English dropdown-ico

Manual Sanyo PLC-ET30L

78 pages 4.57 mb
Download

Go to site of 78

Summary
  • Sanyo PLC-ET30L - page 1

    Multimedia Pr oject or MODEL PLC-ET30L Owner ’ s Manual *Projection lens is optional. ...

  • Sanyo PLC-ET30L - page 2

    2 ◆ Compact Design This projector is designed compact in siz e and weight. It is easy to car r y and installed anywhere y ou wish to use. ◆ Functionally Ric h This projector has man y useful functions suc h as lens shif ting , ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. ◆ Multi-use Remo ...

  • Sanyo PLC-ET30L - page 3

    3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Feat ures and Design ................ 2 T able of Contents .................. 3 T o the Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Installing the Projector in ...

  • Sanyo PLC-ET30L - page 4

    4 CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS V OL T A GE CONSTITU TING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS S YMBOL INDICA TES THA T TH ...

  • Sanyo PLC-ET30L - page 5

    5 All the saf ety and operating instructions should be read before the product is operated. Read all of the instr uctions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all w arnings and instructions marked on the p ...

  • Sanyo PLC-ET30L - page 6

    6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the follo wing precautions should be taken. – Do not put an y fla ...

  • Sanyo PLC-ET30L - page 7

    7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal plane. When inst alling the projector in upwardly inclined position, instal ...

  • Sanyo PLC-ET30L - page 8

    8 Use the hand grip when moving the projector . Replace the lens cap and retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying. When the projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump ...

  • Sanyo PLC-ET30L - page 9

    9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug. Should the fuse need to be replaced, an A ST A approved BS 1 362 fuse must be used of the same rating, marked thus A S A . If the fuse cov er is detachable, ne ver use the pl ...

  • Sanyo PLC-ET30L - page 10

    10 Bottom Back q Filter w Speaker e Lens Release Butt on r T op Contr ols and Indicators t Maintenance Co ver W ARNING: FOR MAINTE NANCE USE ONL Y . DO NO T OPEN. !6 !3 !5 !4 !1 !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitive objects near this side. u e r t y Front q w i ✽ !0 Infrar ed Remote Receiv ...

  • Sanyo PLC-ET30L - page 11

    11 Rear T erminal q w e r t y i u t USB CONNECT OR (Ser ies B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20). y S-VIDEO INPUT J ACK Connect the S-VIDEO output signal from video equipment to this jac k (p.2 ...

  • Sanyo PLC-ET30L - page 12

    12 !0 R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). !2 MONIT OR OUTPUT TERMINAL (ANAL OG) This terminal outputs the video signal from computer to external video equipment (p.20). ✽ RESET but ton A built-in micro processor whic h controls this unit ...

  • Sanyo PLC-ET30L - page 13

    13 q w e t u i o w LAMP REPLACE indicat or Lights yello w when the projection lamp reac hes its end of lif e (pp.59, 69). q W ARNING TEMP . indicator Blinks red when the internal temperat ure of the projector ex ceeds the operating range (pp.61, 68). e ON/ST AND-B Y butt on T urn the projector on or of f (pp.24–25). r INPUT butt on Se ...

  • Sanyo PLC-ET30L - page 14

    14 o t y q ST AND-B Y butt on T urn the projector of f (p.25). t ON butt on T urn the projector on (p.24). y INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.34– 35). u A UT O PC butt on Automatically adjusts the computer image to its optimum set ting (pp.30, 38). i FREEZE butt on F reeze the pict ure on the screen (p. ...

  • Sanyo PLC-ET30L - page 15

    15 Remote Control !9 !5 !3 !4 !8 !6 !7 @0 !3 MENU butt on Open or close the On-Screen Menu (p.26). !6 ZOOM ed butt ons Zoom in and out the images (p.30). !5 D.ZOOM but ton Select the Digital zoom +/- mode and resize the image (p.47). @0 FOCUS butt on Adjust the f ocus (p.30). !8 MUTE butt on Mute the sound (p.29). !4 P -TIMER button ...

  • Sanyo PLC-ET30L - page 16

    16 Projection angle can be adjusted up to 5.0 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rot ate the both f eet cloc kwise. T o low er the projector or to retract the adjustable feet, rotate the both f eet countercloc kwise. T o correct k ey stone distortion, pr ...

  • Sanyo PLC-ET30L - page 17

    17 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first before c hanging ...

  • Sanyo PLC-ET30L - page 18

    18 ✔ Note:  • Thebrightnessintheroomhasagreatinfluenceonpicturequality .Itisrecommendedtolimit ambientlightinginordertoobtainthebestimage.  • Allmeasurementsareapproximateandmayvaryfromtheactualsiz es. F or projector positionin ...

  • Sanyo PLC-ET30L - page 19

    19 When replacing the lens or using an optional lens, install the lens by follo wing the instructions below . A sk the sales dealer for detailed information of the optional lens specifications. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector . Remo ve the lens mount cov er . 1 2 At taching the len ...

  • Sanyo PLC-ET30L - page 20

    20 Connecting to a Computer (Digital and Analog RGB) Cables used for connection • V GA Cable (HDB 1 5 pin)* • USB Cable • D VI-Digital Cable • A udio Cables (Mini Plug [stereo] x 2) • BNC Cable (*One cable is supplied; other cables are not supplied with the projector .) External A udio Equipment D VI-Digital cable USB cable Audio cable (s ...

  • Sanyo PLC-ET30L - page 21

    21 Connecting to V ideo Equipment (Video, S-V ideo) Cables used for connection • Video Cables (RCA x 1) • A udio Cables (Mini Plug [stereo] x 2) • S-VIDEO Cable • BNC Cable • A udio Cable (RCA x 2) (Cables are not supplied with the projector .) External A udio Equipment Audio cable (stereo) VIDEO S-VIDEO S-video cable Video and audio cabl ...

  • Sanyo PLC-ET30L - page 22

    22 Connecting to V ideo Equipment (Component and RGB Scart) Cables used for connection • A udio Cables (Mini Plug [stereo] x 2) • Scart-V GA Cable • BNC Cable • D VI-Digital Cable (Cables are not supplied with the projector .) External A udio Equipment Audio cable (stereo) Audio Input Component Video Output (Y , Cb/Pb, Cr/Pr) Audio Output A ...

  • Sanyo PLC-ET30L - page 23

    23 NO TE ON THE POWER CORD A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C pow er cord must be used. If supplied A C pow er cord does not matc h your A C outlet, cont act your sales dealer . T o power cord connector on your projector . Pr ojecto ...

  • Sanyo PLC-ET30L - page 24

    24 Connect the projector’ s A C pow er cord into an A C outlet. The PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the top control or the ON but ton on the remote control. The LAMP indicator lights red and the cooling fans start to operate. The preparation displa y appears on the screen and the count down starts. 2 3 1 16 The ...

  • Sanyo PLC-ET30L - page 25

    25 Press the ON/S T AND-B Y but ton on the top control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton or the ST AND-B Y but ton on the remote control again to turn of f the projector . The LAMP indicator t urns off and the PO WER indicator starts to blink green. Af te ...

  • Sanyo PLC-ET30L - page 26

    26 T op Contr ol Menu bar P ointer (red fr ame ) Menu icon Item data Press the P oint 7 8 but tons to adjust the value. SELECT butt on P ointer (r ed frame ) Press the P oint ed but tons to mov e the pointer . Item How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu Quit Exit this menu. The projector can be ...

  • Sanyo PLC-ET30L - page 27

    27 Menu Bar Syst em Select a computer or video system mode (pp.36, 37). Image Adjust Adjust the pict ure image (pp.42–44). – Contrast – Brightness – <Color> – <Tint> – Color temp. – White balance (R/G/B) – Sharpness – Gamma – <Noise reduction> – <Progressiv e> – Reset – Store – Quit Set ting Menu ...

  • Sanyo PLC-ET30L - page 28

    28 The f ollowing lens operation can be made with the Lens but ton on the top control. Press the L ens but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Operating with Projector Control Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point ...

  • Sanyo PLC-ET30L - page 29

    29 1 2 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Sound Menu icon. Press the V OLUME+/– but tons on the top control or on the remote control to adjust the volume. T he volume dialog box appears on the screen for a f ew seconds. Press the MU TE but ton on the remote contro ...

  • Sanyo PLC-ET30L - page 30

    30 Remote Contr ol Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quickly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the F ...

  • Sanyo PLC-ET30L - page 31

    31 Press the NO SH O W but ton on the remote control to blac k out the image. T o restore to normal, press the NO SHO W but ton again or press any other but ton. “No show” disappears af ter 4 seconds. NO SHOW but ton Press the P -TIMER but ton on the remote control. The P -Timer display “0 0:0 0” appears on the screen and the countdo wn sta ...

  • Sanyo PLC-ET30L - page 32

    32 Spotlight Pointer Function P ointer ✔ Note:  • Y oucanc hoosethesizeofSpotlight(Large/Middle/ Small)andthepat ternofPointer(Ar row/Finger/Dot) intheSet tingMenu.See “Pointer”onpage49. This remote control emits a laser beam from the laser light windo w . Press the LA ...

  • Sanyo PLC-ET30L - page 33

    33 Mov e the pointer on the screen with this but ton. PRESENT A TION POINTER butt on R-CLICK butt on L -CLICK butt on Acts as right (clic k) mouse but ton while the projector and a computer are connected with a USB cable. Acts as lef t (clic k) mouse but ton while the projector and a computer are connected with a USB cable. Wireless Mouse Operation ...

  • Sanyo PLC-ET30L - page 34

    34 Remote Contr ol INPUT butt ons T op Contr ol Input Press the INPU T 1, INPU T 2, or INPUT 3 but tons on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation INPUT butt on Press the INPU T but ton on the top control. It switc hes to INPU T 1, INPUT 2, a ...

  • Sanyo PLC-ET30L - page 35

    35 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Input Menu icon. 1 Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. The signal f ormat menu appears. 2 Use the P oint ed but tons to select the desired signal for ...

  • Sanyo PLC-ET30L - page 36

    36 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mo ve the red frame pointer to the A V System Menu icon. 1 V ideo System Selection A V Syst em Menu (Video or S-V ideo) A V Syst em Menu (Component) Use the P oint ed but tons to mo ve the red arrow pointer to the desired system and then press the SELECT but ton ...

  • Sanyo PLC-ET30L - page 37

    37 The Auto PC A djustment function operates to adjust the projector . PC Syst em Menu The PC S ystem Menu icon Selected system is display ed. Sy stems in this dialog box can be selected. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC S ystem Menu icon. Use the P oint ed but ...

  • Sanyo PLC-ET30L - page 38

    38 A uto PC A djustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Mov e the red frame pointer to A uto PC A dj. and press the SELECT button. “Please wait... ” appears while the Auto PC adjustment is in process. PC Adjust Menu PC A djust Menu icon T o st ...

  • Sanyo PLC-ET30L - page 39

    39 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set ting v ...

  • Sanyo PLC-ET30L - page 40

    40 Use the P oint 7 8 but tons to adjust the horizontal area display ed by this projector . Display ar ea H Use the P oint 7 8 but tons to adjust the vertical area display ed by this projector . Display ar ea V Reset Stor e Exit the PC A djust Menu. Quit T o store the adjusted data, select Store and then press the SELECT but ton. Move the red ar ro ...

  • Sanyo PLC-ET30L - page 41

    41 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. Mov e the red frame pointer to the desired image lev el and press the SELECT but ton. ...

  • Sanyo PLC-ET30L - page 42

    42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set ti ...

  • Sanyo PLC-ET30L - page 43

    43 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 1 5). Shar pness ✔ Note:  • Progressivecannotbeselectedwhen48 ...

  • Sanyo PLC-ET30L - page 44

    44 T o store the adjusted data, select Store and press the SELECT but ton. Use the P oint ed but tons to select one from Image 1 to 4 and press the SELECT but ton. A confirmation box appears and then select [Y es]. Stored dat a can be called up by selecting an “Image (1–4)” in the Image Le vel Selection on page 41 . T o reset the adjusted dat ...

  • Sanyo PLC-ET30L - page 45

    45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 2 Screen Adjustment Mov e the red frame pointer to the desired function and press the SELEC ...

  • Sanyo PLC-ET30L - page 46

    46 Wide Pro vide the image to fit the screen size. Nor mal T rue Pro vide the image in its original size. When the original image size is larger than the screen siz e (1 40 0 x 1 050), the projector enters to the panning mode automatically . Use the P oint ed7 8 but tons to pan the image. When adjusted, the arro ws will turn red. When reac hed to t ...

  • Sanyo PLC-ET30L - page 47

    47 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +”appears. Press the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digital zoom + mode b y pressing the D .ZOOM but ton on the ...

  • Sanyo PLC-ET30L - page 48

    48 Screen Size Adjustment (V ideo, Component Signals) Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 2 Pro vide the image at the 4:3 normal v ...

  • Sanyo PLC-ET30L - page 49

    49 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, K orean, and Japanese. Use the P oint ed bu ...

  • Sanyo PLC-ET30L - page 50

    50 Captur e This function enables y ou to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT but ton. A confirmation box appears and select [Y es] to capture the projected image. Af ter capturing the projected image, go to the L ogo select function and set it to “ ...

  • Sanyo PLC-ET30L - page 51

    51 This function pre vents an unauthoriz ed person from c hanging the screen logo. Of f ........... T he screen logo can be c hanged freely from the Logo Menu (p.54). On ............ The screen logo cannot be c hanged without a Logo PIN code. If you w ant to c hange the Logo PIN code loc k set ting, press the SELECT but ton and the Logo PIN code di ...

  • Sanyo PLC-ET30L - page 52

    52 Remote contr ol Remote contr ol The eight dif f erent remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other sev en codes (Code 2 to Code 8). The same code should set on both the projector and the remote control. F or example, operating the projector in “Code 7” , the remote ...

  • Sanyo PLC-ET30L - page 53

    53 P ow er management Time lef t before the lamp is of f . Press the SELECT but ton at P ower management and this dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options. Press the P oint d but ton to select the timer , and then use the P oint 7 8 but tons to set timer . P ower manag ement F or reducing pow er consumptio ...

  • Sanyo PLC-ET30L - page 54

    54 F an contr ol This function is used to set the cooling f ans’ operation to the projector’ s set ting environment. Set this function properly in accordance with the projector ’ s inst allation method. Other wise, the cooling fans will not w ork properly and that causes malfunctions of the projector and decreases the lamp lif e. Slant Select ...

  • Sanyo PLC-ET30L - page 55

    55 Change the PIN code loc k setting Use the P oint 7 8 but tons to switc h bet ween the options. Use the P oint 7 8 but ton to select Off , On1, or On2 and then mov e the pointer to “Quit” with the P oint d but ton. Press the SELECT but ton to close the dialog box. Change the PIN code loc k setting Enter a PIN code PIN code lock This function ...

  • Sanyo PLC-ET30L - page 56

    56 The PIN code can be c hanged to your desired four -digit number . Press the P oint d but tons to select “PIN code c hange ” and press the SELECT but ton. The New PIN code input dialog box appears. Set a ne w PIN code. Change the PIN code Chang e the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUM ...

  • Sanyo PLC-ET30L - page 57

    57 F actory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. Exit the Set ting Menu. Quit Select Factory default and this box appears. Select [Y es], and the next bo x appears. Select [Y es] to activate it. F actor ...

  • Sanyo PLC-ET30L - page 58

    58 T urn of f the projector , and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and ma ...

  • Sanyo PLC-ET30L - page 59

    59 When the projection lamp of the projector reac hes its end of lif e, the Lamp replacement icon appears on the screen and LAMP REPLA CE indicator lights yello w . Replace the lamp with a new one promptly . The timing when the LAMP REPLA CE indicator should light is depending on the lamp mode. F ollow these steps to replace the lamp. ORDER REPLACE ...

  • Sanyo PLC-ET30L - page 60

    60 Be sure to reset the Lamp counter af ter the lamp is replaced. When the Lamp counter is reset, the LAMP REPLA CE indicator stops lighting and the Lamp replacement icon disappears. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons t ...

  • Sanyo PLC-ET30L - page 61

    61 The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the st ate of the W ARNING indicators and the PO WER indicator to t ake proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certain le ...

  • Sanyo PLC-ET30L - page 62

    62 Unplug the A C power cord bef ore cleaning . Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasiv e cleaners, solvents, or other harsh c ...

  • Sanyo PLC-ET30L - page 63

    63 T roubleshooting Bef ore calling your dealer or service center for assistance, c hec k the items below once again. – Make sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–22. – Make sure all equipment is connected to A C outlet and the power is t urned on. – When the projector does not proj ...

  • Sanyo PLC-ET30L - page 64

    64 – Projecting from the e xcessiv e slant angle to the screen may cause ke ystone distortion and partial imperf ect focus. See page 1 8. Pictur e is not br ight enough. – Chec k if "Contrast" or "Brightness" are adjusted properly See page 42. – Chec k if "Image level" is selected properly See page 41 . – Chec ...

  • Sanyo PLC-ET30L - page 65

    65 Appendix This symbol on the nameplate means the product is Listed by Under writers Laboratories Inc. It is designed and manufact ured to meet rigid U.L. saf ety st andards against risk of fire, casualty and electrical hazards. The CE Mark is a Directiv e conformity mark of the European Community (EC). W ARNING : High voltag es are used t o opera ...

  • Sanyo PLC-ET30L - page 66

    66 Menu T ree Dynamic Real Cinema Image 1 Image 2 Image 3 Image V olume Mute Quit On/Of f Sound 0–63 Input Input 3 Auto Go to Syst em (3) Go to Syst em (3) Video Go to Syst em (1) S-video Standard Quit Input 1 Go to Syst em (3) Video Go to Syst em (1) Input 2 RGB Go to Syst em (2) Component Image 4 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB ...

  • Sanyo PLC-ET30L - page 67

    67 Language Set ting 12 languages pro vided Blue/User/Blac k Auto 1 Normal Bac kground Lamp control Quit Capture Logo PIN code c hange Logo PIN code loc k Quit Auto 2 High Quit Auto PC adj. T ot al dots Horizontal V ertical Display area H Display area V Reset PC Adjust Y es/No Clamp Current mode Mode free/Store Quit Fine sync 0–31 Mode 1 H-sync f ...

  • Sanyo PLC-ET30L - page 68

    68 Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red The projector is of f . (The A C power cord is unplugged.) The projector is in stand-by mode. P ress the ON/ST AND-B Y but ton to turn on the projector . The projector is operating normally . The projector is in the P ower management mode. The projector is preparing f or ...

  • Sanyo PLC-ET30L - page 69

    69 * When the projection lamp reac hes its end of life, the LAMP REPLA CE indicator lights yellow . When this indicator lights yello w , replace the projection lamp with a new one promptly . Reset the lamp counter af ter replacing the lamp. See pages 59–60. – – – – W ARNING FIL TER orang e The filter is clogged. Stop using the projector i ...

  • Sanyo PLC-ET30L - page 70

    70 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 1 65 MHz of Dot Cloc k. PC Adjustment is limited when selecting these modes. Appendix ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Freq. (Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x ...

  • Sanyo PLC-ET30L - page 71

    71 When an input signal is digital from the DVI terminal, ref er to the c hart below . PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu. ✔ Note:  • Specificationsaresubjecttoc hangewithoutnotice. Appendix ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Freq. (Hz) D-V GA 640x ...

  • Sanyo PLC-ET30L - page 72

    72 T echnical Specifications Mechanical Inf or mation P rojector T ype Multi-media P rojector Dimensions (W x H x D) 1 3.7” x 6.46” x.1 7 .48” (348.1 mm x 1 64 mm x 444 mm) Net Weight 1 7 .86 lbs (8.1 kg) F eet Adjustment 0˚ to 5.0˚ P anel Resolution LCD P anel System 1 .0” TFT Activ e Matrix type, 3 panels P anel Resolution 1,40 0 x 1,05 ...

  • Sanyo PLC-ET30L - page 73

    73 Model No. Long Zoom Lens : LNS-T1 1 Short Fix ed Lens : LNS-W1 1 Standard Lens : LNS-S1 1 Long Zoom Lens : LNS-T1 0 Short Zoom Lens : LNS-W1 0 PJ-Net Or ganiz er Plus II : PO A-PN03 PJ-Net Or ganiz er Plus IIC : PO A-PN03C The parts listed belo w are optionally available. When ordering those parts, specify the item name and Model No. to the sale ...

  • Sanyo PLC-ET30L - page 74

    74 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Mac hine and Information Sy stem Industries Association). T he projector supports all commands defined by PJLink Class 1 and is v erified conformance with PJLink Standard Class 1 . Projector Input RGB RGB (Scart) RGB (PC Analog) Video Component Auto PJLink Input RG ...

  • Sanyo PLC-ET30L - page 75

    75 T er minal : Mini DIN 8-PIN CONTROL POR T CONNECT OR Vcc - Data + Data Ground 1 2 3 4 2 3 4 1 INPUT 1/ANAL OG OUT T er minal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 Ho ...

  • Sanyo PLC-ET30L - page 76

    76 W rite down the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , cont act the ser vice st ation. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factory set num ...

  • Sanyo PLC-ET30L - page 77

    77 Dimensions 13.7 (348.1) 1.65 (41.9) 5º MAX 7.87 (200) 6.46 (164) 21.09 (535.7) 17.48 (444) 10.85 (275.5) 3.40 (86.4) 11 .10 (282) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) Unit: inc h (mm) Appendix ...

  • Sanyo PLC-ET30L - page 78

    SANY O Electric Co ., Ltd. KF7AL -A ...

Manufacturer Sanyo Category Projector

Documents that we receive from a manufacturer of a Sanyo PLC-ET30L can be divided into several groups. They are, among others:
- Sanyo technical drawings
- PLC-ET30L manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo PLC-ET30L
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo PLC-ET30L.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo PLC-ET30L, service manual, brief instructions and user manuals Sanyo PLC-ET30L. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo PLC-ET30L.

Similar manuals

A complete manual for the device Sanyo PLC-ET30L, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo PLC-ET30L by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo PLC-ET30L.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo PLC-ET30L - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo PLC-ET30L, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo PLC-ET30L, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo PLC-ET30L - which should help us in our first steps of using Sanyo PLC-ET30L
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo PLC-ET30L
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo PLC-ET30L in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo PLC-ET30L?

Use the form below

If you did not solve your problem by using a manual Sanyo PLC-ET30L, ask a question using the form below. If a user had a similar problem with Sanyo PLC-ET30L it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)