Manual Supermicro AOC-STG-I2

15 pages Not applicable
Download

Go to site of 15

Summary
  • Supermicro AOC-STG-I2 - page 1

    Rev . 1.0 AOC-STG-I2 USER'S GUIDE ...

  • Supermicro AOC-STG-I2 - page 2

    ii Add-on Card User's Guide The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organizati ...

  • Supermicro AOC-STG-I2 - page 3

    iii Safety Information and T echnical Specifi cations T able of Contents Introduction Overview .............................................................................................................v Product Features .................................................................................................v Supported Operating Systems ...

  • Supermicro AOC-STG-I2 - page 4

    iv Add-on Card User's Guide Notes ...

  • Supermicro AOC-STG-I2 - page 5

    v Safety Information and T echnical Specifi cations Introduction Overview This manual is written for system integrators, PC technicians and knowledgeable PC users who intend to integrate Supermicro's AOC-STG-I2 Add-on Card. Product Features The AOC-STG-I2 offers the following features: High-performing, PCI-E 10Gb Ethernet connection ideally s ...

  • Supermicro AOC-STG-I2 - page 6

    vi Add-on Card User's Guide Supported Operating Systems The AOC-STG-I2 supports the following Operating Systems (OS): Windows 2000/Windows XP/Windows 2003 Linux VMW are ESX Server Required Cables The AOC-STG-I2 requires the following cables: CX4 copper-based cable. Maximum length 15 meters. Infi niBand 4x DDR cable (converts CX4 to optical). ...

  • Supermicro AOC-STG-I2 - page 7

    vii Safety Information and T echnical Specifi cations Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe A ...

  • Supermicro AOC-STG-I2 - page 8

    1-1 Safety Information and T echnical Specifi cations Chapter 1 Safety Guidelines T o avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. 1-1 ESD Safety Guidelines Electric Static Discharge (ESD) can damage electronic com ponents. T o prevent dam- age ...

  • Supermicro AOC-STG-I2 - page 9

    1-2 Add-on Card User's Guide 1-3 An Important Note to Users All images and layouts shown in this user's guide are based upon the latest PCB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual. • ...

  • Supermicro AOC-STG-I2 - page 10

    2-1 Safety Information and T echnical Specifi cations Chapter 2 Add-on Card Components 2-1 Front Connectors and LEDs Components 1. LAN Connector Ports 2. LAN Port LEDs 3. Intel ® 82598EB 3 2 1 1 ...

  • Supermicro AOC-STG-I2 - page 11

    2-2 Add-on Card User's Guide 2-2 Front Connector and LED Defi nitions 1. LAN ports LAN ports allow the Add-on card to connect a maximum of two network cables (CX4 connectors). Each LAN port provides up to 10 gigabits per second connection speed and require CX4 copper-based cables for maximum throughput. The ports are designated Port 1 and Por ...

  • Supermicro AOC-STG-I2 - page 12

    3-1 Safety Information and T echnical Specifi cations Chapter 3 Installation 3-1 Before Installation Before installation, do the following Power down the system. Remove the power cord from the wall socket. Use industry standard anti-static equipment (i.e. gloves or wrist strap) and/or an environment that prevents accidental electrostatic discharge ...

  • Supermicro AOC-STG-I2 - page 13

    3-2 Add-on Card User's Guide 3-3 Windows 2003/XP/2000 Installation Use the following instructions to install the drivers to a supported Windows Operat- ing Systems. (For the latest systems, see page v .) Run the Installation CD and when prompted click Install Drivers and Soft- ware . Check I accept the terms in the license agreement . Click Ne ...

  • Supermicro AOC-STG-I2 - page 14

    3-3 Safety Information and T echnical Specifi cations 2. Untar/unzip archive: tar zxf ixgbe-x.x.x.tar.gz 3. Change to the driver src directory: cd ixgbe-x.x.x/src/ 4. Compile the driver module: make install The binary will be installed as: /lib/modules/[KERNEL_VERSION]/kernel/drivers/net/ixgbe/ ixgbe.[k]o The install locations listed above are the ...

  • Supermicro AOC-STG-I2 - page 15

    3-4 Add-on Card User's Guide 6. Assign an IP address to the interface by entering the following, where x is the interface number: ifconfi g ethx <IP_address> netmask <netmask> 7. V erify that the interface works. Enter the following, where <IP_address> is the IP address for another machine on the same subnet as the interface ...

Manufacturer Supermicro Category Network card

Documents that we receive from a manufacturer of a Supermicro AOC-STG-I2 can be divided into several groups. They are, among others:
- Supermicro technical drawings
- AOC-STG-I2 manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro AOC-STG-I2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro AOC-STG-I2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro AOC-STG-I2, service manual, brief instructions and user manuals Supermicro AOC-STG-I2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro AOC-STG-I2.

A complete manual for the device Supermicro AOC-STG-I2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro AOC-STG-I2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro AOC-STG-I2.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro AOC-STG-I2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro AOC-STG-I2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro AOC-STG-I2, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro AOC-STG-I2 - which should help us in our first steps of using Supermicro AOC-STG-I2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro AOC-STG-I2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro AOC-STG-I2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro AOC-STG-I2?

Use the form below

If you did not solve your problem by using a manual Supermicro AOC-STG-I2, ask a question using the form below. If a user had a similar problem with Supermicro AOC-STG-I2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)