English dropdown-ico

Manual Viewsonic PJD5234

80 pages Not applicable
Download

Go to site of 80

Summary
  • Viewsonic PJD5234 - page 1

    PJD5132/PJD5232L/PJD5134/ PJD5234L/PJD5533w DLP Projector User Guide IMPORT ANT : Please read this User Guide to obtain important information on installing and using your product in a safe manner , as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewS ...

  • Viewsonic PJD5234 - page 2

    i FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the li ...

  • Viewsonic PJD5234 - page 3

    ii Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water . 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer ’s instructions. 8. Do not install near any ...

  • Viewsonic PJD5234 - page 4

    iii Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply ZLWKWKHPD[LPXPFRQFHQWUDWLRQYDOXHV? ...

  • Viewsonic PJD5234 - page 5

    iv Copyright Information Copyright © ViewSonic ® Corporation, 2012. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT , and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnV iew , ...

  • Viewsonic PJD5234 - page 6

    1 T able of content s Important safety instructions ....................... 2 Introduction ......................4 Projector features ................................. 4 Shipping contents ................................. 5 Projector exterior view ......................... 6 Controls and functions ......... ............... . 7 Positioning your proj ...

  • Viewsonic PJD5234 - page 7

    2 Import ant safety instructions Y our projector is designed and tested to meet the latest standards for safety of information technology equipment. However , to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please r ead this manual before ...

  • Viewsonic PJD5234 - page 8

    3 13. Do not block the ventilation holes. If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire. - Do not place this projector on a blanke t, bedding or any other soft surface. - Do not cover this projector with a cloth or any other item. - Do not place inflammables ne ar the projector. 14. Always ...

  • Viewsonic PJD5234 - page 9

    4 Introduction Pr ojector featur es The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability a nd ease of use. The projector of fers the following features. • Dynamic PC and Dynamic Movie functions adjusting the power consumption of the lamp according to the brightness of the image ...

  • Viewsonic PJD5234 - page 10

    5 Shipping contents Carefully unpack and verify that yo u have all of the items shown below . If any of these items are missing, please contact y our place of purchase. S tandard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional accessories 1. Replacement lamp 2. Soft carry case 3 ...

  • Viewsonic PJD5234 - page 11

    6 Pr ojector exterior view 1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. V ent (heated air ex haust) 4. Front IR remote sensor 5. Adjuster foot 6. Focus and Zoom rings 7. Projection lens 8. RS-232 control port 9. T ype B USB port 10. HDMI port 1 1. RGB (PC)/Component video (YPbPr/YCbCr) signal input s ...

  • Viewsonic PJD5234 - page 12

    7 Contr ols and functions Projector 1. Focus ring Adjusts the focus of the projected image. 2. Zoom ring Adjusts the size of the image. 3. Keystone/Arrow k eys ( / Up , / Down) Manually corrects distorted images resulting from an angled projectio n. 4. Left/Blank Hides the screen picture. 5. POWER indicator light Lights up or flashes when the proje ...

  • Viewsonic PJD5234 - page 13

    8 Remote contr ol T o use the remote mouse control keys (Page Up, Page Down, , and ), see "Using the remote mouse control" on page 10 for det ails. 1. POWER T oggles the projector between standby mode and on. 2. Source se lection keys (VGA/Video) Selects an input source for display . VGA Selects D-Sub / Comp. 1 or D-Sub / Comp. 2 source f ...

  • Viewsonic PJD5234 - page 14

    9 Remote control code The projector can be assigned to two different remote control codes, A or B. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control ...

  • Viewsonic PJD5234 - page 15

    10 Using the remote mouse contr ol The capability of operating your computer with the remote control gives you more flexibility when delivering p resentations. 1. Connect the projector to your P C or notebook with a USB cab le prior to using the remote control in place of your computer ’ s mouse. See "Connecting a computer" on page 16 f ...

  • Viewsonic PJD5234 - page 16

    11 Replacing the remote contr ol batteries 1. T o open the battery cov er , turn the remote control over to view its back, push on the finger grip on the cover and slide it in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (if necessary) and insta ll two AAA batteries observing the battery pola ...

  • Viewsonic PJD5234 - page 17

    12 Positioning your projector Choosing a location Y our room layout or personal preference will dictate which installation location you select. T ake into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Y our proje ...

  • Viewsonic PJD5234 - page 18

    13 Pr ojection dimensions Refer to "Dimensions" on page 60 for the center of lens dimensions of this projector before calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5132/PJD5232L/PJD5134/PJD5234L (a) Screen Size [inch ( ...

  • Viewsonic PJD5234 - page 19

    14 PJD5533w There is 3% tolerance among these numbers due to optical comp onent variations. It is recommended that if you intend to permanently inst all the projector , you should physically test the projection size and distance using the actual projector in situ before y ou permanently instal l it, so as to make allowance for this projector's ...

  • Viewsonic PJD5234 - page 20

    15 Connection When connecting a signal source to the projector , be sure to: 1. T urn all equipment off before making any connections. 2. Use the correct signal cables for each sou rce. 3. Ensure the cables are firmly inserted. • In the connections shown below , some cables may not be included with the projector (see "Shipping conten ts" ...

  • Viewsonic PJD5234 - page 21

    16 Connecting a computer or monitor Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both IBM® compatibles and Macintosh® computer s. A Mac adapter is needed if y ou are connecting legacy version Macintosh computers. T o connect the pr ojector to a notebook or desktop computer: 1. T ake the supp ...

  • Viewsonic PJD5234 - page 22

    17 Connecting V ideo sour ce devices Y ou can connect your projector to various V ideo source devices that provide any one of the following output sockets: • HDMI • Component V ideo •S - V i d e o • V ideo (composite) Y ou need only connect the projector to a V ideo source device using just on e of the above connecting methods, however each ...

  • Viewsonic PJD5234 - page 23

    18 If you have a separate so und system, you will most likely want to connect the audio output of your V ideo source device to that sound system, instead of to the mono audio projector . Connecting an HDMI device Y ou should use an HDMI cable when making connection between the projector and HDMI devices. T o connect the projector to an HDMI device: ...

  • Viewsonic PJD5234 - page 24

    19 Connecting an S-V ideo source device Examine your V ideo source device to determine if it has an unused S-V ideo output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. T o connect the pr ojector to an S-V ideo source device: 1. T ake an S- ...

  • Viewsonic PJD5234 - page 25

    20 Operation S tarting up the projector 1. Plug the power cord into the projector and into a wall socket. T urn on the wall socket switch (where fitted). 2. Press POWER on the projector or remote control to start the projector . The POWER indicator light stays blue when the projector is on. (If necessary) Rotate the fo cus ring to adjust the image ...

  • Viewsonic PJD5234 - page 26

    21 Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. The OSD screenshots below are for reference only , and may differ from the actual design. Below is the overview of the OSD menu. T o use the OSD menus, please set them to your familiar language first. 1. Press MENU/EX IT on t ...

  • Viewsonic PJD5234 - page 27

    22 Utilizing the password function For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security . The password can be set through the On-S creen Display (OSD) menu. For details of the OSD menu operation, please refer to "Using the menus" on page 21 . Y ou will be inconvenien ...

  • Viewsonic PJD5234 - page 28

    23 Entering the password r ecall procedur e 1. Press and hold AUTO on the projector or Auto Sync on the remote control for 3 seconds. The projector will display a coded number on the screen. 2. W rite down the number and turn off your projector . 3. Seek help from the local service center to decode the number . Y ou may be required to provide proof ...

  • Viewsonic PJD5234 - page 29

    24 Disabling the password function T o disable password protection, go back to the SYSTEM SETT ING: ADVANCED > Security Settings > Power On Lock menu after opening the OSD menu system. Select Off by pressing / . The message 'INPUT P ASSWORD' is displayed. Enter the current password. • If the password is correct, the OSD menu retur ...

  • Viewsonic PJD5234 - page 30

    25 Switching input signal The projector can be connected to multiple devices at the same time. However , it can only display one full screen at a time. Be sure the Quick Auto Search function in the SOURCE menu is On if you want the projector to automatically search for the signals. Y ou can also manually select the desired signal by pressing one of ...

  • Viewsonic PJD5234 - page 31

    26 • YUV : Sets the color space as Y UV . • Auto : Sets the projector to detect the color space setting of input signal automatically . 3. Press to highlight HDMI Range and press / to select a suitable HDMI color range according to the color range setting of the output device connected. • Enhanced : Sets the HDMI color range as 0 - 255. • N ...

  • Viewsonic PJD5234 - page 32

    27 Corr ecting keystone Keystoning refers to the situation where the projected image is n oticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen. T o correct this, besides adjusting the height of the projector , you will need to manually correct it following one of these steps. • Using the rem ...

  • Viewsonic PJD5234 - page 33

    28 Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. W i th the advent of digital signal processing, dig ital display devices like this projector can dynamically stretch and scale the image out ...

  • Viewsonic PJD5234 - page 34

    29 About the aspect ratio In the pictures below , the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto : Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neit ...

  • Viewsonic PJD5234 - page 35

    30 6. Anamorphic (PJD5132/PJD5134/PJD5232L/ PJD5234L only) : Scales a 16:9 aspect image vertically and horizontally in a non-linear manner so that it fills the screen with a 4:3 aspect ratio. 16:9 picture ...

  • Viewsonic PJD5234 - page 36

    31 Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. T o select an operation mode that suits your need, you can follow one of the following steps. • Press MODE/ENT ER on the projector or Color Mode ...

  • Viewsonic PJD5234 - page 37

    32 4. Movie mode : Is suitable for enjoying dark movies or DVD m ovies best viewed in a blackened (little light) home cinema or lounge room environment. 5. Dynamic Movie mode : Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment. In addition, the projector will optimize ...

  • Viewsonic PJD5234 - page 38

    33 Adjusting Brightnes s Highlight the PICTURE > Brightness menu and press / . The higher the value, the brighter the image. And the lower the setting, the darker the image. Adjust this control so the black areas of the image appear just as black and that detail in the dark areas is visible. Adjusting Contrast Highlight the PICTURE > Contrast ...

  • Viewsonic PJD5234 - page 39

    34 4. T4: Makes images appear red dish white. *About color temperatures: There are many dif ferent shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the “colo r temperature”. A white color with a low color temperature appears to be reddish white. A white co ...

  • Viewsonic PJD5234 - page 40

    35 Setting the pr esentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Tim er on the remote control to access the Presentation Timer menu or go to the SYSTEM SETTING: ADVANCE D > Presentation ...

  • Viewsonic PJD5234 - page 41

    36 Hiding the image In order to draw the audience's full attention to the presenter , you can use on the projector or Blank on the remote control to hide the screen image. Press any key on the projector or remote control to restore the image. The word ' BLANK ' appears at the lower right corner of the scre en while the image is hidde ...

  • Viewsonic PJD5234 - page 42

    37 T o activate the High Altitude Mode : 1. Press MENU/E XIT on the projector or Menu on the remote control and then press / until the SYSTEM SETTING: ADVANCED menu is highlighted. 2. Press to highlight High Altitude Mode and press / to select On . A confirmation message is displayed. 3. Highlight Yes and press MODE/ENTER on the projector or Enter ...

  • Viewsonic PJD5234 - page 43

    38 2. Press to highlight 3D Settings and press MODE/ENTER on the projector or Enter on the remote control. 3. Press to highlight 3D Sync and press MODE/ENT ER on the projector or Enter on the remote control. 4. Press to select a 3D Sy nc setting according to the table below and then press MODE/ENTER on the projector or Enter on the remote control t ...

  • Viewsonic PJD5234 - page 44

    39 Active Audio Out Selecting On outputs an audio signal when the AUDIO IN and AUDIO OUT sockets are correctly connected to devices. Quick Power Off Selecting On enables the function and the projector will not enter the cooling process after being shut down. Selecting Off disables the function and the projector will enter normal cooling process aft ...

  • Viewsonic PJD5234 - page 45

    40 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu item s are accessible. Main menu Sub-menu Options 1. D ...

  • Viewsonic PJD5234 - page 46

    41 Main menu Sub-menu Options 3. SOURCE Quick Auto Search Off/On HDMI Format (PJD5134/PJD5234L/ PJD5533w only) RGB / YUV / Auto HDMI Range (PJD5134/PJD5234L/ PJD5533w only) Enhanced / Normal DynamicEco Timer Disable/5 min/10 min/15 mi n/ 30 min Smart Restart Off/On Pattern Off/01/02/03/04/05 My Button Projection (Projector Position)/3D Sync/L amp M ...

  • Viewsonic PJD5234 - page 47

    42 5. SYSTEM SETTING: ADVANCED High Altitude Mode On/Off DCR On/Off Audio Settings Mute On/Off Volume Menu Settings Menu Display Time 5 sec/10 sec/15 sec/20 sec/25 sec/30 sec Menu Position Center/T op-Left/T op- Right/Bottom-Le ft/ Bottom-Right Closed Caption Closed Caption Enable On/Off Caption Version CC1/CC2/CC3/CC4 Lamp Settings Lamp Mode Norma ...

  • Viewsonic PJD5234 - page 48

    43 Main menu Sub-menu Options 6. INFORMATION Current System Status • Source • Color Mode • Resolut ion • Color System • Equivalent Lamp Hour ...

  • Viewsonic PJD5234 - page 49

    44 Description of each menu Function Description Screen Colo r Corrects the projected picture’ s color when the projection surface is not white. See "Using Screen Colo r" on page 32 for deta ils. Aspect Ratio There are three options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspec ...

  • Viewsonic PJD5234 - page 50

    45 Function Description Color Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your prog ram type. See "S electing a picture mode" on page 31 for details. Reference Mode Selects a picture mode that most suits your need for the image quality and further fine-tune the image base d on the se ...

  • Viewsonic PJD5234 - page 51

    46 Function Descriptio n Quick Auto Search See "Switching input sign al" on page 25 for details. HDMI Format See "Changing HDMI input setting s" on page 25 for details. HDMI Range DynamicEco Timer Allows the projector to decrease the power consumption automatically if no input signal is detected after a set period of time. It t ...

  • Viewsonic PJD5234 - page 52

    47 Function Description Language Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 21 for details. Projector Position The projector can be insta lled on a ceiling or behind a screen , or with one or more mirrors. See "Choo sing a loc ation" on page 12 for details. Auto Power Off Allows the pr ...

  • Viewsonic PJD5234 - page 53

    48 Function Description High Altitude Mode A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 36 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and eco ...

  • Viewsonic PJD5234 - page 54

    49 Function Description Presentation Timer Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on p age 35 for details. Security Settings See "Utilizing the password function" on page 22 for details. Remote Control Code See "Remote control code" on page 9 f ...

  • Viewsonic PJD5234 - page 55

    50 Maintenance Car e of the projector Y our projector needs little maintenance. The only thin g you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface. • ...

  • Viewsonic PJD5234 - page 56

    51 Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer . T o obtain the lamp hour information: 1. Press MENU/EXIT on the projector or Menu on the remote control and then press / until the SYSTEM SETTIN G: ADVANCED menu is highlight ...

  • Viewsonic PJD5234 - page 57

    52 T iming of replacing the lamp When the LAMP indicato r light lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer . An old lamp may cause a malfunction in the projector and in some instance s the lamp may explode. CAUTION The LAMP indicator light and TEMPerature indicator ...

  • Viewsonic PJD5234 - page 58

    53 Replacing the lamp T o prepare a new lamp, contact your dealer and tell the lamp type number . T ype number: RLC-078 (PJ D 5132/PJD5232L/PJD5134/PJD5234L) T ype number: RLC-085 (PJD5533w) W ARNIN G Hg - Lamp contains mer cury . Manage in accordance with local disposal laws. See www .lamprecycle.org • Be careful of broken glass when replacing t ...

  • Viewsonic PJD5234 - page 59

    54 4. Loosen the screw that secures the lamp. 5. Disconnect the lamp’ s wire connector from the projector , and then lift the handle so that it stands up. Use the handle to slowly pull the lamp out of the projector . CAUTION • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector . • Do not place the lam ...

  • Viewsonic PJD5234 - page 60

    55 12. Restart the projector . CAUTION Do not turn the power on with the lamp cover removed. Resetting the lamp timer 13. After the startup logo, open the On-Screen Display (OSD) menu. 14. Go to the SYSTEM SETTING: ADVANCED > Lamp Settings menu. Press MODE/ENTER on the projector or ENTER on the remote control. The Lamp Settings page is displayed ...

  • Viewsonic PJD5234 - page 61

    56 Indicators Light St atus & Description POWER TEMP LAMP Power event s Blue Flashing Off Off Stand-by mode Blue Off Off Powering up Blue Off Off Normal operation Lamp event s Purple Flashing Off Red The projector has shut down automatically . If you try to re-start the projector , it will shut down again. Please contact your dealer for assista ...

  • Viewsonic PJD5234 - page 62

    57 T roubleshooting The projector does not turn on. No picture Blurred image Remote control does not work Cause Remedy There is no power from the power cord. Plug the power cord into the AC inle t on the projector , and plug the power cord into th e power outlet. If the power outlet has a switch, make sure that it is switched on. Attempting to turn ...

  • Viewsonic PJD5234 - page 63

    58 Specifications Pr ojector specifications • All specifications are subject to change without notice. • Not all models can be purchased in your region. General Product name DLP Projector Optical Resolution PJD5132/PJD5134 : 800 x 600 SVGA PJD5232L/PJD5234L : 1024 x 768 XGA PJD5533w : 1280 x 800 WXGA Display system 1-CHIP DMD Lamp 190 W lamp El ...

  • Viewsonic PJD5234 - page 64

    59 Output terminal RGB output D-Sub 15-pin (female) x 1 Audio signal output PC audio jack x 1 Speaker 2 watt x 1 Control terminal RS-232 serial control 9 pin x 1 LAN N/A USB serial control T ype mini B IR receiver x 1 (Front) Environment al Requirement s Operating temperature 0°C–40°C at sea lev el Operating relative humidity 10%–90% (without ...

  • Viewsonic PJD5234 - page 65

    60 Dimensions 268 mm (W) x 84.4 mm (H) x 221 mm (D) (Excluding extrusions) Ceiling mount installation MENU EXIT 221 84.4 268 55 1 10.05 81.5 81.5 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) Unit: mm ...

  • Viewsonic PJD5234 - page 66

    61 T iming chart Supported timing for PC input Resolution Horiz onta l Frequency (kHz) Ve r t i c a l Frequency (Hz) Pixel Frequency (MHz) Mode 720 x 400 31.469 70.087 28.3221 720 x 400_70 640 x 480 31.469 59.94 25.175 VGA_60 37.861 72.809 31.5 VGA_72 37.5 75 31.5 VGA_75 43.269 85.008 36 VGA_85 61.91 1 19.518 52.5 VGA_12 0 800 x 600 35.156 56.250 3 ...

  • Viewsonic PJD5234 - page 67

    62 Supported timing for Component-YP b P r input Displaying a 1080i(1 125i)@60Hz or 1080i(1 125i)@50Hz signal may result in slight image vibration. Supported timing for V ideo and S-V ideo inputs Signal Format Horizontal Frequency (kHz) V ertical Frequency (Hz) 480i(525i)@60Hz 15.73 59.94 480p(525p)@60Hz 31.47 59.94 576i(625i)@50Hz 15.63 50.00 576p ...

  • Viewsonic PJD5234 - page 68

    63 Copyright information Copyright Copyright 2012. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without th e prior ...

  • Viewsonic PJD5234 - page 69

    64 Appendix IR contr ol table Code A Key Format By te1 Byte2 Byte3 Byte4 Power NEC 83 F4 17 E8 A u t o S y n c N E C 8 3F 40 8F 7 VGA NEC 83 F4 41 BE V i d e o N E C 8 3F 45 2 A D S o u r c e N E C 8 3F 40 4F B Color Mode NEC 83 F4 10 EF Up / KeyS + NEC 8 3 F4 0B F4 Left NEC 83 F4 0E F1 Enter NEC 83 F4 15 EA Right NEC 83 F4 0F F0 Down / KeyS - NEC ...

  • Viewsonic PJD5234 - page 70

    65 Code B RS232 command table <Pin assignment for this two end> Key Format By te1 Byte2 Byte3 Byte4 P o w e r N E C 8 3F 46 09 F Auto Sync NEC 83 F4 63 9C VGA NEC 83 F4 64 9B V i d e o N E C 8 3F 46 6 9 9 Source NEC 83 F4 7D 82 Color Mode NEC 83 F4 9E 61 Up / KeyS + NEC 8 3 F4 67 98 L e f t N E C 8 3F 46 99 6 Enter NEC 8 3 F4 6B 94 Right NEC ...

  • Viewsonic PJD5234 - page 71

    66 <Interface> <RS232 command table> RS-232 protocol Baud Rate 1 15200 bps (default) Data Length 8 bit Parity Check None S top Bit 1 bit Flow Control None Function S tatus Action cmd Power Write Turn on 0x06 0x14 0x00 0x04 0x00 0x34 0x1 1 0x00 0x00 0x5D Turn of f 0x06 0x14 0x00 0x04 0x00 0x34 0x1 1 0x01 0x00 0x5E Read Power status (on/o ...

  • Viewsonic PJD5234 - page 72

    67 Projector Position Write Front T able 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x00 0x5E Rear T able 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x01 0x5F Rear Ceiling 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x02 0x60 Front Ceiling 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x00 0x03 0x61 Read Projector position status 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 ...

  • Viewsonic PJD5234 - page 73

    68 Color temperature Write Color temperatureT1 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x00 0x66 Color temperatureT2 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x01 0x67 Color temperatureT3 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x02 0x68 Color temperatureT4 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x08 0x03 0x69 Read Color temperature status 0x07 0x14 0x0 ...

  • Viewsonic PJD5234 - page 74

    69 Source input Write Input source VGA 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x00 0x60 Input source VGA2 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x08 0x68 Input source Composite 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x05 0x65 Input source SVIDEO 0x06 0x14 0x00 0x04 0x00 0x34 0x13 0x01 0x06 0x66 Input source HDMI 0x06 0x14 0x00 0x04 0x00 0x34 0x ...

  • Viewsonic PJD5234 - page 75

    70 Language Write 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x01 0x62 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x02 0x63 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x03 0x64 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x04 0x65 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x05 0x66 0x06 0x14 0x00 0x04 0x00 0x34 0x ...

  • Viewsonic PJD5234 - page 76

    71 Customer Support For technical support or product service, see the table below or contact your reseller . Note : Y ou will need the product serial number . Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free ...

  • Viewsonic PJD5234 - page 77

    72 Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the p ...

  • Viewsonic PJD5234 - page 78

    73 How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to “Customer Support” page). You will need to provide your product’s serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your addres ...

  • Viewsonic PJD5234 - page 79

    74 Mexico Limited Warranty ViewSonic ® Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replac ...

  • Viewsonic PJD5234 - page 80

    75 Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av . de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México T el: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO ...

Manufacturer Viewsonic Category Video projector

Documents that we receive from a manufacturer of a Viewsonic PJD5234 can be divided into several groups. They are, among others:
- Viewsonic technical drawings
- PJD5234 manuals
- Viewsonic product data sheets
- information booklets
- or energy labels Viewsonic PJD5234
All of them are important, but the most important information from the point of view of use of the device are in the user manual Viewsonic PJD5234.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Viewsonic PJD5234, service manual, brief instructions and user manuals Viewsonic PJD5234. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Viewsonic PJD5234.

Similar manuals

A complete manual for the device Viewsonic PJD5234, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Viewsonic PJD5234 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Viewsonic PJD5234.

A complete Viewsonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Viewsonic PJD5234 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Viewsonic PJD5234, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Viewsonic PJD5234, that we can find in the current document
3. Tips how to use the basic functions of the device Viewsonic PJD5234 - which should help us in our first steps of using Viewsonic PJD5234
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Viewsonic PJD5234
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Viewsonic PJD5234 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Viewsonic PJD5234?

Use the form below

If you did not solve your problem by using a manual Viewsonic PJD5234, ask a question using the form below. If a user had a similar problem with Viewsonic PJD5234 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)