-
Fantom Vacuum FM766HG - page 1
REPLACEMENT PAR TS IMPORT ANT SAFETY INSTRUCTIONS NAME OF EACH P ART PREPARA TION BEFORE USE USING THE VACUUM CLEANER USING THE A TTACHMENTS EMPTYING THE DUST COMP ARTMENT CLEANING THE FILTERS CLEARING BLOCKAGES IN THE SUCTION HOSE AND CLEANING THE AGITA TOR ASSEMBLY REPLACEMENT INSTRUCTIONS TROUBLESHOOTING LIMITED WARRANTY Contents 1 3 4 6 8 10 11 ...
-
Fantom Vacuum FM766HG - page 2
IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING - T o reduce the risk of fire, electric shock or injury: 1. Do not leave the vacuum cleaner when plugged in. Unplug it from the outlet when not in use ...
-
Fantom Vacuum FM766HG - page 3
2 16. Do not touch the agitator while it is spinning. 17. Do not place any heavy items on top of the vacuum cleaner. 18. Do not step on the hose or pull it too strongly . 19. Do not pick up items such as pieces of waste paper or cloth which looks as though they may cause the hose to become blocked. 20. Do not clean or store the vacuum cleaner in pl ...
-
Fantom Vacuum FM766HG - page 4
3 NAMES OF EACH P ART W ARNING: Operate vacuum cleaner only at the voltage specified on name plate. FRONT REAR Set the O N/OFF switch to " ON " to light the headlight. Cleaning Utensil Headlight Handle Suction Hose A Dust Compartment Carrying Handle Duster Knob ON/OFF Switch Release Button A Release Button B Release Button C Suction Hose ...
-
Fantom Vacuum FM766HG - page 5
Handle Wa nd Crevice T ool Upholstery T ool & Dusting Brush Duster Hose Cuff Suction Inlet Suction Hose A Caution : Do not connect the power cord plug to the wall outlet until assembly is completed. Attaching the ha ndle PREP ARA TIONS BEFORE USE Attaching th e suction hose A & a ttachments 4 1 2 Set the vacuum cleaner to the upright positi ...
-
Fantom Vacuum FM766HG - page 6
5 PREP ARA TIONS BEFORE USE WINDING THE POWER CORD 1 Wind the p ower cord around the co rd sto rage hooks. Secure the power cord plug on the power cord. Cord Storage Hooks THERMAL SAFETY DEVICE IN MAIN BODY T o protect your vacuum cleaner motor from overheating, a thermal safety device has been built in. If your vacuum cleaner hose or air intake cl ...
-
Fantom Vacuum FM766HG - page 7
Handle Release Lever Handle Release Lever Parallel position This position is used for cleaning under furniture. 6 USING THE V ACUUM CLEANER ADJUSTING THE HANDLE Upright po sition The handle is normally locked in this The handle of this vacuum cleaner can be set to one of three positions -Upright, Normal, Parallel. Place your foot on handle release ...
-
Fantom Vacuum FM766HG - page 8
Rug/Floor (T ools) SELECTOR EDGE CLEANING This vacuum c leaner is equipped with an "edge cleaning" function for c leaning ca rpet edges near baseboards and stationary furniture. 7 1 2 RUG/FLOOR (T OOLS)SELECT OR The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on and in the upright position. When cle ...
-
Fantom Vacuum FM766HG - page 9
Holder Mount Hose Holder Release Button C Wan d Crevice T ool Duster Attachment Clamp Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position. 1 2 3 USING THE A TT ACHMENTS Press the release button C to disconnect the handle from the vacuum cleaner . Remove the attachments from the vacuum cleaner. C ...
-
Fantom Vacuum FM766HG - page 10
Hose Cuff Suction Inlet Suction Hose A USING THE A TT ACHMENTS 9 Hose Attachment Line up notches push hose in till it clicks. Handle ...
-
Fantom Vacuum FM766HG - page 11
Projection Groove MAX mark 1 1 2 3 2 4 1 2 Trapdoor Release Lever Duster Handle Turn the duster handle several times in the direction shown to empty the dust compartment. EMPTYING THE DUST COMP ARTMENT Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before cleaning. Empty ...
-
Fantom Vacuum FM766HG - page 12
Remove the dust compartment.(refer to page 11) Clean the filter fins free of dirt with the forked end of cleaning utensil as shown. Prefilter Dust Compartment Ribs Main Filter 1 1 CLEANING THE FIL TERS 2 Set the dust compartment to the parallel position.Open the trapdoor,then push the release button E and pull out the main filter. 3 Clean the main ...
-
Fantom Vacuum FM766HG - page 13
Bypass V alve (Inside) Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect Cleaning the agitator assembly 1 2 3 CLEARING BLOCKAGES AND CLEANING THE A GIT A T OR ASSEMBL Y the power cord from the wa ll outlet before clearing any blockages in the suction hose and cleaning th e agitator assembly . Cleaning blockag ...
-
Fantom Vacuum FM766HG - page 14
REPLACING THE HEADLIGHT LAMP REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below . 1 Set the vacuum cleaner to the parallel position. 2 Loosen the screws to remove the lens. 3 When removing the headlight lamp, be ...
-
Fantom Vacuum FM766HG - page 15
Place a new flat belt onto the motor shaft and pulley. 1 2 3 4 5 REPLACEMENT INSTRUCTIONS Caution: Be sure to turn the O N/OFF swit ch to the"OFF" position a nd dis connect the po wer cord fro m the wall outlet before replacing an y of the parts be low . REPLACING THE FLA T BEL T Remove the bottom plate. (refer to page 15) Lift out the ag ...
-
Fantom Vacuum FM766HG - page 16
Loosen Screw Latch Mounting screw Projection Groove Tight en Screw Latch Bottom Plate 15 1 1 REPLACEMENT INSTRUCTIONS REMOVING THE BOTT OM PLA TE Set the vacuum cleaner to the parallel position and turn it over . REA TT ACHING THE BOTT OM PLA TE Insert the projection on the bottom plate into the groove on the nozzle housing and set the bottom plate ...
-
Fantom Vacuum FM766HG - page 17
Filter Cover Seal 1 1 1 1 2 2 HEP A Filter 2 2 1 1 Sub-Filter Air Inlet Cover Caution: Be sure that seal on the HEPA filter is inserted towards the inside of the vacuum cleaner. The filter cover should be correctly oriented when it is reattached. Do not reattach it upside down. 3 Insert a new HEPA filter with the seal to the inside of the vacuum cl ...
-
Fantom Vacuum FM766HG - page 18
If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and ...
-
Fantom Vacuum FM766HG - page 19
In US: FANTOM, 94 Main Mill Street, Door 16, Plattsburgh, N.Y . 12901 RETURN TO FANTOM , 94 Main Mill Street, Door 16 , Plattsburgh , N.Y . 12901 OWNERSHIP REGISTRA TION CARD Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product safe ...
Do you have a question concerning Fantom Vacuum FM766HG?
Use the form below
If you did not solve your problem by using a manual Fantom Vacuum FM766HG, ask a question using the form below. If a user had a similar problem with Fantom Vacuum FM766HG it is likely that he will want to share the way to solve it.