-
Sony DSR250P - page 1
3-064-678- 34 (1) Digital Camcor der Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. DSR-250P ©2000 Sony Corporation DSR-250P ...
-
Sony DSR250P - page 2
2 Welcome! Congratulations on your purchase of this Sony Digital camcorder. With your Digital camcorder, you can capture life’s precious moments with superior picture and sound quality. Your Digital camcorder is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for ...
-
Sony DSR250P - page 3
3 T able of contents Getting started Using this manual ............................................... 4 Checking supplied accessories ......................... 6 Step 1 Installing the microphone ..................... 7 Step 2 Preparing the power supply ................ 8 Step 3 Inserting a cassette ............................... 13 Recording – ...
-
Sony DSR250P - page 4
4 — Getting started — Using this manual As you read through this manual, buttons and settings on your camcorder are shown in capital letters. e.g. Set the POWER switch to ON. When you carry out an operation, you can hear a beep or a melody sound to indicate that the operation is being carried out. Note on cassette memory Your camcorder is based ...
-
Sony DSR250P - page 5
5 Getting started Using this manual Note on TV colour systems TV colour systems differ from country to country. To view your recordings on a TV, you need a PAL system-based TV. Copyright precautions Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provis ...
-
Sony DSR250P - page 6
6 Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 12 3 4 56 7 1 Wireless Remote Commander (1) (p. 188) 2 R6 (Size AA) battery for Remote Commander (2) (p. 189) 3 Memory Stick Reader/Writer (1), Stand (1), Specified extension cable (1), Driver software (CD ROM) (1) You cannot use the “PIXELA ...
-
Sony DSR250P - page 7
7 Getting started Step 1 Installing the micr ophone Install the supplied microphone. Be sure to connect the microphone plug to the MIC IN +48V connector. ( 1 ) Attach the wind screen to the microphone. ( 2 ) Loosen the microphone holder screw and open the cover. ( 3 ) Place the microphone into the holder with the model name (ECM-NV1) facing upward, ...
-
Sony DSR250P - page 8
8 Step 2 Preparing the power supply The following power supplies can be used with the camcorder. • BP-L40 (A)/L60A/L90A lithium-ion battery pack • NP-1B Ni-Cd Battery Pack (The DC-L1Battery Adaptor is required.) • BP-90A Ni-Cd Battery Pack (The DC-L90 Battery Adaptor is required.) • AC power (The AC-550CE, AC-DN1/DN2A, or CMA-8ACE AC Adapto ...
-
Sony DSR250P - page 9
9 Getting started Installing the battery pack ( 1 ) Attach the battery pack against the rear of the camcorder, aligning the side line of the battery pack with the line on the camcorder. ( 2 ) Slide the battery pack down until its “ b LOCK ” arrow points at the matching line on the camcorder. To remove the battery pack Holding the battery releas ...
-
Sony DSR250P - page 10
10 Step 2 Preparing the power supply Setting up the type of the battery pack Set up the type of the battery pack installed to the camcorder, using the menu. If you do not set the type, the battery remaining indicator will not indicate the correct capacity. ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the ...
-
Sony DSR250P - page 11
11 Getting started Using an AC adaptor When using an AC-550CE AC Adaptor Connect the camcorder to the AC power supply as shown in the following figure, and turn the POWER switch of the AC-550CE ON. When using an AC-DN1 AC Adaptor Mount the AC-DN1 on the camcorder in the same way as a battery pack, then connect to the AC power source. Note When tota ...
-
Sony DSR250P - page 12
12 Step 2 Preparing the power supply Avoiding breaks in operation due to dead batteries If you use both an internal battery pack and an external battery connected to the DC IN 12V connector at the same time, you can avoid breaks in operation due to the dead batteries. When the external battery begins to fail and an internal battery pack is installe ...
-
Sony DSR250P - page 13
13 Getting started Step 3 Inserting a cassette The camcorder can use standard-size and mini-size DVCAM/DV cassettes. Before inserting a cassette, make sure that no cassette is in the cassette compartment. Inserting a cassette forcibly may damage internal parts of the camcorder. ( 1 ) Install the power source (p. 8). ( 2 ) While sliding OPEN in the ...
-
Sony DSR250P - page 14
14 Note Internal parts of the camcorder may become bent or otherwise damaged if you attempt to insert a mini-size cassette in the wrong direction (such as with the cassette turned backside front so the reel holes face the cassette holder window or with the cassette turned sideways so that a short side enters first). When you use cassettes with cass ...
-
Sony DSR250P - page 15
Recording – Basics 15 5 REC 00:00:00:01 DVCAM 32K S T A R T / S T O P SHUTTER GAIN UP TAKE BATT REC TALLY Li 1 MEMORY VTR CAMERA 34 POWER ON OFF TALLY lamps Microphone — Recording – Basics — Recor ding a picture Your camcorder automatically focuses for you. ( 1 ) Remove the hood cap and pull the hood cap string to fix it. ( 2 ) Install the ...
-
Sony DSR250P - page 16
16 Recording a picture To turn off the TALLY lamps When you turn off the TALLY lamp located on the viewfinder, set the TALLY switch located on the front of the viewfinder to OFF, and when you turn off the TALLY lamp located on the rear, set the TALLY switch located below the TALLY lamp to OFF. The intensity of the front TALLY lamp can be chosen fro ...
-
Sony DSR250P - page 17
Recording – Basics 17 Using the ND filter Using the ND filter (the ND filter 1 setting corresponds to 1/4 of the quantity of light and the ND filter 2 setting corresponds to 1/32 of the quantity of light), you can record a picture clearly by adjusting light amounts, even if you shoot under too bright conditions. When the ND1 or ND2 indicator flas ...
-
Sony DSR250P - page 18
18 Usable cassettes The camcorder can use standard-size and mini-size DVCAM/DV cassettes. (To ensure high-quality playback, editing, and storage of recorded contents, we recommend using highly reliable DVCAM cassettes). The following table lists the cassettes that can be used in the camcorder. Model name Cassette size PDV-64ME/64MEM/64N/94ME/124ME/ ...
-
Sony DSR250P - page 19
Recording – Basics 19 Adjusting the viewfinder position To adjust the viewfinder left-to-right position, loosen the left-to-right positioning ring, and to adjust the front-to-back position, loosen the front-to-back position locking knob. Left eye adaptor By fitting a left eye adaptor, you can use the camcorder with your left eye to the viewfinder ...
-
Sony DSR250P - page 20
20 Recording a picture Eyepiece focus adjustment Depending on the eyesight of the operator — whether longsighted or shortsighted — the optimal position of the viewfinder image varies. Adjust the eyepiece focus to get the clearest viewfinder image for your eyesight. First focus the image with the lens, then adjust the eyepiece focusing knob. The ...
-
Sony DSR250P - page 21
Recording – Basics 21 Contrast and brightness adjustment Carry out these adjustments with the color bars displayed. ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu in standby or recording mode. ( 2 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 3 ) Turn the SEL/PUSH EXEC dial to ...
-
Sony DSR250P - page 22
22 Using the LCD screen While sliding OPEN in the direction of the battery pack, then open the LCD panel. The picture being shot is displayed on the LCD screen. To turn off the LCD screen, set the LCD switch to OFF or close the LCD panel with the LCD screen facing toward the camcorder body. The LCD panel is opened up to 90 degrees and it rotates ab ...
-
Sony DSR250P - page 23
Recording – Basics 23 Recording a picture Adjusting the brightness of the LCD screen To adjust the brightness of the LCD screen, press LCD BRIGHT + or – . Even if you do the LCD screen adjustment using the LCD BRIGHT +/ – buttons The recorded picture will not be affected. Recording in a low position You can record in a low position to get an ...
-
Sony DSR250P - page 24
24 W T T W T W After recording ( 1 ) Close the LCD panel. ( 2 ) Eject the cassette. ( 3 ) Set the POWER switch to OFF. ( 4 ) Remove the battery pack. Using the zoom feature To zoom with the zoom lever Press the power zoom lever a little for a slower zoom. Press it deeper for a faster zoom. Using the zoom function sparingly results in better-looking ...
-
Sony DSR250P - page 25
Recording – Basics 25 Recording a picture To zoom with the zoom ring Using the zoom ring, you can control the zoom by your desired speed and you can make fine adjustments. During recording, turn the zoom ring to the desired speed. Note If you turn the zoom ring quickly, the zoom may not respond to the zoom ring adjustment. Rotate the zoom ring wi ...
-
Sony DSR250P - page 26
26 Recording a picture Indicators displayed during recording The indicators are not recorded on the tapes. [ a ] Remaining battery capacity indicator This appears after you turn on the power and wait for a while. When u REMAIN is set to LI-ION in the menu settings, “ Li ” is indicated, and when it is set to NI-CD, “ Ni ” is indicated. [ b ] ...
-
Sony DSR250P - page 27
Recording – Basics 27 Recording a picture On remaining battery capacity indicator The camcorder cannot detect the type of the battery pack automatically. According to your battery pack, set up the u REMAIN item properly (p. 10). A wrong setup does not indicate the correct battery capacity. Shooting backlit subjects (BACK LIGHT) When you shoot a s ...
-
Sony DSR250P - page 28
28 Recording a picture Spot light This function prevents people ’ s faces, for example, from appearing excessively white when shooting subjects lit by strong light, such as in the theater. Press SPOT LIGHT in standby, recording, or memory mode. The indicator appears on the LCD screen or in the viewfinder. To cancel, press SPOT LIGHT again. If you ...
-
Sony DSR250P - page 29
Recording – Basics 29 END SEARCH EDITSEARCH Checking the r ecording – END SEARCH / EDITSEARCH / Rec Review You can use these buttons to check the last recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth. Searching the end point of the recording — END SEARCH You can easily go ...
-
Sony DSR250P - page 30
30 — Playback – Basics — Playing back a tape You can monitor the playback picture on the LCD screen or in the viewfinder. You can also control playback using the Remote Commander supplied with your camcorder. ( 1 ) Install the power source. ( 2 ) Set the POWER switch to ON and insert the recorded tape. ( 3 ) Set the MEMORY/CAMERA/VTR selector ...
-
Sony DSR250P - page 31
31 Playback – Basics Playing back a tape When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. To select the audio output channel via the speaker or PHONES jack Select the channels using the AUDIO MONITOR selector. CH-1: Channel 1 audio MIX: Mixed audio (channels 1 ...
-
Sony DSR250P - page 32
32 Playing back a tape Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code) . Press DATA CODE on the camcorder or on the Remote Commander supplied with your camcorder in playback mode. The display changes as follows: date/t ...
-
Sony DSR250P - page 33
33 Playback – Basics Playing back a tape If the aperture adjustment is set to minimum “ CLOSE ” is displayed at the location of the aperture value. Various playback modes To operate video control buttons, set the MEMORY/CAMERA/VTR selector to VTR. To view a still picture (playback pause) Press X during playback. To resume normal playback, pre ...
-
Sony DSR250P - page 34
34 When you play back a tape in reverse Horizontal noise may appear at the center, or the top and bottom of the screen. This is not a malfunction. Note on DV-formatted tapes You can play back DV-formatted tapes on this camcorder if the tape is recorded in SP mode. “ DV SP ” appears on the LCD screen or in the viewfinder during playback. You can ...
-
Sony DSR250P - page 35
35 Playback – Basics S VIDEO VIDEO AUDIO IN S VIDEO VIDEO IN/OUT AUDIO IN/OUT CH-1/CH-2 MONITOR VIDEO OUT V iewing the recor ding on a monitor Connect your camcorder to your monitor or VCR with the A/V connecting cable to watch the playback picture on the monitor screen. You can operate the video control buttons in the same way as when you monito ...
-
Sony DSR250P - page 36
36 — Advanced Recording Operations — Shooting with manual adjustment Under normal conditions, this unit automatically makes various adjustments as it shoots. However, you can adjust the following functions manually to suit your preference. Functions you can adjust by setting the AUTO MODE switch to OFF Iris, gain, shutter speed, and white balan ...
-
Sony DSR250P - page 37
37 Advanced Recording Operations Shooting with manual adjustment Adjusting the iris Adjust the iris manually depending on the depth of field. ( 1 ) Set the AUTO MODE switch to OFF while the camcorder is in standby, recording, or memory mode. ( 2 ) Set the IRIS switch to MAN. The iris indicator appears on the LCD screen or in the viewfinder. ( 3 ) T ...
-
Sony DSR250P - page 38
38 2 0dB 1 3 AUTO MODE ON OFF AGC ON OFF GAIN H M L Adjusting the gain ( 1 ) Set the AUTO MODE switch to OFF while the camcorder is in standby, recording, or memory mode. ( 2 ) Set the AGC switch to OFF. The gain indicator appears on the LCD screen or in the viewfinder. ( 3 ) Switch the GAIN selector to select the desired gain value. The gain value ...
-
Sony DSR250P - page 39
39 Advanced Recording Operations Shooting with manual adjustment Setting the gain values for the positions of the GAIN selector ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu in standby, recording, or memory mode. ( 2 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 3 ) Turn the SEL ...
-
Sony DSR250P - page 40
40 Adjusting the shutter speed ( 1 ) Set the AUTO MODE switch to OFF while the camcorder is in standby, recording, or memory mode. ( 2 ) Set the SHUTTER switch to ON. The shutter speed set by the SHTR SPEED item in the menu settings will be indicated on the LCD screen or in the viewfinder. To return to automatic shutter speed mode Set the SHUTTER s ...
-
Sony DSR250P - page 41
41 Advanced Recording Operations Adjusting the shutter speed value ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu in standby, recording, or memory mode. ( 2 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 3 ) Turn the SEL/PUSH EXEC dial to select SHTR SPEED, then press the dial. ( ...
-
Sony DSR250P - page 42
42 Shooting with the zebra pattern You can set the camcorder to display a zebra pattern (diagonal stripes) in the portion of the picture on the LCD screen or in the viewfinder with a subject whose brightness exceeds a certain level. The portion of the picture where zebra pattern appears is an area of high brightness and overexposure (when the ZEBRA ...
-
Sony DSR250P - page 43
43 Advanced Recording Operations Releasing the SteadyShot function When the SteadyShot function is working, the camcorder compensates for camera- shake. You can release the SteadyShot function when you do not need to use it. The indicator appears on the LCD screen or in the viewfinder. Do not use the SteadyShot function when shooting a stationary o ...
-
Sony DSR250P - page 44
44 Adjusting the AE shift You can adjust the AE shift in accordance with shooting conditions and a subject. ( 1 ) Push the AE SHIFT switch in the direction of the arrow and release it in standby, recording, or memory mode. The AE shift indicator appears on the LCD screen or in the viewfinder. ( 2 ) Turn the SEL/PUSH EXEC dial to adjust the brightne ...
-
Sony DSR250P - page 45
45 Advanced Recording Operations Focusing manually You can gain better results by manually adjusting the focus in the following cases: • The autofocus mode is not effective when shooting – subjects through glass coated with water droplets – horizontal stripes – subjects with little contrast with backgrounds such as walls and sky • When yo ...
-
Sony DSR250P - page 46
46 To obtain the correct focus First, focus on a subject manually with the zoom set toward the “ T ” (telephoto) side, then adjust the zoom by pressing the “ W ” side of the lever gradually. When you shoot close to the subject Focus at the end of the “ W ” (wide-angle) position. 9 changes as follows: when recording a distant subject. wh ...
-
Sony DSR250P - page 47
47 Advanced Recording Operations Adjusting the white balance White balance adjustment makes white subjects look white and allows more natural colour balance for camera recording. Normally, white balance is automatically adjusted. You can obtain better results by adjusting the white balance manually when lighting conditions change quickly or when re ...
-
Sony DSR250P - page 48
48 To recall a white balance value from memory Before beginning shooting, set the WHITE BAL switch to the A or B position. This automatically sets the camcorder to the white balance adjustment saved in the corresponding memory. Shooting when lighting conditions have changed • When lighting conditions have changed, readjust the white balance while ...
-
Sony DSR250P - page 49
49 Advanced Recording Operations Shooting conditions • Recording a sunset/sunrise, just after sunset, just before sunrise, neon signs, or fireworks • Under a colour matching fluorescent lamp • Lighting condition changes quickly • Too bright a place such as a photography studio • Under sodium lamps or mercury lamps ( 1 ) Set the AUTO MODE ...
-
Sony DSR250P - page 50
50 Pr esetting the adjustment for picture quality – Custom pr eset You can preset the camcorder to record the picture with the desired picture quality. When you preset, we recommend that you check the picture quality by displaying the picture onto the monitor screen, which is connected to the camcorder. ( 1 ) Turn the CUSTOM PRESET/MENU switch in ...
-
Sony DSR250P - page 51
51 Advanced Recording Operations Presetting the adjustment for picture quality – Custom preset Items to be adjusted Item COLOUR LVL SHARPNESS WB SHIFT AGC LIMIT RESET To cancel using the custom preset Select OFF in step 4, then press the SEL/PUSH EXEC dial. To return to the standard setting Select OK from the RESET item in step 5, then press the ...
-
Sony DSR250P - page 52
52 Using the guide frame You can easily make the picture be on a horizontal or vertical line using the guide frame. The guide frame is not recorded. ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu in standby, recording, or memory mode. ( 2 ) Turn the SEL/PUSH EXEC dial to select , then press the dia ...
-
Sony DSR250P - page 53
53 Advanced Recording Operations STBY I NDEX STBY REC I NDEX MARK REC I NDEX MARK [a] [b] INDEX MARK Marking an Index If you mark an index at the scene you want to search for, you can easily search for the scene later (p. 77). In recording mode [ a ]: Press INDEX MARK. The “ INDEX MARK ” indicator appears on the LCD screen or in the viewfinder ...
-
Sony DSR250P - page 54
54 Adjusting the r ecording level manually – Sound r ecording level You can adjust the recording sound level. We recommend that you check the recording level before recording. You can adjust the channel 1 and channel 2 separately. ( 1 ) Select the audio input using the AUDIO INPUT (CH-1/CH-2) switches. To select the audio input for channel 1, use ...
-
Sony DSR250P - page 55
55 Advanced Recording Operations Adjusting the recording level manually – Sound recording level Notes on the recording level of the channel 1 • You can adjust the level from both the MIC IN +48V and AUDIO IN CH1 connectors. • You can also adjust the level using the AUDIO LEVEL knob located on the front, however, when the AUDIO LEVEL knob loca ...
-
Sony DSR250P - page 56
56 Connecting an optional external micr ophone You can also use an external 48-V microphone by connecting it to the MIC IN +48V connector. (The optional CAC-12 Microphone Holder is required.) Installing the optional CAC-12 Microphone Holder Remove the two retaining screws (M3 × 12) for the optional microphone holder, then use these screws to attac ...
-
Sony DSR250P - page 57
57 Advanced Recording Operations To fit optional microphones (operable with a 48 V supply) other than the ECM-670 Use the same fitting procedure as for the ECM-670, but note the following differences with respect to the microphone adaptor. ECM-672: no microphone adaptor required. Slender microphones (19 mm (3/4 inch) diameter): use the microphone a ...
-
Sony DSR250P - page 58
58 LINE MIC +48V ON LINE MIC +48V ON AUDIO INPUT FRONT REAR FRONT REAR Using an exter nal audio system or microphone Connect an audio mixer or other external audio system component to the AUDIO IN CH1/CH2 connectors. ( 1 ) Connect an audio mixer or other external audio system component to the AUDIO IN CH1/CH2 connector. ( 2 ) Set the AUDIO INPUT sw ...
-
Sony DSR250P - page 59
59 Advanced Recording Operations Backing up recor dings to another tape You can easily make backup copies of recordings to the VCR connected to your camcorder with the DV connecting cable (i.LINK cable). Setting EXT RECCTL in the menu settings to ON synchronizes the recording start/pause operation of the external VCR with the START/STOP button on y ...
-
Sony DSR250P - page 60
60 Using a video light You can use the Anton Bauer Ultralight 2 or equivalent. Use a video light powered by 12 V with maximum power consumption of 30 W. • If you connect the video light to the LIGHT connector on the camcorder and set the LIGHT switch to AUTO, you can turn the light on and off automatically as you start and stop the recording. • ...
-
Sony DSR250P - page 61
61 Advanced Recording Operations Superimposing the date and time on a picture You can superimpose the date/time indication directly on the picture, besides the date/ time display as data code. ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu in standby mode. ( 2 ) Turn the SEL/PUSH EXEC dial to selec ...
-
Sony DSR250P - page 62
62 Recor ding a still image on a tape – T ape Photo r ecording You can record still images on tapes with all the pixels in the progressive mode. See page 64 for details. This mode is useful when you print images using a video printer (not supplied). Besides the operation described here, your camcorder can record still images on a “ Memory Stick ...
-
Sony DSR250P - page 63
63 Advanced Recording Operations Recording a still image on a tape – Tape Photo recording To do tape photo recording using the Remote Commander Press PHOTO on the Remote Commander. Your camcorder immediately records an image on the LCD screen or in the viewfinder. When you do tape photo recording during normal CAMERA recording You cannot check an ...
-
Sony DSR250P - page 64
64 Shooting with all the pixels – PROG. SCAN To import moving images to your PC to view still images, we recommend you record in progressive mode. To use progressive mode, follow the procedure below. Still images produced this way are more stable than those recorded on a mini DV in normal mode, and thus are more suitable for analysing high-speed ...
-
Sony DSR250P - page 65
65 Advanced Recording Operations When shooting under fluorescent light When shooting in progressive mode under fluorescent light or light bulbs, a rare phenomenon may happen in which the screen lights up brightly (Flicker phenomenon). This is not a malfunction. If you want to stop this phenomenon, set PROG. SCAN to OFF in the menu settings. On digi ...
-
Sony DSR250P - page 66
66 Using the wide mode You can record a 16:9 wide picture to watch on a 16:9 wide-screen monitor (16:9WIDE). Black bands appear on the LCD screen or in the viewfinder during recording in 16:9WIDE mode [ a ] . The picture during playback on a normal monitor [ b ] or on a wide- screen monitor [ c ] is compressed in the widthwise direction. If you set ...
-
Sony DSR250P - page 67
67 Advanced Recording Operations Using the fader function You can fade the picture in or out to give your recording a professional appearance. MONOTONE When fading in, the picture gradually changes from black-and-white to colour. When fading out the picture gradually changes from colour to black-and-white. [a] REC STBY REC STBY [b] FADER OVERLAP* W ...
-
Sony DSR250P - page 68
68 Using the fader function ( 1 ) When fading in [ a ] In standby mode, press FADER until the desired fader indicator flashes. When fading out [ b ] In recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows: FADER t MONOTONE t OVERLAP t WIPE t DOT t no indicator The last selected fader mode is indica ...
-
Sony DSR250P - page 69
69 Advanced Recording Operations Using special effects – Digital ef fect You can add special effects to recorded pictures using the various digital functions. The sound is recorded normally. STILL You can record a still image so that it is superimposed on a moving picture. FLASH (FLASH MOTION) You can record still images successively at constant ...
-
Sony DSR250P - page 70
70 Using special effects – Digital effect ( 1 ) In standby or recording mode, press DIGITAL EFFECT. The digital effect indicator appears. ( 2 ) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode. The digital effect indicator changes as follows: STILL y FLASH y LUMI. y TRAIL y OLD MOVIE ( 3 ) Press the SEL/PUSH EXEC dial. The in ...
-
Sony DSR250P - page 71
71 Advanced Recording Operations Superimposing a still image in a “ Memory Stick ” on a moving picture – MEMOR Y MIX You can superimpose a still image you have recorded on a “ Memory Stick ” on the top of the moving picture you are recording. M. CHROM (Memory chromakey) You can swap a blue area of a still image such as an illustration or ...
-
Sony DSR250P - page 72
72 Before operation Insert a recorded “ Memory Stick ” and a tape to be recorded into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to CAMERA. ( 2 ) Press MEMORY MIX in standby mode. The last recorded or last composed image appears on the lower part of the screen as a thumbnail image. ( 3 ) Press MEMORY+/ – or +/ – on the Remote ...
-
Sony DSR250P - page 73
73 Advanced Recording Operations Superimposing a still image in a “ Memory Stick ” on a moving picture – MEMORY MIX Items to be adjusted M. CHROM The colour (blue) scheme of the area in the still picture which is to be swapped with a moving picture M. LUMI The colour (bright) scheme of the area in the still picture which is to be swapped with ...
-
Sony DSR250P - page 74
74 Interval r ecording You can make a time-lapse recording by setting the camcorder to automatically record and standby sequentially. You can achieve an excellent recording for flowering, emergence, etc., with this function. [ a ] Recording time [ b ] Waiting time ( 1 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to disp ...
-
Sony DSR250P - page 75
75 Advanced Recording Operations Interval recording ( 6 ) Turn the SEL/PUSH EXEC dial to select ON, then press the dial. ( 7 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to erase the menu display. The interval recording indicator flashes. ( 8 ) Press START/STOP to start interval recording. The interval recording indicat ...
-
Sony DSR250P - page 76
76 Frame by frame r ecording – Cut r ecording You can make a recording with a stop-motion animated effect using cut recording. To create this effect, alternately move the subject a little and make a cut recording. We recommend that you use a tripod, and operate the camcorder using the Remote Commander after step 6. ( 1 ) Push the CUSTOM PRESET/ME ...
-
Sony DSR250P - page 77
77 Advanced Playback Operations — Advanced Playback Operations — Sear ching for a recor ding by index – Index search You can automatically search for the point where an index is marked and start playback from that point (Index search) . Use a tape with cassette memory for convenience. Use the Remote Commander for this operation. Use this func ...
-
Sony DSR250P - page 78
78 Searching for a recording by index – Index search If a tape has a blank portion between recorded portions The index search function may not work correctly. If you mark an index onto an external input signal “ LINE ” appears in the CH column. The index of the recording start point when recorded from external audio equipment The index mark i ...
-
Sony DSR250P - page 79
79 Advanced Playback Operations Sear ching the boundaries of recor ded tape by title – Title sear ch If you use a tape with cassette memory, you can search for the boundaries of recorded tape by title (Title search) (p. 158). Use the Remote Commander for this operation. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR. ( 2 ) Set CM SEARCH in to ON ...
-
Sony DSR250P - page 80
80 Sear ching a recor ding by date – Date sear ch You can automatically search for the point where the recording date changes and start playback from that point (Date search) . Use a tape with cassette memory for convenience. Use the Remote Commander for this operation. Use this function to check where recording dates change or to edit the tape a ...
-
Sony DSR250P - page 81
81 Advanced Playback Operations Searching a recording by date – Date search If a tape has a blank portion between recorded portions The date search function may not work correctly. Searching for the date without using cassette memory ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR. ( 2 ) Set CM SEARCH in to OFF in the menu settings (p. 120). If u ...
-
Sony DSR250P - page 82
82 Sear ching for a photo – Photo search/ Photo scan You can search for a still picture you have recorded on a tape (photo search) . You can also search for still pictures one after another and display each picture for five seconds automatically regardless of cassette memory (photo scan) . Use the Remote Commander for these operations. Use this f ...
-
Sony DSR250P - page 83
83 Advanced Playback Operations Searching for a photo – Photo search/Photo scan Searching for a photo without using cassette memory ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR. ( 2 ) Set CM SEARCH in to OFF in the menu settings (p. 120). ( 3 ) Press SEARCH MODE on the Remote Commander repeatedly, until the photo search indicator appears. The ...
-
Sony DSR250P - page 84
84 Playing back a tape with digital ef fects During playback, you can process a scene using the digital effect functions: STILL, FLASH, LUMI. and TRAIL. ( 1 ) In playback or playback pause mode, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL) flashes. ( 2 ) Press the SEL ...
-
Sony DSR250P - page 85
Editing 85 — Editing — Dubbing a tape Using the A/V connecting cable Connect your camcorder to the VCR using the A/V connecting cable. Recording quality by analog input, however, is not satisfying for professional use. Before a dubbing Set DISPLAY to LCD in the menu settings. (Default setting is LCD.) ( 1 ) Insert a blank tape (or a tape you wa ...
-
Sony DSR250P - page 86
86 Dubbing a tape Connect using an S video cable (not supplied) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video cable (not supplied) to the S video jacks of both your camcorder and the VCR. This connection produces higher quality DVCAM/DV format ...
-
Sony DSR250P - page 87
Editing 87 Dubbing a tape You can connect only one VCR using the DV connecting cable (i.LINK cable) Pictures processed by the digital effect function Pictures processed by the digital effect function are not output through the DV IN/ OUT connector. If you record a playback pause picture with the DV IN/OUT connector The recorded picture becomes roug ...
-
Sony DSR250P - page 88
88 Dubbing only desir ed scenes – Digital pr ogram editing You can duplicate selected scenes (programs) for editing onto a tape without operating the VCR. Scenes can be selected by frame. To use this function, a DV connecting cable (i.LINK cable) (not supplied) will be required. [ a ] Undesired frame [ b ] Moves the scene To do the digital progra ...
-
Sony DSR250P - page 89
Editing 89 Dubbing only desired scenes – Digital program editing Preparation 2: Adjusting the synchronization of the VCR You can adjust the synchronization of your camcorder and the VCR. Remove the cassette from the camcorder beforehand. We recommend that you prepare a pen and paper for notes. ( 1 ) Insert a recordable tape into the VCR. ( 2 ) Se ...
-
Sony DSR250P - page 90
90 Dubbing only desired scenes – Digital program editing ( 10 ) Turn the SEL/PUSH EXEC dial to select “ CUT-IN, ” then press the dial. ( 11 ) Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT- IN, then press the dial. The calculated start position for recording is set. ( 12 ) Turn the SEL/PUSH EXEC dial to select “ CU ...
-
Sony DSR250P - page 91
Editing 91 Dubbing only desired scenes – Digital program editing Operation 1: Making Programs ( 1 ) Insert the tape for playback into your camcorder, and insert a tape for recording into the VCR. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Turn the SEL/PUSH EXEC dial to select , then pr ...
-
Sony DSR250P - page 92
92 Dubbing only desired scenes – Digital program editing ( 6 ) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander. The CUT-IN point of the first program is set, and the top part of the program mark changes to light blue. ( 7 ) Search for the end of the first scene you want to insert using the video control buttons, then pause playback ...
-
Sony DSR250P - page 93
Editing 93 Dubbing only desired scenes – Digital program editing Erasing all programs ( 1 ) Select VIDEO EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to select ERASE ALL, then press the dial. ( 2 ) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. All the program marks flash, then the settings are cancelled. To cancel ...
-
Sony DSR250P - page 94
94 Using with an analog video unit and a PC – Signal convert function You can convert the analog input signal to the digital signal and output it from the DV IN/OUT connector on this camcorder. You can capture images and sound from an analog video unit connecting a PC which has the i.LINK connector to your camcorder. ( 1 ) Set the MEMORY/CAMERA/V ...
-
Sony DSR250P - page 95
Editing 95 Notes • When you edit the captured image and sound from the analog video unit by a PC, you need to install an appropriate software which can exchange video signals between the camcorder and a PC. • Depending on the condition of the analog video signals, the PC may not be able to output the images correctly when you convert analog vid ...
-
Sony DSR250P - page 96
96 Recor ding video or TV programs Using the A/V connecting cable You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder. ( 1 ) Insert a blank tape (or a tape you want to record over) into your camcorder. If you want to record a tape from the VCR, insert a recorded tape into ...
-
Sony DSR250P - page 97
Editing 97 Recording video or TV programs If your VCR is a monaural type Connect with a VCR using the audio cable (monaural y stereo) (not supplied). Connect using an S video cable (not supplied) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect an S video c ...
-
Sony DSR250P - page 98
98 Recording video or TV programs Using a DV connecting cable (i.LINK cable) Simply connect the DV connecting cable (i.LINK cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DVCAM/DV products. With a digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. ( 1 ) Insert a blank tape (o ...
-
Sony DSR250P - page 99
Editing 99 Recording video or TV programs You can connect only one VCR using the DV connecting cable (i.LINK cable) When you dub a picture in digital form The colour of the display may be uneven. However this does not affect the dubbed picture. If you record a still picture in playback pause mode via the DV IN/OUT connector The recorded picture bec ...
-
Sony DSR250P - page 100
100 Audio dubbing You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect audio equipment, you can add sound to your recorded tape by specifying the starting and ending points. The original sound will not be erased. You can also use the Remote Commander for this operation. T ...
-
Sony DSR250P - page 101
Editing 101 Notes • New sound cannot be recorded on a tape already recorded in Fs48K mode (p. 125). • You cannot dub any audio sound on a tape recorded in the DV format (SP mode), even if you recorded it in Fs32K (12-bit) mode. • You cannot add audio with the DV IN/OUT connector. If you make all the connections The audio input to be recorded ...
-
Sony DSR250P - page 102
102 Dubbing with the AUDIO IN CH1/CH2 connectors For details on setup of the AUDIO IN CH1/CH2 connectors, see “ Using an external audio system or microphone ” on page 58. You can check the picture on a monitor by connecting the monitor to the VIDEO IN/ OUT jack or VIDEO OUT connector. You can monitor the additional sound by the speaker or headp ...
-
Sony DSR250P - page 103
Editing 103 Audio dubbing Adding an audio sound on a recorded tape ( 1 ) Insert the recorded tape into your camcorder. ( 2 ) Set the MEMORY/CAMERA/VTR selector to VTR on your camcorder. ( 3 ) Locate the recording start point by pressing N . Then press X at the point where you want to start recording to set your camcorder to the playback pause mode. ...
-
Sony DSR250P - page 104
104 Audio dubbing VTR SET AUD I O M I X A/V DV OUT NTSC PB RETURN [ MENU ] : END CH1 2 CH3 4 Monitoring the new recorded sound To play back the sound First, select channels using the AUDIO MONITOR selector, then adjust the balance between the channels 1/2 (CH1/2) and the channels 3/4 (CH3/4) by selecting AUDIO MIX in the menu settings (p. 120). The ...
-
Sony DSR250P - page 105
Editing 105 Setting time values The camcorder uses two types of time values: time code values and user bits. The time value is displayed on the LCD screen, in the viewfinder, or on the display window. The user bits are convenient when using multiple cameras at the same event. When you record the picture, time code data will be recorded automaticall ...
-
Sony DSR250P - page 106
106 ( 10 ) Turn the SEL/PUSH EXEC dial to select SET, then press the dial. ( 11 ) Turn the SEL/PUSH EXEC dial to select TC RUN, then press the dial. ( 12 ) Turn the SEL/PUSH EXEC dial to select the desired running mode, then press the dial. REC RUN: Time code value advances only while recording. When making the time code continuous at back space ed ...
-
Sony DSR250P - page 107
Editing 107 Making the time code continuous at back space editing Set TC MAKE to REGEN in the menu settings to make the time code continuous when the recording has been interrupted or when the cassette tape has been removed from the camcorder between shootings. When the camcorder is in recording pause mode, the recorded time code is read from the t ...
-
Sony DSR250P - page 108
108 Setting the user bits value You can set the user bits as eight-digit hexadecimal values (base 16) to have the date, time, scene number, and other information inserted into the time code. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or CAMERA. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( ...
-
Sony DSR250P - page 109
Editing 109 Switching the time value Switch the DISPLAY SELECT switch as follows: TC: Displays the time code. This is indicated as “ 00:00:00:00 ” . U-BIT: Displays user bits. This is indicated as “ 00 00 00 00 ” . Note The time code and user bits cannot be displayed properly if the tape does not have time code and/or user bits recordings o ...
-
Sony DSR250P - page 110
110 Superimposing a title If you use a tape with cassette memory, you can superimpose the title while recording or after recording. When you play back the tape, the title is displayed for five seconds from the point where you superimposed it. You can select one of eight preset titles and two custom titles (p. 114). ( 1 ) Press TITLE to display the ...
-
Sony DSR250P - page 111
Editing 111 Superimposing a title If you set the REC/SAVE switch of the cassette to SAVE You cannot superimpose or erase the title. Slide the REC/SAVE switch to REC. To use a custom title If you want to use the custom title, select in step 2. If the tape has a blank portion You cannot superimpose a title on that portion. If the tape has a blank por ...
-
Sony DSR250P - page 112
112 Superimposing a title Title setting • The title colour changes as follows: WHITE y YELLOW y VIOLET y RED y CYAN y GREEN y BLUE • The title size changes as follows: SMALL y LARGE You cannot input more than 12 characters in LARGE size. • If you select the title size “ SMALL, ” you have nine choices for the title position. If you select ...
-
Sony DSR250P - page 113
Editing 113 Superimposing a title Erasing a title ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or CAMERA. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 4 ) Turn the SEL/PUSH EXEC dial to select TITLEERASE, then press the dial ...
-
Sony DSR250P - page 114
114 Making your own titles You can make up to two titles and store them in cassette memory. Each title can have up to 20 characters. ( 1 ) Press TITLE in the standby, playback, or playback pause mode. ( 2 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 3 ) Turn the SEL/PUSH EXEC dial to select CUSTOM1 SET or CUSTOM2 SET, then press ...
-
Sony DSR250P - page 115
Editing 115 Making your own titles To change a title you have stored In step 3, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [ C ], then press the dial to delete the title. The last character is erased. Enter a new title as desired. To erase ...
-
Sony DSR250P - page 116
116 Labelling a cassette If you use a tape with cassette memory, you can label a cassette. The label can consist of up to 10 characters and is stored in cassette memory. When you insert the labelled cassette and set the MEMORY/CAMERA/VTR selector to VTR, CAMERA, or MEMORY, the label is displayed for about five seconds. ( 1 ) Insert the cassette you ...
-
Sony DSR250P - page 117
Editing 117 Labelling a cassette To change the label you have made Insert the cassette to change the label, and operate in the same way as you do to make a new label. If you set the REC/SAVE switch of the cassette to SAVE You cannot label the tape. Slide the REC/SAVE switch to REC. If you have superimposed titles in the cassette When the label is d ...
-
Sony DSR250P - page 118
118 Erasing the cassette memory data You can erase data stored in cassette memory, each item ’ s data can be erased separately. You can also erase all items ’ data once. Erasing each item ’ s data separately ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or CAMERA. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it ...
-
Sony DSR250P - page 119
Editing 119 Erasing the cassette memory data To cancel erasing Select RETURN in step 6 or 7, then press the SEL/PUSH EXEC dial. Erasing all the data in cassette memory ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or CAMERA. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Turn the SEL/PUSH ...
-
Sony DSR250P - page 120
120 — Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with the SEL/ PUSH EXEC dial. The default settings can be partially changed. First, select the icon, then the menu item and then the mode. ( 1 ) In the standby, VTR, or MEMORY mode, push the CUSTOM PRESET/MENU sw ...
-
Sony DSR250P - page 121
121 Customizing Your Camcorder Changing the menu settings To make the menu display disappear Push the CUSTOM PRESET/MENU switch in the MENU direction and release it. Menu items are displayed as the following icons: TC/UB SET MANUAL SET CAMERA SET VTR SET LCD SET MEMORY SET CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item z ...
-
Sony DSR250P - page 122
122 Icon/item SHTR SPEED GAIN LEVEL AUTO SHTR PROG. SCAN D ZOOM 16:9WIDE STEADYSHOT FRAME REC INT. REC Mode — — z ON OFF z OFF ON z OFF 24 × 48 × z OFF ON z ON OFF z OFF ON ON z OFF SET Meaning Adjusts the shutter speed. To set gain values of H (High), M (Middle), and L (Low) positions. To automatically adjust the electronic shutter speed. To ...
-
Sony DSR250P - page 123
123 Customizing Your Camcorder Changing the menu settings Icon/item AUDIO MIX A/V t DV OUT NTSC PB LCD COLOUR GUIDEFRAME CONTINUOUS QUALITY Mode — z OFF ON z ON PAL TV NTSC 4.43 — z OFF ON z OFF ON MULTI SCRN z SUPER FINE FINE STANDARD Meaning To adjust the balance between the channels 1/2 (CH1/2) and channels 3/4 (CH3/4) (p. 104). To output an ...
-
Sony DSR250P - page 124
124 Changing the menu settings Icon/item PRINT MARK PROTECT SLIDE SHOW DELETE ALL FORMAT PHOTO SAVE CM SEARCH TAPE TITLE TITLE DSPL TITLEERASE Mode z OFF ON z OFF ON — — z RETURN OK — z ON OFF — z ON OFF — Meaning To erase print marks on still images. To write a print mark on the recorded still images you want to print out later. To relea ...
-
Sony DSR250P - page 125
125 Customizing Your Camcorder Changing the menu settings Icon/item ITEM ERASE ERASE ALL REC MODE AUDIO MODE q REMAIN DATA CODE A REF LVL Mode — — z DVCAM DV SP z FS32K FS48K z AUTO ON z DATE/CAM DATE –12dB z –18dB Meaning To erase each item’s data in cassette memory (p. 118). To erase all the data in cassette memory (p. 119). To record i ...
-
Sony DSR250P - page 126
126 Changing the menu settings Icon/item CLOCK SET LTR SIZE u REMAIN LOGO INS WORLD TIME BEEP COMMANDER Mode — z NORMAL 2 × z LI-ION NI-CD — — MELODY z NORMAL OFF z ON OFF Meaning To reset the date or time (p. 128). To display selected menu items in normal size. To display selected menu items at twice the normal size. Selects when attaching ...
-
Sony DSR250P - page 127
127 Customizing Your Camcorder Changing the menu settings Icon/item DISPLAY EXT RECCTL DATE REC COLOUR BAR VIDEO EDIT EDIT SET HRS METER Mode z LCD V-OUT/LCD z OFF ON z OFF ON z OFF ON — — OPERATION DRUM RUN TAPE RUN THREADING Meaning To show the display on the LCD screen and viewfinder screen. To show the display on a TV screen, LCD screen and ...
-
Sony DSR250P - page 128
128 Resetting the date and time The date and time are set at the factory. Set the time according to the local time in your country. If you remove power sources from your camcorder for about four months, the date and time settings may be released because the vanadium-lithium battery installed in your camcorder will have been discharged (p. 174). Fir ...
-
Sony DSR250P - page 129
129 “ Memory Stick ” Operations — “ Memory Stick ” Operations — Using a “ Memory Stick ” – intr oduction You can record and play back still images on the “ Memory Stick ” supplied with your camcorder. You can easily play back, record or delete still images. You can exchange image data with other equipment such as a personal co ...
-
Sony DSR250P - page 130
130 Using a “ Memory Stick ” – introduction Notes on image data compatibility • Image data files recorded on a “ Memory Stick ” by your camcorder conform to the Design Rules for Camera File Systems universal standard (DCF98 standard) established by the JEIDA (Japan Electronic Industry Development Association). You cannot play back on yo ...
-
Sony DSR250P - page 131
131 “ Memory Stick ” Operations Using a “ Memory Stick ” – introduction Inserting a “ Memory Stick ” Open the “ Memory Stick ” cover, and insert the “ Memory Stick ” with the Sony logo pointing toward the LCD panel and the b mark pointing inward. To eject a “ Memory Stick ” Open the “ Memory Stick ” cover, and push the ...
-
Sony DSR250P - page 132
132 Using a “ Memory Stick ” – introduction Selecting the image quality mode You can select the image quality mode in still picture recording. The default setting is SUPER FINE. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Tu ...
-
Sony DSR250P - page 133
133 “ Memory Stick ” Operations Using a “ Memory Stick ” – introduction Note In some cases, changing the image quality mode may not affect the image quality, depending on the types of images you are shooting. Differences in image quality mode Recorded images are compressed in JPEG format before being stored in memory. The memory capacity ...
-
Sony DSR250P - page 134
134 Recor ding still images on a “ Memory Stick ” – Memory Photo recor ding You can record still images on a “ Memory Stick. ” Before operation Insert a “ Memory Stick ” into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to MEMORY. ( 2 ) Keep pressing PHOTO lightly until the desired still picture appears. The green z mark s ...
-
Sony DSR250P - page 135
135 “ Memory Stick ” Operations Recording still images on a “ Memory Stick ” – Memory Photo recording While you are recording a still image You can neither turn off the power nor press PHOTO. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. Recording ...
-
Sony DSR250P - page 136
136 Recording still images on a “ Memory Stick ” – Memory Photo recording ( 1 ) Set the MEMORY/CAMERA/VTR selector to MEMORY. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Turn the SEL/PUSH EXEC dial to select , then press the dial. ( 4 ) Turn the SEL/PUSH EXEC dial to select CONTINUO ...
-
Sony DSR250P - page 137
137 “ Memory Stick ” Operations Recor ding an image from a tape as a still image Your camcorder can read moving picture data recorded on a tape and record it as a still image on a “ Memory Stick. ” Your camcorder can also take in moving picture data through the input connector and record it as a still image on a “ Memory Stick. ” Before ...
-
Sony DSR250P - page 138
138 Recording an image from a tape as a still image Titles that are already recorded on tapes You cannot record the titles on a “ Memory Stick. ” When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. Recording a still image from other equipment ( 1 ) Set the ME ...
-
Sony DSR250P - page 139
139 “ Memory Stick ” Operations LANC S1 VIDEO DV 6 ) ) P ( Recording an image from a tape as a still image When recording the image through the DV IN/OUT connector : Signal flow DV connecting cable (i.LINK cable) (not supplied) DV IN/OUT DV IN/ OUT ...
-
Sony DSR250P - page 140
140 Copying still images fr om a tape – Photo save Using the search function, you can automatically take in still images from tapes and record them on a “ Memory Stick ” in sequence. Before operation • Insert a recorded tape into your camcorder and rewind the tape. • Insert a “ Memory Stick ” into your camcorder. ( 1 ) Set the MEMORY/ ...
-
Sony DSR250P - page 141
141 “ Memory Stick ” Operations Copying still images from a tape – Photo save To cancel copying Push the CUSTOM PRESET/MENU switch in the MENU direction and release it again. When the memory of the “ Memory Stick ” is full “ MEMORY FULL ” appears on the LCD screen or in the viewfinder, and the copying stops. Insert another “ Memory ...
-
Sony DSR250P - page 142
142 V iewing a still picture – Memory Photo playback You can play back still images recorded on a “Memory Stick.” You can also play back six images at a time by selecting the index screen. Before operation Insert a “Memory Stick” into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY. ( 2 ) Press MEMORY PLAY. The l ...
-
Sony DSR250P - page 143
143 “Memory Stick” Operations Viewing a still picture – Memory Photo playback Screen indicators during still image playback On data file name • When the hyphen is indicated between the directory and the file number, this data file name means that this file corresponds to the DCF98 standard. • When the underbar is indicated between the dir ...
-
Sony DSR250P - page 144
144 12 / 19 100 – 0019 789 10 11 12 [a] [b] Playing back six recorded images at a time (index screen) You can play back six recorded images at a time. This function is especially useful when searching for a particular image. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR or MEMORY. ( 2 ) Press MEMORY INDEX to display the index screen. A red B ma ...
-
Sony DSR250P - page 145
145 “ Memory Stick ” Operations Viewing a still picture – Memory Photo playback Files modified with personal computers These files may not be displayed on the index screen. Image files shot with other equipment may not be displayed on the index screen either. Note When displaying the index screen, a number appears above each image. This indic ...
-
Sony DSR250P - page 146
146 Copying an image r ecorded on a “ Memory Stick ” to tapes You can copy still images or titles recorded on a “ Memory Stick ” and record them to a tape. Before operation Insert a tape for recording and a “ Memory Stick ” for playback into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to VTR. ( 2 ) Using the video control b ...
-
Sony DSR250P - page 147
147 “ Memory Stick ” Operations Copying an image recorded on a “ Memory Stick ” to tapes Note on the index screen You cannot record the index screen. Image data modified with personal computers or shot with other equipment You may not be able to copy them with your camcorder. If you press DISPLAY in standby or recording mode You can see mem ...
-
Sony DSR250P - page 148
148 2 5 3 4 1 MEMORY SET CONT I NUOUS QUAL I TY PR I NT MARK PROTECT SL I DE SHOW DELETE ALL FORMAT [ MENU ] : END MEMORY SET CONT I NUOUS QUAL I TY PR I NT MARK PROTECT SL I DE SHOW DELETE ALL FORMAT RETURN [ MENU ] : END READY [ M PLAY ] : START [ MENU ] : END SL I DE SHOW 100-0019 10 / 15 PLA Y MEMORY VTR CAMERA CUSTOM PRESET MENU Playing back i ...
-
Sony DSR250P - page 149
149 “ Memory Stick ” Operations Preventing accidental erasur e – Image pr otection To prevent accidental erasure of important images, you can protect selected images. Before operation Insert a “ Memory Stick ” into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to MEMORY or VTR. ( 2 ) Play back the image you want to protect (p. ...
-
Sony DSR250P - page 150
150 Note Formatting erases all information on the “ Memory Stick, ” including the protected image data. Check the contents of the “ Memory Stick ” before formatting. If the write-protect tab on the “ Memory Stick ” is set to LOCK You cannot carry out image protection. When the auto logo insert function is activated You cannot use this f ...
-
Sony DSR250P - page 151
151 “ Memory Stick ” Operations Deleting images You can delete images stored in a “ Memory Stick. ” Deleting selected images Before operation Insert a “ Memory Stick ” into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to MEMORY or VTR. ( 2 ) Play back the image you want to delete (p. 142). ( 3 ) Press MEMORY DELETE. “ DELE ...
-
Sony DSR250P - page 152
152 Deleting images Deleting all the images You can delete all the unprotected images in a “ Memory Stick. ” Before operation Insert a “ Memory Stick ” into your camcorder. ( 1 ) Set the MEMORY/CAMERA/VTR selector to MEMORY. ( 2 ) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. ( 3 ) Turn the SEL ...
-
Sony DSR250P - page 153
153 “ Memory Stick ” Operations Deleting images To cancel deleting all the images in the “ Memory Stick ” Select RETURN in step 5, then press the SEL/PUSH EXEC dial. ...
-
Sony DSR250P - page 154
154 3,7 4 5 6 MEMORY SET CONT I NUOUS QUAL I TY PR I NT MARK PROTECT SL I DE SHOW DELETE ALL FORMAT [ MENU ] : END MEMORY SET CONT I NUOUS QUAL I TY PR I NT MARK PROTECT SL I DE SHOW DELETE ALL FORMAT RETURN [ MENU ] : END OFF MEMORY SET CONT I NUOUS QUAL I TY PR I NT MARK PROTECT SL I DE SHOW DELETE ALL FORMAT RETURN [ MENU ] : END ON OFF MEMORY S ...
-
Sony DSR250P - page 155
155 “ Memory Stick ” Operations If the write-protect tab on the “ Memory Stick ” is set to LOCK You cannot write print marks on still images. When the auto logo insert function is activated You cannot use this function. Refer to the extra operating instructions, “ Auto Logo Insert for Copyright Protection. ” Writing a print mark – Pri ...
-
Sony DSR250P - page 156
156 — Additional Information — Compatibility of DVCAM and DV formats DVCAM format is developed as a more reliable and higher end format than consumer DV format. Here explained are the differences, compatibility, and limitations on editing about DVCAM and DV formats. Differences between DVCAM and DV formats Item DVCAM DV Track pitch 15 µ m 10 ? ...
-
Sony DSR250P - page 157
Additional Information 157 Compatibility of DVCAM and DV formats Compatibility on editing using DV connectors When this digital camcorder is connected to other DVCAM or DV video equipment using DV connectors, the recording format of edited tapes is defined according to recorder ’ s format as described below. Source tape Player ’ s format Record ...
-
Sony DSR250P - page 158
158 Usable cassettes Selecting cassette types You can use the DVCAM cassette*, mini DVCAM cassette*, DV cassette*, and mini DV cassette* in this camcorder. You cannot use any other 8 mm, Hi8, Digital 8, VHS, S-VHS, VHSC, S-VHSC, Betamax or ED Betamax cassette. * There are two types of DVCAM/DV cassettes: with cassette memory and without cassette me ...
-
Sony DSR250P - page 159
Additional Information 159 Usable cassettes Copyright signal When you play back When you connect your camcorder to any other video camera recorder to dub a tape that has recorded copyright control signals for copyright protection, you may not record the tape that played back on your camcorder. When you record You cannot record software on your camc ...
-
Sony DSR250P - page 160
160 [a] [b] Do not affix a label around this border. [c] Notes on the DVCAM/DV cassette When affixing a label on the DVCAM/DV cassette Be sure to affix a label only on the locations as illustrated below [ a ] so as not to cause malfunction of your camcorder. After using the DVCAM/DV cassette Rewind the tape to the beginning, put the cassette in its ...
-
Sony DSR250P - page 161
Additional Information 161 About i.LINK Your camcorder is equipped with the DV input/output connector based on i.LINK (IEEE1394) standard. This section explains the specifications and features of i.LINK. What is i.LINK? i.LINK is a digital serial interface designed to integrate the devices equipped with i.LINK connector. By connecting i.LINK device ...
-
Sony DSR250P - page 162
162 T r oubleshooting If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If “ C: ss : ss ” appears on the LCD screen or in the viewfinder, the self-diagnosis display fun ...
-
Sony DSR250P - page 163
Additional Information 163 Troubleshooting Symptom Some tiny white spots appear on the LCD screen or in the viewfinder. The click of the shutter does not sound. The image is not bright even if you use the video light. Audio recording is not possible. In the playback mode Symptom The tape does not move when a video control button is pressed. The pla ...
-
Sony DSR250P - page 164
164 Troubleshooting Symptom The new sound now being added, or that has been added to the recorded tape is not heard. The title is not displayed. The sound is muted or images do not appear when monitoring images through a monitor. The recorded sound is distorted. In the recording and playback modes Symptom The power does not turn on. The camcorder d ...
-
Sony DSR250P - page 165
Additional Information 165 Troubleshooting Symptom The cassette cannot be removed from the holder. The % and Z indicators flash and no functions except for cassette ejection work. indicator does not appear when using a tape with cassette memory. Remaining tape indicator is not displayed. When operating using the “ Memory Stick ” Symptom Operati ...
-
Sony DSR250P - page 166
166 Troubleshooting Symptom You cannot write a print mark on the still image. The photo save function does not work. Others Symptom The title is not recorded. The cassette label is not recorded. While editing using the DV connecting cable (i.LINK cable), recording picture cannot be monitored. Digital program editing does not function. Cause and/or ...
-
Sony DSR250P - page 167
Additional Information 167 Troubleshooting Symptom The Remote Commander supplied with your camcorder does not work. The input picture does not appear on the LCD screen or in the viewfinder when your camcorder is connected to outputs on the TV or VCR. The melody or beep sounds for five seconds. No function works though the power is on. Cause and/or ...
-
Sony DSR250P - page 168
168 C:21:00 Self-diagnosis display Your camcorder has a self-diagnosis display function. This function displays the current condition of your camcorder as a 5-digit code (a combination of a letter and figures) on the LCD screen or in the viewfinder. If a 5-digit code is displayed, check the following code chart. The last two digits (indicated by ss ...
-
Sony DSR250P - page 169
Additional Information 169 W arning indicators and messages If indicators and messages appear on the LCD screen or in the viewfinder, check the following: See the page in parentheses “ ( ) ” for more information. Warning indicators E The battery is dead or nearly dead Slow flashing: • The battery is nearly dead. Depending on conditions, the E ...
-
Sony DSR250P - page 170
170 Warning indicators and messages 100-0001 “ (Warning indicators) Memory Stick ” file error* Slow flashing: • File is broken. • File has no compatibility. “ Memory Stick ” format error* Fast flashing: • There are two directories or more. • Data is broken. •“ Memory Stick ” is not formatted correctly (p. 124). Warning message ...
-
Sony DSR250P - page 171
Additional Information 171 Using your camcor der abroad Using your camcorder abroad You can use your camcorder in any country or area with the optional AC power adaptor within 100 V to 240 V AC, 50/60 Hz. Your camcorder is a PAL system-based camcorder. If you want to view the playback picture on a TV, it must be a PAL system-based TV equipped with ...
-
Sony DSR250P - page 172
172 Maintenance information and pr ecautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly. If the ...
-
Sony DSR250P - page 173
Additional Information 173 Maintenance information and precautions Removing Dust from Inside the Viewfinder ( 1 ) While holding down the Eyepiece release catch 1 , hinge up the eyecup. ( 2 ) Clean the surface with a commercially available blower. Maintenance information Cleaning the video head To ensure normal recording and clear pictures, clean th ...
-
Sony DSR250P - page 174
174 Maintenance information and precautions Charging the vanadium-lithium battery in your camcorder Your camcorder is supplied with a vanadium-lithium battery installed so as to retain the date and time, etc., regardless of the setting of the POWER switch. The vanadium- lithium battery is always charged as long as you are using your camcorder. The ...
-
Sony DSR250P - page 175
Additional Information 175 Maintenance information and precautions • Do not let sand get into your camcorder. When you use your camcorder on a sandy beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause your camcorder to malfunction, and sometimes this malfunction cannot be repaired. Notes on dry batteries To avoid p ...
-
Sony DSR250P - page 176
176 Specifications General Peak inrush current (1) Hot switching inrush curr ent, measured in accor dance with European standard EN55103-1: 6.3 A (230 V) Power requir ements 14.4 V (Lithium-ion battery pack) 12 V (1 1 to 17 V) (AC power adaptor) A verage power consumption (when using the battery pack) During camera recor ding using LCD 12.1 W V iew ...
-
Sony DSR250P - page 177
177 Quick Reference — Quick Reference — Identifying the parts and contr ols 1 VF connector (p. 187) 2 MIC IN +48V connector (p. 7) 3 Zoom ring (p. 25) 4 Focus ring (p. 45) 5 ST ART/STOP button (p. 15) 6 SHUTTER switch (p. 40) Camcorder INDEX MARK AUDIO LEVEL WHT BAL SHUTTER OFF ON 1 2 ST ART/STOP 1 2 3 4 5 6 7 8 9 q; qa qs 7 Shoulder strap fitt ...
-
Sony DSR250P - page 178
178 Identifying the parts and controls qd AUTO MODE switch (p. 36) qf A TW switch (p. 47) qg AGC switch (p. 38) qh GAIN selector (p. 38) qj WHITE BAL switch (p. 47) GAIN H M L WHITE BAL B A 5800K PRESET CUSTOM PRESET AE SHIFT MENU 3200K 3200K PRESET qd qf qg qh qj qk ql w; wa ws wd qk DISPLA Y button (p. 31) ql AUDIO LEVEL button (p. 54) w; ZEBRA s ...
-
Sony DSR250P - page 179
179 Quick Reference wf wg wh wj wk wl e; ea es ed ef eg wf Remote sensor wg T ALL Y lamp (p. 16) wh T ALL Y switch (p. 16) wj EJECT button (p. 13) wk DC IN 12V connector (p. 1 1) wl DC OUT 12V connector (p. 58) e; LIGHT connector (p. 60) ea ST ART/STOP button (p. 15) es S VIDEO (ID-2) jack (p. 35, 63, 85, 96, 138) ed VIDEO (ID-2) IN/OUT jack (p. 35 ...
-
Sony DSR250P - page 180
180 PLAY MEMORY AUDIO MONITOR AUDIO INPUT AUDIO SELECT CH-1 CH-2 DISPLA Y SELECT DAT A CODE END SEARCH TITLE DIGITAL EFFECT INDEX MEMORY MIX DELETE CH-1 MIX TC U-BIT RESET CH-2 FRONT REAR AUTO MANUAL FRONT REAR AUTO MANUAL PLAY MEMORY AUDIO MONITOR AUDIO INPUT AUDIO SELECT CH-1 CH-2 DISPLA Y SELECT DAT A CODE END SEARCH TITLE DIGITAL EFFECT INDEX M ...
-
Sony DSR250P - page 181
181 Quick Reference Identifying the parts and controls PLAY MEMORY AUDIO MONITOR AUDIO INPUT AUDIO SELECT CH-1 CH-2 DISPLA Y SELECT DAT A CODE END SEARCH TITLE DIGITAL EFFECT INDEX MEMORY MIX DELETE CH-1 MIX TC U-BIT RESET CH-2 FRONT REAR AUTO MANUAL FRONT REAR AUTO MANUAL PLAY MEMORY AUDIO MONITOR AUDIO INPUT AUDIO SELECT CH-1 CH-2 DISPLA Y SELECT ...
-
Sony DSR250P - page 182
182 Identifying the parts and controls th LCD screen (p. 22) tj LCD BRIGHT +/ – buttons (p. 23) tk LCD switch (p. 22) tl LINE/MIC (CH1/CH2) selectors (p. 58) y; Video control buttons (p. 30, 33, 96) ya OPEN button (p. 22) ys Battery attachment interface yd BREAKER button yf AUDIO IN CH1 connector (p. 58, 102) yg AUDIO IN CH2 connector (p. 58, 102 ...
-
Sony DSR250P - page 183
183 Quick Reference yj yk yl u; ua us ud Identifying the parts and controls yj OPEN button (p. 13) yk Cassette lid (p. 13) yl LANC jack LANC stands for Local Application Control Bus System. The LANC control jack is used for contr olling the tape transport of video equipment and peripherals connected to it. This jack has the same function as the jac ...
-
Sony DSR250P - page 184
184 ug uf uh uj uk ul i; ia is id if ig ih ij Identifying the parts and controls Removing the lens hood To remove the lens hood for attachment of the wide teleconversion lens, etc., loosen the lens hood fixing screw, and unscrew the lens hood counterclockwise. When using additional filters We recommend that you use the Sony made filters having the ...
-
Sony DSR250P - page 185
185 Quick Reference ik il o; oa os od of og oh oj ok ol <z// Identifying the parts and controls ik SPOT LIGHT button (p. 28) il BACK LIGHT button (p. 27) o; ND FIL TER selector (p. 17) oa FOCUS selector (p. 45) os FOCUS PUSH AUTO button (p. 45) od F ADER button (p. 67) of POWER switch (p. 15) og EDITSEARCH buttons (p. 29) oh LIGHT switch (p. 60) ...
-
Sony DSR250P - page 186
186 Viewfinder 1 T AKE/T ALL Y lamp This lamp is not used with the camcorder . 2 REC/T ALL Y lamps (p. 15) The below REC lamp is not used with the camcorder . 3 Eyepiece focusing knob (p. 20) 4 Stopper (p. 187) 5 Microphone holding scr ew 6 Microphone holder 7 Microphone 8 LIGHT switch and light 9 BA TT lamp (p. 10) 0 GAIN UP lamp (p. 38) qa SHUTTE ...
-
Sony DSR250P - page 187
187 Quick Reference Removing the viewfinder Remove any microphone from the viewfinder before beginning. ( 1 ) Pull the viewfinder connector out of the VF connector on the front. ( 2 ) Loosen the viewfinder left-to-right positioning ring, then pulling up the stopper, slide the viewfinder out. To fit the viewfinder Reverse the removal procedure. (You ...
-
Sony DSR250P - page 188
188 Identifying the parts and controls Remote Commander The buttons that have the same name on the Remote Commander as on your camcorder function identically to the buttons on your camcorder. 1 T ransmitter Point toward the r emote sensor to control your camcor der after turning on your camcorder . 2 ZERO SET MEMOR Y button This button does not fun ...
-
Sony DSR250P - page 189
189 Quick Reference Identifying the parts and controls To prepare the Remote Commander Insert two R6 (size AA) batteries by matching the + and – polarities on the batteries to the + – marks inside the battery compartment. Notes on the Remote Commander • Point the remote sensor away from strong light sources such as direct sunlight or overhead ...
-
Sony DSR250P - page 190
190 Identifying the parts and controls Operation indicators 1 Cassette memory indicator (p. 26) 2 Remaining battery capacity indicator (p. 26) 3 Zoom indicator (p. 24)/ Data file name indicator (p. 129) 4 Digital effect indicator (p. 69)/ F ADER indicator (p. 67)/ MEMOR Y MIX indicator (p. 71) 5 16:9WIDE indicator (p. 66)/ PROG. SCAN indicator (p. ...
-
Sony DSR250P - page 191
191 Quick Reference Quick Function Guide Functions to adjust exposure (in the recording mode) • Adjusting lights amount for shooting • Shooting backlit subjects • In spotlight, such as at the theater or a formal event Functions to give images more impact (in the recording mode) • Smooth transition between scenes • Taking a still picture ? ...
-
Sony DSR250P - page 192
192 Index A, B A/V connecting cable .................................. 35, 85, 96 AC adaptor ............................ 1 1 Accessory shoe .................... 177 Adjusting shutter speed ...... 40 Adjusting viewfinder ........... 19 AE SHIFT ............................... 44 Audio dubbing .................... 100 AUDIO LEVEL ................... ...
Do you have a question concerning Sony DSR250P?
Use the form below
If you did not solve your problem by using a manual Sony DSR250P, ask a question using the form below. If a user had a similar problem with Sony DSR250P it is likely that he will want to share the way to solve it.