English dropdown-ico

Manual Heath Zenith SH-5311

20 pages 0.41 mb
Download

Go to site of 20

Summary
  • Heath Zenith SH-5311 - page 1

    Cov er Plate Sensor Light Control Cov er Plate Gasket © 2008 HeathCo LLC 598-1343-00 Requirements • The light control requires 120-v olts A C. • This fixture is designed f or wall mounting only . • If you w ant to use Manual Override, the control must be wired through a s witch. • Some codes require installation by a qualified electricia ...

  • Heath Zenith SH-5311 - page 2

    2 598-1343-00 Cov er Plate Gasket ❒ Drill out the holes if needed to mount the backplate to the junction bo x. White to White ❒ Attach the lamp ar m to the bac kplate ar m and secure with the long bolt. Not e: Whe n tight enin g the arm sc re w , pul l on the wire s to ma k e sure the wires are not pinched by the joint. ❒ Remove the e xist ...

  • Heath Zenith SH-5311 - page 3

    3 598-1343-00 +/- 4° Mount the Light Contr ol ❒ Align the light control cov er plate and cov er plate gasket and the junction box. Insert and tighten the mounting screws . ❒ If not instal led on a weatherproof bo x or if an adaptor plate is used, caulk the wall plate and mounting surface with silicone weather sealant. The halogen light must be ...

  • Heath Zenith SH-5311 - page 4

    4 598-1343-00 TEST AND ADJUSTMENT ❒ T urn on the circuit breaker and light switch. NO TE: Sensor has about 1 1 / 2 min utes warm up period bef ore it will detect motion. When first turned on, wait about 1 1 / 2 minutes . ❒ T urn the RANGE control to the mid position (halfwa y between MIN and MAX) and the ON-TIME control to the TEST position. A ...

  • Heath Zenith SH-5311 - page 5

    5 598-1343-00 TR OUBLESHOO TING GUIDE SYMPT OM POSSIBLE CA USE SOLUTION Light will not come on. 1. Light switch is turned off. 2. Lamp is loose or bur ned out. 3. Fuse is blown or circuit breaker is turned off. 4. Daylight turn-off is in effect. 5. Incorrect circuit wir ing, if this is a new installation. 6. Light control aimed in wrong direction. ...

  • Heath Zenith SH-5311 - page 6

    6 598-1343-00 TECHNICAL SER VICE Please call 1-800-858-8501 (English speaking only) f or assistance bef ore returning product to store. If you e xperience a prob lem, follo w this guide. Y ou ma y also want to visit our Web site at: www .hzsupport.com. If the problem persists , call* for assistance at 1-800-858-8501 (English speaking only) , 7:30 A ...

  • Heath Zenith SH-5311 - page 7

    7 598-1343-00 Control de Luz Requisitos • El control de luz requiere 120 VCA. • E s t e a pa ra to e st á di se ña do s ól o pa ra m on ta je e n pa re d. • P ara usar el Sobrecontrol Manual, conecte el control con un interruptor . • Algunos códigos requieren instalación por un electricista calificado. • E st e pr od u ct o pu ed e ...

  • Heath Zenith SH-5311 - page 8

    8 598-1343-00 Empaquetadura ❒ Quite el aparato de luz existente. ❒ El gancho en S puede ser usado para sostener el aparato mientras se pone el cableado . Se puede inser tar el extremo pequeño del gancho en el agu- jero de la caja de empalmes . El e xtremo grande va alrededor del “cuello” del aparato . ❒ Meta los alambres del control de l ...

  • Heath Zenith SH-5311 - page 9

    9 598-1343-00 Instalación y cambio de bombilla ❒ Cuando cambie la bombilla, apague la energía y deje que el aparato se enfríe . La luz halógena no debe brillar hacia abajo en nin- guna par te del detector y debe estar por lo menos a una pulgada del detector y debe ser montado hori- zon-talmente (+/- 4°). MONTELO HORIZONT ALMENTE Instale el c ...

  • Heath Zenith SH-5311 - page 10

    10 598-1343-00 PR UEB A Y AJUSTE ❒ Pre nda el cortac ir cui tos y e l in ter rupt or d e l uz. NO T A: El de tect or tie ne un per íodo de cerca de 1 1 / 2 minutos de calentamiento antes de detectar movimiento . Cuando lo prenda por pr imera vez, espere 1 1 / 2 min utos. ❒ Gire el control RANGE a la posición media (entre MIN y MAX) y el contr ...

  • Heath Zenith SH-5311 - page 11

    11 598-1343-00 SPECIFICA TIONS Alcance . . . . . . . . . . . . . Hast a 21 m (varí a con la temperatura del medio am- biente). Angulo de detección . . . Hasta 180° Carga Eléctrica . . . . . . . Hasta 500 V atios Máximo de luz incandescente halógeno Requisitos de energía . . 120 VCA, 60 Hz F ases de Operación . . . PR UEBA, A UT OMA TICO, y ...

  • Heath Zenith SH-5311 - page 12

    12 598-1343-00 GARANTÍA LIMIT AD A A 10 AÑOS Esta es una “Gar antía Limitada” que le da a Ud. derechos legales específicos. Usted puede también tener otros derechos que v arían de estado a estado o de provincia a provincia. P or un período de 10 años desde la f echa de compra, cualquier mal funcionamiento ocasionado por par tes def ect ...

  • Heath Zenith SH-5311 - page 13

    13 598-1343-00 Ampoule quar tz-halogène Plaque de garde Détecteur Commande d’éclairage • Ce produit doit être utilisé av ec la gar niture incluse et av ec une boîte de jonction destinée aux endroits mouillés. • La plaque arrière compor te des débouchures pour que le détecteur puisse être monté sur la plupar t des boîtes de jonct ...

  • Heath Zenith SH-5311 - page 14

    14 598-1343-00 ❒ Enle ver l’appareil d’éclair age existant. ❒ Le crochet en S peut être utilisé pour suppor ter le luminaire pendant le câblage. Le petit bout du crochet peut être inséré dans un trou de la boîte de jonction. Le gros bout est destiné au «cou» du luminaire. ❒ Insérer les câbles de la commande d’éclairage à ...

  • Heath Zenith SH-5311 - page 15

    15 598-1343-00 Montage De La Commande D’Éc lairage ❒ Aligner la plaque de garde de la commande d’éclai- rage et le joint à la plaque d’adaptation (s’il y a lieu) av ec la boîte de jonction. Insérer et serrer les vis de montage. ❒ Si elle n’est pas montée dans un boîter étanche ou si une plaque d’adaptation est utilisée, cal ...

  • Heath Zenith SH-5311 - page 16

    16 598-1343-00 RANGE 10 5 1 TEST ON-TIME MAX MIN RANGE ON-TIME 10 5 1 TEST MINUTES MIN MAX 180° ESSAIS ET RÉGLA GES ❒ Mettre en cir cuit le disjoncteur et l’interrupteur d’éclaira ge . NO TE: Le capteur doit se réchauff er 1 1 / 2 minute avant de pouv oir détecter le mouvement. Lorsque l’appareil est mis en circuit, attendre 1 1 / 2 mi ...

  • Heath Zenith SH-5311 - page 17

    17 598-1343-00 GUIDE DE DÉP ANNA GE FICHE TECHNIQUE P or tée . . . . . . . . . . . . . Jusqu’à 21 m (varie selon la température en vironnante) Angle de détection . . . . Jusqu’à 180˚ Charge électrique . . . . Jusqu’à 500 W atts Maximum, halogène Courant requis . . . . . . . 120 V c.a., 60 Hz. Modes de f onctionnement . . . . . . Ess ...

  • Heath Zenith SH-5311 - page 18

    18 598-1343-00 GARANTIE LIMITÉE DE 10 ANS Il s’agit d’une « Garantie limitée » qui v ous confère des droits jur idiques spécifiques. V ous pouvez également jouir d’autres droits, v ariables d’une province à l’autre . P endant une période de 10 ans à compter de la date d’achat, toute anomalie de f onctionnement imputab le à u ...

  • Heath Zenith SH-5311 - page 19

    19 598-1343-00 Notes / Notas _________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ _____________________________ ___ ...

  • Heath Zenith SH-5311 - page 20

    20 598-1343-00 Staple Pur chase Receipt Here Engrape aquí el recibo de compra Agrafez le reçu d’ac hat ici PLEASE KEEP Y OUR D A TED SALES RECEIPT , IT IS REQUIRED FOR ALL W ARRANTY REQUESTS. POR F A V OR GU ARDE SU RECIBO DE VENT A FECHADO; SE LO REQUIERE P ARA CU ALQUIER SOLICITUD DE GARANTÍA. VEUILLEZ CONSER VER LE REÇU PORT ANT LA D A TE ...

Manufacturer Heath Zenith Category Work Light

Documents that we receive from a manufacturer of a Heath Zenith SH-5311 can be divided into several groups. They are, among others:
- Heath Zenith technical drawings
- SH-5311 manuals
- Heath Zenith product data sheets
- information booklets
- or energy labels Heath Zenith SH-5311
All of them are important, but the most important information from the point of view of use of the device are in the user manual Heath Zenith SH-5311.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Heath Zenith SH-5311, service manual, brief instructions and user manuals Heath Zenith SH-5311. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Heath Zenith SH-5311.

Similar manuals

A complete manual for the device Heath Zenith SH-5311, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Heath Zenith SH-5311 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Heath Zenith SH-5311.

A complete Heath Zenith manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Heath Zenith SH-5311 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Heath Zenith SH-5311, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Heath Zenith SH-5311, that we can find in the current document
3. Tips how to use the basic functions of the device Heath Zenith SH-5311 - which should help us in our first steps of using Heath Zenith SH-5311
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Heath Zenith SH-5311
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Heath Zenith SH-5311 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Heath Zenith SH-5311?

Use the form below

If you did not solve your problem by using a manual Heath Zenith SH-5311, ask a question using the form below. If a user had a similar problem with Heath Zenith SH-5311 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)