-
Fujitsu BS2OSD - page 1
Fujitsu Siemens Computers BS2OSD(BS2000/OSD) *2 Version 6.0B *7 April 2008 Release Notice Copyright (C) Fujitsu Siemens Computers GmbH 2008 All rights reserved ...
-
Fujitsu BS2OSD - page 2
Page 1 *2 Release Notice BS2OSD V6.0B 1 General 3 1.1 Ordering 4 1.2 Delivery 4 1.3 Documentation 7 2 Software extensions 10 2.1 Adaptations to CFCS 4.3 10 2.2 Enhancement of multiprocessor perfor mance via AS/RM lock breakup 10 2.3 Data spac es 10 2.4 Performance enhancement of CCOPY in conjunction with HSMS V7.0A and ARCHIVE V7.0B 10 2.5 Function ...
-
Fujitsu BS2OSD - page 3
Page 2 3.4 Product use 34 3.5 Obsolete functions (and those to be discontinued ) 39 3.5.1 Obsolete macros 39 3.5.2 Obsolete commands 39 3.6 Incompatibilities to BS2000/OSD-BC V5.0C 39 3.7 Restrictions 40 3.8 Procedure in the event of errors 40 4 Hardware support 43 4.1 Central units 43 4.1.1 changed sup port 43 4.1.2 Discontinued support 44 4.1.3 E ...
-
Fujitsu BS2OSD - page 4
Page 3 1 General This Release Notice is a summary of the major extensions, de- pendencies and operating information with respect to the deliv- ery components of the BS2000/OSD-BC V6.0 *) package that are con- tained in the following technical delivery units: 'BS2GA.APACHE V6.0', 'BS2GA.BS2OSD V6.0', 'BS2GA.CRTE-BAS V6.0&apo ...
-
Fujitsu BS2OSD - page 5
Page 4 *7 SYSFGM.PERL.058.E SYSFGM.PLAM.034.e SYSFGM.POSIX-BC.060.E SYSFGM.PTHREADS.010.E SYSFGM.SDF.046.E *1 SYSFGM.SIR.150.E SYSFGM.SNMP-LIGHT.050.E *1 SYSFGM.SNRTP.010.E SYSFGM.SPCONV.011.E *5 SYSFGM.SPOOL.048.E SYSFGM.STRT.150.E *7 SYSFGM.TOMCAT.055.D *5 SYSFGM.WEBTRANS-OSD.071.E *5 The Release Notice SYSFGM.BS2XC.022.E must also be noted for S ...
-
Fujitsu BS2OSD - page 6
Page 5 *2 BS2CP 15.0B *2 BS2000-EXEC 15.0B BUILDER 1.0A C-TPR-LZS 2.3A CALENDAR 15.0A CALENDAR-TU 15.0A CAPRI 1.5A *2 CCOPY 5.0B *2 COSMOS-BC 15.0B CPR 15.0A DAMP 4.4A Utility program DCADITO 15.0A Utility program DIV 15.0A DIVTRAC 15.0A DLMUSER 14.0C DPAGE 15.0A Utility program DWS 11.0A *2 ELFE 15.0B Utility program ESS-DOORS 12.1A FASTPAM 15.0A ...
-
Fujitsu BS2OSD - page 7
Page 6 *2 SMPGEN-S 15.0B Utility program *2 SMPGEN-U 15.0B *2 SPCCNTRL 15.0B Utility program *5 STATUS 15.1B *2 SRPMNUC 15.0B *5 SYSFILE 15.0C TANGBAS 1.3A TANGRAM 1.3A TPCOMP2 15.0A Utility program TPRLAM 15.0A TSOSLNK 21.0E Utility program TULAM 15.0A UTM-SM2 15.0A *2 VOLIN 15.0B Utility program WARTOPT 15.0B BS2GA.CRTE-BAS *4 CRTE-BAS 1.6A *4 CR ...
-
Fujitsu BS2OSD - page 8
Page 7 BS2GA.SDF DISPLAY 1.0B FHS-TPR 8.2D SDF 4.6A SDF-CONV 3.0B SDF-I 4.1A *5 SDF-P-BASYS 2.4A SDF-PAR 1.1A SDF-SFC 3.1A SDF-SRV 3.0C SDF-U 4.1F VAS 2.3B BS2GA.SIR *2 SIR 15.0B BS2GA.SNMP SNMP-LIGHT 5.0A BS2GA.SPOOL *7 BS2ZIP 1.2A PRMMAN 1.3A PRMPRES 1.2A SNRTP 1.0B SPCONV 1.1A *5 SPOOL 4.8A SPOOLSYS 2.2A SPSERVE 2.8A SPSRVMAN 2.3A BS2GA.STRT *2 ...
-
Fujitsu BS2OSD - page 9
Page 8 The documentation for the remaining technical delivery units is listed in the respective Release Notices. Core documentation TITLE ORDER NUMBER GERMAN ENGLISH ADAM U 3563-J-Z125-5 -5-76 * BINDER U 9557-J-Z125-4 -4-76 Binder Loader-Starter (BLSSERV) U 5137-J-Z125-6 -6-76 CALENDAR U23372-J-Z125-1 -1-76 * Files and Volumes larger than 32GB U412 ...
-
Fujitsu BS2OSD - page 10
Page 9 The documentation is available as online manuals under http://manuals.fujitsu-siemens.com or can be ordered in printed form at extra cost under http://fsc-manualshop.com The product Adobe Acrobat Reader is required to read or print the manuals in PDF format. The Release Notices are also available online under http://manuals.fujitsu-siemens.c ...
-
Fujitsu BS2OSD - page 11
Page 10 2 Software extensions Only the main extensions and enhancements over the previous ver- sion BS2000/OSD-BC V5.0 are described in the following sections. 2.1 Adaptations to CFCS 4.3 The progress reporting in CFCS 4.3 for different requirements has been implemented in BS2000/OSD V6.0. 2.2 Enhancement of multiprocessor performance via AS/RM loc ...
-
Fujitsu BS2OSD - page 12
Page 11 2.5 Functional extensions for SM pubsets The new SMPGEN MODIFY-SYSTEM-MANAGED-PUBSET statement can be used to extend existing system managed pubsets by single feature pub- sets, where each single feature pubset is turned into a volume set of the system managed pubset. The user data and the management and protection information of the new si ...
-
Fujitsu BS2OSD - page 13
Page 12 2.8 Reorganizing open files Previously, it was only possible to reorganize closed files in pubsets or volumes with SPACEOPT. As of SPACEOPT V3.0, open files can also be included when reor- ganizing pubsets and reducing file extents. Please consult the Release Notice SYSFGM.SPACEOPT.030.E for the complete scope of the innovations. 2.9 Tape b ...
-
Fujitsu BS2OSD - page 14
Page 13 The files are encrypted in pages with the symmetrical DES or AES encryption method. The encryption method can be selected via the FILECRYPT system parameter and can be changed dynamically. AES is used by default. The FREFCRYP system parameter can be used to limit the number of crypto passwords by only allowing new crypto passwords to be as- ...
-
Fujitsu BS2OSD - page 15
Page 14 2.12 Four character mnemonic name for tape devices A four character hexadecimal device mnemonic (1000 – FFFF) is now also allowed for tape devices. A two character alphanumeric name is still allowed as previously for all device types. This makes more than 1300 tape devices addressable. Note: As of SINIX-2000-Z V8.1A K818.4, the SKP-X base ...
-
Fujitsu BS2OSD - page 16
Page 15 *2 For SF and SM Pubsets, the maximum catalog file size will be *2 increased to 32008 4K blocks, representing a 98% enlargement. *2 In the case of SM Pubsets, the special catalogs #MIN, #JVC *2 and #PTV can also be shared out among upto 100 catalog files, *2 which corresponds to a new maximum catalog size of 32008 4K *2 blocks and a 187-fol ...
-
Fujitsu BS2OSD - page 17
Page 16 2.14.2 Self-configuring NK-ISAM Pools in Data Spaces *2 To further relieve the system address area, NK-ISAM files are *2 buffered in Data Spaces. At the same time, buffer areas are *2 created strictly for individual files and no longer for file *2 groups, thus reducing the number of lock conflicts over access *2 to the buffer areas. The buf ...
-
Fujitsu BS2OSD - page 18
Page 17 2.15 New functions of BS2000/OSD V6.0B with Correction Package 1/2006 2.15.1 JENV V5.0 *3 BS2000/OSD with the JENV V5.0 component has been certified as *3 JAVA COMPATIBLE by Sun Microsystems, Inc. This provides the *3 assurance that Java programs can run on BS2000/OSD without re- *3 compilation or other modifications. *3 The current version ...
-
Fujitsu BS2OSD - page 19
Page 18 2.16 New functions in BS2000/OSD V6.0B with Correction Package 2/2006 2.16.1 Autonomous, dynamic control of I/O resources (IORM) *4 The new utility program IORM facilitates autonomous, dynamic *4 control of the I/O resources, devices, controllers, channels *4 (type S and type FC) and paths. Both S and SX servers are *4 supported in native a ...
-
Fujitsu BS2OSD - page 20
Page 19 *4 Dynamic I/O load distribution for disks on the FC channel of *4 the S server (DPAV) *4 Only one I/O can be executed at any particular time on a disk. *4 If several applications with a large number of I/Os use the same *4 disk, this can lead to high wait times. *4 Until now, static PAV (Parallel Access Volume) has been used on *4 S server ...
-
Fujitsu BS2OSD - page 21
Page 20 *4 Limiting the I/O inclusion of single VM2000 guest systems (IOLVM) *4 Less important guest systems that have intensive I/O activity, *4 can severely impede other, much more important guest systems *4 that use the same I/O resources. *4 The IORM function can detect such conflict situations and *4 intervene predictively. To do this, IORM co ...
-
Fujitsu BS2OSD - page 22
Page 21 *4 data. As of BS2000/OSD-BC V6.0, a new system behavior will *4 therefore be introduced with which the default value of the CCS *4 name of a file is determined. *4 Note: *4 ISO8859-x variants should not be used as a system or user *4 character set since all programs in BS2000 assume that the *4 data is provided with a so-called invariant E ...
-
Fujitsu BS2OSD - page 23
Page 22 2.17 New functions in BS2000/OSD V6.0B with Correction Package 1/2007 2.17.1 Support for Unicode in BS2000/OSD via XHCS-SYS *5 Due to new EU directives, the previously supported character sets *5 are no longer sufficient in the medium term. As of BS2000/OSD-BC *5 V6.0B (correction level B62), support for Unicode supplements the *5 EBCDIC ch ...
-
Fujitsu BS2OSD - page 24
Page 23 *5 The UTF codes (Unicode Transformation Format) UTF-8, UTF-16 (2 *5 Byte) and UTF-E that follows UTF-EBCDIC from IBM are supported in *5 BS2000/OSD. 2.17.2 Support for Unicode by the software products *5 The software environment required for supporting the Unicode *5 functionality is provided in BS2000/OSD-BC V6.0 and V7.0. *5 The support ...
-
Fujitsu BS2OSD - page 25
Page 24 2.17.3 Improved SAN support (SANCHECK function) *5 Since the introduction of the fibre channel, the FC connection *5 technology SAN (Storage Area Network) is being used increasingly *5 for connecting Symmetrix storage subsystems and magnetic tape de- *5 vices (CentricStor and LTO). The previous control functions in *5 BS2000/OSD only allow ...
-
Fujitsu BS2OSD - page 26
Page 25 *5 The following tuning parameters can be modified dynamically: *5 FORCEDTERM Forces termination of the subsystem. *5 HDSTNI Number of server tasks for asynchronous I/Os. *5 HDPTNI Maximum number of mounted local file systems. *5 HEAPSZ Maximum possible value for brk() system call. *5 MAXTIMERC Maximum number of seconds for terminating *5 r ...
-
Fujitsu BS2OSD - page 27
Page 26 2.18 New functions in BS2000/OSD V6.0B with Correction Package 2/2007 *6 BS2000/OSD V6.0B correction level B72 does not contain functional *6 extensions in the software products. 2.19 New functions in BS2000/OSD V6.0B with Correction Package 1/2008 2.19.1 Support for new Hardware *7 In 2007, December release was given for the DMX-4 series S ...
-
Fujitsu BS2OSD - page 28
Page 27 2.20 Implemented change requests / extended commands 2.20.1 MOVE-TASK-TO-CATEGORY The system administration can use the new MOVE-TASK-TO-CATEGORY command to change the assignment of a task to a category if, for example, it is necessary to provide better control of this task or relieve the load on a category. The command does not handle task ...
-
Fujitsu BS2OSD - page 29
Page 28 2.20.4 NTP/BS2 TimeServer with highest priority The time server NTP (NETWORK-TIME-PROTOCOL) is the server with the highest priority in BS2000 when the stratum value is less than five or the system parameter NTPSHIGH is set to "Y" (yes) and BS2000 has not received a value from NTP about the supplied time quality (stratum) because i ...
-
Fujitsu BS2OSD - page 30
Page 29 2.20.9 Catalog expansion commands *2 ADD-CATALOG-FILE *2 With this command up to 100 special catalogs can be created for *2 SM Pubsets in the catalog format “extra large” for migrated *2 files, job variables and private disk/volume files. *2 The names of the new catalog files have the form *2 :<catid>:$TSOS.TSOSCAT#xnn, where x re ...
-
Fujitsu BS2OSD - page 31
Page 30 2.20.11 Extended commands for setting CCS defaults *4 CREATE-FILE / CREATE-FILE-GROUP *4 The CODED-CHARACTER-SET operand has been extended by the *4 USER-DEFAULT parameter which is simultaneously also the new *4 default value. *4 If this entry is not EDF03IRV, when a file is created the CCS *4 entry of the ID is taken over into the CCS name ...
-
Fujitsu BS2OSD - page 32
Page 31 3.2 Software configuration The following SOLIS correction levels are required in the source version for BS2000/OSD-BC V6.0: *5 BS2000/OSD-BC V5.0 (as of correction level C71) or *5 BS2000/OSD-BC V4.0 (as of correction level A71) If systems running BS2000/OSD-BC V5.0 or V4.0 are operated in parallel, this correction level must also be used o ...
-
Fujitsu BS2OSD - page 33
Page 32 *2 OMNIS V8.3/V8.4 *2 OMNIS-MENU V3.3/V3.4 *1 openCRYPT V1.2 SERV *5 openFT V8.0/V9.0/V10.0 *5 openNet Server V3.0/V3.1/V3.2 *5 openUTM V5.2/V5.3 *1 PASCAL-XT V2.2 *1 PASSAT V6.2 *1 PLI1 V4.2 *1 PCS V2.7 *5 PERCON V2.8/V2.9 *1 PROP-TPM V3.0 *1 PROP-XT V1.2 *1 RAV V5.0 *1 RFA V15.0 *5 ROBAR V5.0/V6.0 *1 RPG3-XT V4.0 *5 RSO V3.4/V3.5 *1 SBA-B ...
-
Fujitsu BS2OSD - page 34
Page 33 Innovations in IMON V2.8: The new CHECK-UNITS function allows you to check that the system is complete, correct and up to date. For customer-specific installations, all installation parameters can be saved into a standardized parameter file and passed over to IMON for all subsequent installations. All //SHOW statements are extended with the ...
-
Fujitsu BS2OSD - page 35
Page 34 *4 Innovations in IMON V3.0 *4 With IMON V3.0, delivery units that are parked on a key-formatted *4 pubset can be installed on a non-key-formatted pubset. *4 Previously, the statement GENERATE-IDF displayed all delivery *4 units. Only the installed delivery units are now offered in the *4 dialog. *4 As of IMON V3.0, the TASKLIB and MACROLIB ...
-
Fujitsu BS2OSD - page 36
Page 35 For availability reasons, you are strongly advised not to perform an update installation on the active home pubset! Certain hardware requirements must be fulfilled for a first-time installation: the installed hardware configuration must be a su- perset of the minimum configuration, i.e. it must include at least one business server with inpu ...
-
Fujitsu BS2OSD - page 37
Page 36 BCAM memory values: The values for the maximum size of the resident and paging memory for data transfers are calculated by BCAM at startup from the size of the system memory (BS2000 MEMSIZE system value). The relevant RESMEM and PAGMEM parameters should not be generally be specified in the BCAM /DCSTART, /DCOPT and /BCMOD commands, but shou ...
-
Fujitsu BS2OSD - page 38
Page 37 The following class 2 system parameters have been discontinued: - CCPUNORM - DELLOGLN The following class 2 system parameters have been changed: - JTABSMEM Defines the maximum JIT memory on SX servers. The memory is requested as resident and must therefore match the memory available on the machine. As of BS2000/OSD V6.0A, the parameter defa ...
-
Fujitsu BS2OSD - page 39
Page 38 New commands: The percentage of main memory used for big pages can be changed with the new command MODIFY-MEMORY-PARAMETERS. The command SHOW- MEMORY-CONFIGURATION displays the current configuration of main memory, including the use of big pages. *1 The two new parameters/commands are only available on SX150 *1 servers. They are ignored on ...
-
Fujitsu BS2OSD - page 40
Page 39 3.5 Obsolete functions (and those to be discontinued) The following functions are no longer supported as of this ver- sion: - Paging on global memory - The utility program UGEN is no longer supplied. The internal name of the standard EXEC or the SYSSIZE is modified with the procedure SYSPRC.BS2000-EXEC.150. *5 - Software product CRHP2AFP *5 ...
-
Fujitsu BS2OSD - page 41
Page 40 3.7 Restrictions - Processing encrypted files Encrypted files cannot be accessed in BS2000/OSD < V6.0, they can only be displayed and deleted. However, in an SPVS network a slave access from within BS2000/OSD V6.0 is possible even if BS2000/OSD < V6.0 is running on the mas- ter system. - Tape backups with blocks > 32 KB In BS2000/O ...
-
Fujitsu BS2OSD - page 42
Page 41 Document types The following documents will be needed, depending on the situa- tion: - SLED (following a system crash) - SNAPFILE - SYSTEMDUMP (following a system dump message) - SYSOUT/SYSLST logs - STARTUP parameter files - USERDUMP - Diagnose-Dump (IDIAS call: CREATE-SYSTEM-DUMP <tsn>) - SERSLOG file - CONSLOG file - SYSTEMREPFILE ...
-
Fujitsu BS2OSD - page 43
Page 42 For BCAM problems: - activate all DCM traces with /DCDIAG DCM.,MODE=SAVE and after reproducing the error, save the generated trace files S.DCTRAC.* with /DCDIAG DCM.,MODE=CLOSE or submit the diagnostic information to main memory with /DCDIAG DCM.,MODE=HOLD and evaluate it with ASTRID. For problems at the hardware and software interface: - H ...
-
Fujitsu BS2OSD - page 44
Page 43 4 Hardware support 4.1 Central units 4.1.1 changed support The following business servers are supported in BS2000/OSD-BC V6.0. A prerequisite for using BS2000/OSD V6.0 on SX servers is *2 the hardware abstraction layer X2000 V3.0 based on Solaris V8 as the base system. Business Server S110 Business Server S115 Business Server S120 Business ...
-
Fujitsu BS2OSD - page 45
Page 44 4.1.2 Discontinued support - none - 4.1.3 Extended support - none - 4.2 Channels 4.2.1 Changed support FC connections are supported by the following business servers with F-CON capability via the FC channel: *5 S120, S140, S145, S155, S165, S170, S180, S190 and S200 (the IPL of FC is not possible on S120) *5 See the separate Release Notice ...
-
Fujitsu BS2OSD - page 46
Page 45 *5 See the separate Release Notice SYSFGM.BS2XC.022.E for SX series business servers. 4.4 Disk controllers 4.4.1 Changed support No changes have been made to the support for disk controllers with respect to BS2000/OSD V5.0C. The following models of the Symmetrix controllers from EMC2 are supported in BS2000/OSD-BC V6.0: 5330, 5430, 5630, 57 ...
-
Fujitsu BS2OSD - page 47
Page 46 4.5.2 Discontinued support The following is no longer supported in BS2000/OSD-BC V6.0: - the magnetic tape device 3505 via SPCC 4.6 Printers 4.6.1 Changed support The following printers are supported in BS2000/OSD-BC V6.0: - the fast- / tape printers 3348-120x, 3349-120x - the laser printers 3351-23, 3351-231 3353-23, 3353-231 2050-2x, 2050 ...
Do you have a question concerning Fujitsu BS2OSD?
Use the form below
If you did not solve your problem by using a manual Fujitsu BS2OSD, ask a question using the form below. If a user had a similar problem with Fujitsu BS2OSD it is likely that he will want to share the way to solve it.