English dropdown-ico

Manual Kenwood KDC-W531

36 pages 1.18 mb
Download

Go to site of 36

Summary
  • Kenwood KDC-W531 - page 1

    CD-RECEIVER KDC-W5031 KDC-W531 INSTR UCTION MANU AL © B64-2952-00/00 (EW/E2W) B64-2952-00_English.indd 1 B64-2952-00_English.indd 1 04.11.8 10:47:01 AM 04.11.8 10:47:01 AM ...

  • Kenwood KDC-W531 - page 2

    2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 About MP3 and WMA 6 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent F aceplate TEL Mute T uner fea tures 12 T uning T uning Mode Station Pr eset Memor y Auto Memory Entr ...

  • Kenwood KDC-W531 - page 3

    English | 3 Safety precautions About CD play ers/disc changers connected to this unit (KDC-W5031 only) KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players re ...

  • Kenwood KDC-W531 - page 4

    4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly . Normal operation should be re ...

  • Kenwood KDC-W531 - page 5

    English | 5 Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier t o damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD . Also, don ’t use a CD with tape stuck on it. When using a new CD If the CD center hole ...

  • Kenwood KDC-W531 - page 6

    6 | English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly. Playable A udio file • MP3, WMA • Attach the correct exten ...

  • Kenwood KDC-W531 - page 7

    English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 22) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selecting the S ourc e Press the [SRC] button. Source required Display ...

  • Kenwood KDC-W531 - page 8

    8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time the button is pressed, the Att enuator turns ON and OFF . When it’ s ON, the " A T T" indicator blinks. Sy stem Q Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press ...

  • Kenwood KDC-W531 - page 9

    English | 9 4 Adjust the A udio setup item T urn the [ VOL] knob . Adjustment Item Display Range V olume offset "V-OFF" –8 — ±0 Loudness "L OUD" ON/OFF • Volume off set: Each source’ s volume can be set as a difference fr om the basic volume. • Loudness: Compensating for low and high t ones during low volume. 5 Exit A ...

  • Kenwood KDC-W531 - page 10

    10 | English General fea tures Switching Displa y Switching the information displa yed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob to [ 4 ] or [ ¢ ]. In T uner source (KDC- W5031) Information Display Progr am Ser vice name or F ...

  • Kenwood KDC-W531 - page 11

    English | 11 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release butt on. Drop open the faceplate. 2 Dra wing the faceplate to left side pull it to the front and remov e it. • The faceplate is a precision piece of equipment and can be damaged ...

  • Kenwood KDC-W531 - page 12

    12 | English T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands. 3 T une up or down band Push the Contr ol knob to [ 4 ] or ...

  • Kenwood KDC-W531 - page 13

    English | 13 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry ...

  • Kenwood KDC-W531 - page 14

    14 | English RDS featur es F unction of the KDC-W5031 T raffic Information Switching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Press the [TI] button. Each time the button is pressed, the Traffic information function turns ON and OFF . When it’ s ON, " TI" indica ...

  • Kenwood KDC-W531 - page 15

    English | 15 During PT Y mode the "PT Y" indicator is ON. • This function can’t be used during a traffic bulletin or AM reception. 2 Select the Program T ype Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed, the Program Type switches as shown below . No. Program T ype Display 1. Speech "SPEECH" 2. News &q ...

  • Kenwood KDC-W531 - page 16

    16 | English RDS featur es F unction of the KDC-W5031 Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed, the l ...

  • Kenwood KDC-W531 - page 17

    English | 17 CD/Audio file/External disc contr ol features SRC SCAN REP F.SEL M.RDM RDM/ 3 IN indicator Disc number Track time Track number Control knob F unction of the KDC-W5031 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you w ...

  • Kenwood KDC-W531 - page 18

    18 | English CD/Audio file/External disc contr ol features F ast Forwarding and Re versing F ast Forwarding Hold down on [ ¢ ] of the Contr ol knob. Release your finger to play the disc at that point. Reversing Hold down on [ 4 ] of the Contr ol knob. Release your finger to play the disc at that point. • The sound is not output while the Audio f ...

  • Kenwood KDC-W531 - page 19

    English | 19 T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder y ou’ re listening to . Press the [REP] button. Each time the button is pressed, the Repeat P lay switches as shown below . In CD & External disc source Repeat play Display T rack Repeat "TRAC REP" Disc Repeat (In Disc Chan ...

  • Kenwood KDC-W531 - page 20

    20 | English CD/Audio file/External disc contr ol features F unction of Audio file Folder Select Quickly selecting the folder you want to listen to . 1 Enter F older Select mode Press the [F .SEL] button. "F-SELEC T" is displayed. During Select mode the folder information is displayed as shown below . Folder name displa y Displays the cur ...

  • Kenwood KDC-W531 - page 21

    English | 21 Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 2 Select ...

  • Kenwood KDC-W531 - page 22

    22 | English Menu system F unction of the KDC-W5031 In Standby mode Secur ity C ode Because authorization by the Security Code is required when it’ s removed from the vehicle , personalizing this unit is by using the Security Code is a help in preventing theft. • When the Security Code function is activated, it can’t be released. Note, your S ...

  • Kenwood KDC-W531 - page 23

    English | 23 F unction of the KDC-W5031 In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manuall y. • It takes 3 to 4 minutes to synchronize the clock. In Standby mode DSI (Disabled Sy stem Indicator ...

  • Kenwood KDC-W531 - page 24

    24 | English Menu system F unction of the KDC-W5031 Auxiliary Input Display Setting For selecting the display when swit ched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the " AUX EXT " display . F unction of the KDC-W5031 AF (A lternative F requency) When poor reception is experienced , automa ...

  • Kenwood KDC-W531 - page 25

    English | 25 T ext Scroll Setting the displayed text scroll. Display Setting "SCL MANU" D oesn ’t scr oll. "SCL AUT O" Scrolls when the display changes . • The text scrolled is shown below . - CD tex t - F older name/ File name/ Song title/ Artist name/ Album name - MD title - R adio text 2 Enter Menu mode Press the [MENU] b ...

  • Kenwood KDC-W531 - page 26

    26 | English Menu system In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Contr ol knob to [FM] or [AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the C ontrol knob for at least 2 seconds. Each time the knob is pressed at least 2 seconds, the Demonstration ...

  • Kenwood KDC-W531 - page 27

    English | 27 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 5 ..........2 6 ..........1 7 ..........1 Installation Proc edure 1. T o prevent shor t cir cuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections ...

  • Kenwood KDC-W531 - page 28

    28 | English Connecting W ires to T erminals P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT REMO. CONT MUTE Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) To connect the KENWOOD navigation system, consult your navigation manual. Wiring harness (Access ...

  • Kenwood KDC-W531 - page 29

    English | 29 Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White P ower Control A-7 Red Ignition (AC C) A-8 Black Ear th (Ground) Connection Speaker Connector B-1 Purple Rear Right (+) B-2 Purple/Black Rear Right (–) B-3 Gray ...

  • Kenwood KDC-W531 - page 30

    30 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Installation Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of ...

  • Kenwood KDC-W531 - page 31

    English | 31 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations. • The frame can be removed from the bottom side in the same manner ...

  • Kenwood KDC-W531 - page 32

    32 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t cir cuits in the wires, repl ...

  • Kenwood KDC-W531 - page 33

    English | 33 Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 3) of the section on <Safety precautions>. ? The specified disc does not play , but ...

  • Kenwood KDC-W531 - page 34

    34 | English The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine. ➪ L oad a disc into the disc magazine. TOC E ...

  • Kenwood KDC-W531 - page 35

    English | 35 Specifications Specifications subject to change without notice. MP3 decode : Compliant with MPEG-1/2 Audio Layer -3 WMA decode : Compliant with Windows Media Audio Audio section Maximum output power KDC-W5031: 50 W x 4 KDC-W531: 45 W x 4 Output power (DIN 45324, +B=14.4V ) KDC-W5031: 30 W x 4 KDC-W531: 28 W x 4 T one ac tion Bass : 100 ...

  • Kenwood KDC-W531 - page 36

    B64-2952-00_English.indd 36 B64-2952-00_English.indd 36 04.11.8 10:47:20 AM 04.11.8 10:47:20 AM ...

Manufacturer Kenwood Category CD Player

Documents that we receive from a manufacturer of a Kenwood KDC-W531 can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-W531 manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-W531
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-W531.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-W531, service manual, brief instructions and user manuals Kenwood KDC-W531. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-W531.

Similar manuals

A complete manual for the device Kenwood KDC-W531, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-W531 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-W531.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-W531 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-W531, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-W531, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-W531 - which should help us in our first steps of using Kenwood KDC-W531
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-W531
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-W531 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-W531?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-W531, ask a question using the form below. If a user had a similar problem with Kenwood KDC-W531 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)