English dropdown-ico

Manual ZyXEL NBG6716

250 pages Not applicable
Download

Go to site of 250

Summary
  • ZyXEL NBG6716 - page 1

    Quick Start Guide www .zyxel.com NBG6716 Simultaneous Dual-Band Wireless AC1750 HD Media R outer V e rsion 1.00 Edition 1, 06/2013 Copyright © 2013 Z yXEL Communications Corpor ation User’s Guide Default Login Details LAN IP Address http://192.168.1.1 (Router Mode) http://192.168.1.2 (Access P oint Mode) P assword 1234 ...

  • ZyXEL NBG6716 - page 2

    NBG6716 User’s Guide 2 IMPORT ANT! READ CAREFULL Y BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Screenshots and graphics in this book may differ sl ightly from your product due to differences in your product firmware o r your computer operatin g system . Every ef fort has been m ade to ensure that the information in this manual is accurate. ...

  • ZyXEL NBG6716 - page 3

    Contents Overview NBG6716 User’s Guid e 3 Contents Overview User ’ s Guide .............................................................................. .................................... ..................... 13 Introduction ........... ............. ................ ................ ............. ................. ............ ............ ...

  • ZyXEL NBG6716 - page 4

    Contents Overview NBG6716 User’s Guide 4 ...

  • ZyXEL NBG6716 - page 5

    Table of Contents NBG6716 User’s Guid e 5 Table of Contents Contents Overview .............................................................................. ............................... ................. 3 Table of Contents ................................................. ..................................................... ........... ..... ...

  • ZyXEL NBG6716 - page 6

    Table of Contents NBG6716 User’s Guide 6 Chapter 4 NBG6716 Modes ................................................... ..................................................... ........... .............. 35 4.1 Overview ......................... ............. ................ ................. ............. ................ ............. . ............ ...

  • ZyXEL NBG6716 - page 7

    Table of Contents NBG6716 User’s Guid e 7 8.2 Set Up a Wireless Network wit h WPS .... ...... ....... ................ ............. ................ ............. .................... 65 8.2.1 Push Button Configuration (PBC) ....... ................. ............. ................ ................ ................ .... ... 65 8.2.2 PIN Configura ...

  • ZyXEL NBG6716 - page 8

    Table of Contents NBG6716 User’s Guide 8 1 1.3.3 WP A-PSK/WP A2-PSK ................................................................ ....................................... .. 103 1 1.3.4 WP A/WP A2 .... ................ ............. ................ ............. ................ ................ ............. .... ........... 104 1 1.4 More AP ...

  • ZyXEL NBG6716 - page 9

    Table of Contents NBG6716 User’s Guid e 9 14.5.5 T wo Points T o Remember About T r igger Ports .............. ................ ................ ................ ..... 136 Chapter 15 DDNS ....................................... .................................................................................... ....................... 137 15.1 Ov ...

  • ZyXEL NBG6716 - page 10

    Table of Contents NBG6716 User’s Guide 10 20.1 Overview ................. ................ ................ ............. ................ ............. ................ ...... .................... .. 161 20.2 What Y ou Can Do in this Chapter ........... ................ ................. ................ ............. ................ . ....... ...

  • ZyXEL NBG6716 - page 11

    Table of Contents NBG6716 User’s Guid e 11 23.9 Language Screen .......... ................. ............ ................. ................ ................ ................ .. ................ 187 23.10 System Operation Mode Overview .............. ................ ................ ............. ................ ............... ... 188 23.1 1 S ...

  • ZyXEL NBG6716 - page 12

    Table of Contents NBG6716 User’s Guide 12 ...

  • ZyXEL NBG6716 - page 13

    13 P ART I User ’ s Guide ...

  • ZyXEL NBG6716 - page 14

    14 ...

  • ZyXEL NBG6716 - page 15

    NBG6716 User’s Guid e 15 C HAPTER 1 Introduction 1.1 Overview This chapter introduces the main features and applications of the NBG6716. The NBG6716 extends the range of your existing wi red n etwork without additional wiring, providing easy network access to mobile users. Y ou can se t up a wireless network wi th other IEEE 802.11a/ ac/b/g/n com ...

  • ZyXEL NBG6716 - page 16

    Chapter 1 Introductio n NBG6716 User’s Guide 16 1.1.1 Dual-Band The NBG6716 is a dual-band AP and able to function both 2.4G and 5G networks at the same time. Y ou could use the 2.4 GHz band for regular Intern et surfing and downloading while using the 5 GHz band for time sensitive traffic like high-definition video, music, and gaming. Figure 2 D ...

  • ZyXEL NBG6716 - page 17

    Chapter 1 Introduction NBG6716 User’s Guid e 17 1.4 Good Habit s for Managing the NBG6716 Do the following things regularly to make the NBG6716 more secure and to manage the NBG6716 more effectively . • Change the password . Use a password that’ s not easy to guess and that consists of different types of characters, such as numbers and letter ...

  • ZyXEL NBG6716 - page 18

    Chapter 1 Introductio n NBG6716 User’s Guide 18 1 Make sure the power LED is on (not blinking). 2 Press the WPS button for more than three seconds and release it. Press the WPS button on anoth er WPS-enabled device within range of the NBG6716. Note: Y ou must activate WPS in the NBG6716 and in another wireless device within two minutes of each ot ...

  • ZyXEL NBG6716 - page 19

    Chapter 1 Introduction NBG6716 User’s Guid e 19 Figure 4 Front P anel The following table describes the LEDs and the WPS button. T a ble 1 Front panel LEDs and WPS button LED STATUS DESCRIPTION WPS Button Press this butt on for 1 second to set up a wireless connection via WiFi Protected Setup with another WPS-enabled client. Y ou must press the W ...

  • ZyXEL NBG6716 - page 20

    Chapter 1 Introductio n NBG6716 User’s Guide 20 1.8 W all Mounting Y ou may need screw anchors if mounting on a concrete or brick wall. 1 Select a position free of obstructions on a wall strong enough to ho ld the weight of the device. 2 Mark two holes on the wall at the appropriate distance apart for the screws. Be careful to avoid da maging pip ...

  • ZyXEL NBG6716 - page 21

    NBG6716 User’s Guid e 21 C HAPTER 2 Connection Wizard 2.1 Overview This chapter provides information on the wi zard setup screens in the W eb Configurator . The W eb Configurator’s wizard setup helps you configure your device to access the Internet. R efer to your ISP for y our Internet account information. Leave a field blank if you don’t ha ...

  • ZyXEL NBG6716 - page 22

    Chapter 2 Connection Wizard NBG6716 User’s Guide 22 Figure 6 We l c o m e 2.3 Connect to Internet The NBG6716 offers two Internet connection types. They are IPoE or PPPoE . The wizard attempts to detect which W AN connection type you are u sing. Figure 7 Detecting your Internet Connection T ype If the wizard does not detect a connection type, you ...

  • ZyXEL NBG6716 - page 23

    Chapter 2 Connection Wizard NBG6716 User’s Guid e 23 Note: If you ge t an error message , check yo ur hardware connections. Make sure your Internet connection is up and running. The following screen depends on your Internet conne ction type. Enter the details prov ided by your Internet Service Provider (ISP) in the fields (if any). Figure 8 Inter ...

  • ZyXEL NBG6716 - page 24

    Chapter 2 Connection Wizard NBG6716 User’s Guide 24 Figure 9 Internet Connection T ype: IP oE The following table describes the labels in this screen. Note: If you get an err or screen after clicking Next , you migh t have sel ect ed th e wron g Internet Connecti on type. Click Back , make s ure your I nte rnet con nect ion is working and select ...

  • ZyXEL NBG6716 - page 25

    Chapter 2 Connection Wizard NBG6716 User’s Guid e 25 One of the benefits of PPP oE is the ability to le t end users access one of multiple network services, a function known as dynamic service selection. This enables the service provider to easily create and offer new IP services for specific users. Operationally , PPPoE sa ves significant effort ...

  • ZyXEL NBG6716 - page 26

    Chapter 2 Connection Wizard NBG6716 User’s Guide 26 Figure 1 1 Connecting to the Internet Note: If th e Wizard success fully connects to the Intern et, it procee ds to the next step. I f you get an error message, go back to the previous screen and make sure you hav e entered the correct information pro vided by your ISP . 2.4 Router Password Chan ...

  • ZyXEL NBG6716 - page 27

    Chapter 2 Connection Wizard NBG6716 User’s Guid e 27 2.5 Wireless Security Configure Wireless Settings. Configure the wire less network settings on your NBG6716 in the following screen. The fields that show up depend on the kind of security y ou select. 2.5.1 Wireless Security: No Security Choose No Security in the Wireless Security screen to let ...

  • ZyXEL NBG6716 - page 28

    Chapter 2 Connection Wizard NBG6716 User’s Guide 28 2.5.2 Wireless Security: WP A2-PSK Choose WPA2-PSK security in the Wireless Security screen to set up a passwor d for your wireless network. Figure 14 Wireless Security: WPA2-PSK The following table describes the labels in this screen. Congratulations! Open a web browser , such as Inte rnet Expl ...

  • ZyXEL NBG6716 - page 29

    Chapter 2 Connection Wizard NBG6716 User’s Guid e 29 Note: If you cannot access the Internet when your computer is connected to one of the NBG6716’ s LAN ports, check your connection s. Then turn the NB G6716 off , wait for a few seconds then turn i t back on. If that does not work, log in to the web configurator again and check y ou have typed ...

  • ZyXEL NBG6716 - page 30

    Chapter 2 Connection Wizard NBG6716 User’s Guide 30 ...

  • ZyXEL NBG6716 - page 31

    NBG6716 User’s Guid e 31 C HAPTER 3 Introducing the Web Configurator 3.1 Overview This chapter describes how to access the NBG6716 W e b Configurator and provides an o verview of its screens. The W eb Configurator is an HTML -based management interface that allows easy setup and management of the NBG6716 via Internet browser . Use Internet Explor ...

  • ZyXEL NBG6716 - page 32

    Chapter 3 Introducing the Web Configurator NBG6716 User’s Guide 32 Figure 16 Login screen The following table describes the labels in this screen. 3.2.2 Password Screen Y ou should see a screen asking you to change your password (highly recommended) as shown next. Figure 17 Change Password Screen T a ble 8 Login screen LABEL DESCRIPTION Languag e ...

  • ZyXEL NBG6716 - page 33

    Chapter 3 Introducin g the Web Configurator NBG6716 User’s Guid e 33 The following table describes the labels in this screen. Note: The management session au tomatically ti mes out when the time period set in the Administrator Inactivity Timer field expires (default fiv e minutes; go to Chapter 23 on page 181 to change this). Simply log back int ...

  • ZyXEL NBG6716 - page 34

    Chapter 3 Introducing the Web Configurator NBG6716 User’s Guide 34 ...

  • ZyXEL NBG6716 - page 35

    NBG6716 User’s Guid e 35 C HAPTER 4 NBG6716 Modes 4.1 Overview This chapter introduces the different modes av aila ble on your NBG6716. First, the term “mode” refers to two things in this User’ s Guide. • Web Configurator mode . This refers to the W eb Configurator interface you want to use for editing NBG6716 features. • Device mode . ...

  • ZyXEL NBG6716 - page 36

    Chapter 4 NBG6716 Modes NBG6716 User’s Guide 36 ...

  • ZyXEL NBG6716 - page 37

    NBG6716 User’s Guid e 37 C HAPTER 5 Easy Mode 5.1 Overview The W eb Configurator is set to Easy Mode by default. Y ou can configure several k ey features of the NBG6716 in this mode. This mode is useful to us ers who are not fully familiar with some features that are usually intended for network administrators. When you log in to the W eb Configu ...

  • ZyXEL NBG6716 - page 38

    Chapter 5 Easy Mode NBG6716 User’s Guide 38 Figure 20 Easy Mode: Sta tus Screen 5.2 What Y ou Can Do Y ou can do the following in this mode: •U s e t h e Navigation Panel to opt out of the Easy Mode ( Se ction 5.4 on page 39 ). •U s e t h e Network Map screen to check whether your NBG6716 is connected to the Internet or any networking devices ...

  • ZyXEL NBG6716 - page 39

    Chapter 5 Easy Mode NBG6716 User’s Guid e 39 5.4 Navigation Panel Use this navigation panel to opt out of the Easy Mode . Figure 21 Control Panel The following table describes the labels in this screen. 5.5 Network Map When you log into the W eb Configurator , the Network Map is shown as follows. Figure 22 Network Map Y ou can view the upstream a ...

  • ZyXEL NBG6716 - page 40

    Chapter 5 Easy Mode NBG6716 User’s Guide 40 5.6 Control Panel The features configurable in Easy Mode are shown in the Control Panel . Figure 23 Control Panel Switc h ON to enable the feature. Otherwise, switch OF F . If the feature is turned on, the green light flashes. If it is turned off , the red light flashes. Additionally , click the feature ...

  • ZyXEL NBG6716 - page 41

    Chapter 5 Easy Mode NBG6716 User’s Guid e 41 Figure 24 Po w e r S av i n g The following table describes the labels in this screen. 5.6.2 Content Filter Use this screen to restrict access to certain websites, based on keywords contained in URLs, to which you do not w ant users in your network to open. T a ble 13 Pow e r S a vi n g LABEL DESCRIPTI ...

  • ZyXEL NBG6716 - page 42

    Chapter 5 Easy Mode NBG6716 User’s Guide 42 Figure 25 Content Filter The following table describes the labels in this screen. 5.6.3 Firewall Enable this feature to protect the network from Denial o f Service (DoS) attacks. The NBG6716 blocks repetitive pings from the W AN that can otherwise cause systems to slow down or hang. Figure 26 Firewall C ...

  • ZyXEL NBG6716 - page 43

    Chapter 5 Easy Mode NBG6716 User’s Guid e 43 Figure 27 Internet Setting (IPoE) Figure 28 Internet Setting (PPPoE) The following table describes the labels in this screen. T a ble 15 Internet Setting LABEL DESCRIPTION Intern et Connect ion T ype Select the IPoE (IP over E thernet) optio n when th e WAN port is used as a regular Ethernet. Select th ...

  • ZyXEL NBG6716 - page 44

    Chapter 5 Easy Mode NBG6716 User’s Guide 44 5.6.5 Wireless Security Use this screen to configure security for y our the wireless LAN. Y ou can enter the SSID and select the wireless security mode in the following screen. Note: Y ou can enable the wireless function of your NBG6716 by first turning on the switch in the back pan el. Figure 29 Wirele ...

  • ZyXEL NBG6716 - page 45

    Chapter 5 Easy Mode NBG6716 User’s Guid e 45 The followi ng table describ es the gener a l wireless LAN labels in this screen. 5.6.6 WPS Use this screen to add a wireless station to the network using WPS . Click WPS in the Wireless Security to open the following screen. Figure 30 Wireless Security: WPS T a ble 16 Wireless Security LABEL DESCRIPTI ...

  • ZyXEL NBG6716 - page 46

    Chapter 5 Easy Mode NBG6716 User’s Guide 46 The following table describes the labels in this screen. 5.7 S t atus Screen in Easy Mode In the Network Map screen, click Status to view read-only information about the NBG6716. Figure 31 Status Screen in Easy Mode The following table describes the labels in this screen. T a ble 17 Wireless Security: W ...

  • ZyXEL NBG6716 - page 47

    Chapter 5 Easy Mode NBG6716 User’s Guid e 47 Firmware V ersion This sh ows the fi rmware versio n of the NBG6716 . The firmware version format shows the trunk version, mode l code and release number . Wireless 2.4G Networ k Name (SSID) Wireless 5G Network Name (SSID) This shows the S SID of the wireless network. Y ou can configure this in the Wir ...

  • ZyXEL NBG6716 - page 48

    Chapter 5 Easy Mode NBG6716 User’s Guide 48 ...

  • ZyXEL NBG6716 - page 49

    NBG6716 User’s Guid e 49 C HAPTER 6 Router Mode 6.1 Overview The NBG6716 is set to router mode by default. Routers are used to connect the local network to another network (for example, the Internet). In the figure below, the NBG6716 connects the local network ( LAN1 ~ LAN4 ) to the Internet. Figure 32 NBG6716 Network Note: The Status screen is s ...

  • ZyXEL NBG6716 - page 50

    Chapter 6 Router Mode NBG6716 User’s Guide 50 Figure 33 Status Screen: Router Mode The following table describes the icons shown in the Status screen. T a ble 19 Status Screen Icon K ey ICON DESCRIPTION Logout Click this at any time to exit the W eb Configurator . Click this icon to view copyright and a link for related product information. Click ...

  • ZyXEL NBG6716 - page 51

    Chapter 6 Router Mode NBG6716 User’s Guid e 51 The following table describes the labels shown in the Status screen. Click this i con to see th e Status page. The information in this screen depends on the device mode you selec t. Click this i con to see th e Monito r navigation menu. Click this i con to see th e Configuration navigation menu. Clic ...

  • ZyXEL NBG6716 - page 52

    Chapter 6 Router Mode NBG6716 User’s Guide 52 6.2.1 Navigation Panel Use the sub-menus on the navigation panel to configure NBG6716 features. Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen ( Section 9.5 on page 81 ). Use this screen to view port stat us and packet specific statisti cs. WLAN 2.4 G Station Sta ...

  • ZyXEL NBG6716 - page 53

    Chapter 6 Router Mode NBG6716 User’s Guid e 53 Figure 34 Navigation P anel: Router Mode The following table describes the sub-menus. T a ble 21 Navigation P anel: Router Mode LINK TA B FUNCTION Status This screen sh ows the NBG6716’ s general device, s ystem and interface status information. Use th is screen to acc ess summary statistic s table ...

  • ZyXEL NBG6716 - page 54

    Chapter 6 Router Mode NBG6716 User’s Guide 54 Wireless LAN 2.4G/5G Gener al Use this screen to enable the wirele ss LAN and configure wirel ess LAN and wireless security settings . More AP Use th is screen to configu re multiple BSSs on the NBG6716. MAC Filter Use the MAC filter scree n to configure the NBG6716 to bloc k access to devices or bloc ...

  • ZyXEL NBG6716 - page 55

    Chapter 6 Router Mode NBG6716 User’s Guid e 55 Rem o t e Management WWW Use this scre en to configure throu g h which in terface(s) and from which IP address(es) us ers can use HT TP to manage the NBG671 6. Te l n e t Use this scre en to configure throu g h which in terface(s) and from which IP address(es) us ers can use T elnet to manage the NBG ...

  • ZyXEL NBG6716 - page 56

    Chapter 6 Router Mode NBG6716 User’s Guide 56 ...

  • ZyXEL NBG6716 - page 57

    NBG6716 User’s Guid e 57 C HAPTER 7 Access Point Mode 7.1 Overview Use your NBG6716 as an access po int (AP) if you already have a router or gateway on y our network. In this mode your NBG6716 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 35 Wireless Internet Access in Access ...

  • ZyXEL NBG6716 - page 58

    Chapter 7 Access Point Mode NBG6716 User’s Guide 58 7.3.1 Setting your NBG6716 to AP Mode 1 Log into the W eb Configurator if you hav en’t already . See the Quick start Guide for instructions on how to do this. 2 T o use your NBG6716 as an access point, go to Maintenance > Sys OP Mode and select Access Point Mode . Figure 36 Changing to Acce ...

  • ZyXEL NBG6716 - page 59

    Chapter 7 Access Point Mode NBG6716 User’s Guid e 59 Note: After clicking Login , the Easy Mode appears. Refer to Section on page 37 for the Easy Mode screens. Change to Expert Mode to see the screens described in the sections following this. 7.3.3 Configuring your WL AN and Maintenance Settings The configuration of wireless and maintenance setti ...

  • ZyXEL NBG6716 - page 60

    Chapter 7 Access Point Mode NBG6716 User’s Guide 60 The following table describes the labels shown in the Status screen. T a ble 22 Status Screen: Access Point Mode LABEL DESCRIPTION Device Information Host Name This is the Sy stem Name you enter in the Maintenance > General screen. It is for identificati on purposes. Model Number This is the ...

  • ZyXEL NBG6716 - page 61

    Chapter 7 Access Point Mode NBG6716 User’s Guid e 61 7.4.1 Navigation Panel Use the menu in the navigation panel to configure NBG6716 features in Access Point Mode . Figure 39 Menu: Access Point Mode Re fe r t o T able 21 on page 53 for descriptions of the labels shown in the na vigation panel. 7.5 LAN Screen Use this section to configure your LA ...

  • ZyXEL NBG6716 - page 62

    Chapter 7 Access Point Mode NBG6716 User’s Guide 62 Figure 40 Network > LAN > IP The table below describes the labels in the screen. T a ble 23 Network > LAN > IP LABEL DESCRIPTION Obtain an IP Address Automatically When you en able this, the NBG67 16 gets its IP address from the network’ s DHCP server (for exam ple, your ISP). User ...

  • ZyXEL NBG6716 - page 63

    Chapter 7 Access Point Mode NBG6716 User’s Guid e 63 Apply Click Apply to save y our changes to the NBG6716. Cancel Click Cancel to reload the previous conf iguration for this screen. T a ble 23 Network > LAN > IP (continued) LABEL DESCRIPTION ...

  • ZyXEL NBG6716 - page 64

    Chapter 7 Access Point Mode NBG6716 User’s Guide 64 ...

  • ZyXEL NBG6716 - page 65

    NBG6716 User’s Guid e 65 C HAPTER 8 Tutorials 8.1 Overview This chapter provides tutorial s for setting up you r NBG6716. • Set Up a Wireless Network with WPS • Configure Wireless Security without WPS • Using Multiple SSIDs on the NBG6716 8.2 Set Up a Wireless Network with WPS This section gives you an example of how to set up wirele ss net ...

  • ZyXEL NBG6716 - page 66

    Chapter 8 Tutorials NBG6716 User’s Guide 66 Note: Y our NBG6716 has a WPS button located on its panel, as well as a WPS button in its configur ation utilit y . Both buttons ha ve exactly th e same function; y ou can use one or the other . Note: It doesn’t matter which button is pres sed fi rst. Y ou must pr ess the second button within two mi n ...

  • ZyXEL NBG6716 - page 67

    Chapter 8 Tutorials NBG6716 User’s Guid e 67 3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the NBG6716’s WPS Station screen within two minutes. The NBG6716 authenticates the wireless client and sends the proper configuration settings to the wireless client. This may take up to two minutes ...

  • ZyXEL NBG6716 - page 68

    Chapter 8 Tutorials NBG6716 User’s Guide 68 The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the W eb Configurator through y our LAN connection (see Sect ion 3.2 on page 31 ). 1 Make sure the WIFI switch (at the back panel of the NBG6716) is set to ON . 2 Open the Configuration > Netw ...

  • ZyXEL NBG6716 - page 69

    Chapter 8 Tutorials NBG6716 User’s Guid e 69 5 Open the Status screen. V erify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Int erface Status . 8.3.1 Configure Y our Notebook Note: W e use the Z yXEL NWD2205 wireless adap ter utility screens as an exampl e for the wireless clie ...

  • ZyXEL NBG6716 - page 70

    Chapter 8 Tutorials NBG6716 User’s Guide 70 4 Select SSID_Example3 and click Connect . 5 Select AES and type the security key in the following screen. Click Next . 6 The Confirm Save window appears. Check your settings and click Save to continue. ...

  • ZyXEL NBG6716 - page 71

    Chapter 8 Tutorials NBG6716 User’s Guid e 71 7 Check the status of your wireless connection in the screen below . If your wireless connection is weak or you ha ve no connection, see the T roubleshooting section of this Us er’s Guide. If your connection is successful, open y our Internet browser and enter http://www .zyxel.com or the URL of any ...

  • ZyXEL NBG6716 - page 72

    Chapter 8 Tutorials NBG6716 User’s Guide 72 For example, yo u may set up three wireless networks ( A , B and C ) in your office. A is for workers, B is for guests and C is specific to a V oIP device in the meeting room. 8.4.1 Configuring Security Se ttings of Multiple SSIDs The NBG6716 is in router mode by default. This example shows you how to c ...

  • ZyXEL NBG6716 - page 73

    Chapter 8 Tutorials NBG6716 User’s Guid e 73 6 T ype a new password and retype it to confirm, then click Apply . Otherwise, click Ignore . 7 The Easy Mode appears. Click Expert Mo de in the navigation panel. 8 Go to Configuration > Network > Wir eless LAN 2.4G > More AP . Click the Edit icon of the first entry to configure wireless and s ...

  • ZyXEL NBG6716 - page 74

    Chapter 8 Tutorials NBG6716 User’s Guide 74 11 Configure the screen as follows. Y ou do not enable Intra-BSS Traffic for SSID_VoIP . Click Apply . 12 Clic k the Edit icon of the third entry to configure wireless and security settings for SSID_Gue st . 13 Configure the screen as follows. In this example, you enable Intra-BSS T raffic for SSID_Gues ...

  • ZyXEL NBG6716 - page 75

    Chapter 8 Tutorials NBG6716 User’s Guid e 75 14 Clic k the MAC Filter tab to configure MA C filtering for the SSID_VoIP wireless network. Select SSID_VoIP from the SSID Select drop-down list, enable MAC address filtering and set the Filter Action to Allow . Enter the V oIP device’s MAC address in the Mac Address field and click Apply to allow o ...

  • ZyXEL NBG6716 - page 76

    Chapter 8 Tutorials NBG6716 User’s Guide 76 ...

  • ZyXEL NBG6716 - page 77

    77 P ART II T echnical Reference ...

  • ZyXEL NBG6716 - page 78

    78 ...

  • ZyXEL NBG6716 - page 79

    NBG6716 User’s Guid e 79 C HAPTER 9 Monitor 9.1 Overview This chapter discusses read-only information re lated to the device state of the NBG6716. T o access the Monitor screens, go to Expert Mode after login, then click . Y ou can also click the links in the Summary table of the Status screen to view the packets sent/ received as well as the sta ...

  • ZyXEL NBG6716 - page 80

    Chapter 9 Mon itor NBG6716 User’s Guide 80 log choices depend on your settings in the Log Setting screen. Click Refresh to renew the log screen. Click Clear Log to delete all the logs. Figure 43 View Log 9.3.2 Log Setting Y ou can configure which logs to display in the View Log screen. Go to the Log Setting screen and select the logs you wish to ...

  • ZyXEL NBG6716 - page 81

    Chapter 9 Monitor NBG6716 User’s Guid e 81 Figure 45 Monitor > DH CP T able The following table describes the labels in this screen. 9.5 Packet S t atistics Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status screen. R ead-only information here includes port st atus, packet specific statistics and ...

  • ZyXEL NBG6716 - page 82

    Chapter 9 Mon itor NBG6716 User’s Guide 82 The following table describes the labels in this screen. 9.6 WLAN S t ation St atus Click Monito r > WLAN 2.4G/5G Station Stat us or the WLAN 2.4G/5G Station Status (Details...) hyperlink in the Status screen. View the wireless stations that are currently associate d to the NBG6716’ s 2.4GHz or 5GHz ...

  • ZyXEL NBG6716 - page 83

    Chapter 9 Monitor NBG6716 User’s Guid e 83 The following table describes the labels in this screen. T a ble 26 Monitor > WLAN Station Status LABEL DESCRIPTION # This is the index number of an associated wireless statio n. MAC Address This field displays the MAC address of an associated wireless station. Associati on Time This field displays th ...

  • ZyXEL NBG6716 - page 84

    Chapter 9 Mon itor NBG6716 User’s Guide 84 ...

  • ZyXEL NBG6716 - page 85

    NBG6716 User’s Guid e 85 C HAPTER 10 WAN 10.1 Overview This chapter discusses the NBG6716’ s WAN screens. Use these screens to configure your NBG6716 for Internet access. A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It connects your priv ate networks such as a LAN (Local Area Network) and oth ...

  • ZyXEL NBG6716 - page 86

    Chapter 10 WAN NBG6716 User’s Guide 86 10.3.1 Configuring Y our Internet Connection Encap sulation Method Encapsulation is used to include data from an upper layer protocol into a lower la yer protocol. T o set up a WAN connection to the Internet, y ou need to use the same encapsulation method used by your ISP (Internet Service Provider). If your ...

  • ZyXEL NBG6716 - page 87

    Chapter 10 WAN NBG6716 User’s Guid e 87 Multicast T raditionally , IP packets are transmitted in one of ei ther two w ays - Unicast (1 sender - 1 recipien t) or Broadcast (1 sender - everybody on the networ k). Multicast delivers IP packets to a group of hosts on the network - not everybody and not just 1. Figure 49 Multicast Example In the multi ...

  • ZyXEL NBG6716 - page 88

    Chapter 10 WAN NBG6716 User’s Guide 88 Figure 50 Network > WAN > Internet Connection : IPoE Encapsulation The following table describes the labels in this screen. T a ble 27 Network > W AN > Internet Connection: IPoE Encapsulation LABEL DESCRIPTION ISP Par ameters for Internet Access Encapsu lation Y ou mu st choose the IPoE option wh ...

  • ZyXEL NBG6716 - page 89

    Chapter 10 WAN NBG6716 User’s Guid e 89 10.4.2 PPPoE Encap sulation The NBG6716 supports PPPoE (P oint-to-Point Protocol over Ethernet). PPP oE is an IETF standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-up connection us ...

  • ZyXEL NBG6716 - page 90

    Chapter 10 WAN NBG6716 User’s Guide 90 This screen displays when you select PPPoE encapsulation. Figure 51 Network > WAN > Internet Connection : PPPoE Encapsulation The following table describes the labels in this screen. T a ble 28 Network > W AN > Internet Connection: PPP oE Encapsulation LABEL DESCRIPTION ISP Par ameters for Intern ...

  • ZyXEL NBG6716 - page 91

    Chapter 10 WAN NBG6716 User’s Guid e 91 10.5 Advanced W AN Screen T o change your NBG6716’ s advanced WAN settings, click Netw ork > WAN > Advanced . The screen appears as shown. PPP oE Service Name Enter the PPPoE service name specifi ed in the ISP account. WAN IP Addres s Assignment Get automatical ly from ISP Select this option If your ...

  • ZyXEL NBG6716 - page 92

    Chapter 10 WAN NBG6716 User’s Guide 92 Figure 52 Network > WAN > Adv anced The following table describes the labels in this screen. T a ble 29 Network > W AN > Advanced LABEL DESCRIPTION Multicast Setup Multicast Select IGMPv1/v2 to enable multicasting. This a pplies to traffic routed from the WAN t o t he L A N . Select None to disab ...

  • ZyXEL NBG6716 - page 93

    NBG6716 User’s Guid e 93 C HAPTER 11 Wireless LAN 1 1.1 Overview This chapter discusses how to configure the wireless network settings in you r NBG6716. The NBG6716 is able to function b oth 2.4GHz and 5GHz network at the same time. Y ou can have different wireless and wireless security setting s for 2.4GHz and 5GHz wireless LANs. Click Configura ...

  • ZyXEL NBG6716 - page 94

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 94 1 1.1.1 What Y ou Can Do •U s e t h e General screen to turn the wireless connection on or off , set up wireless security between the NBG6716 and the wireless clients, and make other basic configuration changes ( Section 11.2 on page 98 ). •U s e t h e More AP screen to set up multiple wireless ...

  • ZyXEL NBG6716 - page 95

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 95 MAC Address Filter Every wireless client has a unique identification number , called a MAC address. 1 A MAC address is usually written using twelve hexadecimal characters 2 ; for example, 00A0C5000002 or 00:A0:C5:00:00:02. T o get the MAC address for ea ch wireless client, see the appropriate User ...

  • ZyXEL NBG6716 - page 96

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 96 The types of encryption you can choose depend o n the type of user authentication. (See page 95 for information about this.) For example, if the wireless network has a RADIUS serv er , you can choose WPA or WPA2 . If users do not log in to the wireless network, you can choose no encryption, Stat ic ...

  • ZyXEL NBG6716 - page 97

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 97 Figure 54 Guest Wireless LAN Network Guest WLAN Bandwidth The Guest WLAN Bandwidth function allows you to restrict the maximum bandwidth for the guest wireless network. Additionally , you can also define bandwidth for y our home or office network. An example is shown next to define maximum bandwidt ...

  • ZyXEL NBG6716 - page 98

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 98 Number) in the devices. Then, they connect and set up a secure network by themselves. See how to set up a secure wireless network using WPS in the Section 8.2 on page 65 . 1 1.2 General W ireless LAN Screen Use this screen to configure the SSID and wireless security of the wireless LAN. Note: If yo ...

  • ZyXEL NBG6716 - page 99

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 99 Channel Selection Set the operating frequency/channel de pending on your particular region. Select a channel from the drop-down list box . The options vary depending on the frequency band and the country you are in. Refer to the Connection Wizard chapter for mo re informatio n on channe ls. This op ...

  • ZyXEL NBG6716 - page 100

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 100 See the rest of this chapter for inform at ion on the other labels in this screen. 1 1.3 W ireless Security The screen varies depending on what y ou select in the Security Mode field. 1 1.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any ...

  • ZyXEL NBG6716 - page 101

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 101 The following table describes the labels in this screen. 1 1.3.2 WEP Encryption WEP encryption scrambles the data tr ansmitted between the wireless stations and the access points to keep network communications private. It encr ypts unicast and multicast communications in a network. Both the wirele ...

  • ZyXEL NBG6716 - page 102

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 102 Figure 58 Network > Wireless LAN 2.4G/5G > General: Static WEP The following table describes the wireless LAN security labels in this screen. T a ble 33 Network > Wireless LAN 2.4G/5G > Gener al: Static WEP LABEL DESCRIPTION Security Mode Select Static WEP to en able data encryption. P ...

  • ZyXEL NBG6716 - page 103

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 103 1 1.3.3 WP A-PSK/WP A2-PSK Select WPA-PSK or WPA2-PSK from the Security Mod e list. Figure 59 Network > Wireless LAN 2.4G/5G > General: WPA -PSK/WPA2-PSK ASCII Select this option in order to enter ASCII characters as WEP k ey . Hex Sel ect this opti on in order to en ter hexadecimal characte ...

  • ZyXEL NBG6716 - page 104

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 104 The following table describes the labels in this screen. 1 1.3.4 WP A/WP A2 Select WPA or WPA2 from the Security Mo de list. Note: WP A or WPA 2 is not av ailable if you enabl e WPS before you configu re WPA or WP A2 in the Wireless LAN 2.4G/5G > General scr een. T a ble 34 Network > Wireles ...

  • ZyXEL NBG6716 - page 105

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 105 Figure 60 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2 The following table describes the labels in this screen. T a ble 35 Network > Wireless LAN 2.4G/5G > Gener al: WPA/WPA2 LABEL DESCRIPTION Security Mode Select WPA or WPA2 to enable data encryption. WPA Co mpatible This che ck ...

  • ZyXEL NBG6716 - page 106

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 106 1 1.4 More AP Screen This screen allows you to enable and configure multiple wireless networks and guest wireless network settings on the NBG6716. Y ou can configure up to four SSIDs to enable mu ltiple BSSs (Basic Service Sets) on the NBG6716. This allows you to use one access point to provide se ...

  • ZyXEL NBG6716 - page 107

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 107 Figure 61 Network > Wireless LAN 2.4G/5G > More AP The following table describes the labels in this screen. 1 1.4.1 More AP Edit Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The following screen displays. Figure 62 Network > Wireless ...

  • ZyXEL NBG6716 - page 108

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 108 Figure 63 Network > Wireless LAN 2.4G/5G > More AP: Edit (the last SSID) The following table describes the labels in this screen. T a ble 37 Network > Wireless LAN 2.4G/5G > More AP: Edit LABEL DESCRIPTION Active Select this to activ ate the SSID profi le. Name (SSID) The SSID (Service ...

  • ZyXEL NBG6716 - page 109

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 109 1 1.5 MAC Filter Screen The MAC filter screen allows you to configure the NBG6716 to give exclusive access to devices ( Allow ) or exclude devices from accessing the NBG6716 ( Deny ). Every Ethernet device has a unique MAC (Media Access Control) address. Th e MAC address is assigned at the factory ...

  • ZyXEL NBG6716 - page 110

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 11 0 Figure 64 Network > Wirele ss LAN 2.4G/ 5G > MAC Fi lter The following table describes the labels in this menu. T a ble 38 Network > Wireless LAN 2.4G/5G > MAC Filter LABEL DESCRIPTION SSID Se lect Select the SSID for whic h you want to configure M AC filtering. MAC Address Filter Sel ...

  • ZyXEL NBG6716 - page 111

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 111 1 1.6 W ireless LAN Advanced Screen Use this screen to allow wireless adv anced features , such as the output power , RT S/CTS Threshold settings. Click Network > Wireless LAN 2.4G/5G > Advanc ed . The screen appears as shown. Figure 65 Network > Wirele ss LAN 2.4G/5 G > Adv anced The ...

  • ZyXEL NBG6716 - page 112

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 11 2 Click Network > Wireless LAN 2.4G/5G > QoS . The following screen appears. Figure 66 Network > Wireless LAN 2.4G/5G > QoS The following table describes the labels in this screen. 1 1.8 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check curren ...

  • ZyXEL NBG6716 - page 113

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 11 3 Figure 67 Network > Wireless LAN 2.4G/5G > WPS The following table describes the labels in this screen. T a ble 41 Network > Wireless LAN 2.4G/5G > WPS LABEL DESCRIPTION WPS Setup WPS Select Enable to turn on the WPS feat ure. Other wise, select Disable . PIN Code Select Enable and cl ...

  • ZyXEL NBG6716 - page 114

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 11 4 1 1.9 WPS S t ation Screen Use this screen when you want to add a wireless station using WPS . T o open this screen, click Network > Wireless LAN 2.4G /5G > WPS Station tab. Note: After you click Push Button on this screen, y ou have t o press a similar button in the wireless station uti li ...

  • ZyXEL NBG6716 - page 115

    Chapter 11 Wireless LAN NBG6716 User’s Guid e 11 5 Figure 69 Network > Wireless LAN 2.4G/5G > Scheduling The following table describes the labels in this screen. T a ble 43 Network > Wireless LAN 2.4G/5G > Scheduling LABEL DESCRIPTION Wireless LAN Scheduling Wireless LAN Scheduli ng Select Enable to activ ate the wireless LAN scheduli ...

  • ZyXEL NBG6716 - page 116

    Chapter 11 Wi reless LAN NBG6716 User’s Guide 11 6 ...

  • ZyXEL NBG6716 - page 117

    NBG6716 User’s Guid e 11 7 C HAPTER 12 LAN 12.1 Overview This chapter describes how to configure LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same b uilding or floor of a building. Figure 70 LAN Example The LAN ...

  • ZyXEL NBG6716 - page 118

    Chapter 12 LAN NBG6716 User’s Guide 11 8 Figure 71 LAN and WAN IP Addresses The LAN parameters of the NBG6716 in router mode are preset in the factory with the following val ue s: • IP address of 192.168.1. 1 with subnet mask of 255.255.255.0 (24 bits) • DHCP server enabled with 32 client IP addresse s starting from 192. 168.1.33. These param ...

  • ZyXEL NBG6716 - page 119

    Chapter 12 LAN NBG6716 User’s Guid e 11 9 The following table describes the labels in this screen. 12.5 IP Alias Screen Use this screen to have the NBG6716 apply IP alias to create LAN subn ets. Click LAN > IP Alias . Figure 73 Network > LAN > IP Alias The following table describes the labels in this screen. T a ble 44 Network > LAN & ...

  • ZyXEL NBG6716 - page 120

    Chapter 12 LAN NBG6716 User’s Guide 120 ...

  • ZyXEL NBG6716 - page 121

    NBG6716 User’s Guid e 121 C HAPTER 13 DHCP Server 13.1 Overview DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configur ation at start -up from a server . Y ou can configure the NBG6716’ s LAN as a DHCP server or disable it. When configured as a server , the NBG6716 provides the TCP/ ...

  • ZyXEL NBG6716 - page 122

    Chapter 13 DH CP Server NBG6716 User’s Guide 122 13.2 DHCP Server General Screen Use this screen to enable the DHCP server . Clic k Network > DHCP Server . The following screen displays. Figure 74 Network > DHCP Server > Gener al The following table describes the labels in this screen. 13.3 DHCP Server Advanced Screen This screen allows ...

  • ZyXEL NBG6716 - page 123

    Chapter 13 DHCP Server NBG6716 User’s Guid e 123 Figure 75 Network > DHCP Server > Adv anced The following table describes the labels in this screen. T a ble 47 Network > DHC P Server > Adv anced LABEL DESCRIPTION Static DHCP T able # This is the inde x number of the static IP tabl e entry (row). MAC Address T ype the M AC address (w ...

  • ZyXEL NBG6716 - page 124

    Chapter 13 DH CP Server NBG6716 User’s Guide 124 13.4 DHCP Client List Screen The DHCP table shows current DHCP client information (including IP Addre ss, Host Name and MAC Address) of network clients us ing the NBG6716’s DHCP servers. Configure this screen to always assign an IP address to a MAC address (and host name). Click Network > DHCP ...

  • ZyXEL NBG6716 - page 125

    Chapter 13 DHCP Server NBG6716 User’s Guid e 125 Host Name This field displays the computer host name. IP Address This field displays the IP addr ess relative t o the # field listed above. MAC Address This field shows the MAC address of th e computer with t he name in the Host Name field. Every Ethernet device h as a unique MAC (Media Ac cess Con ...

  • ZyXEL NBG6716 - page 126

    Chapter 13 DH CP Server NBG6716 User’s Guide 126 ...

  • ZyXEL NBG6716 - page 127

    NBG6716 User’s Guid e 127 C HAPTER 14 NAT 14.1 Overview NA T (Network Address T ranslation - NA T , RFC 1631) is the translation of the IP address of a host in a packet. F or example, the source address of an outgoing pack et, used within one network is changed to a different IP address known within another network. The figure below is a simple i ...

  • ZyXEL NBG6716 - page 128

    Chapter 14 NAT NBG6716 User’s Guide 128 •U s e t h e Port Forw arding screen to set a default server and change y our NBG6716’s port forwarding settings to forw ard incoming service re quests to the server(s) on your local network ( Section 14.3 on page 130 ). •U s e t h e Port Trigger screen to change your NBG6716’s trigger port settings ...

  • ZyXEL NBG6716 - page 129

    Chapter 14 NAT NBG6716 User’s Guid e 129 network and make them accessible to the outside world. If you do not define any servers , NA T offers the additional benefit of fi rewall protection. With no servers defined, your NBG6716 filters out all incoming inquiries, thus preventing intruders from probing your n etwork. For more information on IP ad ...

  • ZyXEL NBG6716 - page 130

    Chapter 14 NAT NBG6716 User’s Guide 130 The following table describes the labels in this screen. 14.3 Port Forwarding Screen Use this screen to forward incoming service requests to the server(s) on your local network and set a default server . Y ou may enter a single port number or a r ange of port numbers to be forwarded, and the local IP addres ...

  • ZyXEL NBG6716 - page 131

    Chapter 14 NAT NBG6716 User’s Guid e 131 Figure 80 Network > NA T > Port Forwarding The following table describes the labels in this screen. T a ble 51 Network > NA T > Port F orwarding LABEL DESCRIPTION Default Serve r Setup Default Server In addition to the servers fo r specified serv ices, NA T supports a defa ult server . A defaul ...

  • ZyXEL NBG6716 - page 132

    Chapter 14 NAT NBG6716 User’s Guide 132 14.3.1 Port Forwarding Edit Screen This screen lets you edit a port forwarding rule. Click a rule’s Edit icon in the Port Forwarding screen to open the following screen. Figure 81 Network > NA T > Port Forwarding Edit The following table describes the labels in this screen. Apply Click Apply to save ...

  • ZyXEL NBG6716 - page 133

    Chapter 14 NAT NBG6716 User’s Guid e 133 14.4 Port T rigger Screen T o change your NBG6716’ s trigger port settings, click Network > NAT > Port Trigger . The screen appears as shown. Note: Only one LAN comp uter can use a trigger port (r ange) at a time. Figure 82 Network > NA T > Port T rigger The following table describes the labe ...

  • ZyXEL NBG6716 - page 134

    Chapter 14 NAT NBG6716 User’s Guide 134 14.5 T e chnical Reference The following section contains additional tec hnical information about the NBG6716 features described in this chapter . 14.5.1 NA TPort Forwarding: Services and Port Numbers A port forwarding set is a list of inside (behind NA T on the LAN) servers, for example, web or FTP , that ...

  • ZyXEL NBG6716 - page 135

    Chapter 14 NAT NBG6716 User’s Guid e 135 14.5.3 T rigger Port Forwarding Some services use a dedicated range of ports on the client side and a dedicated range of ports on the server side. With regular port forw arding you set a forwarding port in NA T to forward a service (coming in from the server on the W AN) to the IP address of a computer on ...

  • ZyXEL NBG6716 - page 136

    Chapter 14 NAT NBG6716 User’s Guide 136 14.5.5 T wo Point s T o Re member About T rigger Port s 1 T rigger events only happen on data that is coming from inside the NBG6716 and going to the outside. 2 If an application needs a continuous data stream, that port (r ange) will be tied up so that another computer on the LAN can’t trigger it. ...

  • ZyXEL NBG6716 - page 137

    NBG6716 User’s Guid e 137 C HAPTER 15 DDNS 15.1 Overview DDNS services let you use a domain name with a dynam ic IP address. 15.1.1 What Y ou Need T o Know The following terms and concepts may he lp as y ou read through this chapter . What is DDNS? Dynamic Domain Name Service (DDNS) services le t y ou use a fixed domain name w ith a dynamic IP ad ...

  • ZyXEL NBG6716 - page 138

    Chapter 15 DDNS NBG6716 User’s Guide 138 The following table describes the labels in this screen. T a ble 54 Dynamic DNS LABEL DESCRIPTION Dynamic DNS Select Enable to use dynam ic DNS. Sel ect Disable to turn this feature off . Service Provider Selec t the name of your Dy namic DNS service provi der . Host Name Enter a host n ames in th e field ...

  • ZyXEL NBG6716 - page 139

    NBG6716 User’s Guid e 139 C HAPTER 16 Static Route 16.1 Overview This chapter shows you how to configure static routes for your NBG6716. The NBG6716 usually uses the default gateway to route outbound tr affic from computers on the LAN to the Internet. T o have the NBG6716 send da ta to devices not reachable through the default gateway , use stati ...

  • ZyXEL NBG6716 - page 140

    Chapter 16 Static Route NBG6716 User’s Guide 140 Figure 87 Network > Static Route The following table describes the labels in this screen. 16.2.1 Add/Edit St atic Route Click the Add Static Route button or a rule’ s Edit icon in the Static Route screen. Use this screen to configure the required information for a static route. Figure 88 Netwo ...

  • ZyXEL NBG6716 - page 141

    Chapter 16 Static Route NBG6716 User’s Guid e 141 The following table describes the labels in this screen. T a ble 56 Network > Static Route: Add/Edit LABEL DESCRIPTION Stati c Ro ute Select to enable or disable this rule. Route Name T ype a name to identify this rule. Y ou can us e up to printable English keyboard characters, including spaces ...

  • ZyXEL NBG6716 - page 142

    Chapter 16 Static Route NBG6716 User’s Guide 142 ...

  • ZyXEL NBG6716 - page 143

    NBG6716 User’s Guid e 143 C HAPTER 17 Firewall 17.1 Overview Use these screens to enable and configure the fire wall that protects your NBG6716 and your LAN from unwanted or m alicious traffic. Enable the firewall to protect your LAN computers from attacks by hack ers on the Internet and control access between the LAN and W AN. By default the fir ...

  • ZyXEL NBG6716 - page 144

    Chapter 17 Fi rewall NBG6716 User’s Guide 144 What is a Firewall? Originally , the term “firewall” referred to a construc tion technique designed to prevent the spread of fire from one room to another . The networking term "firewall" is a system or group of systems that enforces an access-control policy between two ne tworks. It ma ...

  • ZyXEL NBG6716 - page 145

    Chapter 17 Firewall NBG6716 User’s Guid e 145 4 Don't enable any local service (such as NTP) that you don't use. Any enabled servic e could present a potential security risk. A determined hacker migh t be able to find creati v e ways to misuse the enabled services to access the firewall or the network. 5 For local services that are enab ...

  • ZyXEL NBG6716 - page 146

    Chapter 17 Fi rewall NBG6716 User’s Guide 146 Figure 91 Security > Firewall > Services l The following table describes the labels in this screen. T a ble 58 Security > Firew all > Services LABEL DESCRIPTION LABEL DESCRIPTION ICMP Internet Control Message Protocol is a me ssage control and error-reporting protocol between a host server ...

  • ZyXEL NBG6716 - page 147

    Chapter 17 Firewall NBG6716 User’s Guid e 147 See Appendix C on page 2 37 for commonly used services and port numbers. Source I P Addr ess Enter the IP addres s of the computer that init ializes tr affic for the application o r service. The NBG6716 applies the firewall rule to tr affic initiating from this computer . Protocol Select the protocol ...

  • ZyXEL NBG6716 - page 148

    Chapter 17 Fi rewall NBG6716 User’s Guide 148 ...

  • ZyXEL NBG6716 - page 149

    NBG6716 User’s Guid e 149 C HAPTER 18 Content Filtering 18.1 Overview This chapter provides a brief overview of content filtering using the embedded web GUI. Internet content filtering allows you to create an d enforce Internet access policies tailored to your needs. Content filtering is the ability to block certain web features or specific URL k ...

  • ZyXEL NBG6716 - page 150

    Chapter 18 Content Fil tering NBG6716 User’s Guide 150 Figure 92 Security > Content Filter The following table describes the labels in this screen. T a ble 59 Security > Content Filter LABEL DESCRIPTION T rusted IP Setup T o enable this feature, type an IP address of any one of the computers i n your network that you want to have as a trust ...

  • ZyXEL NBG6716 - page 151

    Chapter 18 Content Filtering NBG6716 User’s Guid e 151 18.3 T e chnical Reference The following section contains additional tec hnical information about the NBG6716 features described in this chapter . 18.3.1 Customizing Keyw ord Blocking URL Checking Y ou can use commands to set how much of a website’ s URL the content filter is to check for k ...

  • ZyXEL NBG6716 - page 152

    Chapter 18 Content Fil tering NBG6716 User’s Guide 152 Use the ip urlfilter customize actionFlags 8 [disable | e nable] command to extend (or not extend) the keyword blocking search to include the URL 's complete filename. ...

  • ZyXEL NBG6716 - page 153

    NBG6716 User’s Guid e 153 C HAPTER 19 StreamBoost Management 19.1 Overview The NBG6716 supports the new StreamBoost technolo gy , introduced by Qualcomm, to redistribute traffic over the NBG6716 for the best possible performance in a home network. Streamboost is smart Quality of Service (QoS). St reamboost detects tr affic flows and applies traff ...

  • ZyXEL NBG6716 - page 154

    Chapter 19 StreamBoost Management NBG6716 User’s Guide 154 •U s e t h e Bandwidt h screen to configure the maximum allowable bandwidth and enable automatic update( Section 19.4 on page 154 ). •U s e t h e Priorities screen to prioritize the connected devices ( Section 19.5 on page 156 ). •U s e t h e Up Time screen to view the top fiv e tra ...

  • ZyXEL NBG6716 - page 155

    Chapter 19 StreamBoost Management NBG6716 User’s Guid e 155 Figure 95 Management > StreamBoost Management > Bandw idth The following table describes the labels in this screen. T a ble 60 Management > StreamBoost Management > Bandwidth LABEL DESCRIPTION Automatic Bandwidth Detection Select this op tion to control the maximum or minimum ...

  • ZyXEL NBG6716 - page 156

    Chapter 19 StreamBoost Management NBG6716 User’s Guide 156 19.5 Priorities Screen The StreamBoost engine on the NBG671 6 can identify the types of connected devices (such as PC, smart phone, tablet, TV or game console) in y our network. When there is not enough bandwidth to support traffic of the same priorit y , the NBG6716 refers to the connect ...

  • ZyXEL NBG6716 - page 157

    Chapter 19 StreamBoost Management NBG6716 User’s Guid e 157 Figure 97 Manage ment > Str eamBoos t Manage ment > Up Tim e 19.7 Downloads Screen Use this screen to view the type and percenta ge of most download traffic on the NBG6716. Click Management > StreamBoost MGMT > Downloads to open the Downloads screen. ...

  • ZyXEL NBG6716 - page 158

    Chapter 19 StreamBoost Management NBG6716 User’s Guide 158 Figure 98 Manage ment > Str eamBoos t Managem ent > Downlo ads 19.8 All Event s Screen Use this screen to view the time at which a traffic flow is given enough bandwidth for optimal, good or best-e ffort performance. Click Management > StreamBoost MGMT > All Events to open the ...

  • ZyXEL NBG6716 - page 159

    Chapter 19 StreamBoost Management NBG6716 User’s Guid e 159 Figure 99 Manage ment > Stre amBoost Managemen t > All Events ...

  • ZyXEL NBG6716 - page 160

    Chapter 19 StreamBoost Management NBG6716 User’s Guide 160 ...

  • ZyXEL NBG6716 - page 161

    NBG6716 User’s Guid e 161 C HAPTER 20 Remote Management 20.1 Overview This chapter provides information on the R emote Management screens. R emote Management allows you to m anage your NBG6716 from a remote location through the following interfaces: •L A N a n d W A N •L A N o n l y •W A N o n l y Note: The NBG6716 is managed using the W eb ...

  • ZyXEL NBG6716 - page 162

    Chapter 20 Remote Management NBG6716 User’s Guide 162 20.3.1 Remote Management and NA T When NA T is enabled: • Use the NBG6716’s W AN IP address whe n configuring from the W AN. • Use the NBG6716’s LAN IP address when configuring from the LAN. 20.3.2 System T imeout There is a default system management idle timeout of five m inutes (thre ...

  • ZyXEL NBG6716 - page 163

    Chapter 20 Remote Management NBG6716 User’s Guid e 163 20.5 T e lnet Screen T o change your NBG6716’ s remote management settings, click Management > Remote MGMT > Telnet to open the Telnet screen. Figure 101 Management > Re mote MGMT > T elnet The following table describes the labels in this screen. 20.6 W ake On LAN Screen W ake O ...

  • ZyXEL NBG6716 - page 164

    Chapter 20 Remote Management NBG6716 User’s Guide 164 Use this screen to remotely turn on a device on the network. Click the Management > Remote MGMT > Wake On LAN to open the following screen. Figure 102 Management > R emote MGMT > W ake On LAN The following table describes the labels in this screen. T a ble 63 Management > R emot ...

  • ZyXEL NBG6716 - page 165

    NBG6716 User’s Guid e 165 C HAPTER 21 Universal Plug-and-Play (UPnP) 21.1 Overview This chapter introduces the UPnP feature in the web configur ator . Universal Plug and Play (UPnP) is a distributed, open networking standard that uses T CP/IP for simple peer-to-peer network connectivit y between devices. A UPnP device can dynamically join a netwo ...

  • ZyXEL NBG6716 - page 166

    Chapter 21 Uni versal Plug-and-Pla y (UPnP) NBG6716 User’s Guide 166 All UPnP-enabled devices may communicate freely with each other without additional configur ation. Disable UPnP if this is not your intention. 21.3 UPnP Screen Use this screen to enable UPnP on your NBG6716. Click Manage ment > UP nP to display the screen shown next. Figure 1 ...

  • ZyXEL NBG6716 - page 167

    Chapter 21 Universal Plug-and-Play (UPnP) NBG6716 User’s Guid e 167 Figure 104 Network Connections 3 In the Internet Connection Properties window , click Settings to see the port mappings there were automatically created. Figure 105 Internet Connection Properties 4 Y ou may edit or delete the port mappings or click Add to manually add port mappin ...

  • ZyXEL NBG6716 - page 168

    Chapter 21 Uni versal Plug-and-Pla y (UPnP) NBG6716 User’s Guide 168 Figure 107 Internet Connection Properties: Advanced Settings: Add Note: When the UPnP-enabled devi ce is di sconnected from your com puter , all port mappings will be deleted automatic ally . 5 Select Show icon in n otification area when connected option and click OK . An icon d ...

  • ZyXEL NBG6716 - page 169

    Chapter 21 Universal Plug-and-Play (UPnP) NBG6716 User’s Guid e 169 3 Select My Network Places und er Other Places . Figure 1 10 Network Connections 4 An icon with the description for each UPnP-enabled device displays under Local Network . 5 Right-click on the icon for y our NBG6716 and select Invoke . The web configurator login screen displays. ...

  • ZyXEL NBG6716 - page 170

    Chapter 21 Uni versal Plug-and-Pla y (UPnP) NBG6716 User’s Guide 170 Figure 1 12 Network Connections: My Network Places: Properties: Example ...

  • ZyXEL NBG6716 - page 171

    NBG6716 User’s Guid e 171 C HAPTER 22 USB Media Sharing 22.1 Overview This chapter describes how to configure the media sharing settings on the NBG6716. Note: The read and write performance ma y be af fected by amount of file-sharing t raffi c on your network, t ype of connected USB de vice an d you r US B ver sio n (1. 1 o r 2.0 ). Media Server ...

  • ZyXEL NBG6716 - page 172

    Chapter 22 USB Media Sharin g NBG6716 User’s Guide 172 File-Sharing Server Y ou can also share files on a USB memory stick or hard drive connected to y our NBG6716 with users on your network. The following figure is an overv iew of the NBG6716’ s file-sharing server feature. Computers A and B can access files on a USB device ( C ) which is conn ...

  • ZyXEL NBG6716 - page 173

    Chapter 22 USB Media Sharing NBG6716 User’s Guid e 173 Workgroup name This is the name given to a set of computers th at are connected on a network and share resources such as a printer or files. Windows automatically assigns the workgroup name when you set up a network. File Systems A file system is a way of storing and organizing files on your ...

  • ZyXEL NBG6716 - page 174

    Chapter 22 USB Media Sharin g NBG6716 User’s Guide 174 Note: If your USB device cannot be detect ed by the NBG6716, see the troubleshooting for suggestions. 22.5 DLNA Screen Use this screen to have the NBG6716 act as a DLNA -compliant me dia server that lets DLNA - compliant media clients on y our network play video, music, and photos from the NB ...

  • ZyXEL NBG6716 - page 175

    Chapter 22 USB Media Sharing NBG6716 User’s Guid e 175 Figure 1 16 Manage ment > USB Media Sharing > SAMBA The following table describes the labels in this screen. T a ble 66 Management > USB Media Sharing > SAMBA LABEL DESCRIPTION Enable SA MBA Select this to e nable file sharing through the NBG6716 using Wi ndows Explorer or by brow ...

  • ZyXEL NBG6716 - page 176

    Chapter 22 USB Media Sharin g NBG6716 User’s Guide 176 22.7 FTP Screen Use this screen to set up file sharing via the NBG6716 using FTP and create user accounts. Click Management > USB Media Sharing > FTP . Figure 1 17 Manage ment > USB Media Sharing > FTP The following table describes the labels in this screen. Enable This field disp ...

  • ZyXEL NBG6716 - page 177

    Chapter 22 USB Media Sharing NBG6716 User’s Guid e 177 22.8 Example of Accessing Y our Shared Files From a Computer Y ou can use Windows Explorer or FTP to access the USB storage devices connected to the NBG6716. This example shows you how to use Microsoft’ s Wind ows XP to browse your shared files. Refer to your oper ating system’ s document ...

  • ZyXEL NBG6716 - page 178

    Chapter 22 USB Media Sharin g NBG6716 User’s Guide 178 1 In Windows Explorer’ s Address bar type a double ba ckslash “” fo llowed by the IP address of the NBG6716 (the default IP address of the NBG6 716 in router mode is 192.168.1.1) and press [ENTER]. A screen asking for password authenticati on appears. T ype the user name and password ...

  • ZyXEL NBG6716 - page 179

    Chapter 22 USB Media Sharing NBG6716 User’s Guid e 179 2 Y ou can also use the workgroup name to access files by browsing to the workgroup folder using the folder tree on the left side of the screen. It is located under My Network Places . In this example the workgroup name is the default “W orkgroup” . 22.8.2 Use FTP to Share Files Y ou can ...

  • ZyXEL NBG6716 - page 180

    Chapter 22 USB Media Sharin g NBG6716 User’s Guide 180 2 A screen asking for password authentication appe ars. Enter the user name and password (y ou configured in the USB Media Sharing > FTP screen) and click Log On . 3 The screen changes and shows you the folder for the USB stor age device connected to your NBG6716. Double-click the folder t ...

  • ZyXEL NBG6716 - page 181

    NBG6716 User’s Guid e 181 C HAPTER 23 Maintenance 23.1 Overview This chapter provides information on the Maintenance screens. 23.2 What Y ou Can Do •U s e t h e General screen to set the timeout period of the management session ( Section 23.3 on page 181 ). •U s e t h e Password screen to change your NBG6716’s system password ( Section 23.4 ...

  • ZyXEL NBG6716 - page 182

    Chapter 23 Maintenance NBG6716 User’s Guide 182 The following table describes the labels in this screen. 23.4 Password Screen It is strongly recommended that you change your NBG6716's password. If you forget your NBG6716's password (or IP a ddress), you will need to reset the device. See Section 23.8 on page 187 for details. Click Maint ...

  • ZyXEL NBG6716 - page 183

    Chapter 23 Maintenance NBG6716 User’s Guid e 183 23.5 T ime Setting Screen Use this screen to configure the NBG6716’s time based on y our local time zone. T o change your NBG6716’s time and date, click Maintenance > Time . The screen appears as shown. Figure 120 Maintenance > Time The following table describes the labels in this screen. ...

  • ZyXEL NBG6716 - page 184

    Chapter 23 Maintenance NBG6716 User’s Guide 184 23.6 Firmware Upgrade Screen Find firmware at www .zyxel.com in a file that uses the version number and pro ject code with a “*.bin” extension, e.g. , “V 1.00(AAKG.0).bin” . The upload process uses HTTP (Hypertext T r ansfer Protocol) and may take up to two minutes. Afte r a successful uploa ...

  • ZyXEL NBG6716 - page 185

    Chapter 23 Maintenance NBG6716 User’s Guid e 185 Click Maintenance > Fi rmware Upgrade . Follow the instructions in this screen to upload firmware to your NBG6716. Figure 121 Maintenance > Firmware Upgr ade The following table describes the labels in this screen. Note: Do not turn off the NBG6716 while firm ware upload is in progress! After ...

  • ZyXEL NBG6716 - page 186

    Chapter 23 Maintenance NBG6716 User’s Guide 186 23.7 Configuration Backup/Restore Screen Backup configuration allows you to back up (save) the NBG6716’s current configuration to a file on your computer . Once your NBG6716 is configur ed and functioning properly , it is highly recommended that you back up y our configuration file before making c ...

  • ZyXEL NBG6716 - page 187

    Chapter 23 Maintenance NBG6716 User’s Guid e 187 Note: If yo u uploaded the default conf igurat ion file you may need to change the IP address of your comput er to be in the sa me subnet as that of the default NBG6 716 IP address (192.168.1.1). See Appendix B on page 209 for details on how to set up your computer’ s IP address. 23.8 Rest art Sc ...

  • ZyXEL NBG6716 - page 188

    Chapter 23 Maintenance NBG6716 User’s Guide 188 Figure 125 Maintenance > Language 23.10 System Operation Mode Overview The Sys OP Mode (System Oper ation Mode) function lets you configure your NBG6716 as a router or access point. Y ou can choose between Router Mode , and Access Point Mode depend ing on your network topology and the features yo ...

  • ZyXEL NBG6716 - page 189

    Chapter 23 Maintenance NBG6716 User’s Guid e 189 Figure 127 Access Point Mode 23.1 1 Sys OP Mode Screen Use this screen to select how y ou want to use your NBG6716. Figure 128 Maintenance > Sys OP Mode The following table describes the labels in the General screen. T a ble 73 Maintenance > Sys OP Mode LABEL DESCRIPTION Configur ation Mode R ...

  • ZyXEL NBG6716 - page 190

    Chapter 23 Maintenance NBG6716 User’s Guide 190 Note: If you select the incorrect system oper ation Mode you ma y not be able to connect to the In ternet. Access P oint Mode Select Access Point Mode if your device bridges tr a ffic between c lients on the same network. •I n Access Point Mode , all Ethernet ports have the same IP address. • Al ...

  • ZyXEL NBG6716 - page 191

    NBG6716 User’s Guid e 191 C HAPTER 24 Troubleshooting 24.1 Overview This chapter offers some suggestions to solve problems you might encounter . The potential problems are divided into the following categories. • Po wer , Hardware Connections, and LEDs • NBG6716 Access and Login • Internet Access • Resetting the NBG6716 to Its F actory De ...

  • ZyXEL NBG6716 - page 192

    Chapter 24 Tro ubleshooting NBG6716 User’s Guide 192 4 Disconnect and re-connect the power adaptor to the NBG6716. 5 If the problem continues, contact the v endor . 24.3 NBG6716 Access and Login I don’t know the IP address of my NBG6716. 1 The default IP address of the NBG6716 in Router Mode is 192.168.1.1 . The default IP address of the NBG671 ...

  • ZyXEL NBG6716 - page 193

    Chapter 24 Troubl eshooting NBG6716 User’s Guid e 193 2 Check the hardware connections, and make sure th e LEDs are behaving as expected. See the Quick Start Guide. 3 Make sure y our Internet browser does not block pop-up windows and h as JavaScript and Jav a enabled. See Appendix A on page 199 . 4 Make sure your computer is in the same subnet as ...

  • ZyXEL NBG6716 - page 194

    Chapter 24 Tro ubleshooting NBG6716 User’s Guide 194 1 Check the hardware connections, and make sure th e LEDs are behaving as expected. See the Quick Start Guide. 2 Go to Maintenance > Sys OP Mode . Check y our System Oper ation Mode setting. • If the NBG6716 is in Router Mode , make sure th e WAN port is connected to a broadband modem or r ...

  • ZyXEL NBG6716 - page 195

    Chapter 24 Troubl eshooting NBG6716 User’s Guid e 195 • Check the settings for QoS. If it is disabled, you might consider activating it. 24.5 Resetting the NBG6716 to It s Factory Default s If you reset the NBG6716, you lo se all of the changes you have made. The NBG6716 re-loads its default settings, and th e password resets to 1234 . Y ou hav ...

  • ZyXEL NBG6716 - page 196

    Chapter 24 Tro ubleshooting NBG6716 User’s Guide 196 7 Make sure you allow the NBG6716 to be remote ly accessed through the WLAN interface. Check your remote management settings. • See the chapte r on Wireless LAN in the User’s Guide for more information. I set up URL keyword b locking, but I can still access a website that should b e blocked ...

  • ZyXEL NBG6716 - page 197

    Chapter 24 Troubl eshooting NBG6716 User’s Guid e 197 • Po sition the antennas for best reception. If the AP is placed on a table or floor , point the antennas upwards. If the AP is placed at a high position , point the antennas downw ards. T ry pointing the antennas in different directions and check which provides the strongest signal to the w ...

  • ZyXEL NBG6716 - page 198

    Chapter 24 Tro ubleshooting NBG6716 User’s Guide 198 5 If the USB device requires a special driver , insta ll the driver from the installation disc that came with the device. After driver installation, reco nnect the USB device to the NBG6716 and try to connect to it again with y our computer . 6 If the problem persists, contact your v endor . I ...

  • ZyXEL NBG6716 - page 199

    NBG6716 User’s Guid e 199 A PPENDIX A Pop-up Windows, JavaScript and Java Permissions In order to use the web configur ator you need to allow: • W eb browser pop-up windows from your device . • Jav aScript (enabled by default). • Jav a permissions (enabled by default). Note: The screens used below belong to Intern et Explorer versi on 6, 7 ...

  • ZyXEL NBG6716 - page 200

    Appendix A Pop-up Windows, JavaScript and Java Permissions NBG6716 User’s Guide 200 Figure 130 Internet Options: Privacy 3 Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Alternatively , if you only want to allow pop-up windows from your device, see the following steps. 1 In Internet Explorer , select Tools , Internet Opt ...

  • ZyXEL NBG6716 - page 201

    Appendix A Pop-up Windows, JavaScrip t and Java Permissions NBG6716 User’s Guid e 201 Figure 131 Internet Options: Privacy 3 T ype the IP address of your device (the web page that you do not want to have blocke d) with the prefix “http://” . For example, http://192.168.167.1. 4 Click Add to move the IP address to the list of Allowed sites . F ...

  • ZyXEL NBG6716 - page 202

    Appendix A Pop-up Windows, JavaScript and Java Permissions NBG6716 User’s Guide 202 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. JavaScript If pages of the we b configurator do not display properly in Interne t Explorer , check that Jav aScript are allowed. 1 In Internet Explorer , click Tools , Internet Opti ...

  • ZyXEL NBG6716 - page 203

    Appendix A Pop-up Windows, JavaScrip t and Java Permissions NBG6716 User’s Guid e 203 Figure 134 Security Settings - Jav a Scripting Java Permissions 1 From Internet Explorer , click Tools , Internet Options and then th e Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM . 4 Under Java permissions make sure that a sa ...

  • ZyXEL NBG6716 - page 204

    Appendix A Pop-up Windows, JavaScript and Java Permissions NBG6716 User’s Guide 204 Figure 135 Security Settings - Jav a JA V A (Sun) 1 From Internet Explorer , click Tools , Internet Options and then th e Advanced ta b. 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected. 3 Click OK to close the window. Figure 136 Java (S ...

  • ZyXEL NBG6716 - page 205

    Appendix A Pop-up Windows, JavaScrip t and Java Permissions NBG6716 User’s Guid e 205 Mozilla Firefox Mozilla Firefox 2.0 screens are used here. Screens for other v ersions may vary slightly . The steps below apply to Mozilla Firefox 3.0 as well. Y ou can enable Java, Jav ascript and pop-ups in one screen. Click Tools, then click Options in the s ...

  • ZyXEL NBG6716 - page 206

    Appendix A Pop-up Windows, JavaScript and Java Permissions NBG6716 User’s Guide 206 Opera Opera 10 screens are used here. Screens for o ther versions may v ary slightly . Allowing Pop-Ups From Opera, click Tools , then Preferences . In the General tab, go to Choose how you prefer to handle pop-ups and select Open all pop-ups . Figure 139 Opera: A ...

  • ZyXEL NBG6716 - page 207

    Appendix A Pop-up Windows, JavaScrip t and Java Permissions NBG6716 User’s Guid e 207 Figure 140 Opera: Enabling Java T o customize Jav aScript behavior in the Oper a browser , click JavaScript Options . Figure 141 Opera: Jav aScript Options Select the items you want Opera’ s JavaScript to apply . ...

  • ZyXEL NBG6716 - page 208

    Appendix A Pop-up Windows, JavaScript and Java Permissions NBG6716 User’s Guide 208 ...

  • ZyXEL NBG6716 - page 209

    NBG6716 User’s Guid e 209 A PPENDIX B Setting Up Y our Computer ’ s IP Address Note: Y our specific NBG6716 may not support all of the operating syst ems described in this appendix. See the product specifications for more information about which operating syst ems are supported. This appendix shows you how to configure the IP se ttings on your ...

  • ZyXEL NBG6716 - page 210

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 210 2 In the Control Panel , click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties . 4 On the General tab, select Internet Protocol (TCP/I P) and then click Properties . ...

  • ZyXEL NBG6716 - page 211

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 21 1 5 The Internet Protocol TCP/IP Properties window opens. ...

  • ZyXEL NBG6716 - page 212

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 212 6 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically . Select Use the following IP Address and fill in the IP address , Subnet mask , and Default gateway fields if you have a static IP address that was assign ...

  • ZyXEL NBG6716 - page 213

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 213 Windows V ist a This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel . 2 In the Control Panel , click the Network and Internet icon. 3 Click the Network and Sharing Center icon. 4 Click Manage network connections . ...

  • ZyXEL NBG6716 - page 214

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 214 5 Right-click Local Area Connection and then select Properties . Note: During this procedure, cl ick Continue whenever Windows displa ys a screen saying that it needs your permission to continue. 6 Select Internet Protocol Version 4 (TCP/IPv 4) and then select Properties ...

  • ZyXEL NBG6716 - page 215

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 215 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. ...

  • ZyXEL NBG6716 - page 216

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 216 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically . Select Use the following IP Address and fill in the IP address , Subnet mask , and Default gateway fields if you have a static IP address that was assign ...

  • ZyXEL NBG6716 - page 217

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 217 Windows 7 This section shows screens from Windows 7 Enterprise. 1 Click Start > Control Panel . 2 In the Control Panel , click View network status and tasks under the Network and Intern et category . 3 Click Change adapter settings . 4 Double click Local Area Connecti ...

  • ZyXEL NBG6716 - page 218

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 218 Note: During this procedure, cl ick Continue whenever Windows displa ys a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv 4) and then select Properties . ...

  • ZyXEL NBG6716 - page 219

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 219 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. ...

  • ZyXEL NBG6716 - page 220

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 220 7 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically . Select Use the following IP Address and fill in the IP address , Subnet mask , and Default gateway fields if you have a static IP address that was assign ...

  • ZyXEL NBG6716 - page 221

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 221 Mac OS X: 10.3 and 10.4 The screens in this section are from Ma c OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferen ces . 2 In the System Preferen ces window , click the Network icon. ...

  • ZyXEL NBG6716 - page 222

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 222 3 When the Network preferences pane opens, select Built-in Et hernet from the network connection type list, and then click Config ure. 4 For dynamically assigned settings, select Using DHCP from the Configur e IPv4 list in the TCP/IP tab. ...

  • ZyXEL NBG6716 - page 223

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 223 5 For statically assigned settings, do the following: •F r o m t h e Configure IPv4 list, select Manually . •I n t h e IP Address field, type your IP address. •I n t h e Subnet Mask field, type y our subnet mask. •I n t h e Router field, type the IP address of yo ...

  • ZyXEL NBG6716 - page 224

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 224 Figure 142 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Ma c OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferen ces . 2 In System Preferen ces , click the Network icon. ...

  • ZyXEL NBG6716 - page 225

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 225 3 When the Network preferences pane opens, select Ethernet from the list of av ailable connection types. 4 From the Configure list, select Using DHCP for dynamically assigned settings. ...

  • ZyXEL NBG6716 - page 226

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 226 5 For statically assigned settings, do the following: •F r o m t h e Configure list, select Manually . •I n t h e IP Address field, enter your IP address. •I n t h e Subnet Mask field, enter y our subnet mask. •I n t h e Router field, enter the IP address of your ...

  • ZyXEL NBG6716 - page 227

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 227 Figure 143 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure y our comp uter’s T CP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux di stribution. The procedure, screens and file locations ma ...

  • ZyXEL NBG6716 - page 228

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 228 3 In the Authenticate window, enter y our admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties . ...

  • ZyXEL NBG6716 - page 229

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 229 5 The Properties dialog box opens. •I n t h e Configuration list, select Automatic Configuration (DHCP ) if you have a dynamic IP address. •I n t h e Configuration list, select Static IP address if you have a static IP address. Fill in the IP address , Subnet mask , ...

  • ZyXEL NBG6716 - page 230

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 230 8 Click the Close button to apply the changes. V erifying Settings Check your TCP/IP properties by clicking System > Ad ministrati on > Network Tools , and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data ...

  • ZyXEL NBG6716 - page 231

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 231 Figure 144 Ubuntu 8: Network T ools Linux: openSUSE 10.3 (KDE) This section shows you how to configure y our computer’s T CP/IP settings in the K Desktop Environment (KDE) using the open SUSE 10.3 Linux distribution. Th e procedure, screens and file locations may vary ...

  • ZyXEL NBG6716 - page 232

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 232 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK . 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. ...

  • ZyXEL NBG6716 - page 233

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 233 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. 5 When the Network Card Setup window opens, click the Address tab ...

  • ZyXEL NBG6716 - page 234

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 234 Figure 145 openSUSE 10.3: Netw ork Card Setup 6 Select Dynamic Address (DHCP) if you have a dyn amic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address , Subnet mask , and Hostname fields. 7 Click Next to save the cha ...

  • ZyXEL NBG6716 - page 235

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guid e 235 9 Click Finish to save your settings and close the window . V erifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Conne ction Informatio n . Figure 146 openSUSE 10.3: KN etwork Manager ...

  • ZyXEL NBG6716 - page 236

    Appendix B Setting Up Your Computer’s IP Address NBG6716 User’s Guide 236 Figure 147 openSUSE: Connection Status - KNetwork Manage r ...

  • ZyXEL NBG6716 - page 237

    NBG6716 User’s Guid e 237 A PPENDIX C Common Services The following table lists some commonly-used services and their associated protocols and port numbers. For a comprehensive list of port number s, ICMP t ype/code numbers and services, visit the IANA (I nterne t Assigned Number Authority) web site. • Name : This is a short, descriptive name f ...

  • ZyXEL NBG6716 - page 238

    Appendix C Common Services NBG6716 User’s Guide 238 HT TP TCP 80 Hyper T ext T ransfer Protocol - a client/ server protocol for the worl d wide web. HT TPS TC P 44 3 HTTPS is a secure d http session often used in e-commer ce. ICMP User-Defined 1 Internet Control Message Protocol is often used for diagnostic or routing purposes. ICQ UDP 4000 This ...

  • ZyXEL NBG6716 - page 239

    Appendix C Common Services NBG6716 User’s Guid e 239 SMTP TCP 25 Simple Mail T ransfer Protocol is the message-exchange standard for the Internet. SMTP enab les y ou to move messages from one e-mail server to another . SNMP TCP/ UD P 161 Simple Network M anagement Progr am. SNMP- TRAPS TCP/ U D P 162 T raps for use with the SNMP (RFC:1 215). SQL ...

  • ZyXEL NBG6716 - page 240

    Appendix C Common Services NBG6716 User’s Guide 240 ...

  • ZyXEL NBG6716 - page 241

    NBG6716 User’s Guid e 241 A PPENDIX D Legal Information Copyright Copyright © 2013 by Z yXEL Communications Corpor ation. Th e c o n te n ts of t h is p ub li c a ti o n m ay n ot b e r e pr o du c ed i n a n y p a rt or a s a w ho l e, t ra ns c ri b ed , st o re d in a re t ri e va l s y st e m, t r anslated into any language, or tr ansmitted ...

  • ZyXEL NBG6716 - page 242

    Appendix D Legal Informa tion NBG6716 User’s Guide 242 依據 低功 率 電波 輻 射性電機管 理 辦法 第十二條 經型式認證 合格之低功 率 射頻電機，非經許可，公司 、商號或使用 者均 不 得擅自變 更 頻 率 、加大功 率 或變 更 原設計之特性及功能。 第十四條 低功 率 射頻電機? ...

  • ZyXEL NBG6716 - page 243

    Appendix D Legal Informa tion NBG6716 User’s Guid e 243 National Restrictions This prod uct may be us ed in al l EU count ries (and other coun tries fo llowing th e EU dire ctive 1999 /5/EC) wi thout any limitatio n except for the count ries mentio ned below: Ce produit peut être utilisé dans tous les pays de l’UE (et da ns tous les pays ayan ...

  • ZyXEL NBG6716 - page 244

    Appendix D Legal Informa tion NBG6716 User’s Guide 244 Belgium The Belgian Institute fo r Postal Services an d T elec ommunicati ons (BIPT) must be notified of a ny outdoor wire less link havin g a ran ge exceeding 300 meters. Please check http://w ww.bipt.be for more details. Draadloze verbindingen voor buiteng ebruik en met een re ikwijdte van ...

  • ZyXEL NBG6716 - page 245

    Appendix D Legal Informa tion NBG6716 User’s Guid e 245 • Do NOT at tempt to repair the power adap tor or cord. Contact your l ocal vendor to order a new one. • Do not use t he device outs ide, and make sure all the co nnections are indoors. There is a remot e risk of electric shock from li ghtning. • Do NOT obstruct the device ventilati on ...

  • ZyXEL NBG6716 - page 246

    Appendix D Legal Informa tion NBG6716 User’s Guide 246 ...

  • ZyXEL NBG6716 - page 247

    Index NBG6716 User’s Guid e 247 Index A ActiveX 150 Address Assignment 86 AP 15 AP Mode menu 61 status screen 59 AP+Bridge 15 B Bridge/Repeater 15 C certifications 241 notices 242 viewing 242 Channel 51 , 60 channel 94 CIFS 173 Common Internet File System, see CIFS Configuration restore 18 6 content filtering 149 by keyword (in URL) 149 Cookies 1 ...

  • ZyXEL NBG6716 - page 248

    Index NBG6716 User’s Guide 248 bandwidth 177 example 17 7 FTP 176 overview 172 Samba 174 user account 175 , 176 Windows Explorer 174 work group 174 Firewall 144 Firewal l overvi ew guidelines 144 ICMP packets 145 network security Stateful inspection 144 Z yXEL device firewall 144 firewall stateful inspection 143 Firmware upload 184 file extension ...

  • ZyXEL NBG6716 - page 249

    Index NBG6716 User’s Guid e 249 N NA T 127 , 130 global 128 how it works 129 inside 128 local 128 outside 128 overview 127 port forwarding 134 see also Network Address T ranslation server 128 server sets 134 NA T T raversal 165 Navigation P anel 52 , 61 navigation panel 52 , 61 Network Address T ranslation 127 , 130 O operating mode 15 other docu ...

  • ZyXEL NBG6716 - page 250

    Index NBG6716 User’s Guide 250 top traffic flows 156 Subnet Mask 11 9 Summary DHCP table 80 Pack et statistics 81 Wireless station status 82 Sys te m Ge ne ral S et up 181 System restart 187 T TCP/IP configur ation 121 Time setting 183 trademarks 241 trigger port 135 T rigger port forwarding 135 example 13 5 process 135 U Universal Plug and Play ...

Manufacturer ZyXEL Category Router

Documents that we receive from a manufacturer of a ZyXEL NBG6716 can be divided into several groups. They are, among others:
- ZyXEL technical drawings
- NBG6716 manuals
- ZyXEL product data sheets
- information booklets
- or energy labels ZyXEL NBG6716
All of them are important, but the most important information from the point of view of use of the device are in the user manual ZyXEL NBG6716.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ZyXEL NBG6716, service manual, brief instructions and user manuals ZyXEL NBG6716. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ZyXEL NBG6716.

Similar manuals

A complete manual for the device ZyXEL NBG6716, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ZyXEL NBG6716 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ZyXEL NBG6716.

A complete ZyXEL manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ZyXEL NBG6716 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ZyXEL NBG6716, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ZyXEL NBG6716, that we can find in the current document
3. Tips how to use the basic functions of the device ZyXEL NBG6716 - which should help us in our first steps of using ZyXEL NBG6716
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ZyXEL NBG6716
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ZyXEL NBG6716 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ZyXEL NBG6716?

Use the form below

If you did not solve your problem by using a manual ZyXEL NBG6716, ask a question using the form below. If a user had a similar problem with ZyXEL NBG6716 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)