-
Stovax P8700CFCHEC - page 1
STUDIO C o n v e n t i o n a l F l u e Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Eire) PR0957 Studio (Issue 3 - January 2008) IMPORTANT Do not attempt to burn rubbish in this appliance. This appliance must only be operated with the glass door secured firmly in position. The front casing of this appliance ...
-
Stovax P8700CFCHEC - page 2
2 COVERING THE FOLLOWING MODEL: STUDIO 1 CONVENTIONAL FLUE: 8700CFCHEC 8701CFCHEC P8700CFCHEC P8701CFCHEC PAGE APPLIANCE COMMISSIONING CHECKLIST 3 USER INSTRUCTIONS 4 INSTALLATION INSTRUCTIONS 8 Technical Specifications 8 Site Requirements 11 Installation 13 Commissioning 22 SERVICING INSTRUCTIONS 23 Fault Finding 23 How to replace parts 25 Basic s ...
-
Stovax P8700CFCHEC - page 3
3 FLUE CHECK PASS FAIL 1. Flue is correct for appliance 2. Flue flow test 3. Spillage test GAS CHECK 1. Gas soundness & let by test 2. Standing pressure test mb 3. Appliance working pressure (on High Setting) mb NB All other gas appliances must be operating on full 4. Gas rate m 3 /h 5. Does ventilation meet appliance requirements APPLIANCE COM ...
-
Stovax P8700CFCHEC - page 4
4 USER INSTRUCTIONS 1. GENERAL 1.1 A competent person must carry out installation and servicing. 1.2 In all correspondence, please quote the appliance type and serial number, which can be found on the data badge located on a plate inside the controls compartment 1.3 Do not place curtains above the fire: You must have 300mm (1’) clearance between ...
-
Stovax P8700CFCHEC - page 5
5 USER INSTRUCTIONS Turning the Studio Off 2.3 TEMP MODE The display shows the current room temperature. To increase or decrease the fire’s output: ? ...
-
Stovax P8700CFCHEC - page 6
6 USER INSTRUCTIONS EMERGENCY SHUT OFF If the batteries fail during use of the fire, move the switch to ? ...
-
Stovax P8700CFCHEC - page 7
7 USER INSTRUCTIONS 5. ARRANGEMENT OF FUEL BED 5.1 If you need to replace pebbles or refill the tray, make sure the pebbles are flattened so they are level with the rim of the tray. TAKE CARE NOT TO SPILL PEBBLES INTO THE PILOT AREA ONLY PEBBLES SUPPLIED BY GAZCO CAN BE USED IN THIS FIRE. 6. FLAME FAILURE DEVICE 6.1 This is a safety feature incorpo ...
-
Stovax P8700CFCHEC - page 8
8 INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION COVERING THE FOLLOWING MODELS: STUDIO 1 CF: STUDIO 2 CF: 8700CFCHEC 8701CFCHEC P8700CFCHEC P8701CFCHEC Model Gas CAT. Gas Type Working Pressure Aeration Injector Gas Rate m 3 /h Input kW (Gross) Country High Low Studio 1 CF 12H Natural G20 20mbar 6 x 10 390 0.657 6.9 4.0 GB, IE Studio 1 CF 13+ Pro ...
-
Stovax P8700CFCHEC - page 9
9 INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION This appliance has been certified for use in countries other than those stated. To install this appliance in these countries, it is essential to obtain the translated instructions and in some cases the appliance will require modification. Contact Gazco for further information. PACKING CHECKLIST Qt ...
-
Stovax P8700CFCHEC - page 10
10 INSTALLATION INSTRUCTIONS TECHNICAL SPECIFICATION 2 Steel Profil Bauhaus STEEL FRAME DIMENSIONS Dimension Studio 1 Studio 2 A 1120 1350 B 675 675 C 646 846 D 320 320 E 177 177 F 237 237 G 25 25 PROFIL FRAME DIMENSIONS Dimension Studio 1 Studio 2 A 846 1046 B 520 520 C 750 950 D 424 424 E 48 48 F 48 48 G 12.5 12.5 BAUHAUS FRAME DIMENSIONS Dimensi ...
-
Stovax P8700CFCHEC - page 11
11 INSTALLATION INSTRUCTIONS SITE REQUIREMENTS 1. FLUE AND CHIMNEY REQUIREMENTS WHEN INSTALLING A FLUE SYSTEM PLEASE REFER TO THE MANUFACTURER’S INSTRUCTIONS. and flues by their tem ...
-
Stovax P8700CFCHEC - page 12
12 INSTALLATION INSTRUCTIONS SITE REQUIREMENTS without a liner, there must be a minimum debris collection area, Diagram 1b AR2006 1b 5.3 DO NOT install onto a combustible wa ...
-
Stovax P8700CFCHEC - page 13
13 IMPORTANT: ? ...
-
Stovax P8700CFCHEC - page 14
14 INSTALLATION INSTRUCTIONS INSTALLATION 3 AR1963 3. STUD WORK INSTALLATION THERE IS AN OPTIONAL DUCT KIT, CODE No. 8572 WHICH CAN BE FITTED AT THE SAME TIME AS THE APPLIANCE INSTALLATION. 3.1 Combustible parts of the stud work must be kept beyond ? ...
-
Stovax P8700CFCHEC - page 15
15 INSTALLATION INSTRUCTIONS INSTALLATION 7 AR1903 correct height, Diagram 8, because no combustible material can be used above the fire 8 AR1904 ? ...
-
Stovax P8700CFCHEC - page 16
16 INSTALLATION INSTRUCTIONS INSTALLATION 13 AR1887 wall plate Because of the high temperatures this fire achieves, it is advisable to use marble slips or similar material between the appliance and the plasterboard Never use a one-piece slip as expansion (even cracking) can occur. If a slip is used, longer screws are needed to secure the appliance. ...
-
Stovax P8700CFCHEC - page 17
17 INSTALLATION INSTRUCTIONS INSTALLATION 20 AR1862 This releases the left-hand side off its hinge pin ...
-
Stovax P8700CFCHEC - page 18
18 INSTALLATION INSTRUCTIONS INSTALLATION 23 AR1965 burner The front of the plate can now be lifted off the screws: ? ...
-
Stovax P8700CFCHEC - page 19
19 INSTALLATION INSTRUCTIONS INSTALLATION grommet in the left side of the loose box The wires are then fed inside the firebox and routed through the available access ? ...
-
Stovax P8700CFCHEC - page 20
20 ? ...
-
Stovax P8700CFCHEC - page 21
21 INSTALLATION INSTRUCTIONS INSTALLATION 36 AR1862 5.5 Using the allen key provided: towards the window centre 37 AR186 ...
-
Stovax P8700CFCHEC - page 22
22 7. COMMISSIONING 7.1 Check the flame picture 7.2 Check the gas pressure ? ...
-
Stovax P8700CFCHEC - page 23
23 IGNITION FUNCTIONAL CHECK 1 (e.g. soot, etc.) which could short the spark, clean the area. ? ...
-
Stovax P8700CFCHEC - page 24
24 SERVICING INSTRUCTIONS FAULT FINDING CHARTS ? ...
-
Stovax P8700CFCHEC - page 25
25 AR1862 3 ...
-
Stovax P8700CFCHEC - page 26
26 SERVICING INSTRUCTIONS REPLACING PARTS 4. GLASS WINDOW 4.1 Remove the two clips and brackets from either side of the frame, Diagram 5 5 AR1864 ...
-
Stovax P8700CFCHEC - page 27
7. MAIN CONTROL ASSEMBLY 7.1 To access the main control assembly, first remove: ...
-
Stovax P8700CFCHEC - page 28
28 SERVICING INSTRUCTIONS REPLACING PARTS 10. GAS VALVE 10.1 To change the gas valve: ...
-
Stovax P8700CFCHEC - page 29
29 SERVICING INSTRUCTIONS REPLACING PARTS 13. MAIN INJECTOR ? ...
-
Stovax P8700CFCHEC - page 30
30 SERVICING INSTRUCTIONS REPLACING PARTS 17. PRESSURE AND LEAK TESTING THE APPLIANCE 14.1 Follow Section 7, Main Control Assembly, 7.1 and 7.2 Diagram 18 18 AR1963 ...
-
Stovax P8700CFCHEC - page 31
31 SERVICING INSTRUCTIONS REPLACING PARTS 18. SHORT SPARES LIST Studio 1 CF Studio 2 CF COMPONENT NG LPG NG LPG PILOT PI0036 PI0037 PI0036 PI0037 MAIN INJECTOR IN0028 IN0040 IN0029 IN0041 BURNER ASSEMBLY GZ6714 GZ6759 GZ6861 GZ6860 AERATION PLATE G20 - GZ3869 G30 - N/A G20-GZ3868 G30 - N/A G25 - GZ4333 G31 - N/A G25 - GZ3270 G31 - GZ3866 MAG UNIT G ...
-
Stovax P8700CFCHEC - page 32
32 SERVICE RECORDS 1ST SERVICE Date of Service:........................................................................... Next Service Due:....................................................................... Signed:........................................................................................ ...
-
Stovax P8700CFCHEC - page 33
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG Tel: (01392) 261999 Fax: (01392) 444148 E-mail: info@gazco.com A member of the Stovax Group ...
Do you have a question concerning Stovax P8700CFCHEC?
Use the form below
If you did not solve your problem by using a manual Stovax P8700CFCHEC, ask a question using the form below. If a user had a similar problem with Stovax P8700CFCHEC it is likely that he will want to share the way to solve it.