English dropdown-ico

Manual Technika 42-2020

38 pages 5.82 mb
Download

Go to site of 38

Summary
  • Technika 42-2020 - page 1

    COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767 42-2020 ...

  • Technika 42-2020 - page 2

    English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions ... ...

  • Technika 42-2020 - page 3

    English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • USB input. • 200 programmes from VHF , UHF(analogue). • 300 programmes for digital mode (IDTV). • On Screen Display (O ...

  • Technika 42-2020 - page 4

    English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cor ...

  • Technika 42-2020 - page 5

    English - 4 - Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology ...

  • Technika 42-2020 - page 6

    English - 5 - Environmental Information • This television is designed to consume less energy to save environment. Y ou not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy ef fi ciency feauture of this TV . T o reduce energy consumption, you should take the following steps: • Y ou ...

  • Technika 42-2020 - page 7

    English - 6 - Overview of the Remote Control SUBTITLE SLEEP F IN O/ PE S T RE R ETURN V P 1 4 7 2 5 8 3 6 9 JKL STU DEF MNO VWX PQR YZ M OK GHI S O U R C E ABC EPG 0 SCREEN LANG FAV TV DTV SA P W Standby 1. Y ellow / Feature menu / Current language (*) 2. (in DTV mode) Blue / Install menu / Favourite mode (*) 3. (in DTV mode) PIP / P AP mode 4. Gui ...

  • Technika 42-2020 - page 8

    English - 7 - LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ” / “ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors 12 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital ...

  • Technika 42-2020 - page 9

    English - 8 - 4. SCART 2 inputs or outputs for external devices. 5. SCART 1 inputs or outputs for external devices. Connect the SCART cable between SCART sockets on TV and SCART socket on your external device (such as a decoder , a VCR or a DVD player). Note : If an external device is connected via the SCART sockets, the TV will automatically switc ...

  • Technika 42-2020 - page 10

    English - 9 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section. Side USB input . 2. Note : Codec update cannot be performed. Headphone jack is used for connecting an external headphone ...

  • Technika 42-2020 - page 11

    English - 10 - Using Digital Multimedia Connectors • Y ou can connect USB devices to your TV by using the USB input of the TV . This feature allows you to display/play JPG and MP3 fi les stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV . • Y ou may back up your ? ...

  • Technika 42-2020 - page 12

    English - 1 1 - Using Side A V Connectors Y ou can connect a range of optional equipment to your LCD TV . Possible connections are shown below . Note that cables shown in the illustration are not supplied. • For connecting a camcorder , connect to the VIDEO IN socket and the AUDIO SOCKETS. Do not connect the camcoder to VIDEO IN socket at the sam ...

  • Technika 42-2020 - page 13

    English - 12 - Switching the TV On/Off T o Switch the TV On • Connect the power cord to the 220-240V AC, 50 Hz. • Press ST ANDBY switch. Then the standby LED lights up. • T o switch on the TV from standby mode either: • Press the “ ” button, P+ / P- or a numeric button on the remote control. • Press the -P/CH or P/CH+ button on the TV ...

  • Technika 42-2020 - page 14

    English - 13 - Initial Settings When the TV is turned on for the fi rst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the On Screen Display (OSD). By pressing the “ ” or “ ” buttons highlight the language you want ...

  • Technika 42-2020 - page 15

    English - 14 - General Operation Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and its normal analogue broadcasting. Information Banner • Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays t ...

  • Technika 42-2020 - page 16

    English - 15 - Digital T eletext (** for UK only) • Press the TELETEXT ( ) button. • The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen. ? ...

  • Technika 42-2020 - page 17

    English - 16 - • Press “ ” or “ ” buttons to select the “ Move ” item on Channel List menu. Note : If you enter the same programme number of the channel that you want to move, “.... channel services will be replaced. Do you want to continue?” On Screen Display (OSD) will be displayed. Press OK to con fi rm or select “No” to c ...

  • Technika 42-2020 - page 18

    English - 17 - How to Add a Channel to a Favourites List • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. • By pressing OK button, the highlighted channel is added to the Favourite List. • F icon indicates that a channel is added to Favourite List. Removing a Channel from Favourite Li ...

  • Technika 42-2020 - page 19

    English - 18 - • T o see the viewing contract information: enter IDTV ; press the “ M ” button, then highlight Conditional Access and press the OK button. • When no module is inserted, “No Conditional Access module detected” message appears on the screen. • Refer to the module instruction manual for details of the settings. NOTE: Inse ...

  • Technika 42-2020 - page 20

    English - 19 - channels as well. If it is set as OFF manually , encrypted channels will not be located while in automatic search or manual search. Use “ ” or “ ” button to select Scan Encrypted and then press “ ” or “ ” button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) T o ensure that your TV always h ...

  • Technika 42-2020 - page 21

    English - 20 - screen. Current T ime,T ime Zone Setting and Time Zone will be available. Use “ ” or “ ” buttons to highlight the T ime Zone Setting. T ime Zone Setting is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL. When AUTO is selected, Current Time and Time Zone options will not be available to be set. If MANUAL ...

  • Technika 42-2020 - page 22

    English - 21 - In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. Notes: • System Language ...

  • Technika 42-2020 - page 23

    English - 22 - First Time Installation The user can use this item to load default settings, which were loaded to the receiver at the factory . T o install factory settings, highlight “First T ime Installation” menu item and press OK button, then you will be asked whether or not to delete the settings. Selecting “Y es” by pressing OK button ...

  • Technika 42-2020 - page 24

    English - 23 - Viewing JPG Files Jump (Numeric buttons) : jump to selected fi le using the numeric buttons. OK : views the selected picture in full screen. Play / Slideshow (Green button) : starts the slideshow with all pictures in the folder . Slideshow Options Pause (Y ellow button) : Pause the slideshow . Continue (Green button) : Continue with ...

  • Technika 42-2020 - page 25

    English - 24 - Noise Reduction If the broadcast signal is weak and the picture is noisy , use Noise Reduction setting to reduce the noise amount. Press “ ” or “ ” button to select Noise Reduction. Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off . Film Mode Films are recorded at a different number of ...

  • Technika 42-2020 - page 26

    English - 25 - Press “ ” or “ ” button to select Balance . Press “ ” or “ ” button to change the level of the balance. Balance level can be adjusted between -32 and + 32 . Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Headphone sub-menu options are described below: V ...

  • Technika 42-2020 - page 27

    English - 26 - PIP Position This setting is used for moving the sub picture. Select PIP Position item by using “ ” or “ ” button. Use “ ” or “ ” button to adjust PIP position. Positions available are: Bottom Right,Bottom Left, T op Left and T op Right. Source PIP Source setting enables you to select the source of the sub picture. Se ...

  • Technika 42-2020 - page 28

    English - 27 - Full Mode (optional) If you connect a device via HDMI or YPbPr connectors and set 1080i/1080P resolutions, Full Mode item will be visible.Y ou can set Full Mode as 1:1 or Normal by using “ ” or “ ”.If you select 1:1, screen ratio will be adjusted correctly . If you set Normal, screen ratio may expand. Install Menu Program Pre ...

  • Technika 42-2020 - page 29

    English - 28 - A V modes). By cursor action, programme selection is done automatically . Name T o change the name of a programme, select the programme and press the RED button. The fi rst letter of the selected name will be highlighted. Press “ ” or “ ” button to change that letter and “ ” or “ ” button to select the other letters. ...

  • Technika 42-2020 - page 30

    English - 29 - Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically . This setting therefore automatically optimizes the display . Select Autoposition item by using “ ” or “ ” buttons. Press OK or “ ”, “ ” button. Warning : Please ...

  • Technika 42-2020 - page 31

    English - 30 - Zoom Modes Y ou can change the aspect ratio (image size) of the TV for viewing the picture in dif ferent zoom modes. Press “ SCREEN ” button to directly change the zoom mode. Available zoom modes are listed below . Note : In YPbPr and HDMI modes, while in 720p-1080i resolutions, only 16:9 mode is available. In PC mode, only 16:9 ...

  • Technika 42-2020 - page 32

    English - 31 - “SCREEN” Expand Press once to enlarge top half of the page, press again to enlarge the bottom half of the page. Press again to revert back to normal size. “ ” Reveal Shows hidden information (e.g. solutions of games). “OK” Hold Holds a text page when convenient. Press again to resume. “ ” Subcode Pages Selects subcode ...

  • Technika 42-2020 - page 33

    English - 32 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Y our TV may not support dif ferent resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning On ...

  • Technika 42-2020 - page 34

    English - 33 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i ; 480p ; 576i ; 576p ; 720p ;; 1080i ;; 1080p ;;;; ; Appendix D: PIP/P AP Mode Combinations MAIN TV DTV/USB Scart1 ...

  • Technika 42-2020 - page 35

    English - 34 - Appendix E: Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio (Maximum resolution/Bit rate etc.) Movie .mpg/ .dat/ .vob MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 XviD/ 3ivx PCM/MP3 XviD V erson up to: 1.1.2 MPEG4 PCM/MP3 .avi MS ISO MPEG4 PCM/MP3 Support SP and ASP MJPEG PCM 30fps@VGA Music -- -- PCM Sample ...

  • Technika 42-2020 - page 36

    English - 35 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for ...

  • Technika 42-2020 - page 37

    English - 36 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspon ...

  • Technika 42-2020 - page 38

    5 0 1 7 4 9 3 4 ...

Manufacturer Technika Category Flat Panel Television

Documents that we receive from a manufacturer of a Technika 42-2020 can be divided into several groups. They are, among others:
- Technika technical drawings
- 42-2020 manuals
- Technika product data sheets
- information booklets
- or energy labels Technika 42-2020
All of them are important, but the most important information from the point of view of use of the device are in the user manual Technika 42-2020.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Technika 42-2020, service manual, brief instructions and user manuals Technika 42-2020. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Technika 42-2020.

Similar manuals

A complete manual for the device Technika 42-2020, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Technika 42-2020 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Technika 42-2020.

A complete Technika manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Technika 42-2020 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Technika 42-2020, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Technika 42-2020, that we can find in the current document
3. Tips how to use the basic functions of the device Technika 42-2020 - which should help us in our first steps of using Technika 42-2020
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Technika 42-2020
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Technika 42-2020 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Technika 42-2020?

Use the form below

If you did not solve your problem by using a manual Technika 42-2020, ask a question using the form below. If a user had a similar problem with Technika 42-2020 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)