-
Echo PE-230 - page 1
Power Edger Operator's Manual MODEL PE-230 W ARNING X770001002 12/09 X7702090202 Read rules for safe operation and instructions carefully . ECHO provides an Opera- tor's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. ...
-
Echo PE-230 - page 2
2 I n t r o d u c t I o n W elcome to the ECHO family . This ECHO product was designed and manufactured to provide long life and on-the-job- dependability . Read and understand this manual and the SAFETY MANUAL you found in the same package. Y ou will nd both easy to use and full of helpful operations tips and SAFETY messages. t h e o p e r a t ...
-
Echo PE-230 - page 3
P o w e r e d g e r o P e r a t o r ' s M a n u a l 3 s a f e t y m a n u a l s a f e t y s y m b o l s a n d I m p o r t a n t I n f o r m a t I o n Throughout this manual and on the product itself, you will nd safety alerts and helpful informational messages preceded by symbols or key words. The following is an explanation of those symbol ...
-
Echo PE-230 - page 4
4 Physical Condition Y our judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection W ear eye protection that meets ANSI Z87.1 or CE re- quirements whenever you operate the unit. H ...
-
Echo PE-230 - page 5
P o w e r e d g e r o P e r a t o r ' s M a n u a l 5 Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the ngers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repe ...
-
Echo PE-230 - page 6
6 e m I s s I o n c o n t r o l EP A Phase II The emission control system for these engines are EM (Engine Modication). An Emission Control Label is located on the engine. (This is an EXAMPLE ONL Y , information on label varies by engine F AMIL Y). e q u I p m e n t W ARNING Use only ECHO approved attachments. Serious injury may result from the ...
-
Echo PE-230 - page 7
P o w e r e d g e r o P e r a t o r ' s M a n u a l 7 15 16 17 18 19 14 13 20 21 1 2 4 5 6 7 8 9 10 11 3 12 d e s c r I p t I o n Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer . Se ...
-
Echo PE-230 - page 8
8 1. POWER HEAD - Factory assembled. Includes the engine, clutch, fuel system, ignition system and starter . 2. THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. 3. STOP SWITCH - "Slide Switch" mounted on top of the throttle ...
-
Echo PE-230 - page 9
P o w e r e d g e r o P e r a t o r ' s M a n u a l 9 c o n t e n t s The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary . After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged ...
-
Echo PE-230 - page 10
10 B A C D E t h r o t t l e l I n k a g e a n d I g n I t I o n l e a d s 1. Connect ignition stop leads (A) and (B). 2. Place throttle linkage (C) through adjustment xture (D) and install wire end into large carburetor throttle swivel hole (E). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted ...
-
Echo PE-230 - page 11
P o w e r e d g e r o P e r a t o r ' s M a n u a l 11 f u e l NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty . Read and follow instructions in the Storage section of this manual. W ARNING Alternative fuels, suc ...
-
Echo PE-230 - page 12
12 Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, close fuel container , and remix. IMPOR T ANT Spilled fuel is a leading cause of hydrocarbon emissions. Some s ...
-
Echo PE-230 - page 13
P o w e r e d g e r o P e r a t o r ' s M a n u a l 13 s t a r t I n g c o l d e n g I n e W ARNING The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury . Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. 1. ...
-
Echo PE-230 - page 14
14 s t a r t I n g w a r m e n g I n e The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position. W ARNING The attachment should not move at idle, otherwise serious personal injury may result. NOTE If attachment moves, readjust carburetor according to “Carburetor Adju ...
-
Echo PE-230 - page 15
P o w e r e d g e r o P e r a t o r ' s M a n u a l 15 1. Before edging, water the area to soften the ground to make edging easier . 2 Before edging, check the area and remove all obstacles and objects that could be thrown. 3. Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass. NOTE Blad ...
-
Echo PE-230 - page 16
16 m a I n t e n a n c e I n t e r v a l s W ARNING Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow ...
-
Echo PE-230 - page 17
P o w e r e d g e r o P e r a t o r ' s M a n u a l 17 a I r f I l t e r Level 1. T ools r equir ed: 25 or 50 mm (1 or 2 in.) Cleaning brush Parts r equired: REPOWER TM Air & Fuel Filter Kit. 1. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air lter is removed. Brush accumulated d ...
-
Echo PE-230 - page 18
18 s p a r k p l u g Level 2. T ools Requir ed: T -Wrench, feeler gauge, soft metal brush. Parts Requir ed: REPOWER TM T une-Up Kit IMPOR T ANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) other - wise severe engine damage may occur . 1. Remove spark plug and check for fouling, worn and rounded cen- ter electrode. 2. Clean the plug or replace ...
-
Echo PE-230 - page 19
P o w e r e d g e r o P e r a t o r ' s M a n u a l 19 1. Remove spark plug lead. 2. Remove two (2) mufer cover screws and mufer cover (A). 3. Remove screw and arm rest (B). 4. Remove cylinder cover (C). IMPOR T ANT DO NOT use a metal scraper to remove dirt from the cylinder ns. 5. Use brush to remove dirt from the cylinder ns. 6. ...
-
Echo PE-230 - page 20
20 1. Remove two (2) mufer cover screws and mufer cover (A). 2. Place piston at T op Dead Center (TDC) to prevent carbon/dirt from entering cylinder . 3. Remove spark arrestor screen cover (B), gasket (C) and screen (D) from mufer body . 4. Clean carbon deposits from mufer components. NOTE When cleaning carbon deposit, be careful not to ...
-
Echo PE-230 - page 21
P o w e r e d g e r o P e r a t o r ' s M a n u a l 21 NOTE Every unit is run at the factory and the carburetor is set in compli- ance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer . 1. Check idle speed and reset if necessary . If a tachometer is avail- able, idle speed ...
-
Echo PE-230 - page 22
22 A B d r I v e s h a f t l u b r I c a t I o n Level 1. T ools r equir ed: 8 mm Open End Wrench, 4 mm Hex W rench, Clean rag Parts Requir ed: POWER BLENDX TM 8 oz. (P/N 91014) or Lithium Base Grease. 1. Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing. 2. Pull exible cable from t ...
-
Echo PE-230 - page 23
P o w e r e d g e r o P e r a t o r ' s M a n u a l 23 A B C D E F G 5. Remove plug (G) and ll gear case with grease. Install plug. 6. Install inner blade adapter (B) onto PTO shaft (C). 7. Install and center new blade (F) onto inner adapter (B). 8. Install outer adapter (E) and nut (D). T ighten nut (D) rmly , counterclockwise (CCW). IM ...
-
Echo PE-230 - page 24
24 t r o u b l e s h o o t I n g DANGER Fuel vapors are extremely ammable and may cause re and/or explosion. Never test for ignition spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may result. T R A H C G N I T O O H S E L B U O R T M E L B O R P E N I G N E m e l b o r Pk c e h Cs u t a t Se s u a Cy ...
-
Echo PE-230 - page 25
P o w e r e d g e r o P e r a t o r ' s M a n u a l 25 s t o r a g e W ARNING During operation the mufer or catalytic mufer and surrounding cover become hot. Always keep exhaust area clear of ammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. Long T erm Storage (over ...
-
Echo PE-230 - page 26
26 s p e c I f I c a t I o n s MODEL ---------------------------------------------------- PE-230 Length ------------------------------------------------------- 1755 mm (69.1 in.) W idth -------------------------------------------------------- 315 mm (12.4 in.) Height ------------------------------------------------------- 285 mm (1 1.2 in.) W eight ...
-
Echo PE-230 - page 27
P o w e r e d g e r o P e r a t o r ' s M a n u a l 27 w a r r a n t y s t a t e m e n t s ECHO LIMITED W ARRANTY ST A TEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty , provides to the original purchaser that this ECHO product is free from defects in mate rial and ...
-
Echo PE-230 - page 28
28 PURCHASED REP AIR P ARTS, SHORT BLOCKS AND ACCESSORIES ...
-
Echo PE-230 - page 29
P o w e r e d g e r o P e r a t o r ' s M a n u a l 29 ECHO INCORPORA TED EMISSION CONTROL W ARRANTY ST A TEMENT FOR ECHO AND SHINDAIW A BRANDS The Environmental Protection Agency (EP A) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 a ...
-
Echo PE-230 - page 30
30 n o t e s ...
-
Echo PE-230 - page 31
P o w e r e d g e r o P e r a t o r ' s M a n u a l 31 n o t e s ...
-
Echo PE-230 - page 32
DEALER? Call 1-800-432-ECHO 1-800-432-3246 or www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T . ECHO, INCORPORA TED 400 O a k w O O d R O a d L a k e Z u R i c h , iL 60047-1564 www .echo-usa.com S6831 1001001/S68311999999 S75612001001/S75612999999 s e r v I c I n g I n f o r m a t I o n p a r t s / s e r I a l ...
Do you have a question concerning Echo PE-230?
Use the form below
If you did not solve your problem by using a manual Echo PE-230, ask a question using the form below. If a user had a similar problem with Echo PE-230 it is likely that he will want to share the way to solve it.