English dropdown-ico

Manual Addonics Technologies ST4SAML

8 pages 2.25 mb
Download

Go to site of 8

Summary
  • Addonics Technologies ST4SAML - page 1

    Addonics T E C H N O L O G I E S Storage Tower ST4IDEU2, ST4SAML, ST5X1PM, ST5XHPM, ST4US, ST4ESA, ST6ESA, ST5ESAIUS, STMPC, STBTO ST4IDEU2 - B, ST4SAML - B, ST5X1PM - B, ST5XHPM - B, ST4US - B, ST4ESA - B, ST6ESA - B, ST5ESAIUS - B, STMPC -B User’s Guide Version 1.0 FCC Warning Statement This equipment has been tested and found to comply with th ...

  • Addonics Technologies ST4SAML - page 2

    Model: ST4US Model: ST4IDEU2 Model: ST5X1PM ...

  • Addonics Technologies ST4SAML - page 3

    Storage Tower Preparation Sample Inst allation on the tower using IDE hard drives • Remove the side panel screws. • Slide the side panel towards the backside then pull or lift to open. • To remove the front face panels, unscrew 2 screws on opposite sides of the 5 ¼” drive bay on the tower • This picture shows the storage tower without bo ...

  • Addonics Technologies ST4SAML - page 4

    Tower with USIB connector • Any IDE or ATAPI Storage device can be converted to USB or Firewire connection via the Addonics USIB interface board and USIB interface c able. • IDE and ATAPI drives must be set as Master device. USIB back panel Inside of the USIB back panel IDE Device Installation to the USIB Connector The USIB setup can do hot swa ...

  • Addonics Technologies ST4SAML - page 5

    Tower with eSATA connector For SATA connection, hot swap feature depends on the controller. All Addonics SATA controllers support the hot swap feature. eSATA and USIB back panel Tower with Port Multiplier Hot swap feature depends on the SATA controller. All Addonics SATA controllers support the hot swap feature. Port Multiplier does not work with S ...

  • Addonics Technologies ST4SAML - page 6

    Tower with Hardware Port Multiplier Note: You need to install the SiI 4726 Manager on your system to configure RAID sets. RAID configuration is programmed by connecting the hardware port multiplier: • to one of Addonics’ SATA controllers that has SIL3124 or SIL3132 chip set. • via USB 2.0 connection (optional Addonics eSATA - USB adapter is r ...

  • Addonics Technologies ST4SAML - page 7

    Tower with Multilane Connector Hot swap feature depends on the SATA controller. All Addonics SAT A controllers support the hot swap feature. Check with your system supplier to confirm the existing SATA port on your system supports hot swap feature. Note: It is important that you have configured your Multilane Host contro ller before connecting it t ...

  • Addonics Technologies ST4SAML - page 8

    Technical Support If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help ...

Manufacturer Addonics Technologies Category Portable Media Storage

Documents that we receive from a manufacturer of a Addonics Technologies ST4SAML can be divided into several groups. They are, among others:
- Addonics Technologies technical drawings
- ST4SAML manuals
- Addonics Technologies product data sheets
- information booklets
- or energy labels Addonics Technologies ST4SAML
All of them are important, but the most important information from the point of view of use of the device are in the user manual Addonics Technologies ST4SAML.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Addonics Technologies ST4SAML, service manual, brief instructions and user manuals Addonics Technologies ST4SAML. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Addonics Technologies ST4SAML.

Similar manuals

A complete manual for the device Addonics Technologies ST4SAML, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Addonics Technologies ST4SAML by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Addonics Technologies ST4SAML.

A complete Addonics Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Addonics Technologies ST4SAML - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Addonics Technologies ST4SAML, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Addonics Technologies ST4SAML, that we can find in the current document
3. Tips how to use the basic functions of the device Addonics Technologies ST4SAML - which should help us in our first steps of using Addonics Technologies ST4SAML
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Addonics Technologies ST4SAML
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Addonics Technologies ST4SAML in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Addonics Technologies ST4SAML?

Use the form below

If you did not solve your problem by using a manual Addonics Technologies ST4SAML, ask a question using the form below. If a user had a similar problem with Addonics Technologies ST4SAML it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)