English dropdown-ico

Manual Optoma EW675UTis

89 pages Not applicable
Download

Go to site of 89

Summary
  • Optoma EW675UTis - page 1

    1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings ..........................5 Product Features ................................5 Introduction .................... ...

  • Optoma EW675UTis - page 2

    2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq ...

  • Optoma EW675UTis - page 3

    3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user ’s guide. ▀ ■ W arning- Do not look into the projector ’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ W arning- T o reduce the risk of re or electric shock, do not expose this projec ...

  • Optoma EW675UTis - page 4

    4 English Usage Notice Do:    T urn off and unplug the power plug from the AC outlet before cleaning the product.    Use a soft dry cloth with mild detergent to clean the display housing.    Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not:    Block the s ...

  • Optoma EW675UTis - page 5

    5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, us ...

  • Optoma EW675UTis - page 6

    6 English Introduction Documentation :  User ’s Manual  W arranty Card  Quick Start Card  WEEE Card (for EMEA only)  Due to different applications in each country , some regions may have different accessories. Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts ...

  • Optoma EW675UTis - page 7

    7 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT RJ-45 USB / DISPLAY SERVICE PB/MOUSE HDMI Product Overview 1. Control Panel 2. IR Receivers 3. Cable Cover 4. Speaker 5. T ilt-Adjustment Feet 6. Mirror Cover 7. Input / Output Connect ...

  • Optoma EW675UTis - page 8

    8 English Introduction 9 3 4 1 6 1. Lamp LED 2. T emp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu Control Panel 10 7 5 2 8 ...

  • Optoma EW675UTis - page 9

    9 English Introduction RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT RJ-45 USB / DISPLAY SERVICE PB/MOUSE HDMI Input/Output Connections 1. 12V T rigger Relay (12V , 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3. 3pin Mini-din RS232 4. Composite ...

  • Optoma EW675UTis - page 10

    10 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 8. V olume +/- 9. 3D 10. A V mute 1 1. Video 12. PC/Mouse control 13. Mouse Left Click 14. Enter/Help 15. Source 16. Keystone +/- 17. Menu 18. Brightness 19. HDMI 20. S-Video 21. Numbered ke ...

  • Optoma EW675UTis - page 11

    11 English Introduction 6 1. Battery Cover 2. Mouse Right Click 3. Menu 4. Mouse Left Click Interactive Pen 5 1 8 7 4 3 2 Battery Installation: 1. Press rmly and slide the battery cover off. 1 2. Install new batteries (AAA). Ensure that you have the batter - ies’ polarity (+/–) aligned correctly . 2 3. Slip the cover back over the batteries ...

  • Optoma EW675UTis - page 12

    12 English Installation Removing and Attaching the Cable Cover Connecting the Projector 1 2 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover . 1 2. Lift up and remove the cable cover . 2 Install the cable cover by reversing the previous steps. Cable Cover ...

  • Optoma EW675UTis - page 13

    13 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT RJ-45 USB / DISPLAY SERVICE PB/MOUSE HDMI m o l e x MOLEX MOLEX mo lex E62405SP R Connect to Computer/Notebook 1 2 4 5 1............................................................... ...

  • Optoma EW675UTis - page 14

    14 English Installation RS-232 S-VIDEO VIDEO AUDIO1-IN AUDIO OUT (VGA1/VGA2) 12V OUT MIC L R AUDIO2-IN (S-VIDEO/VIDEO) VGA1-IN / SCART / YPbPr VGA2-IN / YPbPr VGA-OUT RJ-45 USB / DISPLAY SERVICE PB/MOUSE HDMI E62405SP R Connect to Video Sources 1................................................................................. *Audio Cable RCA/RCA 2 ...

  • Optoma EW675UTis - page 15

    15 English Installation or Powering the projector On / Off  Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Securely connect the pow er cord and signal cable. When connected, the POWER/ST ANDBY LED will turn Amber . 2. T urn on the lamp by pressing “ ” button either on the top of the projector ...

  • Optoma EW675UTis - page 16

    16 English Installation  Contact the nearest service center if the projector displays these symptoms. See pages 87-88 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP” LED indicator is lit red and if “ POWER/ST ANDBY ” indicator ashes ambe ...

  • Optoma EW675UTis - page 17

    17 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height T ilt-Adjustment Feet T ilt-Adjustment Ring The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the adjustable ring clockwise to raise the ...

  • Optoma EW675UTis - page 18

    18 English Installation Adjusting the Projector ’ s Focus T o focus the image, rotate the focus ring until the image is clear .  XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm).  WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 mm). FO CU S Focus Ring Adjusting Pr ...

  • Optoma EW675UTis - page 19

    19 English Installation Screen Size (B) (C) (D) (E) (α) Diagonal Width (W) Height (H) inch mm inch mm inch mm inch mm inch mm inch mm inch mm degree 77 1956 65 1659 41 1037 31 777 6 153 10 259 19 495 55.3 80 2032 68 1723 42 1077 32 808 7 174 11 269 20 516 55.3 85 2159 72 1831 45 1 144 34 858 8 214 11 286 22 568 55.3 87.2 2215 74 1878 46 1 174 35 8 ...

  • Optoma EW675UTis - page 20

    20 English User Controls Using the Control Panel Power/ Standby but - ton and LED Refer to the “Power On/Off the Projector” section on pages 15-16. Indicate the projector ’s status. RE-SYNC Automatically synchronize the projector to the input source. Enter Conrm your item selection. SOURCE Press “SOURCE” to select an input signal. Menu ...

  • Optoma EW675UTis - page 21

    21 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 15-16. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down. Enter / Help Conrm your item selection. Help Menu (refer to page 23). Source Pr ...

  • Optoma EW675UTis - page 22

    22 English User Controls Using the Remote Control A V mute Momentarily turns off/on the audio and video. S-Video Press “ S-Video ” to choose S-V ideo source. VGA Press “VGA” to choose VGA sources. Video Press “Video” to choose Composite video source. Interactive Pen Using the Interactive Pen ON/OFF Power On/Off the Interactive Pen. LED ...

  • Optoma EW675UTis - page 23

    23 English User Controls Using the HELP button The HELP function ensures easy setup and operation.  Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu. ...

  • Optoma EW675UTis - page 24

    24 English User Controls  Help menu button functions only when no input source is detected.  If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems.  Please refer to the “T roubleshooting” section on pages 70-75 for more details. ...

  • Optoma EW675UTis - page 25

    25 English User Controls ...

  • Optoma EW675UTis - page 26

    26 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selectio ...

  • Optoma EW675UTis - page 27

    27 English User Controls Menu T ree EX665UTi OSD Menu Tree.xls Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma Film / Video / Graphics / PC BrilliantColor™ 0~10 Color Temp. Warm / Medium / Cold Color Settings Color Space AUTO / RGB / YUV Input Source VGA1 / VG ...

  • Optoma EW675UTis - page 28

    28 English User Controls EX665UTi OSD Menu Tree.xls Main Menu Sub Menu Settings Setup Projector ID 0~99 Mute On / Off Volume 0~10 Audio Input Advanced Logo Optoma / Neutral / User Logo Capture Closed Captioning Off / CC1 / CC2 Exit Network Network State DHCP IP Address Subnet mask Gateway DNS Apply Yes / No Exit Options Source Lock On / Off High Al ...

  • Optoma EW675UTis - page 29

    29 English User Controls  Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using.  ( #1 ) “Color” and “T int” are only supported in Video mode.  ( #2 ) For XGA model only .  ( #3 ) For WXGA model only . 16:9 or 16:10 depend on “Screen T yp ...

  • Optoma EW675UTis - page 30

    30 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color .  Blackboard: This mode should be selected to achieve optim ...

  • Optoma EW675UTis - page 31

    31 English User Controls Sharpness Adjust the sharpness of the image.  Press the to decrease the sharpness.  Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color .  Press the to decrease the amount of saturation in the image.  Press the to increase the amount of saturation in the ...

  • Optoma EW675UTis - page 32

    32 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater .  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a ne ...

  • Optoma EW675UTis - page 33

    33 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB or YUV . Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs that are not selected. Image AI I ...

  • Optoma EW675UTis - page 34

    34 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. XGA  4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV . (576i/p)  16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide scre ...

  • Optoma EW675UTis - page 35

    35 English User Controls WXGA  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  16:10: This format is for 16×10 input sources, like widescreen laptops.  LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens t ...

  • Optoma EW675UTis - page 36

    36 English User Controls  Each I/O has different setting of “Edge mask”.  “Edge mask” and “Zoom” can’t work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Pr ...

  • Optoma EW675UTis - page 37

    37 English User Controls 3D  Off: Select “Of f” to turn 3D settings off for 3D images.  DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images.  IR: Select “IR” to use optimized settings for IR-based 3D images. 3D Sync. Invert  Press the “On” to invert left and right frame contents.  Press the ? ...

  • Optoma EW675UTis - page 38

    38 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Screen T ype Choose the screen type from16:10 or 16:9. Projection  Front-Desktop This is the default selection. The image is projected straig ...

  • Optoma EW675UTis - page 39

    39 English User Controls  Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID denition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 81~85 for the complete list of RS232 com ...

  • Optoma EW675UTis - page 40

    40 English User Controls SETUP V olume  Press the to decrease the volume.  Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector . Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than one video source. ? ...

  • Optoma EW675UTis - page 41

    41 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Sync ...

  • Optoma EW675UTis - page 42

    42 English User Controls SETUP | Security Security  On: Choose “On” to use security verication when the turning on the projector .  Off: Choose “Of f” to be able to switch on the projector without password verication. Security T imer Use thi s func tio n to set the how l ong (M onth /Day/H our) the proj ecto r can b e used. On c ...

  • Optoma EW675UTis - page 43

    43 English User Controls  If the i nco rre ct pas sword is e ntered 3 tim es, th e proje ctor w ill automat ica lly shut dow n.  If you have forgotten your password, please contact your local ofce for support. ...

  • Optoma EW675UTis - page 44

    44 English User Controls SETUP | Advanced Logo Use thi s func tio n to set the de sired st ar tup s cree n. If chan ges ar e made t hey will ta ke effe ct the n ext tim e the pr ojec tor is powe red on.  Optoma: The default startup screen.  Neutral: Logo is not displayed on startup screen.  User: Use stored picture from “Logo Capture” ...

  • Optoma EW675UTis - page 45

    45 English User Controls SETUP | Network Network State Display the network connection status. DHCP Use this function to select your desired startup screen. If you change the setting from one to another , when you exit the OSD menu, the new setting will take effect on next open.  On: Assign an IP address to the projector from an external DHCP ser ...

  • Optoma EW675UTis - page 46

    46 English User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP , or manually enter the required network information. 2. Then choose apply and press “ ” button to complete the conguration process. 3. Open your web browse r and type in from the OSD LAN screen then the web page will display as below: How to use ...

  • Optoma EW675UTis - page 47

    47 English User Controls When making a direct connection from your computer to the projector Ste p 1: Find an IP Address (192.168.0.100) from LAN function of projector . Step 2: Select apply and press “ Enter” button to submit function or press “ menu ” key to exit. Step 3: T o open Network Connections, click Start , click Control Panel , c ...

  • Optoma EW675UTis - page 48

    48 English User Controls Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector , including projector ’s online status, system power , lamp life, network setting an ...

  • Optoma EW675UTis - page 49

    49 English User Controls 3. Edit Attribute 4. Edit Event For more information, please visit http://www .crestron.com & www .crestron.com/getroomview . ...

  • Optoma EW675UTis - page 50

    50 English User Controls Source Lock  On: The projector will only search current input connection.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster . This feature is useful in high altitude areas where the air is thin. Information Hide  ...

  • Optoma EW675UTis - page 51

    51 English User Controls Reset Dust Filter Choose “Y es” to show or “No” to hide the warning message when the changing lter message is displayed. Reset Choose “Y es” to return the display parameters on all menus to the factory default settings. ...

  • Optoma EW675UTis - page 52

    52 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Auto Power Off (min) Sets the countdown timer interval. The countdown timer will sta ...

  • Optoma EW675UTis - page 53

    53 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD: Choose “STD” to dim the projector lamp whi ...

  • Optoma EW675UTis - page 54

    54 English User Controls OPTIONS | Point Blank Interactive Choose “On” to enable Interactive and activate the Interactive menu. Pointer Motion Choose this function to select the Pointer Motion mode: “ Normal ”, “ Draw ”, and “Stable”.  Normal: In this mode, press Mouse Left Click button of the interactive pen can hold the positio ...

  • Optoma EW675UTis - page 55

    55 English User Controls  Pointer Motion: Function as toggling among “Normal”, “Draw”, and “Stable” mode  PowerPoint Annotation: Function as annotating in the Power - Point slide show .  Switch Windows (Alt+T ab): Function as toggling among windows,acting as the keyboard shortcut Alt+T ab.  Esc : Function as the keyboard Esc ...

  • Optoma EW675UTis - page 56

    56 English User Controls Ruby is a embedded project which can bring the high perfor- mance in network projection. Base on network protocol, user can congure the projector remotely . It supports to connect the PC with Projector by USB, Ethernet, and Wireless. This project makes full use of the network capability . It allows the admin- istrator to ...

  • Optoma EW675UTis - page 57

    57 English User Controls 2 There are 3 options in this page. • Click “Download”, it displays the interface to download the soft - ware of “Optoma Presenter”. • Click “Crestron”, to enter the control page of Flash UI. • Click “Admin”, the log-in page shows up. 3. Enter the password and click [Login] button, and then main page i ...

  • Optoma EW675UTis - page 58

    58 English User Controls Alert Setup This page is to set up the alert notication for kinds of error types by sending mail. Alert type is multi-options. SMTP Mail Setup This page is to set up the details of mail sending, ex. mail server IP address, user name, password and mail address of receivers. (Note: Multi-receivers are separated by semicolo ...

  • Optoma EW675UTis - page 59

    59 English User Controls • IP Setup: Click “Obtain an IP address automatically” as auto mode; click “Use the following IP Address” as static mode, IP Ad - dress/Subnet Mask/Default Gateway/ DNS Server are required to be lled and then click “Apply” button. • DHCP Server Setup: Enable/Disable, Start IP , End IP , Subnet Mask, Defau ...

  • Optoma EW675UTis - page 60

    60 English User Controls Click the following icons under “Play Control” • : Click to disconnect host PC. • : Click to switch session to background. • : Click to change display region. Crestron RoomView This is the control page of Flash UI. Click “Power” to control power on/off of projector . Click “V ol-, Mute, V ol+” to control v ...

  • Optoma EW675UTis - page 61

    61 English User Controls Click “T ools”, the following items are included: • Crestron Control: the basic network information of the control system device. • Projector: the ID of each projector in a building for Administrator to control. • User Password: change user ’s password. • Default Language: set the default language. • DHCP: e ...

  • Optoma EW675UTis - page 62

    62 English User Controls Click “Help” to inform administrator to do related protection or operation. Reset to Default Click “Apply” to reset system to the default settings. Click “Flash Upgrade” to upgrade the Firmware from USB disk, which has been inserted in projector . Reboot System Click “Reboot” to reboot system. ...

  • Optoma EW675UTis - page 63

    63 English User Controls How to use the Card Reader The Card Reader application can display packaged images in a USB ash device. 1. Plugging the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed. It supports 3 USB devices at the same time. 2. Press “Enter” to en ...

  • Optoma EW675UTis - page 64

    64 English User Controls • File Name On/OFF: Enable/Disable le name display in Thumb - nail Display Mode. Press Up/Down/Left/Right key to choose different functions. 3. In the menu of Thumbnail mode, choose Display function, or choose le and press “Enter” to enter Display mode. The following buttons are supported in the user interface: ...

  • Optoma EW675UTis - page 65

    65 English User Controls • Slide Effect: Following modes are supported. (Slide Right/Slide Down/Slide Up/Slide Auto) • Repeat ON/OFF: Enable/Disable Slide Show Repeat Mode. Press Up/Down/Left/Right key to choose different functions. When the image can NOT be displayed due to memory limitation or can NOT support image format, the specic image ...

  • Optoma EW675UTis - page 66

    66 English User Controls How to use the Optoma Presenter Optoma Presenter application allows remote desktop from a host PC to be displayed on the network display through Ethernet, USB, or Wireless transports. It can adapt to different network settings (DHCP , xed IP , and direct link by USB/Ethernet cable). This software can be downloaded from w ...

  • Optoma EW675UTis - page 67

    67 English User Controls Click the button to enter Connect and Search Menu. 1. Enter IP address of projector , select the option “Directly”, and then click “Connect” button to enter log-in interface; or Click “Search” button to search the projectors on network and select projectors to connect. 2. Input “User type” and “Password” ...

  • Optoma EW675UTis - page 68

    68 English User Controls Click the button to enter Setting interface, including Basic Set- ting and Advanced Setting. • Basic Setting: Select Language, Region size of xed size cap - ture mode and allow notication message popup. • Advanced Setting: select JPEG image quality , YUV sample format and network port. Click the button to control ...

  • Optoma EW675UTis - page 69

    69 English User Controls • : Click this unlock icon, the password can be changed. (Pass- word change to target network display , only a connection with an Administrator user logged in can change the password.) • : Click this lock icon will result in no response. • : Disconnect with target network display . • : Connect the target network dis ...

  • Optoma EW675UTis - page 70

    70 English Appendices No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp” ...

  • Optoma EW675UTis - page 71

    71 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a Notebook: 1. First, follow the steps ...

  • Optoma EW675UTis - page 72

    72 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance. See page 18. The image is stretched when displaying 16:9 DVD title  When you play anamorphic DVD or 16:9 DVD, the projector will show the best im ...

  • Optoma EW675UTis - page 73

    73 English Appendices Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. T o replace the lamp, follow the procedures in the “Replacing the Lamp” section on pages 76-77. LED ...

  • Optoma EW675UTis - page 74

    74 English Appendices On Screen Messages  T emperature warning:  Fan failed:  Lamp warning:  Out of display range:  Filter warning: If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .  Make sure there ...

  • Optoma EW675UTis - page 75

    75 English Appendices If the Interactive pen does not work  Check the input source is PC (VGA, HDMI, Wireless and LAN source)  Check the Interactive function is turned On.  When using Wireless or LAN connection, and the Pen does not work, check if the Wireless/Network function is turned On.  If more than one Pen point toward the screen ...

  • Optoma EW675UTis - page 76

    76 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea ...

  • Optoma EW675UTis - page 77

    77 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover . 1 5. Lift up and remove the cover . 2 6. Unscrew the three screws on the lamp module. 3 7. Lift ...

  • Optoma EW675UTis - page 78

    78 English Appendices Replacing and cleaning the dust lter We recommend cleaning the dust lter after every 300 hours of use, clean it more often if the projector is used in a dusty environment. When you see this message, please nd following steps for cleaning procedure:  If dust builds up on the lter is not cleaned, the projector ...

  • Optoma EW675UTis - page 79

    79 English Appendices  For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.  120Hz input signals may be dependent on graphics cards support.  Please note that using resolutions other than native 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of image clarity .  ...

  • Optoma EW675UTis - page 80

    80 English Appendices Video Compatibility Computer Compatibility Mode Resolution V -Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 1152 × 870 75.06 68.68 MAC G4 640 × 480 60 31.35 i MAC DV 1024 × 768 75 60.00 i MAC DV 1152 × 870 7 ...

  • Optoma EW675UTis - page 81

    81 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 TXD 2 RXD 3 GND RS232 Commands and Protocol Function List 3 1 2  RS232 shell is grounded. ...

  • Optoma EW675UTis - page 82

    82 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. XX=00-99, projector's ID, XX=00 is fo ...

  • Optoma EW675UTis - page 83

    83 English Appendices ----------------------------- -------------------------------- ------------------------------- --------------------------------------------- ------------------------------------ ---------------------------------------------- ~XX39 11 7 E 30 30 33 39 2 0 31 31 0D Flash Driv e ~XX39 12 7 E 30 30 33 39 2 0 31 32 0D Presenter(LAN+ ...

  • Optoma EW675UTis - page 84

    84 English Appendices -------------------------- ---------------------------------- -------------------------------- --------------------------------- --------------------------------------------- --------------------------------- ---------------- ~XX81 n 7E 30 30 38 31 20 a 0D Vol ume n = 0 (a =30) ~ 20 (a =32 30) ~XX82 1 7E 30 30 38 32 20 31 0D L ...

  • Optoma EW675UTis - page 85

    85 English Appendices -------------------------- ---------------------------------- -------------------------------- --------------------------------- --------------------------------------------- --------------------------------- ---------------- ~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone + ~XX140 16 7E 30 30 31 34 30 20 31 36 0D Keystone - ...

  • Optoma EW675UTis - page 86

    86 English Appendices  Please note that damage resulting from incorrect installation will void the warranty . W all Mount Installation 1. T o prevent damage to you r projector , please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the ...

  • Optoma EW675UTis - page 87

    87 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www .optoma.ca services@optoma.com ...

  • Optoma EW675UTis - page 88

    88 English Appendices Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム info@osscreen.com サポ? ...

  • Optoma EW675UTis - page 89

    89 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r ...

Manufacturer Optoma Category Video projector

Documents that we receive from a manufacturer of a Optoma EW675UTis can be divided into several groups. They are, among others:
- Optoma technical drawings
- EW675UTis manuals
- Optoma product data sheets
- information booklets
- or energy labels Optoma EW675UTis
All of them are important, but the most important information from the point of view of use of the device are in the user manual Optoma EW675UTis.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Optoma EW675UTis, service manual, brief instructions and user manuals Optoma EW675UTis. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Optoma EW675UTis.

Similar manuals

A complete manual for the device Optoma EW675UTis, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Optoma EW675UTis by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Optoma EW675UTis.

A complete Optoma manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Optoma EW675UTis - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Optoma EW675UTis, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Optoma EW675UTis, that we can find in the current document
3. Tips how to use the basic functions of the device Optoma EW675UTis - which should help us in our first steps of using Optoma EW675UTis
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Optoma EW675UTis
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Optoma EW675UTis in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Optoma EW675UTis?

Use the form below

If you did not solve your problem by using a manual Optoma EW675UTis, ask a question using the form below. If a user had a similar problem with Optoma EW675UTis it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)