English dropdown-ico

Manual JVC DT-V21G11Z

32 pages 3.12 mb
Download

Go to site of 32

Summary
  • JVC DT-V21G11Z - page 1

    MULTI FORMAT LCD MONITOR DT- V21G11Z INSTRUCTIONS LCT2681-001A For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : DT-V21G11Z Serial No. : DTV21G11_LCT2681.indb 1 DTV21G11_LCT2681.indb 1 12.2.5 10:16:25 AM 12.2.5 10:16:25 AM ...

  • JVC DT-V21G11Z - page 2

    2 Safety Precautions CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. RISK OF ELECTRICAL SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsul ...

  • JVC DT-V21G11Z - page 3

    3 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel. Do not use the product for a long time if the sound is distorted. The AC power supply is controlled by turning on/off the POWER switch on the rear panel. If the pr ...

  • JVC DT-V21G11Z - page 4

    4 Safety Precautions (cont.) European Union only Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany Informati ...

  • JVC DT-V21G11Z - page 5

    5 Caution for use of the product for many hours In the case that you use the monitor for many hours, we recommend that you set “NO SYNC ACTION” in “SYNC FUNCTION” to “P.SAVE” in MAIN MENU. This will reduce power consumption and relieve strain on the monitor. ( ☞ page 17) Also, we recommend that you use "LCD SAVER" function t ...

  • JVC DT-V21G11Z - page 6

    6 Installation ● How to set up 1 You can tilt the monitor as follows. ● Be careful not to pinch your fingers in the gap between the monitor and the stand. ● When the stand plate is attached to the lower position of the stand body, you cannot tilt the monitor downward. ● How to set up 2 When the stand plate is attached to the higher position ...

  • JVC DT-V21G11Z - page 7

    7 3 Be sure to fix the bottom plate using screws (not provided). Use two holes or more on one side and four holes (6 – ø 8) or more on both sides of the bottom plate of the stand. 1 Remove the bottom plate of the stand from the stand body. 2 Remove the bottom plate of the stand from the stand body. ● To install the monitor on a shelf or any ot ...

  • JVC DT-V21G11Z - page 8

    8 Connections 1 AC IN terminal AC power input connector. Connect the provided AC power cord to an AC outlet. ● Attach the provided power cord holder to prevent accidental disconnection of the AC power cord. ( ☞ below) ● Please review "Safety Precautions (a grounding type plug)" on page 4 carefully. Caution: Do not connect the power ...

  • JVC DT-V21G11Z - page 9

    9 Front panel 1 Speakers (stereo) The speakers emit the same audio signal emitted from the AUDIO (MONITOR OUT) terminals. ( ☞ 7 “AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)” on page 8) 2 VOLUME adjustment knob Adjusts the volume. 3 Picture adjustment knob PHASE: Adjusts the picture hue. CHROMA: Adjusts the picture color density. BRI ...

  • JVC DT-V21G11Z - page 10

    10 6 MENU button Activates/deactivates the display of the MAIN MENU ( ☞ “Menu Operations” on page 13). 7 COLOR OFF button/lamp Displays only the luminance signal. ● This function does not work for RGB input signals. 8 1:1 button/lamp Displays the picture in the original resolution of the input signal. ● The aspect ratio of the picture may ...

  • JVC DT-V21G11Z - page 11

    11 Audio Channel Selection Select audio channels emitted from the speakers (L/R) and the AUDIO MONITOR OUT(OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the SDI terminal and SDI input is selected. ● You have to choose a group of selectable audio channels before the channel selection ( ☞ “E.AUDIO GROUP” in “AUDIO SETTI ...

  • JVC DT-V21G11Z - page 12

    12 On the Status Display If you press the INPUT SELECT button ( ☞ t on page 10) currently lit, the status of the input signal and setting of MUTING are displayed for about 3 seconds. ● Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION.” ( ☞ page 21) ● When “STATUS DISPLAY” is set to “AUTO” o ...

  • JVC DT-V21G11Z - page 13

    13 Menu Operations 1 Display the menu. To display the MAIN MENU Press MENU button. To display the SET-UP MENU Press button while holding button. 2 Press buttons to select an item, then press button. ● For some items, adjustments will be made by pressing . 3 Press buttons to select an item, then press buttons to make adjustments. 4 Press MENU butt ...

  • JVC DT-V21G11Z - page 14

    14 Setting the menu (cont.) MAIN MENU PICTURE FUNCTION Setting for the picture quality. Item Content Setting value APERTURE * 1 Activates/deactivates the function at the level set in “APERTURE LEVEL.” OFF, ON APERTURE LEVEL * 1 Simultaneously corrects the frequency characteristics of the RGB colors. 01 – 10 CTI Adjust the clearness of the out ...

  • JVC DT-V21G11Z - page 15

    15 MARKER *1*2 Settings for marker functions. Item Content Setting value 1/2 AREA MARKER * 3 Activate/deactivate the area marker and select the style of it. The setting values and features are as follows. OFF LINE HALF HALF+L BLK. BLK.+L OFF LINE HALF HALF+L BLK. BLK.+L : : : : : : Deactivate the marker. Displays the area with an outline. The area ...

  • JVC DT-V21G11Z - page 16

    16 Setting the menu (cont.) AUDIO SETTING Settings for the audio output balance, EMBEDDED AUDIO signals and level meter. Item Content Setting value BALANCE Adjust the balance between the right and left speakers. L5 – L1, 0, R1 – R5 E.AUDIO GROUP * 1 Select the audio channel group of the EMBEDDED AUDIO signals. The setting values and selectable ...

  • JVC DT-V21G11Z - page 17

    17 SCOPE SETTING * 1 Configure the settings for the wave form monitor and vector scope. Item Content Setting value GAIN Adjust the input gain level. –10 – +10 SIZE * 2 Set the window size. NORMAL, LARGE POSITION * 2 Select the window position. 1 (Lower right), 2 (Lower left) 3 (Upper left), 4 (Upper right) TRANSPARENT Activates/deactivates the ...

  • JVC DT-V21G11Z - page 18

    18 Setting the menu (cont.) SET-UP MENU FUNCTION SETTING Configure the sub menu display, the lighting color of the tally lamp, the size of images, the brightness of the button lamps. Item Content Setting value sub menu POSI. Select the contents and displaying position of “ sub menu. ” The setting values and features are as follows. LOWER1 : Dis ...

  • JVC DT-V21G11Z - page 19

    19 PICTURE SUB ADJ. Configure the standard level of image adjustment. Item Content Setting value CONTRAST * 1 Adjust the standard level for the contrast adjusted with the CONTRAST knob on the front panel. – 20 – +20 BRIGHT * 1 Adjust the standard level for the brightness adjusted with the BRIGHT knob on the front panel. – 20 – +20 CHROMA * ...

  • JVC DT-V21G11Z - page 20

    20 Setting the menu (cont.) REMOTE SETTING ( ☞ “External Control” on pages 22) Settings for the external control. Item Content Setting value SERIAL TYPE Select the input terminal used for external control by serial communication. RS232C RS485 PARALLEL TYPE Select the external control method for the MAKE/TRIGGER terminal. MAKE, TRIGGER, SET PI ...

  • JVC DT-V21G11Z - page 21

    21 INFORMATION Settings for the information display of the monitor. Item Content Setting value POSITION Select the position to show the information display ( ☞ “On the Information Display” on page 11). UPPER LOWER SOURCE ID Select whether the name assigned in “CHARACTER SET.” is displayed on the screen ( ☞ “On the Information Display? ...

  • JVC DT-V21G11Z - page 22

    22 External control About the external control This monitor has three external control terminals. ● MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. 1 MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin terminal to the GND pin terminal, or disconnecting (opening) it. 2 TRI ...

  • JVC DT-V21G11Z - page 23

    23 <Functions controlled by the MAKE/TRIGGER system> Display Functions to be controlled Opening Short-circuiting TALLY SEL Selects the color of the tally lamp Green Red SDI 1 Changes the input to “SDI 1” Invalid Valid SDI 2 Changes the input to “SDI 2” Invalid Valid DVI Changes the input to “DVI” Invalid Valid Display Functions to ...

  • JVC DT-V21G11Z - page 24

    24 External Control (cont.) Using the serial communication You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal. ● Consult your dealer for the details of the external control specification. <Communication specifications> Input terminal Cable Terminal specification Communication specifications RS-485 A ...

  • JVC DT-V21G11Z - page 25

    25 <Basic command list> No. Commands Functions Data 1 ! ** * 1 B C N 1 Cr Starts communication (connection) No data 2 ! ** * 1 B C N 0 Cr Terminates communication (termination) No data 3 ! ** * 1 BI D S E T x x * 2 Cr Assigns the control ID 01 – 99 4 ! ** * 1 B I D R E T Cr Initializes the control ID No data 5 ! ** * 1 BI D D S P x x * 2 Cr ...

  • JVC DT-V21G11Z - page 26

    26 Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the probl em, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page Cannot turn on the unit. ● Press the button to turn it on. ● Plugs should be firmly insert ...

  • JVC DT-V21G11Z - page 27

    27 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem. When the screen goes blank, and on ...

  • JVC DT-V21G11Z - page 28

    28 Specifications General Model name DT-V21G11Z Type MULTI FORMAT LCD MONITOR Screen size Type 21 wide format Aspect ratio 16:9 Compliant video signal format ☞ “Available signals” on page 29 Format 3G SDI DUAL LINK HD SDI HD SDI SD SDI EMBEDDED AUDIO : : : : : SMPTE424M/SMPTE425M SMPTE372M BTA S-004C, SMPTE292M ITU-R BT.656: 525/625 SMPTE259M ...

  • JVC DT-V21G11Z - page 29

    29 Available signals The following signals are available for this monitor. Video signals No. Signal name Signal format shown in the status display ( ☞ page 12) Input terminal VIDEO COMPO. (Analog component)* 1 E. AUDIO SDI (IN 1, IN 2)* 2 DVI-D (HDCP) (Digital component/ Digital RGB) SD/HD (1.5G) 3G SDI DUAL LINK 1 NTSC NTSC √ — — — — ? ...

  • JVC DT-V21G11Z - page 30

    30 Dimensions Unit: mm (inch) <Front view> <Side view> <Rear view> Computer signals (preset) DVI-D (HDCP) terminals No. Signal name Resolution Frequency Scan system Horizontal Vertical Horizontal (kHz) Vertical (Hz) 1 VGA60 640 480 31.5 59.9 Non-interlace 2 WVGA60 852 480 31.5 59.9 Non-interlace 3 SVGA60 800 600 37.9 60.3 Non-inte ...

  • JVC DT-V21G11Z - page 31

    31 MEMO DTV21G11_LCT2681.indb 31 DTV21G11_LCT2681.indb 31 12.2.5 10:17:24 AM 12.2.5 10:17:24 AM ...

  • JVC DT-V21G11Z - page 32

    1211TMH-MW-MT MUL TI FORMA T L CD MONIT OR DT - V21G11Z © 2012 JVC KENWOOD Corporation DTV21G11_LCT2681.indb 32 DTV21G11_LCT2681.indb 32 12.2.5 10:17:25 AM 12.2.5 10:17:25 AM ...

Manufacturer JVC Category Flat Panel Television

Documents that we receive from a manufacturer of a JVC DT-V21G11Z can be divided into several groups. They are, among others:
- JVC technical drawings
- DT-V21G11Z manuals
- JVC product data sheets
- information booklets
- or energy labels JVC DT-V21G11Z
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC DT-V21G11Z.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC DT-V21G11Z, service manual, brief instructions and user manuals JVC DT-V21G11Z. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC DT-V21G11Z.

Similar manuals

A complete manual for the device JVC DT-V21G11Z, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC DT-V21G11Z by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC DT-V21G11Z.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC DT-V21G11Z - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC DT-V21G11Z, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC DT-V21G11Z, that we can find in the current document
3. Tips how to use the basic functions of the device JVC DT-V21G11Z - which should help us in our first steps of using JVC DT-V21G11Z
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC DT-V21G11Z
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC DT-V21G11Z in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC DT-V21G11Z?

Use the form below

If you did not solve your problem by using a manual JVC DT-V21G11Z, ask a question using the form below. If a user had a similar problem with JVC DT-V21G11Z it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)