English dropdown-ico

Manual Grizzly G0560

44 pages 3.27 mb
Download

Go to site of 44

Summary
  • Grizzly G0560 - page 1

    MEAT-CUTTING BANDSAW MODEL G0560 INSTRUCTION MANUAL COPYRIGHT © DECEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #5906 PRINTED IN TAIWAN ...

  • Grizzly G0560 - page 2

    WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonr ...

  • Grizzly G0560 - page 3

    Table of Contents SECTION 1: SAFETY ........................................................................................................................2 Safety Instructions for Power Tools ............................................................................................ 2 Additional Safety Instructions for Meat Saws ................ ...

  • Grizzly G0560 - page 4

    -2- G0560 Meat-Cutting Bandsaw 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 8. USE RIGHT TOOL. D ...

  • Grizzly G0560 - page 5

    G0560 Meat-Cutting Bandsaw -3- 9. USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your e ...

  • Grizzly G0560 - page 6

    -4- G0560 Meat-Cutting Bandsaw Bacteria from raw meat has been frequently linked to illness and even death! Describing proper meat handling techniques outside of cleaning the bandsaw is beyond the scope of this manual. If you are unclear about sanitary meat handling practices, contact your local Board of Health or the USDA to research the proper me ...

  • Grizzly G0560 - page 7

    G0560 Meat-Cutting Bandsaw -5- Grizzly Industrial, Inc. is proud to offer the Model G0560 Meat-Cutting Bandsaw. This machine is part of Grizzly’s growing family of fine machinery. When used according to the guidelines stated in this manual, you can expect years of trouble-free, enjoyable operation. The Model G0560 is intended for home or pro- fes ...

  • Grizzly G0560 - page 8

    -6- G0560 Meat-Cutting Bandsaw The Model G0560 features a 110/220V 3 ⁄ 4 HP motor that is prewired at 110V. Amperage Draw 110V (prewired) .................................... 12 Amps 220V ...................................................... 6 Amps Use the following guidelines when choosing a cir- cuit breaker (circuit breakers rated any higher ...

  • Grizzly G0560 - page 9

    G0560 Meat-Cutting Bandsaw -7- Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded. If you find it necessary to use an extension cord with this machine: • Only use a cord that is rated for standard ser- vice (Grade S). • O ...

  • Grizzly G0560 - page 10

    -8- G0560 Meat-Cutting Bandsaw 1. Adjustable Blade Guard 2. Blade Guide 3. Sliding Table 4. Small Cutting Fence 5. ON/OFF Switch 6. Large Cutting Fence 7. Meat Grinder/Sausage Stuffer Figure 2. Main view of machine features. 5 4 3 6 1 SECTION 4: MACHINE FEATURES 7 2 ...

  • Grizzly G0560 - page 11

    G0560 Meat-Cutting Bandsaw -9- This machine left our warehouse in a carefully packed crate or box. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherw ...

  • Grizzly G0560 - page 12

    -10- G0560 Meat-Cutting Bandsaw Figure 5. Table, fence and grinder pieces. Figure 6. Motor, drive belt, and switch pieces. Figure 4. Stand pieces. Table, Fence and Grinder Pieces ( Figure 5 ) L. Table ..........................................................1 M. Slide Rail ....................................................2 N. Large Fence....... ...

  • Grizzly G0560 - page 13

    G0560 Meat-Cutting Bandsaw -11- Hardware Recognition Chart ...

  • Grizzly G0560 - page 14

    -12- G0560 Meat-Cutting Bandsaw Unsupervised children and visitors could cause serious personal injury to them- selves with this machine. Choose a site for placement in your shop where you can safely lock visitors and chil- dren away when you are not with them. Floor Load The Model G0560 weighs 127 lbs. and has a base footprint of 16" x 18&quo ...

  • Grizzly G0560 - page 15

    G0560 Meat-Cutting Bandsaw -13- Components and Hardware Needed: Qty Rubber Feet ......................................................4 Feet Bracket ......................................................4 Hex Bolt M6-1 x 20 ............................................4 Stand Side ..........................................................2 Stand Sid ...

  • Grizzly G0560 - page 16

    -14- G0560 Meat-Cutting Bandsaw Figure 12. Switch & cord installed on stand. Components and Hardware Needed: Qty Switch ................................................................1 Switch Cover ......................................................1 Power Cord ........................................................1 Tools Needed: Phillips ...

  • Grizzly G0560 - page 17

    G0560 Meat-Cutting Bandsaw -15- Figure 13. Motor mounted to motor mount. Components and Hardware Needed: Qty Motor ..................................................................1 Hex Bolt M8-1.25 x 20 ........................................4 Hex Nut M 8-1.25 ..............................................4 Flat Washer 8mm ...................... ...

  • Grizzly G0560 - page 18

    -16- G0560 Meat-Cutting Bandsaw Before you put on the V-belt, make sure that the motor pulley and the upper pulley are reasonably aligned. To do this, loosen the setscrew on the motor pulley, adjust the motor pulley so it is in-line with the upper pulley, then tighten the setscrew. To put on the V-belt: 1. Loosen the (4) motor mount bolts. 2. Raise ...

  • Grizzly G0560 - page 19

    G0560 Meat-Cutting Bandsaw -17- Stand Covers Figure 18. Catch tab in place on stand cover. Components and Hardware Needed: Qty Tap Screws #6 x 3 ⁄ 8 " ........................................12 Catch Tabs ......................................................12 Stand Covers ......................................................2 Tools Needed ...

  • Grizzly G0560 - page 20

    -18- G0560 Meat-Cutting Bandsaw Figure 21. Installing rails on table. The sliding table allows you to move the blade through the meat. Components and Hardware Needed: Qty Sliding Table ......................................................1 Rail ....................................................................2 Force Plate ...................... ...

  • Grizzly G0560 - page 21

    G0560 Meat-Cutting Bandsaw -19- Figure 23. Securing rails in the sliding table. Figure 22. Installing force plate. 4. Secure the rails to the end of the table using the knob screws as shown in Figure 23 . 2. Slide the bandsaw blade through the slot in the sliding table and place the table on the rollers. Note— Be careful when placing the table on ...

  • Grizzly G0560 - page 22

    -20- G0560 Meat-Cutting Bandsaw Figure 25. Fence supports to table. Figure 26. Fences assembled. Figure 27. Fences installed on supports. The fences allow you to support the meat as you slide it through the blade while also controlling the thickness of cut. Components and Hardware Needed: Qty Fence Support Brackets ................................. ...

  • Grizzly G0560 - page 23

    G0560 Meat-Cutting Bandsaw -21- Meat Grinder The Model G0560 comes with a meat grinder. Before assembling this for use, clean and sanitize its parts. See Section 5: Sanitation for details on sanitizing. Figure 28 shows the meat grinder components. Figure 28. Meat grinder components. Figure 29. Keyway location. Figure 30. Sausage stuffer attachment. ...

  • Grizzly G0560 - page 24

    -22- G0560 Meat-Cutting Bandsaw Damage to your eyes and ears could result from using this machine without proper pro- tective gear. Always wear safety glasses and hearing protection when operating this machine. The Model G0560 is operated by an ON/OFF paddle switch that is clearly labeled on the side of the stand. This switch is locked out when the ...

  • Grizzly G0560 - page 25

    G0560 Meat-Cutting Bandsaw -23- Blade Tension The bandsaw blade must be adequately ten- sioned so that it will cut straight and not fall off the wheel during operation. To tension the bandsaw blade: 1. Disconnect the machine from the power source! 2. Remove the thumbscrew that secures the upper cover, then pull the upper cover off the bandsaw unit ...

  • Grizzly G0560 - page 26

    -24- G0560 Meat-Cutting Bandsaw Changing Blades In the event that you need to change blades or remove the current blade for cleaning purposes, follow the instructions below: 1. Disconnect the machine from the power source! 2. Remove the force plate from the end of the table. 3. Slide the table off the rollers and remove it from the bandsaw unit. 4. ...

  • Grizzly G0560 - page 27

    G0560 Meat-Cutting Bandsaw -25- The support bearing backs the blade during oper- ation. As mentioned in the “Blade Guard” instruc- tions, the blade guide assembly (with the support bearing) should be lowered to within an inch from the material you are cutting to be most efficient. The support bearing shown in Figure 38 should be approximately 0 ...

  • Grizzly G0560 - page 28

    -26- G0560 Meat-Cutting Bandsaw NOTICE The following section was designed to pro- vide a basic understanding of the types of items that can be cut with the meat-cutting bandsaw. This manual is in no way a guide to cutting meat, dressing animals or safe meat handling techniques. WE STRONGLY RECOMMEND that you read books, maga- zines or take lessons ...

  • Grizzly G0560 - page 29

    G0560 Meat-Cutting Bandsaw -27- This bandsaw can cut your fingers off or cause other bodily harm. Use a wooden push stick when cutting small pieces and always properly support any item you cut. The meat grinder can easily grind your fingers. Never use your fingers to push meat into the grinder. Always use the provided pusher and remove the meat gri ...

  • Grizzly G0560 - page 30

    -28- G0560 Meat-Cutting Bandsaw Cleaning the Saw Figure 39. Pieces disassembled for cleaning. To clean your bandsaw after use: 1. Remove the table, the blade guards, the fences, and the meat grinder ( Figure 39 ). 2. If used, disassemble the meat grinder ( Figure 40 ). Figure 40. Meat grinder components disassembled for cleaning. 3. Take off the up ...

  • Grizzly G0560 - page 31

    G0560 Meat-Cutting Bandsaw -29- Proper Sanitation All surfaces and working parts that have been exposed to meat must be properly sanitized after each use. Dishwashers are a good option because they sanitize with heat. For all pieces that will not fit in the dishwasher, or if a dishwasher is not avail- able, chemical sanitizers like bleach or iodo- ...

  • Grizzly G0560 - page 32

    -30- G0560 Meat-Cutting Bandsaw Regular periodic maintenance on your Model G0560 Meat-Cutting Bandsaw ensures its opti- mum performance. Make a habit of inspecting your bandsaw each time you use it. Check for the following conditions and repair or replace when necessary. 1. Loose mounting bolts. 2. Worn switch. 3. Worn or damaged cords and plugs. 4 ...

  • Grizzly G0560 - page 33

    G0560 Meat-Cutting Bandsaw -31- The following pages contain the machine data sheets, wiring diagram, parts diagrams, parts lists, and the Warranty/Return information for the Model G0560. If you need parts or help in assembling your machine, or if you need operational information, call the Grizzly Service Department. Trained ser- vice technicians wi ...

  • Grizzly G0560 - page 34

    -32- G0560 Meat-Cutting Bandsaw Design Type .................................................................................................... Floor Model Overall Dimensions: Table ..................................................................................................22 1 ⁄ 2 " L x 16 3 ⁄ 4 " W Height .................... ...

  • Grizzly G0560 - page 35

    G0560 Meat-Cutting Bandsaw -33- G0560 Wiring Diagram ...

  • Grizzly G0560 - page 36

    -34- G0560 Meat-Cutting Bandsaw 2 3 3 81 80 57 52 57 56 41 78 73 77 4 76 63 28 59 62 61 64 60 14 20 3 29 8 31 22 21 24 23 30 65 69 66 32 33 13 26 25 34 74 70 43 38 88 83 84 85 86 44 39 42 71 48 58 20 14 13 3 49 53 35 87 40 79 5 17 19 18 12 11 6 72 46 8 67 1 46 68 46 50 55 ALWAYS REMOVE MEAT GRINDER WHEN NOT IN USE. DAMAGE TO GRINDER WILL RESULT. CA ...

  • Grizzly G0560 - page 37

    G0560 Meat-Cutting Bandsaw -35- REF PART # DESCRIPTION REF PART # DESCRIPTION 49 PFB01M Flange Bolt M6-1 X 12 50 P0560050 Lower Guide Seat 51 PW03M Flat Washer 6mm 52 P608ZZ Ball Bearing 608ZZ 53 PB07M Hex Bolt M8-1.25 X 25 55 P0560055 Clamping Luge 56 P0560056 Blade Guide Block 57 P0560057 Star Knob M6-1 X 12 58 P0560058 Star Knob M8-1.25 X 20 59 ...

  • Grizzly G0560 - page 38

    -36- G0560 Meat-Cutting Bandsaw REF PART # DESCRIPTION REF PART # DESCRIPTION 113 PS01 Phlp Hd Scr 10-24 X 1 ⁄ 2 114 PS22 Phlp Hd Scr 10-24 X 5 ⁄ 8 115 P0560115 Motor Pulley 116 P0560116 Switch Plate 117 P0560117 L Type Set Plate 118 P0560118 Side Cover 119 P0560119 Rubber Pad 120 PN03M Hex Nut M8-1.25 121 PW01M Flat Washer 8MM 122 PCB06M Carri ...

  • Grizzly G0560 - page 39

    G0560 Meat-Cutting Bandsaw -37- REF PART # DESCRIPTION REF PART # DESCRIPTION 216 PS14M Phlp Hd Scr M6-1 X 12 217 PFB08M Flange Bolt M5-.8 X 10 218 PR57M Int Retaining Ring 22mm 219 P608ZZ Ball Bearing 608ZZ 220 PCB12M Carriage Bolt M6-1 X 12 221 PFN02M Flange Nut M6-1 222 PW03M Flat Washer 6MM 223 PFH07M Flat Hd Screw M5-.8 X 10 224 PN06M Hex Nut ...

  • Grizzly G0560 - page 40

    -38- G0560 Meat-Cutting Bandsaw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole writt ...

  • Grizzly G0560 - page 41

    CUT ALONG DOTTED LINE ___Other__________________________________________________ 9. How many of your woodworking machines are Grizzly? _____________ 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" ...

  • Grizzly G0560 - page 42

    TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here Name_______________________________ Street_______________________________ City______________State______Zip______ Send a Grizzly Catalog to a friend: ...

  • Grizzly G0560 - page 43

    ...

  • Grizzly G0560 - page 44

    Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And Discover Why Grizzly ® Is The Industry Leader! Call Today For A FREE Full Color Catalog ...

Manufacturer Grizzly Category Saw

Documents that we receive from a manufacturer of a Grizzly G0560 can be divided into several groups. They are, among others:
- Grizzly technical drawings
- G0560 manuals
- Grizzly product data sheets
- information booklets
- or energy labels Grizzly G0560
All of them are important, but the most important information from the point of view of use of the device are in the user manual Grizzly G0560.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Grizzly G0560, service manual, brief instructions and user manuals Grizzly G0560. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Grizzly G0560.

Similar manuals

A complete manual for the device Grizzly G0560, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Grizzly G0560 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Grizzly G0560.

A complete Grizzly manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Grizzly G0560 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Grizzly G0560, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Grizzly G0560, that we can find in the current document
3. Tips how to use the basic functions of the device Grizzly G0560 - which should help us in our first steps of using Grizzly G0560
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Grizzly G0560
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Grizzly G0560 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Grizzly G0560?

Use the form below

If you did not solve your problem by using a manual Grizzly G0560, ask a question using the form below. If a user had a similar problem with Grizzly G0560 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)