-
Dolby Laboratories DVD Micro Theater System - page 1
1 O WNER'S MANU AL D VD HOME THEA TER SYSTEM CD -R CD -R W VCR A V INPUT CD PLAYBACK R SIZE : 148 X 210mm ...
-
Dolby Laboratories DVD Micro Theater System - page 2
E - 1 IMPOR T ANT SAFETY INSTR UCTIONS W ARNI NG The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within th ...
-
Dolby Laboratories DVD Micro Theater System - page 3
E - 2 Important Safety Instructions 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 . Retain Instructions - The safety and operating instructions should be retained for future reference. 3 . Heed Warnings - All warnings on the appliance and in the operating instructions should be ...
-
Dolby Laboratories DVD Micro Theater System - page 4
E - 3 TABLE OF CONTENTS Important Safety Instruction ......................1-2 Disc Formats ................................................ 4 Before You Start ........................................... 5 Using the remote control ........................................... 5 Parts and Functions .................................. 6-8 Remote Control ...
-
Dolby Laboratories DVD Micro Theater System - page 5
E - 4 The Unit can playback discs bearing any of the following marks: Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, th ...
-
Dolby Laboratories DVD Micro Theater System - page 6
E - 5 BEFORE YOU ST AR T To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the batteries. Notes: • If the Remote Control is not going to be used for a long time, remove the batteries to avoid damage caused by b ...
-
Dolby Laboratories DVD Micro Theater System - page 7
E - 6 PARTS AND FUNCTIONS (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) Remote Control 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button Return to the normal operation after using the SETUP menu. 3) Number (0 - 9) and (+10) buttons Us ...
-
Dolby Laboratories DVD Micro Theater System - page 8
E - 7 PARTS AND FUNCTIONS Remote Control (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) 19 ) FUNCTION button Display the FUNCTION screen where you can check or change various setting. 20 ) OPEN / CLOSE button Use to open or close the disc tray. 2 1 ) GOTO button Skip dire ...
-
Dolby Laboratories DVD Micro Theater System - page 9
E - 8 Rear Panel PARTS AND FUNCTIONS 12) Power cord 13) VIDEO OUT jack 14) Left/Right AUDIO OUT jacks 15) COMPONENT VIDEO jacks (Y, P B /C B , P R /C R ) 16) VIDEO IN (VCR) jack 17) FM ANTENNA jack 18) SUBWOOFER AUDIO OUT jack 19) DIGITAL AUDIO OUT jack 20) S-VIDEO OUT jack 21) AUDIO IN (R/L) jacks 22) AM(MW) LOOP ANTENNA terminal Note: Screen save ...
-
Dolby Laboratories DVD Micro Theater System - page 10
E - 9 DISPLA Y Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit. "Invalid Region" appears on the TV screen. (The disc cannot be played). If no disc is loaded when the Main Unit is switched on. Tray open Tray closed Loading Stopped Playing Pau ...
-
Dolby Laboratories DVD Micro Theater System - page 11
E - 10 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) FM Connect FM antenna (included) to the FM ANTENNA jacks. AM(MW) Connect the loop antenna (included) to the AM(MW) LOOP ANTENNA terminals. For better reception A . Connecting your TV The unit can be connected to ...
-
Dolby Laboratories DVD Micro Theater System - page 12
E - 11 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) Analogue connection Using the Audio cable (not supplied), connect the left/right AUDIO OUT jac k on your Unit to the A UDIO IN jac k. Digital connection Using the Coaxial Digital Audio cable (not supplied), conne ...
-
Dolby Laboratories DVD Micro Theater System - page 13
E - 12 SETUP C. Connecting a VCR 1. Using the supplied A udio/Video cable , connect the yellow plug from VIDEO OUT jack on y our Unit to VIDEO IN jac k on your TV , connect the left and right A UDIO OUT jacks on your Unit to A UDIO IN jacks on y our TV . If you w ant the sound come from the speakers of the Main Unit, you need not to connect these l ...
-
Dolby Laboratories DVD Micro Theater System - page 14
E - 13 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D. Connecting the speakers & subwoofer The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the ...
-
Dolby Laboratories DVD Micro Theater System - page 15
E - 14 E. Positioning the speakers and subwoofer SETUP CENTER Pla ce on the t op of or be lo w th e TV . REAR SPEAKE R S Place right besi de or slightly behi nd your li ste ni ng pos it ion , and a little high er than y our ears. SUB WOO FER Can be p l aced anywhe r e. FRO NT SPEAK ERS Pla ce on bo th si des of th e T V , equal distances a par t. ...
-
Dolby Laboratories DVD Micro Theater System - page 16
E - 15 SETUP Turning on the Unit and TV 1 )Press the ST ANDBY/ON button to turn the Unit ON, or 2 )Press the ST ANDBY /ON button on the remote control or the FUNCTION b utton or the PLA Y button to turn on the Unit while the Unit is in standby mode. 3 )T ur n on the TV by pressing its P O WER button. 4 )Select the channel on your TV corresponding t ...
-
Dolby Laboratories DVD Micro Theater System - page 17
E - 16 ADJUSTING THE SOUND (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) To adjust the surround sound balance while Dolby Digital and Pro Logic II decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) • Pres ...
-
Dolby Laboratories DVD Micro Theater System - page 18
E - 17 ADJUSTING THE SOUND To select the listening channel 1. When the disc is stopped, you can press the 5.1/2.1 CH button on the remote control to select different speakers output status shown on below table. 2. At A V IN function mode, you also can press the PRO LOGIC II b utton repeatedly on the remote control to select PRO LOGIC II (indicator ...
-
Dolby Laboratories DVD Micro Theater System - page 19
E - 18 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) PLA YING A DISC DV D C D This owner’ s manual explains the basic instructions of this D VD Unit. Some D VD discs are produced in a manner that allo ws specific or limited operation during playbac k. As such, the D VD ...
-
Dolby Laboratories DVD Micro Theater System - page 20
E - 19 Fast Forward/Fast Reverse 1. Press the TUNING or TUNING button when a disc is pla ying. • The disc begins fast scan at x2 speed. • Four speeds are a v ailable . Each time TUNING or TUNING button is pressed, the speed of fast scan changes in the following sequence: 2. Press the PLA Y button when y ou reach the desired point to resume play ...
-
Dolby Laboratories DVD Micro Theater System - page 21
E - 20 DV D Angle selection Some D VDs contain scenes which ha ve been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are pla ying a D VD with different angles recorded, press the ANGLE button to view the number of the current angle. 2. Press the ANGLE button r ...
-
Dolby Laboratories DVD Micro Theater System - page 22
E - 21 SPECIAL FUNCTIONS DV D DISPLA Y function Using DISPLA Y , you can chec k and change the current settings of the following items: ANGLE, A UDIO and SUBTITLE. • While the disc is playing, press the DISPLA Y button to displa y the screen shown belo w . Elapsed time : Elapsed time from the beginning of the chapter which is currently pla ying. ...
-
Dolby Laboratories DVD Micro Theater System - page 23
E - 22 Locating a specific title If a D VD disc contains title numbers, y ou can locate a specific title by directly selecting a title number . 1. In stop mode, press the GOTO button. 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3. Press the ENTER button to confirm. The Unit ...
-
Dolby Laboratories DVD Micro Theater System - page 24
E - 23 DV D C D Locating a specific time Y ou can move to a specific location b y entering its corresponding time (hours, minutes , seconds) 1. Press the GOTO button. 2. Press or button to highlight time. 3. Press the corresponding number buttons for the setting point you want. • The first two n umbers you entered represent hours. • The second ...
-
Dolby Laboratories DVD Micro Theater System - page 25
E - 24 Programmab le memory The two types of prog rammed playbac k provided b y this Unit are title programmed pla yback and chapter progr ammed pla yback. Title / Chapter programmed pla yback 1. Press the MEMORY b utton while the disc is stopped. 2. Enter the title numbers in - - . Use or button to mov e the highlight to chapter and enter the chap ...
-
Dolby Laboratories DVD Micro Theater System - page 26
E - 25 Y ou can play a specific title or chapter repeatedly . (Title repeat, chapter repeat, A-B repeat) Repeating a title Y ou can play the same title repeatedly . 1 . While the disc is playing, press the REPEA T DISC button until the “ ” indicator displays on the screen. The current title is pla y ed repeatedly . Repeating a chapter Y ou can ...
-
Dolby Laboratories DVD Micro Theater System - page 27
E - 26 This Unit will play MP3 and Picture files recorded on CD-R disc . Playing a MP3 file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Insert a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The Unit will take a short while to load the disc and automatically begin p ...
-
Dolby Laboratories DVD Micro Theater System - page 28
E - 27 PLA YING MP3 AND PICTURE FILE DISC Playing a Picture file disc 1. Press the OPEN/CLOSE button, the disc tray opens. 2. Insert a Picture CD on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a short while to load the disc. 5 . Press the PLA Y button. The ne xt picture will auto ...
-
Dolby Laboratories DVD Micro Theater System - page 29
E - 28 T uning into a station man ually 1. Press the FUNCTION button until the frequency band appears on the display . 2. Press the BAND button on the remote remote or STOP button on the front panel to select the desired band. 3. Press the TUNING button to tune in the desired station. FM Stereo • Press the FM MODE button on the remote until " ...
-
Dolby Laboratories DVD Micro Theater System - page 30
E - 29 LANGU A GE setting 1. Press the FUNCTION button until D VD appears on the display . 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER b utton. The screen will change to English W ordings immedi ...
-
Dolby Laboratories DVD Micro Theater System - page 31
E - 30 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be view ed on a conv entional TV screen. • Some wide-screen D VDs that do not per mit Pan Scan mode pla yback are automatically played in letterbox mode (black bands top and bottom). 4:3 Letter Box • When wide- ...
-
Dolby Laboratories DVD Micro Theater System - page 32
E - 31 CUST OMIZING THE FUNCTION SETTINGS Brightness 1. Press the SETUP button. 2. Use or b utton to select Video , then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button. 5. If you want to exit the SETUP MENU and return to the ...
-
Dolby Laboratories DVD Micro Theater System - page 33
E - 32 A UDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. T o exit the FUNCTION SETUP MENU and return to the nor mal screen, press the RETURN button. L/R Speaker 1. Press the ...
-
Dolby Laboratories DVD Micro Theater System - page 34
E - 33 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Subwoof er , and then press the ENTER b utton. 4. Use or button to select the desired setting, and ...
-
Dolby Laboratories DVD Micro Theater System - page 35
E - 34 Pink noise 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Pink noise, and then press the ENTER button. 4. Use or button to select the desired setting, and then press the ENTER button. 5. T o exit the FUNCTION SETUP MENU and return to the nor mal screen, press the RETURN button. Pi ...
-
Dolby Laboratories DVD Micro Theater System - page 36
E - 35 CUST OMIZING THE FUNCTION SETTINGS RA TING setting Password/Parental lock D VD discs equipped with the password function are rated according to their content. The contents allow ed by a parental lock le v el and the wa y a D VD disc can be controlled may v ary from disc to disc. For example, if the disc allowed, you could edit out violent sc ...
-
Dolby Laboratories DVD Micro Theater System - page 37
E - 36 Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the F actor y Set, then press the ENTER button. 4. Use or b utton to shift and select Y es, then press the ...
-
Dolby Laboratories DVD Micro Theater System - page 38
E - 37 Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Code FY GA GB GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV La nguage N ame Fri sian Irish Scot s G aelic Ga li cian Gu arani Gujar at i Hau sa Hi ndi Cr oat ian Hun garian Arm enian Int ...
-
Dolby Laboratories DVD Micro Theater System - page 39
E - 38 Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are e xtremely dir ty , wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly , then wipe with a dr y cloth. • Nev er us ...
-
Dolby Laboratories DVD Micro Theater System - page 40
E - 39 SYMPT OM CA USE (AND REMED Y) • Check that the speak ers and equipment are connected securely . • Make sure that you've selected the corrected equipment on the system. • The system is in pause mode or in Slow-motion Pla y mode . Press the PLA Y b utton to return to normal play mode. • Fast f orward or f ast re verse is perf or m ...
Do you have a question concerning Dolby Laboratories DVD Micro Theater System?
Use the form below
If you did not solve your problem by using a manual Dolby Laboratories DVD Micro Theater System, ask a question using the form below. If a user had a similar problem with Dolby Laboratories DVD Micro Theater System it is likely that he will want to share the way to solve it.