English dropdown-ico

Manual Audiovox PRO-9776C

12 pages 0.13 mb
Download

Go to site of 12

Summary
  • Audiovox PRO-9776C - page 1

    128-8786 1 of 12 Page 1 Model PRO-9776C Owner ’s Manual 5 Button Remote Start Security System With Plug-In Shock Sensor & Starter Disable FEA TURES:  2 Five Button Programmable RF Transmitters  Seven Channel Code Learning Receiver (capable of accepting 4 transmitters)  Code Hopping T echnology  Selectable Manual Override Mode  ...

  • Audiovox PRO-9776C - page 2

    128-8786 2 of 12 Page 2 Y our Remote S tart Alarm System has many features and available options some of which are selected at time of installation. For your reference, the list on page 9 of this manual shows what features and options have been installed. Consult your installing dealer for options that may have been installed and are not listed. YO ...

  • Audiovox PRO-9776C - page 3

    128-8786 3 of 12 Page 3 when arming, then the chirps have been turned off and you should refer to the section titled "ELIMINA TING THE ARM/DISARM CHIRPS" in this manual. ARMING THE SYSTEM - P ASSIVE (AUTOMA TIC) If the passive arming feature has been selected: 1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk. ...

  • Audiovox PRO-9776C - page 4

    128-8786 4 of 12 Page 4 If the siren did not sound upon disarm, then the chirps have been turned off. Refer to the section titled ELIMINA TING THE ARM/DISARM CHIRPS. NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter button is activated, the drivers door only will unlock, pressing the unlock button a second t ...

  • Audiovox PRO-9776C - page 5

    128-8786 5 of 12 Page 5 mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational. T o use the valet mode, the system must first be disarmed either by using your keychain transmitter , or by activating your personalized manual override code. 1 . Ente ...

  • Audiovox PRO-9776C - page 6

    128-8786 6 of 12 Page 6 NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more than 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code. Custom Code Programming Example: T o Change the code from the factory pre-assigned code of 1 1 to “52” you would do the f ...

  • Audiovox PRO-9776C - page 7

    128-8786 7 of 12 Page 7 4. If the chirps were on before you started, the siren will emit 2 short chirps indicating that the chirps are now off. If the chirps were off before you started, the siren will emit one short chirp indicating that the chirps are now on. NOTE: If the vehicle battery is disconnected then reconnected, the unit will return to t ...

  • Audiovox PRO-9776C - page 8

    128-8786 8 of 12 Page 8 3) Be certain your foot is off the brake pedal. 4) Press the receiver's program/Push-Button switch 2 times within 5 seconds. The parking lights will flash two times indicating the mode was successfully entered. If your parking lights flashed four times, this indicates the turbo mode was on and is now turned off. With th ...

  • Audiovox PRO-9776C - page 9

    128-8786 9 of 12 Page 9 W ARNING ! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is garaged. TO BEGIN THE AUTOMA TIC ST ART UP TIMER 1. Turn th ...

  • Audiovox PRO-9776C - page 10

    128-8786 10 of 12 Page 10  Remote Trunk Release  Remote Window Closure  Rear Hatch Release  Right Or Left Slider Doors in An Equipped V an T o activate the optional accessory , press the option button on the keychain transmitter . The optional accessory will immediately engage. ADDITIONAL REMOTE FUNCTION (CHANNEL 6) This system has an a ...

  • Audiovox PRO-9776C - page 11

    128-8786 11 of 12 Page 11 ...

  • Audiovox PRO-9776C - page 12

    128-8786 12 of 12 Page 12 ALARM DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH... P AUSE = INTRUSION ZONE 3 2 FLASH...P AUSE = INTRUSION ZONE 2 1 FLASH...P AUSE = INTRUSION ZONE 1 ALARM SIREN CHIRP INDICA TION 1 CHIRP* = ARM 2 CHIRPS* = DISARMED 3 CHIRPS = ARMING WITH ENTRY ...

Manufacturer Audiovox Category Automobile Alarm

Documents that we receive from a manufacturer of a Audiovox PRO-9776C can be divided into several groups. They are, among others:
- Audiovox technical drawings
- PRO-9776C manuals
- Audiovox product data sheets
- information booklets
- or energy labels Audiovox PRO-9776C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Audiovox PRO-9776C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Audiovox PRO-9776C, service manual, brief instructions and user manuals Audiovox PRO-9776C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Audiovox PRO-9776C.

Similar manuals

A complete manual for the device Audiovox PRO-9776C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Audiovox PRO-9776C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Audiovox PRO-9776C.

A complete Audiovox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Audiovox PRO-9776C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Audiovox PRO-9776C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Audiovox PRO-9776C, that we can find in the current document
3. Tips how to use the basic functions of the device Audiovox PRO-9776C - which should help us in our first steps of using Audiovox PRO-9776C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Audiovox PRO-9776C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Audiovox PRO-9776C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Audiovox PRO-9776C?

Use the form below

If you did not solve your problem by using a manual Audiovox PRO-9776C, ask a question using the form below. If a user had a similar problem with Audiovox PRO-9776C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (1)

Franco giussani

Dopo un prolungato inutilizzo ho trovato le lame bloccate del mio tagliasiepi B&D tipo GT4245 , come posso sbloccarle? il motore funziona ma le lame non si spostano. Grazie per eventuali consigli. F.Giussani