English dropdown-ico

Manual Paxar 9462

12 pages 0.47 mb
Download

Go to site of 12

Summary
  • Paxar 9462 - page 1

    Monarch®, Pathfinder® Ultra®, 6039, 9462, a nd 9465 are trademarks of Paxar Americas, Inc. Paxar® is a trademark of Paxar Corporation. Avery Dennison® is a trademark of Avery Dennison Corporation. TC6039QR Rev. AE 1/08 ©2005 Pa xar Americas, Inc. a subsidia ry of Avery Dennison Corp. All Rights Reserved. QUICK REFERENCE This Quick Re ference ...

  • Paxar 9462 - page 2

    2 Attaching the Safety Strap 1. Turn the printer upside down, resting its top in the table. 2. Remove the stylus strap from the loop. 3. Take the thin end of the safety strap, and push it through the loop at the bottom of the printer han dle (near the battery comp artment). 4. Push the thick en d of the safe ty strap through the thin end ’s loop. ...

  • Paxar 9462 - page 3

    3 Changing the Main B attery Always take the main ba ttery out of the printer when s toring the printer and connect the Battery Backup Power. 1. Turn the printer over and press the button on the battery comp artment door (at the botto m of the pr inter’s handle) and slide it o pen. 2. Turn the printer upright, holding your palm beneath the open b ...

  • Paxar 9462 - page 4

    4 Note: If the printer does not ha ve a main battery or is not connected to the Bat tery Backup Power , it loses its charge and the printer’s s ystem settings. 5. Remove the main battery from the battery compartment. 6. Connect the Battery Backup Power as shown. Loading Supplies 1. Turn on the printer. 2. Press the latch buttons and op en the sup ...

  • Paxar 9462 - page 5

    5 6. Place a roll of sup ply in the supply holder so it unrolls fr om the bottom . 7. Load the supplies for the pr inting mode you want: Pe el or Non-Peel. Loading for Non-Peel Mode 1. Feed the supply under the ap plicator roller a nd over the label defl ector. 2. Close the supply cover. 3. Select Load S upply from the printer icon menu, choose you ...

  • Paxar 9462 - page 6

    6 3. Feed all four inches of the backing pap er over the peel bar and u nder the applicator roller a nd the labe l deflector . 4. Push the label deflector up until it snaps into p lace. 5. Partially close the co ver to the first position . 6. Pull the backing paper over the guide roller, down to the pinch and feed rollers. 7. Hold the backing paper ...

  • Paxar 9462 - page 7

    7 Changing the Display Settings To change the backlight, sound (bee p) and other s tandard Windows options , from the Start Menu select Settings , Control Panel . Using the Keypad The printer ’s keypad appears below . Key(s) Descript ion Enter Accepts data or a me nu selection. Tab Tabs to the next tab stop or the next fie ld. Pressing Fct + Tab ...

  • Paxar 9462 - page 8

    8 Entering Data Entering data using the keypad is simila r to en tering data on a cell ph one. There are three data entry modes: ♦ Normal (Numeric) mode – Default . Press the key to displa y what appears on the fa ce of the key (numb ers). ♦ Lower-Case Alpha betic mode – Press Alpha once to display lower-case letters. Press th e key several ...

  • Paxar 9462 - page 9

    9 Black Mark Sensor On- Demand Sensor Platen Roller Cleaning th e Pinch and Feed Rollers 1. Turn off the printer and ope n the supply cover. 2. Remove the supplies. 3. Turn the pla ten roller with your fingers and run a dry, lin t-free cloth across the pinch and fee d rollers as the y turn. Make sure the rollers are clean all the way around. If tha ...

  • Paxar 9462 - page 10

    10 Scanner Flex Cable Adhesiv e Buildup 4. Use a dry, soft-bri stle brus h, such as a toothbr ush, to clean the pl aten roll er. 5. Turn the platen roller with your finger and then continue cle aning. 6. Reload the supplies, close the labe l deflector and supply cover . If the brush does not remove all the adhesive, mo isten a cotton swab with isop ...

  • Paxar 9462 - page 11

    11 Troubleshooting This section l ists some common problems and their solutions. Problem Solution Printer does not print. Switch to a fully-charged ba ttery. Load the supply correctly. Clean the printhead. Printer does not feed. Switch to a fully-charged ba ttery. Close the supply cover completely. Load the supply correctly. Check the platen roller ...

  • Paxar 9462 - page 12

    12 Error Codes Following are some common error codes you may receive. See your System Administrator if you receive any codes not listed here. Code(s) Description 004 – 005 Supply size is incorrect. Reload the correct supplies. 267 – 271 410 – 413 Communication error. See y our System Administrator. 703 – 704 Load supplies or make sure they ...

Manufacturer Paxar Category Printer

Documents that we receive from a manufacturer of a Paxar 9462 can be divided into several groups. They are, among others:
- Paxar technical drawings
- 9462 manuals
- Paxar product data sheets
- information booklets
- or energy labels Paxar 9462
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paxar 9462.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paxar 9462, service manual, brief instructions and user manuals Paxar 9462. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paxar 9462.

Similar manuals

A complete manual for the device Paxar 9462, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paxar 9462 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paxar 9462.

A complete Paxar manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paxar 9462 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paxar 9462, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paxar 9462, that we can find in the current document
3. Tips how to use the basic functions of the device Paxar 9462 - which should help us in our first steps of using Paxar 9462
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paxar 9462
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paxar 9462 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paxar 9462?

Use the form below

If you did not solve your problem by using a manual Paxar 9462, ask a question using the form below. If a user had a similar problem with Paxar 9462 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)