-
Smeg TLS12 - page 1
CONTENTS BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE BEFORE THE FIRST WASH CYCLE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES CLEANING THE FILTER/ DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE TRANSPORT AND HANDLING INSTALLATION ELECTRICA ...
-
Smeg TLS12 - page 2
GB TLS 12 5019 612 10134 Programme Care Labels Max. Load kg T ype of wash / Notes - for temperature selection, respect the manufacturer's recommendations on the care label Detergents and Additives Special options Max. Spin Speed rpm Pre- wash Main W ash Softener Start delay Avvio ritardato Eco Eco Pre- wash Pre- lavaggio Easy ironing Stiro fac ...
-
Smeg TLS12 - page 3
5019 612 10134 Programme T emperature (°C) Load (kg) W ater (l) Energy (kWh) Approx. Programme Duration*** (hours : minutes) White Cotton 95 5.0 49* 1.70 1:55 Cotton 60 5.0 42 0.95 2:10 Cotton + Eco** 60 5.0 42 0.85 2:20 Cotton 40 5.0 49 0.55 2:00 Synthetics 60 2.5 53* 0.85 1:30 Synthetics 40 2.5 47 0.50 1:15 Delicates 40 1.5 51 0.50 0:45 Daily lo ...
-
Smeg TLS12 - page 4
GB 2 BEFORE USING THE WASHING MACHINE 1. Remove the packaging and check a. Cut and remove the shrink-wrap. b. Remo ve the top protection and the protective corners. c. Remove the bottom protection by tilting and turning the wash ing machine on one rear bottom corner. Make sure that the black plastic part of the bottom protection (if available on th ...
-
Smeg TLS12 - page 5
GB 3 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing • The packaging materials ar e 100% recyclable and bear the recycling symbol . Adhere to lo cal regulations when disposing of packaging material. 2. Disposing of packaging and old washing machines • This appliance is mar ked according to the European directive 20 02/96/EC on Waste Electric ...
-
Smeg TLS12 - page 6
GB 4 DESCRIPTION OF THE WASHING MACHINE BEFORE THE FIRST WASH CYCLE 1. Lid 2. Detergent dispenser 3. Drum 4. Pump access behind filter 5. After-Sales Service sticker (behind the filter cover) 6. Mobility lever (depending on model) • To move the washing machine: pull the handle out a little bit by hand and pull it out to the stop with the foot. 7. ...
-
Smeg TLS12 - page 7
GB 5 PREPARATION OF THE WASHING Sort the laundry 1. Sort the laundry according to… • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics , wool, handwash items. • Colour Separate whites and coloureds. Wash new coloured items separately. •S i z e Wash items of different sizes in the same load to improve washing eff ...
-
Smeg TLS12 - page 8
GB 6 Loading the laundry 1. Open the machine lid by pulling it upwards. 2. Open the drum by pressing the push button (pictures “ 1a ” or “ 1b ” - depending on model). 3. Place the items of laundry in to the drum one by one. Do not exceed the maximum load of the programmes indicated in the separate programme chart. Notes: - Overloading the m ...
-
Smeg TLS12 - page 9
GB 7 DETERGENTS AND ADDITIVES Choice of the right detergents and additives The type of detergent depends on: • type of fabric (cottons , easy care/synthetics, delicate items, wool). Note: use only specific detergents for wool. • colour; • washing temperature; • degree and type of soiling. Notes: • Do not use liquid detergents when acti va ...
-
Smeg TLS12 - page 10
GB 8 Using chlorine bleach • Wash your laundry in the des ired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bl each to the SOFTENER chamber (close the lid carefully). • Immediately after end of programme, start the “Rinse and Spin” progra mme to eliminate any residual bleach smell; if you want, you can add soften ...
-
Smeg TLS12 - page 11
GB 9 CLEANING THE FILTER/ DRAINING RESIDUAL WATER The washing machine is provided with a self-cleaning pump. The filter keeps objects like buttons, coins, safety- pins etc. which have b een left in the laundry. We recommend to check and clea n the filter regularly, at least two or thr ee times a year. Especially: • if the appliance is not drainin ...
-
Smeg TLS12 - page 12
GB 10 CARE AND MAINTENANCE Detergent dispenser Clean the detergent dispenser re gularly, at least three or four times a year, to prevent detergent build-up: 1. Push in the buttons on each side of the dispen ser. 2. Pull the dispenser towa rds you and remove it. A small quantity of water can re main in the dispenser. It is advisable to carry the dis ...
-
Smeg TLS12 - page 13
GB 11 Appliance exterior and control panel • Clean with a so ft damp cloth. • If necessary, a neutral household cleaner can be applied (do not use aggressi ve or abrasive products). Appliance interior • After each washing, leave the lid open for some time to allow the insi de of the appliance to dry. • If you never or seldom wash your laund ...
-
Smeg TLS12 - page 14
GB 12 TROUBLESHOOTING GUIDE Your washing machine is equipped wi th automatic safety functions which detect and diagno se faults at an early stage and allow you to react appropriately. Thes e faults are frequently so minor that they can be removed within a few minutes. Problem Causes, Solutions, Tips Appliance does not start, no indicator lamps are ...
-
Smeg TLS12 - page 15
GB 13 Description of red indications Red indication lamp lights up Indication on display (if fitted on your machine) Description Causes Solutions “Water tap closed” Appliance has no or insu fficient water supply. The “Start/Pause” light flashes. Check whether: • Water tap is fully open and water supply pressure is sufficient. • Kinks ar ...
-
Smeg TLS12 - page 16
GB 14 If your washing machine has no time display, ch eck which of the pr eviously described situations could be the origin of the faul t and follow the corresponding instructions. Red indication lamp lights up Indication on time display (if fitted on your machine) Description Causes Solutions “Service” “bdd” (in case your washing machine h ...
-
Smeg TLS12 - page 17
GB 15 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the pr oblem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service. Specify: • The nature of the problem. • The exact model ...
-
Smeg TLS12 - page 18
GB 16 INSTALLATION Removal of transport bracket The washing machine is fitted with a transport bracket to avoid any possible dama ge during transport. IMPORTANT: Before using the washing machine, the transport bracket at the back MUST be removed. 1. Unscrew the two screws “ A ” and the four screws “ B ” with a flat screwdriver or a No. 8 he ...
-
Smeg TLS12 - page 19
GB 17 Adjust the feet Install the washing machine on a level surface, near to electrical, water an d drain connections. If the floor is uneven, adjust the feet (do not insert pieces of wood, cardboard etc. under the feet): 1. Loosen the locknut usin g the wrench provided. 2. Adjust the height of the feet by hand. 3. Retighten the locknut by tu rnin ...
-
Smeg TLS12 - page 20
GB 18 Water stop anti-flooding system (see inlet hose type as shown on the right - depending on model) • Screw the hose to the water su pply tap. Turn the tap fully on and check the water-ti ghtness of the connection. • The washing machine must not be connected to the mixing tap of a non-pressurized water heater! • The inlet hose and the pl a ...
-
Smeg TLS12 - page 21
GB 19 ELECTRICAL CONNECTION Do not use extension le ads or multi sockets. Electrical connections must be made in accordance with local regulations. 1) Warning - this washing machine must be earthed This washing machine is normally supplied wi th a main s lead having a plug fitted in the factory which has been checked for corr ect earth continuity. ...
Do you have a question concerning Smeg TLS12?
Use the form below
If you did not solve your problem by using a manual Smeg TLS12, ask a question using the form below. If a user had a similar problem with Smeg TLS12 it is likely that he will want to share the way to solve it.