English dropdown-ico

Manual Wybron Transition Optic

19 pages 0.92 mb
Download

Go to site of 19

Summary
  • Wybron Transition Optic - page 1

    TRANSI TION CMY Fiber Optic Illuminator CMY with TW -White light with WT -White light Transition User Manual ...

  • Wybron Transition Optic - page 2

    2 Table of Contents Declaration of Conformity………………………………………………..3 Safety Notice………………………………………………………………4 Introduction to Transition…………………………………………………7 Transition Quick Start configuration………………………………… ...

  • Wybron Transition Optic - page 3

    3 ...

  • Wybron Transition Optic - page 4

    4 Safety Notice SAVE THESE INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS This manual gives step-by-step instructions for preparation, setup, and operation of the Transition TM Fiber Illuminator. There is a potential risk of fire, electric shock or injury to persons if the product is not used as instructed. The Transition Fiber Illuminator is to be ...

  • Wybron Transition Optic - page 5

    5 ...

  • Wybron Transition Optic - page 6

    6 Intro to the Transition ...

  • Wybron Transition Optic - page 7

    7 Transition Product Introduction Wybron is pleased to announce the introduction of the Transition fiber illuminator. Contained within a small easy to integrate package and ultra bright fiber optic illuminator, the Transition brings quality and durability to your venue. In addition, the Transition is designed to be an integral component of Wybron? ...

  • Wybron Transition Optic - page 8

    8 Transition Quick Start Configuration 1. Connect the Equipment a) Connect fiber bundle common end to the Transition output port. b) Connect the Transition to a DMX source with a 5-pin cable c) Connect to AC power (110 – 240 VAC 50/60Hz) 2. Control Transition with DMX Leave Transition addressed at channel 1 (factory default) DMX channel 1 control ...

  • Wybron Transition Optic - page 9

    9 Transition Specifications Model 8670: Transition CMY Fiber Illuminator Features:  No lamp optimization required  Rubber feet for cabinet or countertop installation  Durable all metal construction  Output supports fiber bundles ranging from 17 – 30 mm dia.  High output 150W UHI compact arc source  Legendary Wybron Reliability D ...

  • Wybron Transition Optic - page 10

    10 Fixture Setup and Configuration Installing the Lamp DANGER: Disconnect fixture from line voltage before replacing lamp. CAUTION: Lamp and lamp mounting surfaces are hot! Allow lamp to cool 10 minutes before replacing Lamp Specifications Lamp socket / base: G22 Part# UHI-S150DW/A/UVP Lamp, Eurospot UHI Series 3000K 150W UHI-S150DM/A/UVP Lamp, Eur ...

  • Wybron Transition Optic - page 11

    11 Maximum ambient temperature (t a ) may not exceed 40˚C (104˚F) Keep objects at least 2” (50mm) from sides of the fixture. Keep objects at least 6” from the top of the fixture. Cabinet or Closet Mounting The Transition may be mounted in a closet or cabinet on a hard surface such as wood, laminate, or metal. Do not mount the Transition on so ...

  • Wybron Transition Optic - page 12

    12 DMX / RDM Setup and Operation Controls and Indicators Transition controls and indicators as follows: o A three character seven-segment display o 4 push buttons: Menu , ( + ), ( - ), and Enter o Power (red) and signal (green) indicator LED’s The seven-segment display shows the address number (1-508) and the Demo mode (OFF, d1, d2). It also disp ...

  • Wybron Transition Optic - page 13

    13 Display Messages Normal Messages 680 Displayed for 1 second after power is applied. This is the RDM manufacturer device identification number Ini Indicates that the unit is initializing the diachronic filters 001 – 508 The first DMX address Transition will respond to. Adr Top menu item. Pressing ‘Enter’ here will allow the current DMX addr ...

  • Wybron Transition Optic - page 14

    14 EEP Err An attempt to write to non-volatile memory failed. The unit will continue to respond to commands. SEr Err The RDM unique ID has been corrupted. The unit will operate normally but should not be used in an RDM environment. Contact dealer or factory for assistance. RDM Functionality Transition is compliant with the RDM v1.0 standard and can ...

  • Wybron Transition Optic - page 15

    15 Service Lamp Replacement DANGER: Disconnect fixture from line voltage before replacing lamp. WARNING: Lamp and lamp mounting surfaces are hot! Allow lamp to cool before replacing.  Disconnect fixture from AC power.  Remove lamp plate by removing mounting screws as shown in figure 1.1 and pull lamp assembly straight back from reflector.  ...

  • Wybron Transition Optic - page 16

    16 Cleaning the Color Filters It is recommended that the color filters be only cleaned with low-pressure air without disassembling the color filters from the motor shafts. If the color module must be disassembled to clean the dichroic filters take careful note of the location and offset height of the individual color flags. Color filters must be re ...

  • Wybron Transition Optic - page 17

    17 Flash Reprogramming Transition firmware can be updated as new firmware versions become available through the DMX/RDM port using an Infogate gateway and the Infogate application. Transition firmware updates can be found at www.wybron.com . Specific instructions for upgrading firmware in Transition and other Wybron equipment can be found in the In ...

  • Wybron Transition Optic - page 18

    18 Warranty Information WYBRON, INC. warrants to the original owner or retail customer that for a period of one year from date of delivery of a portable system or energization of a permanently installed system (up to a maximum of 18 months from delivery) its products will be free from defects in materials and workmanship under normal use and servic ...

  • Wybron Transition Optic - page 19

    19 Figure 2.1 Figure .2 ...

Manufacturer Wybron Category Work Light

Documents that we receive from a manufacturer of a Wybron Transition Optic can be divided into several groups. They are, among others:
- Wybron technical drawings
- Transition Optic manuals
- Wybron product data sheets
- information booklets
- or energy labels Wybron Transition Optic
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wybron Transition Optic.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wybron Transition Optic, service manual, brief instructions and user manuals Wybron Transition Optic. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wybron Transition Optic.

Similar manuals

A complete manual for the device Wybron Transition Optic, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wybron Transition Optic by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wybron Transition Optic.

A complete Wybron manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wybron Transition Optic - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wybron Transition Optic, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wybron Transition Optic, that we can find in the current document
3. Tips how to use the basic functions of the device Wybron Transition Optic - which should help us in our first steps of using Wybron Transition Optic
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wybron Transition Optic
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wybron Transition Optic in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wybron Transition Optic?

Use the form below

If you did not solve your problem by using a manual Wybron Transition Optic, ask a question using the form below. If a user had a similar problem with Wybron Transition Optic it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)