English dropdown-ico

Manual Dyna-Glo RMC-KFA210T

28 pages 1.38 mb
Download

Go to site of 28

Summary
  • Dyna-Glo RMC-KFA210T - page 1

    CFM RMC INTERNA TIONAL 3501 W . HOW ARD ST ., SKOKIE, IL 60076 1-800-527-4948 POR T ABLE FORCED AIR HEA TERS “USER’S MANUAL” Before the first use of this heater , please read this USER’S MANUAL very carefully . This USER’S MANUAL has been designed to instruct you as to the proper manner in which to assemble, maintain, store, and most impo ...

  • Dyna-Glo RMC-KFA210T - page 2

    1 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! DANGER - IMPROPER USE OF THIS HEATER CAN RESULT IN SERIOUS INJURY OR DEATH FROM BURNS, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR CARBON MONOXIDE POISONING. W ARNINGS: 1. RISK OF INDOOR AIR POLLUTION! • Use this heater only in well ventilated areas. Provide at least a three-square foot (2,800 sq ...

  • Dyna-Glo RMC-KFA210T - page 3

    2 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! ITEM P AGE # PRECAUTIONS - SAFETY GUIDE 1 1. INTRODUCTION 2 2. FEA TURES 2 3. UNP ACKING AND ASSEMBL Y 4 4. KEROSENE (1-K OR NO. 1 FUEL OIL) 6 5. OVER VIEW OF HEA TER DESIGN 7 6. FUELING YOUR HEA TER 8 7. OPERA TION 8 8. LONG TERM STORAGE OF YOUR HEA TER 9 9. MAINTENANCE 9 10. TROUBLE SHOOTING G ...

  • Dyna-Glo RMC-KFA210T - page 4

    3 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! Figure 2. RMC-KFA120T / RMC-KFA170T MODELS Figure 2. RMC-KFA210T MODEL Hot Air Outlet Handle Upper Shell Lower Shell Fuel Gauge Side Cover Power/Reset Switch Upper Shell Fan Guard Power Cord Fuel T ank Fuel Cap Thermostat Knob Lamp Hot Air Outlet Handle Upper Shell Lower Shell Fuel Gauge Side Co ...

  • Dyna-Glo RMC-KFA210T - page 5

    4 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! Figure 5. RMC-KFA120T / RMC-KFA170T / RMC-KFA210T MODELS Handle Screws Wheels Split pin And Flat W asher Screws And Nuts Handle Wheel Support Frame Axle 3. UNP ACKING AND ASSEMBL Y 1. REMOVE THE HEATER AND ALL PACKING MATERIALS FROM THE BOX. (Fig. 4 and 5) NOTE: Save the shipping carton and pack ...

  • Dyna-Glo RMC-KFA210T - page 6

    5 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 2. ASSEMBLY A. For RMC-KFA45T/RMC-KFA65T Models only (Figure 6) Tools Required • Medium Phillips Screwdriver 1. Align the holes on the upper shell with the 2 mounting holes on the handle as shown in Figure 6. 2. Secure each hole with a screw. B. For RMC-KFA120T / RMC-KFA170T / RMC-KFA210T Mode ...

  • Dyna-Glo RMC-KFA210T - page 7

    6 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! Screw Air Inlet Axle Split pin Flat W asher Wheel Nut Wheel Support Frame Fuel T ank Flange Hot Air Outlet Handle Extended Hub 4. KEROSENE (1-K) It is EXTREMELY IMPORTANT for the proper operation of this heater that you use the correct grade of kerosene. The correct grade of kerosene is identifi ...

  • Dyna-Glo RMC-KFA210T - page 8

    7 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 5. OVER VIEW OF HEA TERS DESIGN Fuel System: This heater is equipped with an electric air pump that forces air through the air line connected to the fuel intake and then through a nozzle in the burner head. When the air passes in front of the fuel intake it causes fuel to rise from the tank and ...

  • Dyna-Glo RMC-KFA210T - page 9

    8 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 6. FUELING YOUR HEA TER NEVER FILL THE HEATER FUEL TANK IN THE LIVING SPACE: FILL THE TANK OUTDOORS. DO NOT OVERFILL YOUR HEATER AND BE SURE HEATER IS LEVELED. IMPORTANT NOTICE REGARDING FIRST IGNITION OF HEATER: The first time you light the heater, it should be done outdoors . This allows the o ...

  • Dyna-Glo RMC-KFA210T - page 10

    9 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! Figure 10 TO STOP HEATER 1. Turn switch to “OFF” and unplug power cord. TO RESTART HEATER 1.Wait 10 seconds after stopping heater. 2. Repeat steps under to start heater . 8. LONG TERM ST ORAGE OF YOUR HEA TER 1. Drain fuel tank through fuel cap opening. 2. Using a small amount of kerosene, s ...

  • Dyna-Glo RMC-KFA210T - page 11

    C.) AIR OUTPUT FIL TER, LINT FIL TER REPLACE EVERY 500 HOURS OF OPERATION OR ONCE A YEAR. - Remove upper shell and fan guard (See page 9). - Remove end filter cover screws using medium phillips screwdriver. - Remove end filter cover. - Replace air output and lint filter. - Reinstall end filter cover. - Reinstall fan guard and upper shell. D.) F AN ...

  • Dyna-Glo RMC-KFA210T - page 12

    11 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! Figure 15. Figure 14. F .) SP ARK PLUG CLEAN AND REGAP EVERY 600 HOURS OPERATION OR REPLACE AS NEEDED. (For RMC-KFA 45T/65T/120T/170T Models Only) - Remove upper shell (See page 9). - Remove fan (See page 10). - Remove ignitor wire from spark plug. - Remove spark plug from burner head using med ...

  • Dyna-Glo RMC-KFA210T - page 13

    12 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! (For RMC-KFA 210T Models Only) - Remove upper shell (See page 9). - Remove fan (See page 10). - Remove ignitor wire from spark plug. - Remove spark plug from bracket-spark using medium phillips screwdriver. - Clean and regap spark plug electrodes to 3.5mm gap.(0.138 " ) - ReInstall spark p ...

  • Dyna-Glo RMC-KFA210T - page 14

    13 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! H .) FUEL FIL TER CLEAN OR REPLACE TWICE A HEATING SEASON OR AS NEEDED. (For RMC-KFA 45T/65T/120T/170T Models Only) - Remove side cover screws using medium phillips screwdriver. - Remove side cover. - Pull fuel line off fuel filter neck. - Turn fuel filter 90 。 to counter clockwise and pull t ...

  • Dyna-Glo RMC-KFA210T - page 15

    14 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! I) FUEL VALVE ( For RMC-KFA210T Model only) - Remove side cover screws using medium phillips screwdriver (See page 13). - Remove upper shell (See page 9). - Remove fan (See page 10). - Pull fuel line (lower and upper) off the fuel valve fittings (See figure 21). - Disconnet red and orange wires ...

  • Dyna-Glo RMC-KFA210T - page 16

    15 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! I .) PUMP PRESSURE ADJUSTMENT - Remove pressure gauge plug from end filter cover. - Install accessory pressure gauge. - Start heater (See Operation, page 8) Allow motor to reach full speed - Adjust pressure (Using a flat blade screwdriver) Turn relief valve to right to increase pressure. Turn r ...

  • Dyna-Glo RMC-KFA210T - page 17

    16 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 10 . TROUBLE SHOOTING GUIDE Heater ignites but MAIN PCB 1. Wrong pump pressure 1. See Pump Pressure Adjustment, assembly shuts heater off after page 15. a short period of time. 2. Dirty Air Output, Air Intake 2. See Air Output, Air intake (Lamp is flickering) and Lint Filter and Lint Filters, p ...

  • Dyna-Glo RMC-KFA210T - page 18

    17 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 11 . WIRING DIAGRAM A) WIRING DIAGRAM (RMC-KFA45T / RMC-KFA65T) B) WIRING DIAGRAM (RMC-KFA120T) ...

  • Dyna-Glo RMC-KFA210T - page 19

    18 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 11 . WIRING DIAGRAM C) WIRING DIAGRAM (RMC-KFA170T) D) WIRING DIAGRAM (RMC-KFA210T) ...

  • Dyna-Glo RMC-KFA210T - page 20

    19 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 12 . SPECIFICA TIONS RMC-KFA45T / RMC-KFA65T RMC-KFA120T / RMC-KFA170T / RMC-KFA210T 24.75" 39" 20.5" KF A120T KF A170T KF A210T 23" 19" 33.5" H D W MODEL RMC-KFA45T RMC-KFA65T RMC-KFA120T RMC-KFA170T RMC-KFA210T BTU/Hr . 45,000 65,000 120,000 170,000 210,000 Fuel ...

  • Dyna-Glo RMC-KFA210T - page 21

    NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 13 . EXPLODED P AR TS DRA WING (RMC-KF A45T/65T/120T/170T Models Only) NOTE: SPECIFY MODEL NUMBER AND PART NUMBER WHEN ORDERING PARTS. 32 33 16 15 25 23 24 30 22 18 28 31 3 20 15 19 21 14 26 23-1 11 12 13 2 4 1 6 27 5 29 8 9 10 7 17-7 17-8 17-5 17-6 17-3 17-9 17-10 17-4 17-2 17-1 22-11 22-15 22-18 ...

  • Dyna-Glo RMC-KFA210T - page 22

    21 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 13 . EXPLODED P AR TS DRA WING (RMC-KF A 210T Model Only) 34 35 Fuel Valve Assembly 17 31 32 27 28 24 27-1 25 21 18 26 21 23 14-4 14-2 14-5 14-1 14-3 19 13 12 22 29 33 3 16 20 15 11 2 4 1 6 5 30 14 8 9 10 7 18-3 18-1 18-12 18-7 18-13 18-6 18-5 18-8 18-4 18-9 18-10 18-11 23-11 23-19 23-18 23-13 ...

  • Dyna-Glo RMC-KFA210T - page 23

    22 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 14 . P AR TS LIST (RMC-KF A 45T/65T/120T/170T Models Only) KEY NO. DESCRIPTION PART NO. RMC-KFA45T RMC-KFA65T RMC-KFA120T RMC-KFA170T 1 Fuel Tank Assembly 2151-0005-00 2151-0005-00 2151-0002-00 2151-0001-00 2 Fuel Gauge 2156-0005-00 2156-0005-00 2156-0001-00 2156-0001-00 3 Fuel Filter Assembly ...

  • Dyna-Glo RMC-KFA210T - page 24

    KEY NO. DESCRIPTION PART NO. RMC-KFA45T RMC-KFA65T RMC-KFA120T RMC-KFA170T 22-6 Rotor Kit FA1000 FA1000 FA1000 FA1000 22-7 Blade See 22-6 See 22-6 See 22-6 See 22-6 22-8 End Pump Cover 3531-0008-00 3531-0008-00 3531-0008-00 3531-0008-00 22-9 Nipple 3541-0039-00 3541-0039-00 3541-0020-00 3541-0020-00 22-10 Flange Bolt 4329-0014-00 4329-0014-00 4329- ...

  • Dyna-Glo RMC-KFA210T - page 25

    24 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 14 . P AR TS LIST (RMC-KF A 210T Model Only) KEY No. P AR T No. RMC-KF A210T DESCRIPTION 2151-0001-00 2156-0001-00 2155-0001-00 2151-0003-00 3980-0031-00 3712-0011-00 39A0-0044-00 215A-0005-00 3713-0045-00 3231-0072-00 3111-0123-00 3712-0004-00 3712-0035-00 2154-0015-00 39A0-0055-00 3541-0020-0 ...

  • Dyna-Glo RMC-KFA210T - page 26

    25 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! ACCESSORIES Air Pressure Gauge F A1010 (all models) Thermostat F A1012 (all models) FOR TECHNICAL ASSIST ANCE SEE YOUR LOCAL RET AILER OR CONT ACT US A T : Phone: 1-800-527-4948 KEY No. P AR T No. RMC-KF A210T DESCRIPTION 3970-0060-00 3121-0258-00 3121-0257-00 3541-0050-00 4321-0180-00 See 23-7 ...

  • Dyna-Glo RMC-KFA210T - page 27

    1 2 1 2 3 5 9 6 7 8 4 NEVER LEA VE THE HEA TER UNA TTENDED WHILE BURNING! 14 . P AR TS LIST (WHEELS AND HANDLE) 1) RMC-KF A45T/65T MODELS 2) RMC-KF A120T/170T/210T MODEL KEY NO. DESCRIPTION PART NO. RMC-KFA45T RMC-KFA65T QTY 1 Handle 3231-0073-00 3231-0073-00 1 2 Screw 4319-0015-00 4319-0015-00 2 KEY NO. DESCRIPTION PART NO. MC-KFA120T MC-KFA170T M ...

  • Dyna-Glo RMC-KFA210T - page 28

    4221 - 0059- 00 07/03 Rev. 00 EDITION 2003 ...

Manufacturer Dyna-Glo Category Electric Heater

Documents that we receive from a manufacturer of a Dyna-Glo RMC-KFA210T can be divided into several groups. They are, among others:
- Dyna-Glo technical drawings
- RMC-KFA210T manuals
- Dyna-Glo product data sheets
- information booklets
- or energy labels Dyna-Glo RMC-KFA210T
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dyna-Glo RMC-KFA210T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dyna-Glo RMC-KFA210T, service manual, brief instructions and user manuals Dyna-Glo RMC-KFA210T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dyna-Glo RMC-KFA210T.

Similar manuals

A complete manual for the device Dyna-Glo RMC-KFA210T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dyna-Glo RMC-KFA210T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dyna-Glo RMC-KFA210T.

A complete Dyna-Glo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dyna-Glo RMC-KFA210T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dyna-Glo RMC-KFA210T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dyna-Glo RMC-KFA210T, that we can find in the current document
3. Tips how to use the basic functions of the device Dyna-Glo RMC-KFA210T - which should help us in our first steps of using Dyna-Glo RMC-KFA210T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dyna-Glo RMC-KFA210T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dyna-Glo RMC-KFA210T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dyna-Glo RMC-KFA210T?

Use the form below

If you did not solve your problem by using a manual Dyna-Glo RMC-KFA210T, ask a question using the form below. If a user had a similar problem with Dyna-Glo RMC-KFA210T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)