Certificate Default Option: default or customize certificate, These are two ways to create a certificate, one is purchase a certificate from a certificate authority (Ex. V erisig n or Thawte), and another is creating a self-certificate (For example: Uses OpenSSL tool). Click Apply button to save the new s ...

  • SMC Networks SMCWHSG14-G - page 51

    SMCWHSG14-G 50 Figure 3-34 Restart Dialog Box z Device IP (LAN IP) Setting Figure 3-35 Device IP (LAN IP) Setting Item Default Description IP Address 192.168.2.1 The internal LAN IP addr ess of your Wireless Subscriber Server Gateway . Subnet Mask 255.0.0.0 Enter the subnet mask for the IP address. z WAN MAC Address Figure 3-36 WAN MAC Address Sett ...

  • SMC Networks SMCWHSG14-G - page 52

    SMCWHSG14-G 51 DHCP Clie nt The device can work as a DHCP cl ient. This allow s the device to obtain the IP address and other TCP/IP settings from your ISP . If your xDSL/Cabl e comes with this feature, please enable Use DHCP Client. Figure 3-38 DHCP Client Setting Screen Static IP Figure 3-39 Static IP Setting Screen Item Description IP Address En ...

  • SMC Networks SMCWHSG14-G - page 53

    SMCWHSG14-G 52 PPPoE Figure 3-40 PPPoE Setting Screen Item Default Description User Name Empty Enter your PPPoE acc ount name. The user name can consist of up to 80 alphanumeric charac ters and is case sensitive. Password Empty Enter your PPPoE password. The password can consist of up to 80 alphanumeric characters and is case sensitive. PPP MTU Set ...

  • SMC Networks SMCWHSG14-G - page 54

    SMCWHSG14-G 53 Item Default Description Service Name Empty Enter the service nam e provided by your ISP . The service name can consist of up to 64 al phanumeric characters and is case sensitive. Connect on Deman d and Max Idle Time Connect on Dem and Enable You can configure your Wireless Hotspot Gateway to cut your connection with your ISP af ter ...

  • SMC Networks SMCWHSG14-G - page 55

    SMCWHSG14-G 54 z PPTP Figure 3-41 PPTP Setting Screen Item Default Description My IP Address Empty A PPTP local IP address for the xDSL/Cable connection (provided by your ISP). My Subnet Mask Empt y Enter the PPTP local IP address for the xDSL/Cable connection. Gateway IP Address Empty A PPTP local default gateway for the xDSL/Cable connection (pro ...

  • SMC Networks SMCWHSG14-G - page 56

    SMCWHSG14-G 55 Item Default Description Password Empty Enter your PPTP password. The password can consist of up to 80 alphanumeric characters and is case sensitive. PPP MTU Setting 1460 MTU (Maximum Tr ansfer Unit) specifies maximum transmission unit size. TCP MSS Setting 1400 MSS (Maximum Segment Size) specifies maximum segment size. Connection ID ...

  • SMC Networks SMCWHSG14-G - page 57

    SMCWHSG14-G 56 3-2-3 Server Figure 3-42 Server Setting Screen Item Defaul t Description Web Server HTTP Port 80 Enter the HTTP port number . The HTTP port allowed range is 80 or 8010 to 8060. For access the Wireless Hotspot Gateway system under NA T , please tab the “http://HTTP Port IP Address: Port Number”. HTTPS Port 443 Enter the HTTPS port ...

  • SMC Networks SMCWHSG14-G - page 58

    SMCWHSG14-G 57 Item Defaul t Description DHCP Server Enable There are three types of DHCP Services. DHCP Disable—Disable the DHCP server function. DHCP Relay—Enable DHCP Relay function. DHCP Server—Enable DHCP server function. DHCP Relay T o route DHCP through an external server , the administrator needs to enable the DHCP relay and assign a ...

  • SMC Networks SMCWHSG14-G - page 59

    SMCWHSG14-G 58 3-2-4 Authentication Figure 3-43 Auth entication Setting Screen Item Default Description Authentication T ype No Authentication Option: No Authentication, Built-in Authentication or User Agreement. No Authentication ― Subscriber can direct access the Internet without enter username and password. ...

  • SMC Networks SMCWHSG14-G - page 60

    SMCWHSG14-G 59 Item Default Description Authentication T ype No Authentication Built-in Authentication ― Wireless Hotspot Gateway provides “Built-in Authentication” for service provider to build up an Internet service without any extra authentication software. If “Built-in Authentication” is se lected, service provider can generate the su ...

  • SMC Networks SMCWHSG14-G - page 61

    SMCWHSG14-G 60 Copy and paste the following HTML Code into your home page to produce user agreement login page. Figure 3-44 Preview Redirect Login Page Code Item Default Description SSL Login Page Disable Enables or di sables SSL security of login page. User Idle T ime Out 5 Minutes The user idle time out valid range is 1-1440. Click Apply button t ...

  • SMC Networks SMCWHSG14-G - page 62

    SMCWHSG14-G 61 3-2-5 RADIUS A uthe ntic ati on Figure 3-45 Auth entication Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 63

    SMCWHSG14-G 62 Item Default Description RADIUS Authentication Disable Option: No Authentication or RADIUS Server . Disable (No Authentication ) ― Subscriber can direct access the Internet without enter username and password. Enable (RADIUS A ut hentication) ― Wireless Hotspot Gateway provides “RADIUS Authentication” for service provider to ...

  • SMC Networks SMCWHSG14-G - page 64

    SMCWHSG14-G 63 Item Default Description Retry Frequency ~ Seconds 3 The field default value is 3 seconds. Accounting Service Enable Enables or disables the accounting service. Interim Update T ime 5 Minutes Specify the interim update time. Authentication Method CHAP Enter the authentication method of RADIUS server . WISPr Smart Client Enable Disabl ...

  • SMC Networks SMCWHSG14-G - page 65

    SMCWHSG14-G 64 3-2-6 Billing The function is used to setup a billing profile. A billing profile is a description of how you want to charge your customer . Figure 3-46 Billing Setting Screen Item Defaul t Description Pre-Paid Enable The subscribers can acce ss Internet with pre-defined usage time. ...

  • SMC Networks SMCWHSG14-G - page 66

    SMCWHSG14-G 65 If you change billing mode (Pre-paid Æ Post-paid or Post-paid Æ Pre-paid), the system will erase all account and disconnect all on-line users. Figure 3-47 Message Box Item Default Description Enable Credit Card Service Disabl e Enables or disables the credi t card service. Before you enable credit card service, make sure that your ...

  • SMC Networks SMCWHSG14-G - page 67

    SMCWHSG14-G 66 Figure 3-48 Credit Service Setting Screen Figure 3-49 Error Dialog Box (Credit Card Service=Enable) Item Default Description T ime to Finish Enable The subscriber can a ccess Internet only one time with one account. Once subscriber login, the pre- defined usage time will start until run out even the subscriber stop to access the Inte ...

  • SMC Networks SMCWHSG14-G - page 68

    SMCWHSG14-G 67 Item Default Description Accumulation Accumulation Disable The subscriber can acce ss Internet many times with one account. The system can keep and accumulate every single usage time until the pre-defined usage time run out. Idle T ime Out 5 Min(s) The idle time out valid range is 1-1440. If the idle time out is set as 5 minutes, it ...

  • SMC Networks SMCWHSG14-G - page 69

    SMCWHSG14-G 68 Item Default Description No. +1~+10 The index numb er of billing profile. In Advanced setup, we provide 10 billing profile. Active - Click on check box , active or inactive the billing profile. Name - It is the name of billing profile. The maximum allowed characters length is 12. Account Usage time - The duration of the billing perio ...

  • SMC Networks SMCWHSG14-G - page 70

    SMCWHSG14-G 69 Figure 3-52 Post-paid Procedure Diagra m Click Apply button to save the new settings. Click Ap pl y button, the success dialog box appears. Click on Back to return to Billing setting screen. Figure 3-53 Success Dialog Box ...

  • SMC Networks SMCWHSG14-G - page 71

    SMCWHSG14-G 70 3-2-7 Accounting This function allow service provider to generate the subscriber accounts. Figure 3-54 Accounting Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 72

    SMCWHSG14-G 71 Figure 3-55 Item Default Description Expiration Un-used account will be deleted after ~hours automatically 12 hours Enter the number of hours/minutes/days. The field maximum value is 30 hours/minutes/days. Accumulation account will be deleted after logged in ~ 3 months Enter the number and select time unit from list box. The field ma ...

  • SMC Networks SMCWHSG14-G - page 73

    SMCWHSG14-G 72 Figure 3-56 Account Process Diagra m Can be replenished by subscriber=Enable z Three-But ton Printer/ Web-based A ccount Ge nerator Panel Figure 3-57 Three-Button Printer/ Web-based Account Generator Pa nel Setting Screen Item Default Description Button A~C - Define each button’s billing profile. Select one billing profile by click ...

  • SMC Networks SMCWHSG14-G - page 74

    SMCWHSG14-G 73 Item Default Description Use ~ for Discount Price Plan based on “Button Presses” Button A, Disable Select one button (A~C) by clicking in the list box to assign the base charge and select enable to active the discount price plan. Click on button to preview and operate account generat or panel. Figure 3-58 Account Gen erator Panel ...

  • SMC Networks SMCWHSG14-G - page 75

    SMCWHSG14-G 74 Figure 3-60 PC-connected Printer Printout (Time to Finish) ...

  • SMC Networks SMCWHSG14-G - page 76

    SMCWHSG14-G 75 Figure 3-61 Web-based Account Gene rator Printout (Accumulation) ...

  • SMC Networks SMCWHSG14-G - page 77

    SMCWHSG14-G 76 Figure 3-62 PC-connected Printer Printout (Accumulation) Note: Before configuring the accounting, you have to setting the billing profile of Web-based account generator panel. ...

  • SMC Networks SMCWHSG14-G - page 78

    SMCWHSG14-G 77 Example: If press 7 times z Discount Price Plan based on “B utton Presses” is disabled. Figure 3-63 Example 1 Amount: 7 x $2.00= $14.00 Figure 3-64 Account Printout ...

  • SMC Networks SMCWHSG14-G - page 79

    SMCWHSG14-G 78 z Discount Price Plan based on “Button Presses” is enabled. z The Char ge by level is disabled. Figure 3-65 Example 2 Amount: 7 x $ 1 = $ 7.00 ...

  • SMC Networks SMCWHSG14-G - page 80

    SMCWHSG14-G 79 Below is an example of the account printout. Figure 3-66 Account Printout ...

  • SMC Networks SMCWHSG14-G - page 81

    SMCWHSG14-G 80 z Discount Price Plan based on “Button Presses” is enabled. z Charge b y level is enabled. Figure 3-67 Example 3 Amount: 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00 ...

  • SMC Networks SMCWHSG14-G - page 82

    SMCWHSG14-G 81 Below is an example of the account printout. Figure 3-68 Account Printout ...

  • SMC Networks SMCWHSG14-G - page 83

    SMCWHSG14-G 82 z Discount Price Plan based o n “Button Presses ” Figure 3-69 Discount Price Plan Setting Screen Item Default Description Charge by levels Enable Enables or dis ables the charge by levels function. Level 1~10 This field displays t he level number of charge rate. Conditions When>= The discount condition. Button Presses - Enter ...

  • SMC Networks SMCWHSG14-G - page 84

    SMCWHSG14-G 83 Figure 3-70 Success Dialog Box ...

  • SMC Networks SMCWHSG14-G - page 85

    SMCWHSG14-G 84 3-2-8 Credit Card Wireless Hotspot Gateway provides three credit card services ( Authorize.net , iV al idate.net, Secure Pay and Paypal ) that allow service provider to author ize, process, and mana ge credit transactions directly from Internet. Figure 3-71 Credit Card Setting Screen Item Defaul t Description Authorize.net V ersion 3 ...

  • SMC Networks SMCWHSG14-G - page 86

    SMCWHSG14-G 85 Item Defaul t Description Need Disable If your Merchant Provider need password to authorize, click the check box to enable this function. Password Empty Enter your Merchant password. Merchant T ransaction Key Empty The Merchant Transaction Key can be obtained directly from “Authorize.net”. The Merchant Transaction Ke y is similar ...

  • SMC Networks SMCWHSG14-G - page 87

    SMCWHSG14-G 86 Item Defaul t Description Secure Server Address https://www . vious.net/m erchant/proc esscc.asp Enter the secure server address. Secure Pay Merchant ID Empty Enter your Merchant ID . This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 7. Secure Pay ...

  • SMC Networks SMCWHSG14-G - page 88

    SMCWHSG14-G 87 Figure 3-72 Success Dialog Box ...

  • SMC Networks SMCWHSG14-G - page 89

    SMCWHSG14-G 88 Please follow steps below to pay using credit card. Step 1: Choose Credit Card service on the login page. Figure 3-73 Login Page Click Click Select Credit Card Service ...

  • SMC Networks SMCWHSG14-G - page 90

    SMCWHSG14-G 89 Step 2: Select Service and enter payment information. Figure 3-74 Service & Payment Information Setting Screen (Authori ze.net) Item Default Description Payment Information Credit card number Empty Enter your credit card number . Credit card expiration date Empt y Enter the credit card expiration date. The allowed format is MMYY ...

  • SMC Networks SMCWHSG14-G - page 91

    SMCWHSG14-G 90 Figure 3-75 Service & Payment Information Setting Screen (iValidate.net) Item Default Description Payment Information Credit card number Empty Enter your credit card number . Credit card expiration date Empty Enter the c redit card expiration date. The allowed format is MMYY . Enter Email Address Empty Enter your em ail address. ...

  • SMC Networks SMCWHSG14-G - page 92

    SMCWHSG14-G 91 Step 3: After valid payment information has been prov ided, the sub scriber will obtain one valid account to login or the Figure 3-78 screen will appear . Figure 3-76 User Account Information Figure 3-77 ...

  • SMC Networks SMCWHSG14-G - page 93

    SMCWHSG14-G 92 3-2-9 Keypad Figure 3-78 Keypad Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 94

    SMCWHSG14-G 93 Item Default Description Use for Pre-Paid Billing The system provides ten user definable hot keys through the use of the + Key plus the 1 through 0 keys across the top of the ke ypad. Keypad Hot Key +1~+0 It is the combination hot ke y for keypad application. Billing Profile - Select the billing profile you want to assign to the comb ...

  • SMC Networks SMCWHSG14-G - page 95

    SMCWHSG14-G 94 Step 2: Click the Keypad in Advanced Setup Menu, define the Billing plan of pre-paid, and click Ap pl y . Figure 3-80 Keypad’s Hot Key Setting Screen Step 3: Y ou can use keypad to create subscriber accounts now . Press keypad hot key and then press Enter . A new subscriber account is generated, and the account information should b ...

  • SMC Networks SMCWHSG14-G - page 96

    SMCWHSG14-G 95 Step 4: Subscriber can use this account to access Internet now . z Use for Post-Paid Billing Step 1: Click the Billing in the Advanced Setup menu, select enable Post-paid, click Apply . Figure 3-82 Billing Setting Screen Step 2: Click the Keypad in Advanced Setup Menu, Define the billing plan of post-paid, click Ap pl y . Figure 3-83 ...

  • SMC Networks SMCWHSG14-G - page 97

    SMCWHSG14-G 96 Step 3: Y ou can use keypad to create subscriber accounts now . Press Enter , a new subscriber account is generated, and the account information shoul d be printed. This account information is including serial number , username, password and account create time. Figure 3-84 Step 4: When subscriber wants to terminate the Internet serv ...

  • SMC Networks SMCWHSG14-G - page 98

    SMCWHSG14-G 97 Figure 3-86 Keypad’s Hot Key List z Daily A cc ount Report Printout Figure 3-87 Daily Account Press ABCAA Enter the date (MonthDa te) A ccount Generator Printe r PS/2 Ke yp ad B: Billing Profile UN: Purchase Unit ...

  • SMC Networks SMCWHSG14-G - page 99

    98 z Mon t z Syst t hly A ccount R e t em Status Rep o e port Printout Fig o rt Printout Figure 3- 8 ure 3-88 Monthl y 8 9 System Statu s y Account s Report Printou t Pr e P S M t e ss A BCB B P ress A BC C B: Billing Profi UN: Purchase M CWHSG14-G B C C le Unit ...

  • SMC Networks SMCWHSG14-G - page 100

    SMCW H z Net w H SG14-G w ork Report Pri n n tout Figure 3-90 Network R e e port Printout Press AB 99 B CAB ...

  • SMC Networks SMCWHSG14-G - page 101

    SMCWHSG14-G 100 3-2-10 Customization z Login Page The Wireless Hotspot Gateway provides three differ ent login page fo rmats, including standard, redirect, advanced and frame format. Standard For some service providers, they may hope to have a customize subscriber ’s login page to the users. This function helps them to realize the ideal . The pag ...

  • SMC Networks SMCWHSG14-G - page 102

    SMCWHSG14-G 101 Item Default Description Copyright Enable The cop y right is allowed the administrator to input a paragra ph in the subscriber login page for copyright information. The m aximum character of the copyright is 80. Background Color FFFFFF The background text color can be specified color . For the specified text color format please view ...

  • SMC Networks SMCWHSG14-G - page 103

    SMCWHSG14-G 102 Redirect This allow service provider to redirect the subscriber ’s browser to a specified home page. Figure 3-94 Redirect Login Page Setting Screen Copy and paste the following HTML Code into your home page to produce redirect subscriber login page. Figure 3-95 Redirect Login Page Code Screen ...

  • SMC Networks SMCWHSG14-G - page 104

    SMCWHSG14-G 103 Advanced This function allow user to design l ogin page of Wireless Hotspot Gateway . Figure 3-96 Adva nced Login Page Setting Screen Item Default Description Welcome Slogan Welcome The maximum allowed characters length is 80. Page Background None The page back ground can be none or specified color . For the background color format ...

  • SMC Networks SMCWHSG14-G - page 105

    SMCWHSG14-G 104 Figure 3-97 Color Gird Frame If “Frame” is selected the subscriber login page will be separate into T op Frame and Bottom Frame. Bottom Frame is a default format for userna me and password input, T op Fr ame is allowed to be specified a URL to link. Figure 3-98 Frame Login Page Setting Screen Item Default Description T op F rame ...

  • SMC Networks SMCWHSG14-G - page 106

    SMCW H z Log o This fun the stan d I t File Pa H SG14-G o ction allows ser v d ard login page t em D e th Em p Clic Clic Figure 3- 9 v ice provider to u and account pri n Figur e e fault p ty Enter t k Ap pl y butt on t k Delete button t 9 9 Example-Log i u pload the cust o n tout of PC-conn e 3-100 Logo Se t he file pathnam e o save the logo f t o ...

  • SMC Networks SMCWHSG14-G - page 107

    SMCWHSG14-G 106 Figure 3-101 Logo Setting Screen Figure 3-102 Login Page ...

  • SMC Networks SMCWHSG14-G - page 108

    SMCWHSG14-G 107 z Information Window This function allow service provi der can decide whether the y want an “Information Window” pop -up on subscriber PC when authenticate successful or not and specified text of information window . Subscriber can type “http://1.1.1.1/info” to open the information window again or enter “http://1.1.1.1/log ...

  • SMC Networks SMCWHSG14-G - page 109

    SMCWHSG14-G 108 Figure 3-104 Example-Login Page Screen Figure 3-105 Information Window Billing T ype=Time to Finish Can be replenished by subscriber=Disable Figure 3-106 Information Window Billing T ype=Time to Finish Can be replenished by subscriber=Enable ...

  • SMC Networks SMCWHSG14-G - page 110

    SMCWHSG14-G 109 Figure 3-107 Information Window Billing T ype=Accumulation Can be replenished by subscriber=Disable Figure 3-108 Information Window Billing T ype=Accumulation Can be replenished by subscriber=Enable ...

  • SMC Networks SMCWHSG14-G - page 111

    SMCWHSG14-G 11 0 Figure 3-109 Information Window Super Subscriber Account (Defau lt username=”super” & password=”super”) Figure 3-1 10 Lo gout Successfully Dialog Box Billing T ype=Accumulation Figure 3-1 1 1 Alarm Dialog Box1 ...

  • SMC Networks SMCWHSG14-G - page 112

    SMCWHSG14-G 111 z Account Printout This function allow service provider to specified text of account printout. Figure 3-1 12 Account Printout Customization Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 113

    SMCWHSG14-G 11 2 Click Apply button to save the new settings. Click Ap pl y button, the success dialog box appears. Click on Back to return to Account Printout Customization setting screen. Figure 3-1 13 Suc cess Dialog Box Figure 3-1 14 PC -connected Printer Printout ...

  • SMC Networks SMCWHSG14-G - page 114

    SMCWHSG14-G 11 3 Figure 3-1 15 Account Generator Printer Printout Figure 3-1 16 Account Generator Printer Printout ...

  • SMC Networks SMCWHSG14-G - page 115

    SMCWHSG14-G 11 4 z Credit Card Standard Login Page This function allow service provider to customiz e the additional credit card message for the standard login page. Figure 3-1 17 C redit Customization Setting Screen Figure 3-1 18 Sta ndard Login Page (Enable Credit Card Service=enable) ...

  • SMC Networks SMCWHSG14-G - page 116

    SMCWHSG14-G 11 5 Figure 3-1 19 Billing Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 117

    SMCWHSG14-G 11 6 Service Selection Page This function allow service provider to customiz e the additional credit card message for the standard login page. Figure 3-120 Service Selection Page Setting Screen (Authori ze.net) Customer Information ...

  • SMC Networks SMCWHSG14-G - page 118

    SMCWHSG14-G 11 7 Figure 3-121 Service Selection Page Setting Screen (iValidate.net) ...

  • SMC Networks SMCWHSG14-G - page 119

    SMCWHSG14-G 11 8 Figure 3-122 Service Selection Page Setting Screen (Secure Pay) ...

  • SMC Networks SMCWHSG14-G - page 120

    SMCWHSG14-G 11 9 Figure 3-123 Service Selection Page (Authorize.net) ...

  • SMC Networks SMCWHSG14-G - page 121

    SMCWHSG14-G 120 Figure 3-124 Service Selection Page (iV alidate.net) ...

  • SMC Networks SMCWHSG14-G - page 122

    SMCWHSG14-G 121 Figure 3-125 Service Selection Page (SecurePay) ...

  • SMC Networks SMCWHSG14-G - page 123

    SMCWHSG14-G 122 Successful Page Figure 3-126 Successful Page Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 124

    SMCWHSG14-G 123 Figure 3-127 Example-Successful Page Fail Page This function allow service provider to customize the message for the fail page. Figure 3-128 Fail Page Setting Screen Click Apply button to save the new settings. ...

  • SMC Networks SMCWHSG14-G - page 125

    SMCWHSG14-G 124 Figure 3-129 Fail Page Click Ap pl y b utton, the success dialog box appears. Click on Back to return to Credit Card Customization setting screen. Figure 3-130 Success Dialog Box ...

  • SMC Networks SMCWHSG14-G - page 126

    SMCWHSG14-G 125 z User A greement Page This function allow user to design user agr eement page of Internet Subscriber Serve r . Figure 3-131 User Agreement Page Setting Screen Figure 3-132 User Agreement Page ...

  • SMC Networks SMCWHSG14-G - page 127

    SMCWHSG14-G 126 3-2-1 1 Pass Through This function allow administrator to set some special devices pass through the Wireless Hotspot Gateway system. Because some network devices might be constructed unde r the Wireless Hotspot Gateway . Ho wever these devices needn’t be checked and authorized. The Wireless Hotspot Gateway provides a pass through ...

  • SMC Networks SMCWHSG14-G - page 128

    SMCW H Pass Dest i URL o Start End I Sub s Start End I IP A d Subn MAC Mas k Pass No. Activ e Addr e Ty p e Dele t Note: T h H SG14-G Item D Through D i nation UR L/IP A o r Website E IP Address E P Address E s criber IP/MAC A IP Address E P Address E d dress E et Mask E Address E k E Through List D - e D e ss List - - t e D Click A Click Apply b C ...

  • SMC Networks SMCWHSG14-G - page 129

    SMCWHSG14-G 128 3-2-12 Filtering Filtering allows the system administrator to have a lis t of restricted destinations, which is useful to block specified Internet websites or Intranet areas. Figure 3-134 Filtering Setting Screen Item Default Description Filtering Disable Enables or disables filtering function. HTTP Message to display when a website ...

  • SMC Networks SMCWHSG14-G - page 130

    SMCW H Restri c URL o r Start I P End I P IP Ad d Subne No Active Addre s Delete Note: T h H SG14-G Item Def a c t Destination r Website Em p P Address Em p P Address Em p d ress Em p t Mask Em p - Dis a s s List - Dis a Click Ad Click Apply Click De l h e priority of "pa s a ult p ty Enter t such li k URL P a p ty Enter t h p ty Enter t h p t ...

  • SMC Networks SMCWHSG14-G - page 131

    SMCWHSG14-G 130 3-2-13 Share This feature allows sharing the network dev ices after subscriber successful login. Figure 3-136 Share Device Setting Screen Item Default Descrip tion Share LAN resource Disable Enables or di sables share LAN re source function. Resource Name Empty Enter the device name. The maximum character of the resource name is 30. ...

  • SMC Networks SMCWHSG14-G - page 132

    SMCWHSG14-G 131 Note: 1. Y ou must use the “ Search IP ” method to search for a device on the netwo rk. Please follow steps below to search your device. ) Click Start , and then click Search . ) Click Computers or People . ) Click “ A computer o n the network ”. ) In Computer , type the IP address of the device you want to find. Click Searc ...

  • SMC Networks SMCWHSG14-G - page 133

    SMCWHSG14-G 132 3-2-15 Advertisement The system allow service provider to input 10 URL links for advertisement link purpose. Figure 3-139 Adv ertisement URL Link Setting Screen Item Default Description Frequency One Time Only One T ime Only—One Time Only means to send the advertisement link once after the subscriber Login. Every~Min(s)—The fiel ...

  • SMC Networks SMCWHSG14-G - page 134

    SMCWHSG14-G 133 Click Appl y button, the success dialog box appea rs. Click on Back to return to Advertisement URL Link setting screen. Figure 3-140 Success Dialog Box 3-2-16 Walled Garden We prepare ten URL links that allows subscriber to access the specific Web pages even they didn’t have a username or password. It’s free trying and can use f ...

  • SMC Networks SMCWHSG14-G - page 135

    SMCWHSG14-G 134 Figure 3-141 Walled Garden ...

  • SMC Networks SMCWHSG14-G - page 136

    SMCWHSG14-G 135 Figure 3-142 Login Page Item Description Link 1~10 Name The name is allowed user to set the pr ompt string in user customize login page. The maximum allowed characters length is 80. URL 1~10 The input format can be “http:// www .yahoo.com”. The maximum c haracter of the Link# is 200. Click Ap p l y button, the success dialog box ...

  • SMC Networks SMCWHSG14-G - page 137

    SMCWHSG14-G 136 3-2-17 DDNS The DDNS service (Dynamic Domain Name Service), an IP Registry provides a public central database where information such as email addresses, host nam es, IP addresses etc. can be stored and retrieved. This solves the problems if your DNS server uses an IP associated with dynamic IP addresses. When the ISP assigns the Wir ...

  • SMC Networks SMCWHSG14-G - page 138

    SMCWHSG14-G 137 Item Default Description Force to update every ~day(s) when WAN IP address keeps no change 1 day Enter a numbe r in the field to set the force update interval (in days). No 01~03 The index number of a DDNS ac count. Active Disable Click on check box, ac tive or inactive the DDNS record. Click the Update Status Now button to do manua ...

  • SMC Networks SMCWHSG14-G - page 139

    SMCWHSG14-G 138 Click Ap pl y button, the success dialog box appears. Click on Back to return to DDN S setting screen. Figure 3-145 Success Dialog Box 3-2-18 LAN Devices Administrator can direct remote control to LA N Devices via the Wireless Hotspot Gateway implemented the feature. Figure 3-146 LAN Devices Setting Screen Item Defaul t Descrip tion ...

  • SMC Networks SMCWHSG14-G - page 140

    SMCWHSG14-G 139 1440. Item Defaul t Descrip tion Device Name Empty The LAN device name. The maxi mum character of the device nam e is 20. Virtual Port 0 The virtual port number valid range is 60001 to 60050 or 5900 to 5910. Device IP Address Empty Enter the IP address of LAN device in the form at “x xx. x xx. xxx.x xx” Device Server Port 0 Ente ...

  • SMC Networks SMCWHSG14-G - page 141

    SMCWHSG14-G 140 3-2-19 Syslog The function allows the device to transmit event mess ages to your sy slog server or your email addre ss for monitoring and troubleshooting. z Syslog Setting Figure 3-147 Syslog Setting Screen Item Default Description Syslog Disable Enables or disabl es the syslog server function. Syslog on LAN Server IP Address Empty ...

  • SMC Networks SMCWHSG14-G - page 142

    SMCWHSG14-G 141 Item Default Description Syslog on W AN Server 1 IP Address Empty Enter IP address of first syslog server . Server 2 IP Address Empty Enter IP address of second s yslog server . Send to Email Disable Enables or disables the send to e-mail function. E-mail Server IP Address or Domain Name Empty Enter the SMTP server IP address or dom ...

  • SMC Networks SMCWHSG14-G - page 143

    SMCWHSG14-G 142 z Log Categories Figure 3-149 Log Settings Screen Item Interval Time Description Syslog Disable Click on check box, send log information to your syslog server . Email Disable Click on c heck box, send log information to your e-mail address. ...

  • SMC Networks SMCWHSG14-G - page 144

    SMCWHSG14-G 143 Item Interval Time Description Syst em Syslog Information 60 minutes The log included sy stem informati on would be sent according to specified interval time. Format: (Id, Mac Address) (System Uptime, 0 days 00h:04m:00s) (Location Name, Location Name) (WAN, FrameTxOK, FrameRxOK, FrameTxErr or , FrameRxError) (LA N, FrameTxOK, FrameR ...

  • SMC Networks SMCWHSG14-G - page 145

    SMCWHSG14-G 144 Item Interval Time Description Logged-in Users 60 minutes A log included logged- in users information would be sen t according to specified interval time. Format: (Id, Mac Address) (Logged-in Users, T ype, Number o f logged-in users, Start Number , End numbe r) (Username, User IP , User MAC, Interfac e, Login time, RxData count, TxD ...

  • SMC Networks SMCWHSG14-G - page 146

    SMCWHSG14-G 145 Subscriber T race Relations hip Ty p e Even t Time Le f t T imeT oFinish Finished 00:00:00 T imeT oFinish Replenished 00:12:00 to S/Nxxxxxx T imeT oFinish Deleted 00:12:00 Accumulation Finished 00:00:00 Accumulation Replenished 00:12:00 to S/Nxxxxxx Accumulation Logout 00:48:00 Accumulation Idle-T imeout 00:48:00 Accumulation Delete ...

  • SMC Networks SMCWHSG14-G - page 147

    SMCWHSG14-G 146 Item Interval Time Description LAN Devices Managemen t Categor y LAN Devices Information 60 minutes A log includ ing current LAN Devices Status will be sent according to specified interval time. Format: (Id, MAC Address) (LAN Devices Information, Number of devices, Start Number , End number) (Device name, Status)(…)(…) LAN Devic ...

  • SMC Networks SMCWHSG14-G - page 148

    SMCWHSG14-G 147 3-2-20 Session Trace Session T race is an intelligent function to help servic e provider to trace ever y user’s access behavior . When “session trace” is enable , the system will collect information such li ke destination IP , destination port, source IP , source MAC, source port by ever y user and send the collected informati ...

  • SMC Networks SMCWHSG14-G - page 149

    SMCWHSG14-G 148 3-2-21 Bandwidth The function enables administrator to limit bandwi dth usage on a per user basis (MAC address). That prevents users from consuming a disproportionately large amount of band width so every user gets a fair share of the available bandwidth. Figure 3-152 Bandwidth Setting Screen Item Defaul t Description Bandwidth Disa ...

  • SMC Networks SMCWHSG14-G - page 150

    SMCW H 3-2-22 S This fea PPTP C secure c Auto - Start - conn e PPT P addr e User n Pass w VPN Clien t H SG14-G S ecure Remote ture allows you C lient. If “Secur e c onnection. Item - connect at - up (Always e ct) P Server IP e ss n ame w ord Tunnel t IP to create a sec u e Remote” is en a Figure 3-1 5 Default Disable En a con n Empty Ent e Empt ...

  • SMC Networks SMCWHSG14-G - page 151

    SMCWHSG14-G 150 3-2-23 SNMP The SNMP Agent Configuration screen en ables you to access to your device via Simple Network Management Protocol. If you are not familiar with SNMP , please consult your Ne twork Administrator or consult SNMP reference material. You must fi rst enable SNMP on the SNMP Agent Configuration screen. Figure 3-154 SNMP Setting ...

  • SMC Networks SMCWHSG14-G - page 152

    SMCWHSG14-G 151 Item Default Description Privileges Read/Write Choose “Read”, “Write”, “Trap R ecipients” and “All” for different privileges. The default setting of the entry 2 is “write” and others are “read”. Status V alid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others a ...

  • SMC Networks SMCWHSG14-G - page 153

    SMCWHSG14-G 152 3-2-24 Wireless Figure 3-155 Wireless Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 154

    SMCWHSG14-G 153 Item Default Description General Settings ESSID Wireless The ESSID is the unique name that is shared among all points in a wireless network. It is case sensitive and must not exceed 32 characters. Channel 6 Select the channel ID for wireless connection. Security Disable Select disable to allow w ireless station to communicate with t ...

  • SMC Networks SMCWHSG14-G - page 155

    SMCWHSG14-G 154 Item Default Description WEP Key 1 This selects which of the Keys the Wireless Hotspot Gateway uses when it transmits. Y ou can change the selected encryption key every now and then to increase the security of your network. Note: Y ou have to configure all WEP keys (1~4), and select one of the four WEP key . Enter 5 characters (case ...

  • SMC Networks SMCWHSG14-G - page 156

    SMCWHSG14-G 155 Item Default Description Fragmentation Threshold 2432 This setting determines the size at which packets are fragmented. Enter a setting ranging from 256 to 2432 bytes. Use a low setting in areas where communication is poor or where there is a great deal of radi o interference. Preamble T ype Long Preamble The preamble type is a sect ...

  • SMC Networks SMCWHSG14-G - page 157

    SMCWHSG14-G 156 Click Ap pl y button, the restart dialog box appears . Click on Ap pl y to restart the system. Figure 3-156 Restart Dialog Box This operation will load the default manufacturer configuration to the system. All this page (Wireless) configuration setup w ill be replaced by default settings. 3-2-25 Account Generator Figure 3-157 Accoun ...

  • SMC Networks SMCWHSG14-G - page 158

    SMCWHSG14-G 157 Figure 3-158 Application 3-3 System Stat us Display Wireless Hotspot Gatew ay system basic status, including, 1. System 2. Account List 3. Account Log 4. Current User 5. DHCP Clients 6. Session List 7. LAN Devices Figure 3-159 System Status Item Screen ...

  • SMC Networks SMCWHSG14-G - page 159

    SMCWHSG14-G 158 3-3-1 System The System Information Menu displays current s ystem basic information including the service connection message, host name, LAN, W AN, DHCP C onfiguration, DNS, E-mail Redirection, SSL Certificate, network traffic Information and the system firmware version number. Figure 3-160 System Status Screen ...

  • SMC Networks SMCWHSG14-G - page 160

    SMCWHSG14-G 159 Figure 3-161 System Status Screen ...

  • SMC Networks SMCWHSG14-G - page 161

    SMCWHSG14-G 160 3-3-2 Account List Y ou can display a list of all the account informati on on this device. This t able includes the username, password, usage time, time created, l ogin time, expiration time and status. Figure 3-162 Account List Click on refresh button to update the account list page. Click the column button to sort the column in as ...

  • SMC Networks SMCWHSG14-G - page 162

    SMCWHSG14-G 161 3-3-3 Account Log The account log shows the accounts’ log information. Figure 3-163 Account Log This allow you to export the account logs to a text file format. (export.log) Click on Clear Log to remove all account log entries. Click on refresh button to update the account log page. Click the column button to sort the column in as ...

  • SMC Networks SMCWHSG14-G - page 163

    SMCWHSG14-G 162 3-3-4 Current User Display the current logged-in subscribers’ stat us. It allow service provider to disconnect any subscribers. Figure 3-164 Current User List Figure 3-165 Current User List (super account) Figure 3-166 Current User List (No Authentication) Click on refresh button to update the current user list page. Click the col ...

  • SMC Networks SMCWHSG14-G - page 164

    SMCWHSG14-G 163 3-3-5 DHCP Clients The DHCP client table shows the current DHCP users on the LAN. Figure 3-167 Current User Screen 3-3-6 Session List The remote site administrator could monitor the real time usage status of Wireless Hotspot Gateway via this page. Figure 3-168 Session List Screen ...

  • SMC Networks SMCWHSG14-G - page 165

    SMCWHSG14-G 164 3-3-7 LAN Devices Y ou can manage all devices by clicking on devic e name to access device’s Web-based interface. Figure 3-169 LAN Devices Status Screen Figure 3-170 Example- Ethernet Switch Management Screen 3-4 System T ools This allows service provider or administrato r to process Firmware upgrade, change password and backup or ...

  • SMC Networks SMCWHSG14-G - page 166

    SMCWHSG14-G 165 3-4-1 Configuration Use the Configuration item to save, restore or re set configuration paramete rs of the Wireless Hotspot Gateway . Figure 3-172 Configuration Setting Screen Item Defaul t Description Backup Click it to save the system configuration to your computer . (export.cfg) Remote TFTP Server IP Address Empty Enter the IP ad ...

  • SMC Networks SMCWHSG14-G - page 167

    SMCWHSG14-G 166 3-4-2 Firmware Upgrade The Firmware Upgrade menu loads updated firmware to be permane nt in flash ROM. The download file should be a binary file from factory; otherwise t he agent will not accept it. After downloading the new firmware, the agent will automatically restart it. z Manual Firmware Upgrade Figure 3-173 Manual Firmware Up ...

  • SMC Networks SMCWHSG14-G - page 168

    SMCWHSG14-G 167 z Scheduled Firmware Upgrade Scheduled Firmware Upgrade is a program that e nabl es an automatic upgrade to the latest firmwar e version through the TFTP server . Figure 3-174 Scheduled Firmware Upgrade Setting Screen Item Defaul t Description Disable/Enable Disables or enables t he scheduled firmware upgrade function. TFTP Server I ...

  • SMC Networks SMCWHSG14-G - page 169

    SMCWHSG14-G 168 3-4-3 Boot Code Figure 3-176 Boot Code Upgrade Setting Screen 3-4-4 System Account Use the System Account screen to change the system accounts. Figure 3-177 System Account Setting Screen ...

  • SMC Networks SMCWHSG14-G - page 170

    SMCWHSG14-G 169 Item Description Username The username can consist of up to 20 alphanume ric characters and is sensitive. Password The password can consist of up to 20 alphanumeric characters and is sensitive. Confirm The password for confirmation. Super Subscriber Disables or enab les the super account function. Idle Time Out The user idle time ou ...

  • SMC Networks SMCWHSG14-G - page 171

    SMCWHSG14-G 170 Or Figure 3-180 System Quick View z Web-Based Accounting Man ager Step 1: Start your Web browser and enter the factory default IP address 192.168.2.1 in y our browser’s location box. Press Enter . Figure 3-181 Web Browser Locati on Field (Facto ry Default) ...

  • SMC Networks SMCWHSG14-G - page 172

    SMCWHSG14-G 171 Step 2: The Wireless Hotspot Gateway configuration main menu will appear . Enter accou nt as the Username and account as the pa ssword and click Login Figure 3-182 Web-Based Accounting Manager Log in Screen Step 3: After a valid user name and password have been provided, the account Gen erator Panel homepage will appear . Figure 3-1 ...

  • SMC Networks SMCWHSG14-G - page 173

    SMCWHSG14-G 172 z Supervisor Account Step 1: Start your Web browser and enter the factory default IP address 192.168.2.1 in your browser ’s location box. Press Enter . Figure 3-184 Web Browser Locati on Field (Facto ry Default) Step 2: The Wireless Hotspot Gateway configuration main men u will appear . Enter super visor as the Username and super ...

  • SMC Networks SMCWHSG14-G - page 174

    SMCWHSG14-G 173 z Super Subscriber A c count Start your Web Browser; a subscriber login page will appear . Enter super as the Username and super as the password and click Enter , you can use Internet now . Figure 3-187 Subscriber Login Page 3-4-5 SSL Certificate The function allows you to download the registered CA certificate into the Wireless Hot ...

  • SMC Networks SMCWHSG14-G - page 175

    SMCWHSG14-G 174 3-4-6 Pin Command The Ping function can check the Wireless Ho tspot Gateway networking connective or not. Figure 3-189 Ping Command Screen Item Description IP or URL Enter the IP address or the URL link. 3-4-7 Restart If your Wireless Hotspot Gateway is not operating co rrectly, you can choose this option to display the restart Wire ...

  • SMC Networks SMCWHSG14-G - page 176

    SMCWHSG14-G 175 Appendix A Signal Connection Arrangements RJ-45 Ethernet Port The Wireless Hotspot Gateway RJ-45 Ethernet po rt can connect to any network ing devices that use a standard LAN interface, such as a Hub/S witch Hub or Router . Use unshiel ded twisted-pair (UTP) or shield twisted-pair (STP) cable to connect the net working device to the ...

  • SMC Networks SMCWHSG14-G - page 177

    SMCWHSG14-G 176 Appendix B Regulations/EMI Compliance FCC Regulator y Statement Part 15-Class B compliant device This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not caus e harmful interference, and 2. This device must accept any interference re ceived, including that which may ...

  • SMC Networks SMCWHSG14-G - page 178

    TE CHNICAL SUPPORT F rom U .S.A. and Canada (2 4 hours a day , 7 day s a week) Phn: 800-SMC -4- Y OU / 94 9-6 79-8000 F ax: 94 9-502 - 3400 ENGLISH T echnical Support in formation av ailable at www .smc.com FRENCH Inf ormations Support T echnique sur www .smc. com DEUTSCH T echnischer Support und weit ere In formation unter www .smc.com SP ANISH En ...

Manufacturer SMC Networks Category Network Card

Documents that we receive from a manufacturer of a SMC Networks SMCWHSG14-G can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- SMCWHSG14-G manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks SMCWHSG14-G
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks SMCWHSG14-G.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks SMCWHSG14-G, service manual, brief instructions and user manuals SMC Networks SMCWHSG14-G. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks SMCWHSG14-G.

Similar manuals

A complete manual for the device SMC Networks SMCWHSG14-G, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks SMCWHSG14-G by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks SMCWHSG14-G.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks SMCWHSG14-G - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks SMCWHSG14-G, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks SMCWHSG14-G, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks SMCWHSG14-G - which should help us in our first steps of using SMC Networks SMCWHSG14-G
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks SMCWHSG14-G
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks SMCWHSG14-G in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks SMCWHSG14-G?

Use the form below

If you did not solve your problem by using a manual SMC Networks SMCWHSG14-G, ask a question using the form below. If a user had a similar problem with SMC Networks SMCWHSG14-G it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)