Manual Xilinx ML510

43 pages 4.83 mb
Download

Go to site of 43

Summary
  • Xilinx ML510 - page 1

    ML510 QuickStart August 2008 ...

  • Xilinx ML510 - page 2

    Overview • Setup • Boot with ACE-loader ACE File • Observe LCD and Terminal messages • Load new Configuration • Re-load ACE-loader ...

  • Xilinx ML510 - page 3

    ML510 BSB DIMM0 Hardware • The ML510 MicroBlaze design hardware includes: – DDR2 Interface (512 MB) – BRAM – External Memory Controller (EMC) – Networking – UART – Interrupt Controller – GPIO – EEPROM (IIC and SPI) – Timer – System ACE CF Interface – PLB Arbiter Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 4

    ML510 BSB DIMM0 Hardware • The ML510 PPC440 design hardware includes: – DDR2 Interface (512 MB) – BRAM – External Memory Controller (EMC) – Networking – UART – Interrupt Controller – GPIO – EEPROM (IIC and SPI) – Timer – System ACE CF Interface – PLB Arbiter Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 5

    ML510 BSB DIMM1 Hardware • The ML510 MicroBlaze design hardware includes: – DDR2 Interface (512 MB) – BRAM – Networking – UART – Interrupt Controller – Timer – System ACE CF Interface – PLB Arbiter Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 6

    ML510 BSB DIMM1 Hardware • The ML510 PPC440 design hardware includes: – DDR2 Interface (512 MB) – BRAM – External Memory Controller (EMC) – Networking – UART – Interrupt Controller – GPIO – EEPROM (IIC and SPI) – Timer – System ACE CF Interface – PLB Arbiter Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 7

    ML510 Dual Processor Hardware • The ML510 Dual Processor design hardware includes: • PPC440_0: – DDR2 Interface (512 MB) – BRAM (64 KB) – External Memory Controller – Networking – UART – Interrupt Controller – GPIO – EEPROM (IIC and SPI) – System ACE CF Interface – PLB Arbiter • PPC440_1: – DDR2 Interface (512 MB) – BR ...

  • Xilinx ML510 - page 8

    Additional Setup Details • Refer to ml510_overview_setup.ppt for details on: – Software Requirements – ML510 Board Setup • Equipment and Cables • Software • Network – Terminal Programs • This presentation requires the 9600-8-N-1 Baud terminal setup Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 9

    Hardware Setup • Connect the Xilinx Parallel Cable IV (PC4) to the ML510 board • Connect the RS232 null modem cable to the ML510 board Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 10

    Hardware Setup • The ML510 uses a DVI video interface • Connect a DVI monitor or • Use a DVI/VGA adapter to connect a VGA monitor – http://www.belkin.com Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 11

    Hardware Setup • USB Keyboard – www.dell.com Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 12

    Software Setup • Start a Terminal Program for each UART: Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 13

    Factory CompactFlash • The CompactFlash shipped with the ML510 board has the following ace files preloaded: Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 14

    Network Setup • Set PHY0 Jumpers • MII – Connect pins 1 & 2 on J50 and J28 • RGMII – Connect pins 1 & 2 on J50; connect J49 Note: Refer to the ML510 User Guide – UG356 for details ...

  • Xilinx ML510 - page 15

    CompactFlash Setup • Insert the CompactFlash provided with the ML510 fully into the CompactFlash slot on the ML510 board ...

  • Xilinx ML510 - page 16

    Equipment Setup • Set SW3 DIP Switches to 00010101 (1 = ON) • Power-up the ML510 board Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 17

    ACE–Loader • The terminal window also reflects the ACE-loader application • Type the desired number in the terminal window to choose an application • After each demo, push the SysACE reset to return to bootload Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 18

    CF1 – TestApp Peripheral • Type 1, to launch the TestApp Peripheral DIMM0 design – Set jumpers for MII; takes several minutes to complete Note: MicroBlaze DIMM0 Design ...

  • Xilinx ML510 - page 19

    CF2 – VxWorks DIMM0 • Type 2, to launch the VxWorks on the Pcore DIMM0 design Note: PPC440 DIMM0 Design ...

  • Xilinx ML510 - page 20

    CF3 – TestApp Peripheral • Type 3, to launch the TestApp Peripheral DIMM1 design – View on COM2; takes several minutes to complete Note: MicroBlaze DIMM1 Design ...

  • Xilinx ML510 - page 21

    CF4 – VxWorks DIMM1 • Type 4, to launch the VxWorks on the BSB DIMM1 design Note: PPC440 DIMM1 Design ...

  • Xilinx ML510 - page 22

    CF5 – Dual VxWorks • Type 5, to launch the Dual Processor VxWorks design – Set jumpers for RGMII Note: Dual PPC440 Design ...

  • Xilinx ML510 - page 23

    CF6 – My ACE • Type 6, to launch the placeholder design, my_ace – Same message appears on the Monitor Note: PPC440 Pcore DIMM0 Design ...

  • Xilinx ML510 - page 24

    CF7 – Slideshow • Type 7, to launch the slideshow application • The slideshow loads the presentation into memory then presents it Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 25

    Slideshow • The slideshow app will present a series of slides on the Monitor: Note: Presentation applies to the ML510 ...

  • Xilinx ML510 - page 26

    Documentation • Virtex-5 – Silicon Devices http://www.xilinx.com/products/silicon_solutions – Virtex-5 Multi-Platform FPGA http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5 – Virtex-5 Family Overview: LX, LXT, SXT, and FXT Platforms http://www.xilinx.com/support/docum entation/data_sheets/ds100.pdf – Virtex-5 FPGA DC a ...

  • Xilinx ML510 - page 27

    Documentation • Virtex-5 – Virtex-5 FPGA User Guide http://www.xilinx.com/support/docum entation/user_guides/ug190.pdf – Virtex-5 FPGA Configuration User Guide http://www.xilinx.com/support/docum entation/user_guides/ug191.pdf – Virtex-5 System Monitor User Guide http://www.xilinx.com/support/docum entation/user_guides/ug192.pdf – Virtex- ...

  • Xilinx ML510 - page 28

    Documentation • Virtex-5 RocketIO – RocketIO GTP Transceivers http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5/ capabilities/RocketIO_GTP.htm – RocketIO GTX Transceivers http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5/ capabilities/RocketIO_GTX.htm – RocketIO GTP Transceiver User Guide – UG196 ht ...

  • Xilinx ML510 - page 29

    Documentation • Design Resources – ISE Development Tools and IP http://www.xilinx.com/ise – Integrated Software Environment (ISE) Foundation Resources http://www.xilinx.com/ise/logic_design_prod/foundation.htm – ISE Manuals http://www.xilinx.com/support/software_manuals.htm – ISE Development System Reference Guide http://toolbox.xilinx.co ...

  • Xilinx ML510 - page 30

    Documentation • Additional Design Resources – Customer Support http://www.xilinx.com/support – Xilinx Design Services: http://www.xilinx.com/xds – Titanium Dedicated Engineering: http://www.xilinx.com/titanium – Education Services: http://www.xilinx.com/education – Xilinx On Board (Board and kit locator): http://www.xilinx.com/xob ...

  • Xilinx ML510 - page 31

    Documentation • Platform Studio – Embedded Development Kit (EDK) Resources http://www.xilinx.com/edk – Embedded System Tools Reference Manual http://www.xilinx.com/support/documen tation/sw_manuals/edk10_est_rm.pdf – EDK Concepts, Tools, and Techniques http://www.xilinx.com/support/docum entation/sw_manuals/edk_ctt.pdf ...

  • Xilinx ML510 - page 32

    Documentation • PowerPC 440 – PowerPC 440 Processor http://www.xilinx.com/powerpc – Embedded Processor Block in Virtex-5 FPGAs Reference Guide – UG200 http://www.xilinx.com/support/docum entation/user_guides/ug200.pdf – PPC440 Virtex-5 Wrapper – DS621 http://www.xilinx.com/support/documentation/ip_documentation/ ppc440_virtex5.pdf – D ...

  • Xilinx ML510 - page 33

    Documentation • MicroBlaze – MicroBlaze Processor http://www.xilinx.com/microblaze – MicroBlaze Processor Reference Guide – UG081 http://www.xilinx.com/support/documentation/sw_manuals/mb_ref_guide.pdf ...

  • Xilinx ML510 - page 34

    Documentation • Memory Solutions – Demos on Demand – Memory Interface Solutions with Xilinx FPGAs http://www.demosondemand.com/clients/xilinx/001/page_new2/index.asp#35 – Xilinx Memory Corner http://www.xilinx.com/products/design_resources/mem_corner – Additional Memory Resources http://www.xilinx.com/support/software/memory/protected/ind ...

  • Xilinx ML510 - page 35

    Documentation • ChipScope Pro – ChipScope Pro 10.1i Serial IO Toolkit User Manual http://www.xilinx.com/ise/verification/chipscope_pro_siotk_10_1_ug213.pdf – ChipScope Pro 10.1i ChipScope Pro Software and Cores User Guide http://www.xilinx.com/ise/verifica tion/chipscope_pro_sw_cores_10_1_ug029.pdf ...

  • Xilinx ML510 - page 36

    Documentation • Ethernet – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Data Sheet http://www.xilinx.com/support/documentation/ip_documentation/ v5_emac_ds550.pdf – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Getting Started Guide http://www.xilinx.com/support/documentation/ip_documentation/ v5_emac_gsg340.pdf – Virtex-5 Tri-Mode Eth ...

  • Xilinx ML510 - page 37

    Documentation • PLB v4.6 IP – Processor Local Bus (PLB) v4.6 Data Sheet – DS531 http://www.xilinx.com/support/documen tation/ip_documentation/plb_v46.pdf – Multi-Port Memory Controller (MPMC) – DS643 http://www.xilinx.com/support/documen tation/ip_documentation/mpmc.pdf – XPS Multi-CHannel External Memory Controller (XPS MCH EMC) – DS ...

  • Xilinx ML510 - page 38

    Documentation • PLB v4.6 IP – XPS IIC Bus Interface – DS606 http://www.xilinx.com/support/documentation/ip_documentation/xps_iic.pdf – XPS SYSACE (System ACE) Interface Controller – DS583 http://www.xilinx.com/support/documenta tion/ip_documentation/xps_sysace.pdf – XPS Timer/Counter – DS573 http://www.xilinx.com/support/documentation ...

  • Xilinx ML510 - page 39

    Documentation • PLB v4.6 IP – XPS General Purpose Input/Output (GPIO) – DS569 http://www.xilinx.com/support/documenta tion/ip_documentation/xps_gpio.pdf – XPS External Peripheral Controller (EPC) – DS581 http://www.xilinx.com/support/documentation/ip_documentation/xps_epc.pdf – XPS 16550 UART – DS577 http://www.xilinx.com/support/docu ...

  • Xilinx ML510 - page 40

    Documentation • IP – Local Memory Bus Data Sheet – DS445 http://www.xilinx.com/support/documen tation/ip_documentation/lmb_v10.pdf – Block RAM Block Data Sheet – DS444 http://www.xilinx.com/support/documentation/ip_documentation/bram_block.pdf – Microprocessor Debug Module Data Sheet – DS641 http://www.xilinx.com/support/documen tatio ...

  • Xilinx ML510 - page 41

    Documentation • IP – JTAGPPC Controller Data Sheet – DS298 http://www.xilinx.com/support/documenta tion/ip_documentation/jtagppc_cntlr.pdf – Processor System Reset Module Data Sheet – DS402 http://www.xilinx.com/support/documentation/ip_documentation/ proc_sys_reset.pdf – Clock Generator v2.0 Data Sheet – DS614 http://www.xilinx.com/s ...

  • Xilinx ML510 - page 42

    Documentation • ML510 – ML510 Overview http://www.xilinx.com/ml510 – ML510 Evaluation Platform User Guide – UG356 http://www.xilinx.com/support/doc umentation/boards_and_kits/ug356.pdf – ML510 Reference Design User Guide – UG355 http://www.xilinx.com/support/doc umentation/boards_and_kits/ug355.pdf – ML510 Quickstart Tutorial http://w ...

  • Xilinx ML510 - page 43

    Documentation • ML510 – ML510 Schematics http://www.xilinx.com/support/d ocumentation/boards_and_kits/ ml510_schematics.pdf – ML510 Bill of Material http://www.xilinx.com/support/docum entation/boards_and_kits/ml510_bom.xls ...

Manufacturer Xilinx Category Computer Hardware

Documents that we receive from a manufacturer of a Xilinx ML510 can be divided into several groups. They are, among others:
- Xilinx technical drawings
- ML510 manuals
- Xilinx product data sheets
- information booklets
- or energy labels Xilinx ML510
All of them are important, but the most important information from the point of view of use of the device are in the user manual Xilinx ML510.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Xilinx ML510, service manual, brief instructions and user manuals Xilinx ML510. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Xilinx ML510.

Similar manuals

A complete manual for the device Xilinx ML510, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Xilinx ML510 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Xilinx ML510.

A complete Xilinx manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Xilinx ML510 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Xilinx ML510, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Xilinx ML510, that we can find in the current document
3. Tips how to use the basic functions of the device Xilinx ML510 - which should help us in our first steps of using Xilinx ML510
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Xilinx ML510
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Xilinx ML510 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Xilinx ML510?

Use the form below

If you did not solve your problem by using a manual Xilinx ML510, ask a question using the form below. If a user had a similar problem with Xilinx ML510 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)