English dropdown-ico

Manual PAC SWI-PS

8 pages 0.99 mb
Download

Go to site of 8

Summary
  • PAC SWI-PS - page 1

    1 06-14-07 SWI-PS Universal Steering Wheel Control Interface Before Y ou Start A. Is this product compatible with the vehicle? • See application guide (seperate sheet) for listing of vehicles and connection information. If not, check www .pac- audio.com for an updated list of compatible vehicles. B. Prepare for the installation. • If possible, ...

  • PAC SWI-PS - page 2

    2 Wiring Connections Step 1. Connect the BLACK wire to ground (-). V erication: Wire or location registers a constant (-) when probed. Step 2. Connect the RED wire to switched +12V . V erication: Wire reg- isters +12V when the ignition key is turned to the ACC or ON posi- tions. Step 3. Connect the appropriate interface wire (WHITE, YELLOW , ...

  • PAC SWI-PS - page 3

    3 06-14-07 SWI-PS SWI-PS Programming the SWI-PS to Work With the V ehicle Step 6. Press and hold programming/ mode button on SWI-PS. T urn the vehicle ignition to the ON position. The LED on the SWI-PS will light. Step 7. Release the programming/ mode button. The LED will turn off, indicating memory is cleared. Step 8. Press and release the program ...

  • PAC SWI-PS - page 4

    4 Step 18. Press and hold program- ming/mode button on SWI-PS. LED will light. Step 19. Release programming/ mode button. SWI-PS SWI-PS SWI-PS Y ou only need to press the programming/mode button once to program all the buttons. If you press this button again after the interface is programmed, it will erase all previous learned buttons. SWI-PS SWI-P ...

  • PAC SWI-PS - page 5

    5 06-14-07 SWI-PS SWI-PS Programming the SWI-PS to Control the Head Unit (cont.) Step 22. Release the button. The LED will turn on back on. Skip to Step 24. Step 24. If you need to program more buttons, repeat step 20 for each additional audio function on the steering wheel. Once programming is completed, wait 7 seconds. The LED will ash three t ...

  • PAC SWI-PS - page 6

    6 T esting the SWI-PS Note: For Sony head units, please refer to the note below . T est each Heater function of the steering wheel controls. The TEMP and F AN should work properly . When testing the audio controls, the left LED on the SWI-PS will ash indicating it is sending a command. If any function does not work, repeat the programming instru ...

  • PAC SWI-PS - page 7

    7 06-14-07 Appendix A: Known Incompatible V ehicles Vehicle Make(s) Year(s) Model(s) BMW All All with factory-activated cellular phones All with 5-volt SWC data wire at the steering column 2002-2003 5-Series w/navigation Mercedes-Benz All All vehicles Toyota All-2003 Sienna Volkswagen 2002-up All vehicles Steering Wheel Interface Connect SWI white ...

  • PAC SWI-PS - page 8

    8 T roubleshooting Guide Working on a new or unlisted vehicle? We are always looking for new vehicle information. If you’ve successfully completed the installation on a vehicle with steering wheel controls, and the vehicle is not listed in these instructions or on our Website, contact us at techsupport@pac-audio.com so that we may add the informa ...

Manufacturer PAC Category Automobile Parts

Documents that we receive from a manufacturer of a PAC SWI-PS can be divided into several groups. They are, among others:
- PAC technical drawings
- SWI-PS manuals
- PAC product data sheets
- information booklets
- or energy labels PAC SWI-PS
All of them are important, but the most important information from the point of view of use of the device are in the user manual PAC SWI-PS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals PAC SWI-PS, service manual, brief instructions and user manuals PAC SWI-PS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product PAC SWI-PS.

Similar manuals

A complete manual for the device PAC SWI-PS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use PAC SWI-PS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of PAC SWI-PS.

A complete PAC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual PAC SWI-PS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the PAC SWI-PS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the PAC SWI-PS, that we can find in the current document
3. Tips how to use the basic functions of the device PAC SWI-PS - which should help us in our first steps of using PAC SWI-PS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with PAC SWI-PS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of PAC SWI-PS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning PAC SWI-PS?

Use the form below

If you did not solve your problem by using a manual PAC SWI-PS, ask a question using the form below. If a user had a similar problem with PAC SWI-PS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)