English dropdown-ico

Manual Cecilware GB-IT

34 pages 1.82 mb
Download

Go to site of 34

Summary
  • Cecilware GB-IT - page 1

    OPERA TION MANUAL • Specificat ions...................................................... 2 • Installation and Oper ating Instructions.............. 4 • Adjustme nts......................................................... 6 • Programming Inst ructions................................. 8 • Care and Main tenance............................. ...

  • Cecilware GB-IT - page 2

    2 ELECTRICAL SPECIFICATIONS Model No. Volts Phase Hz Watts Number of Heaters Amps Receptacle Nema No. Circuit Breaker ALL MODELS 120V 1 60 1.8KW 1 15 5-15R 15A ALL MODELS 120/240V 1 60 3.0KW 1 15 L14-20R** 20A ALL EXPORT MODELS 220V 1 60 3.0KW 1 15 †† 20A GB 3 M-5.5-IT, GB 4 M-5.5-IT 120/240V 1 60 6.0KW 2 25 L14-30R** 30A 120V, 1.8 KW, 15A, Nem ...

  • Cecilware GB-IT - page 3

    3 START-UP PROCEDURE 1. Connect the ¼" dia. copper waterline to the ¼" flare water inlet fitting of the valve. 2. Plug the power cord into a proper receptacle. 3. Activate the Power Switch (Toggle Up) located on the right side of the splash panel below the door. The power switch controls all power to the machine including the heater ele ...

  • Cecilware GB-IT - page 4

    4 GB3M-5.5-IT DIMENSIONS & CONP ONENTS LOCATION - ILL. A DRIP TRAY FRONT VIEW DRIP TRAY DISPENSE BUTTON (9) PRODUCT LABEL LABEL AREA DRIP TRAY DISPENSE VALVE NA88A 5.5 LB 5.5 LB 5.5 LB POWER CORD WATER IN LET VALVE WATER LE VEL PROBE POWER SWITCH TANK ASS' Y HEATER ELEMENT CORD SET MAIN CONTROL BOARD THERMISTER PROBE TOUCH PAD LCD BOARD RI ...

  • Cecilware GB-IT - page 5

    5 ADJUSTMENTS - ILL. B WATER FLOW RATE The Dispense Valves are factory adjusted fo r a maximum Flow Rate of 1 to 1.3 oz./sec . [Approximate settings: 0.85 to 1 oz./sec for SOUP ; 1.3 oz./sec. for COFFEE and CAPPUCCINO ] Exceeding this Flow Rate will cause the Mixing Chamber to overflow. Note: To access the Water Dispense Valves, open door and remov ...

  • Cecilware GB-IT - page 6

    6 Features and Benefits of the Digital Dispenser Controller 1. 100% Solid State Control for improved reliability 2. Modular design and reduced component count for ease of service 3. Optional sanitary features such as Rinse Lockouts and Rinse Warnings 4. Redundant system interlocks for uncompromising user safety 5. Large two line display for viewing ...

  • Cecilware GB-IT - page 7

    7 PARAMETER DEFINITIONS FOR SYSTEM SOFTWARE VERSION 1.11 1. Grand Total – This parameter indicates the total amount of water dis pensed (in ounces or milliliters) fo r the entire machine. The Grand Total does not include Rinse Dispenses. The maximum Grand Tota l value is 16,777,216 ounces; after which the value will begin a gain from zero. This p ...

  • Cecilware GB-IT - page 8

    8 13. Rinse Warning Status – This parameter determines whether the Rinse Warning Option is turned ON or OFF. If this option is ON the system generates a Rinse Warning if a Hopper has dispensed and has not been Rinsed for of time greater than that defined by (50 * Rinse Lockout Time) minutes. For example: If the Rinse Warning Status is ON and the ...

  • Cecilware GB-IT - page 9

    9 GR EE N – DISP ENSE B U TTON RED – L ED BLI NKI N G L IGH TS To dec re ase or inc re ase par ame te rs To a c c es s SER VI CE MODE – Pres s si m ulta neo u sly Cen ter o f C ECI LW ARE LO GO and Cen ter o f F AS T FL OW LOG O T o ac ce ss P RO G RA M MO DE – P r e ss s im u ltan e ous l y RI NS E a nd S T OP PLE AS E S E LE CT D RIN K… ...

  • Cecilware GB-IT - page 10

    10 PROGRAM MODE General Conventions (unless otherwise indicated) 1. To enter or exit Program Mode simultaneously depress both the Rinse key and the Stop key until the buzzer sounds (approximately 1.5 seconds). 2. Pressing the Stop key will cause the menu to scroll up and pressing the Rinse key will cause the menu to scroll down. 3. The blinking LED ...

  • Cecilware GB-IT - page 11

    11 13. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Gram Throw for the indicated Hopper as follows: GRAM THROW ### 14. Pressing ▼ or ▲ key will decrease or increase the Gram Throw respectively. 15. If the Stop key is pressed the LCD/VFD screen will ...

  • Cecilware GB-IT - page 12

    12 11. If the Stop key is pressed the LCD/VFD screen will display the following: GRAM THROW SELECT A KEY 12. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding Hopper to blink and the LCD/VFD screen will display the Gram Throw for the indicated Hopper as follows: GRAM THROW ### 13. If the Stop key is pressed the L ...

  • Cecilware GB-IT - page 13

    13 27. If the Stop key is pressed the LCD/VFD screen will display the following: RINSE LOCKOUT ## HRS. 28. If the Stop key is pressed the LCD/VFD screen will display the following: WATER TEMP. ### DEG F 29. If the Stop key is pressed the LCD/VFD screen will display the following: TEMP LOCKOUT ON TEMP LOCKOUT Off 30. If the ▼ and ▲ keys are pres ...

  • Cecilware GB-IT - page 14

    14 DEFINITION OF SCREENS DURING NORMAL OPERATION: 1. Initialization Screen Definition – This screen is displayed only during the fi rst few seconds after “power-on”. The only purpose of this screen is to display the System Softwar e Title (DISPENSER) and Version Number (V #.##). RESET SYSTEM COMPLETED 2. Low Water Level Screen Definition – ...

  • Cecilware GB-IT - page 15

    15 DEFINITION OF ERROR SCREENS AND TROUBLESHOOTING IF ANY OF THESE ERROR SCREENS COME UP ALSO CHECK THE SAFETY RELAY IN ADDITION TO THE COMPONENT IN QUESTION. SEE RELAY TEST. 1. Over Temperature Error Screen Definition – This screen is displayed and the system is shut down when the present water temperature is sensed higher than 208 °F. SYSTEM E ...

  • Cecilware GB-IT - page 16

    16 Note : IF either the Auger Motor, or Mixer Motor, or Solenoi d Error Screen appear: The entire system is inoperable this means that one of either the Auger Motor, or Mixer Motor, or Solenoid [Dispense Valve] is not functional while that Hopper Status in ON. To continue operating the other Hoppers: Go into Program Mode [by pressing simultaneously ...

  • Cecilware GB-IT - page 17

    17 RECOMMENDED PREVENTIVE MAINTENANCE 1. CHECK ALL DISPENSE VALVES FOR LIME BUILD-UP. •Drain The Water Tank To Just Belo w The Level Of The Dispense Valves. •Remove The Valves And Clean. ( You Can Take These Valves Apart By Hand As Shown). •Replace The Assembly As Needed (L467A). •Replace The Valve Into The Tank And Refill tank. 2. CHECK AL ...

  • Cecilware GB-IT - page 18

    18 PICTURE / DURATRAN REPLACEMENT and BULB AND STARTER REPLACEMENT - ILL. D To Replace The Picture / Duratran: Lift up the two end tabs on top of door with a pointed object or flat head screwdriver. Pull the entire picture frame out. Open up t he two clear panels and replace picture. Tuck clear plastic panel inside bracket at top. BE SURE TO TUCK C ...

  • Cecilware GB-IT - page 19

    19 SANITIZING, CLEANING AND REFILLING HOPPERS Sanitizing: All food dispensing units should be sanitized periodically . All parts to be sanitized must be cleaned first. To prepare a sanitizing solution: ADD 2 TSP. OF LIQUID CLOROX BLEACH (5.25% CONCENTRATION) TO 1 GALLON OF WATER AT ROOM TEMPERATURE (70°- 90°F). Note: Always start with a unopened ...

  • Cecilware GB-IT - page 20

    20 HOPPER and DISPENSING CHAMBER ASS'YS WITH WIRE AUGERS - ILL. E EXTENSION TUBE M467A HOPPER CD152 MIXING CHAM. CD1 37 WHIP CHAM. CD6 3A HOPPER CD98A HOPPER COVER CD106 HOPPER CD144 WHIPPER BLADE CD14 3 or CD64A WHIPPER BLAD E CD143 or CD64A ...

  • Cecilware GB-IT - page 21

    21 HOPPER and DISPENSING CHAMBER ASS'Y WITH NYLON AUGERS - ILL. E HOPPER ASS'Y CD104, 7 LB, 18"HIGHT x 3"W, W/NYLON AUGER HOPPER ASS'Y CD120, 5.5 LB, 14"HIGHT x 3" W, W/NYLON AUGER HOPPER ASS'Y CD68A, 4 LB, 11.5"HIGHT x 3" W, W/NYLON AUG ER HOPPER ASS'Y CD313, 1 LB COFFEE, 7.875" H IGHT x ...

  • Cecilware GB-IT - page 22

    22 TROUBLESHOOTING GUIDE WARNING: To reduce the risk of electrical shock unplug the dispen ser power cord before repairing or replacing any internal components of the unit.. Before any attempt to replace a com ponent be sure to check all electrical connections for proper contact PROBLEM PROBABLE CAUSE REMEDY 1. Li g ht Displa y not lit. No power. a ...

  • Cecilware GB-IT - page 23

    23 15. Noise coming from mixing chamber a) Whipper blade not properly aligned or missing. a) Check blade alignment, if needed replace blade and mixing chamber. 16. Grinding noise coming from unit a) Hopper not properly engaged in back, or Hopper not seated properly a) Check the mating between the auger motor’s gear and hopper’s coupling/nut. Ch ...

  • Cecilware GB-IT - page 24

    24 17 18 16 13 14 12 19 20 11 1 10 9 8 15 6 7 2 3 4 5 21 DOOR ASS’Y WITH COMPONENTS (G B3M5.5 IT SHOWN) ILL. G ITEM DESCRIPTION GB1/2M5.5-IT GB3M-5.5-IT GB3M-10-IT GB4M / 5M-IT 1 CLEAR WINDOW PANEL [1/8”] M774A M673A M673A M703A 2 PICTURE / DURATRAN FRAME ASS’Y SB98Q RX48Q RX48Q RZ91A 3 DOOR ASSEMBLY - RIGHT HINGED DOOR / LEFT HINGED DOOR SN0 ...

  • Cecilware GB-IT - page 25

    25 DESCRIPTION AND LOCATION OF COMPONENTS (GB3M5.5 IT SHOWN) ILL. H 42 41 9 12 11 4 5 7 6 8 16 20 19 18 21 22 24 25 23 28 27 26 30 29 33 31 32 2 3 1 35 15 10 13 14 40 39 37 36 34 38 17 ...

  • Cecilware GB-IT - page 26

    26 GBM-5.5-IT COMMON PARTS IDENTIFICATION LIST ITEM DESCRIPTION GB1/2M5.5-IT GB3M-5.5-IT GB3M-10-IT GB4/5M-IT 1 TANK TOP ASS;Y -– FOR DETAILS SEE ILL.F SC32A RY98Q RY98Q RJ86Q 2 TANK WELDMENT ASS’Y – FOR DETAILS SEE ILL.F RJ83Q RI38Q RI38Q RJ85Q 3 THERMISTER ASS’Y [FOR HI-TEMP. & WATER OVERFLOW] ] L700Q L700Q L700Q L700Q 4 CHECK VALVE [ ...

  • Cecilware GB-IT - page 27

    27 ...

  • Cecilware GB-IT - page 28

    28 ...

  • Cecilware GB-IT - page 29

    29 ...

  • Cecilware GB-IT - page 30

    30 ...

  • Cecilware GB-IT - page 31

    31 ...

  • Cecilware GB-IT - page 32

    32 ...

  • Cecilware GB-IT - page 33

    33 USING OLDER VERSION OF TOUCH PAD WITH ONE RIBBON CONNECTOR ...

  • Cecilware GB-IT - page 34

    34 USING OLDER VERSION OF TOUCH PAD WITH ONE RIBBON CONNECTOR ...

Manufacturer Cecilware Category Hot Beverage Maker

Documents that we receive from a manufacturer of a Cecilware GB-IT can be divided into several groups. They are, among others:
- Cecilware technical drawings
- GB-IT manuals
- Cecilware product data sheets
- information booklets
- or energy labels Cecilware GB-IT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cecilware GB-IT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cecilware GB-IT, service manual, brief instructions and user manuals Cecilware GB-IT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cecilware GB-IT.

Similar manuals

A complete manual for the device Cecilware GB-IT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cecilware GB-IT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cecilware GB-IT.

A complete Cecilware manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cecilware GB-IT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cecilware GB-IT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cecilware GB-IT, that we can find in the current document
3. Tips how to use the basic functions of the device Cecilware GB-IT - which should help us in our first steps of using Cecilware GB-IT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cecilware GB-IT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cecilware GB-IT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cecilware GB-IT?

Use the form below

If you did not solve your problem by using a manual Cecilware GB-IT, ask a question using the form below. If a user had a similar problem with Cecilware GB-IT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)