English dropdown-ico

Manual Perle Systems S-1110PP

29 pages 0.24 mb
Download

Go to site of 29

Summary
  • Perle Systems S-1110PP - page 1

    P/N 5500317-11 Perle PoE/PoE+ 10/100/1000 E thernet Media Con verters Inst allation Guide S-1110P S-1110PP S-1110DP S-1110DPP ...

  • Perle Systems S-1110PP - page 2

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 2 Over vie w This docum ent contains instruc tions neces sary for the installat ion and operatio n of the Per le Standa lone PoE/Po E+ 10/1 00/1000 rate convert ing Media C onverters (S-1110P). T hese pr oducts have the abilit y to convert 10/ 100/1000Bas e-T cable connec tions ...

  • Perle Systems S-1110PP - page 3

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 3 PoE (P) PoE+ (PP) Connector (xx) Mode Distance Wavelength (TX/RX) S-1110 P -S1SC80U S-1110 PP -S1SC80U SC SM 80 km/50 mi. 1510/1590 nm S-1110 P- S1SC80D S-1110 PP- S1SC80D SC SM 80 km/50 mi. 1590/1510 nm S-1110 P -S2 xx 120 S-1110 PP -S2 xx 120 SC/ST SM 120 km/74.6 mi. 1550 n ...

  • Perle Systems S-1110PP - page 4

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 4 Dual Copper / PoE (DP) Dual Copper / PoE+ (DP P) Connector (xx) Mode Distance Wavelength (TX/RX) S-1110 DP -S1SC80D S-1110 DPP -S1SC80D SC SM 80 km/50 mi. 1590/1510 nm S-1110 DP -S2 xx 120 S-1110 DPP -S2 xx 120 SC/ST SM 120 km/74.6 mi. 1550 nm S-1110D DP -S1SC120U S-1110D DPP ...

  • Perle Systems S-1110PP - page 5

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 5 Inst allation The default DI P switch s ettings ( all switch es in the UP position) will work f or mos t installations . These are the s teps req uired to co nfigure the Perle S- 1110P Ethernet m edia conver ter: 1. Insert SFP M odule (SF P Mode l onl y ). 2. Set the Auto- MD ...

  • Perle Systems S-1110PP - page 6

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 6 Powe r Sourcing P inout s Note: T he factor y settings for Po wer Sourc ing Pinouts will work for most installat ions as 80 2.3a and 80 2at-2009 ( POE/P OE+) devices will det ect and s ync to the correc t POE optio n. Ho wever, in the rare case that you need to modif y the se ...

  • Perle Systems S-1110PP - page 7

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 7 Powe ring Options Ju mper Se ttings In order to se lect a po wering optio n, the Po wer Option s Jum per settings m ust be set. Each c opper port has a set of P ower O ption jumpers . To acc ess the Power ing Options J umper settings, unscrew the s ix side s crews on th e cas ...

  • Perle Systems S-1110PP - page 8

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 8 DIP Switches The DIP s witches are access ible through the o pening i n the side of the enc losure . Bank 1 Ban k 2 Bank 1 Bank 2 Note: All switch cha nges tak e effect imm ediately. Sw itch chang es will cycle p ower to the PD onl y if the PD Res et switch is set to O n or y ...

  • Perle Systems S-1110PP - page 9

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 9 DIP Switch Setti ngs Bank 1 Auto Negotiation copp er (S witch 1) Switch Posit ion Copp er 1 Copper 2 Up (defau lt) Auto Auto Down Off Auto Note: Auto ne gotiation should on ly be turne d off, if the copper link partner does n ot support Auto N egotiation an d fixed s ettings ...

  • Perle Systems S-1110PP - page 10

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 10 of link on e ither the fib er or c opper port can occur with out affec ting the other con nection. Smart Link P ass-Th rough In this mode, the link s tate on one connection is directl y reflected t hrough th e media con verter to t he other connect ion. If link is lost on on ...

  • Perle Systems S-1110PP - page 11

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 11 Illustration of the FFA The f ollowing diagram is an illustrat ion of the operation of this feature. (A) – Rem ote Media Con verter s etup for Fiber Fault Al ert Enabled, Fiber Negot iation – OFF a nd Link Mode – St andard. (B) – Loca l Media Conv erter s etup for Fi ...

  • Perle Systems S-1110PP - page 12

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 12 Speed copper (Switch 5) Switch Posit ion Copp er port 1 Copper port 2 Up (defau lt) 100 NA Down 10 NA Note W hen Auto Negot iation (SW 1) is set to Off, the m edia converter will use this s witch setti ng for copp er port 1 s peed. 100: W hen Switch 5 is in the Up position, ...

  • Perle Systems S-1110PP - page 13

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 13 Full Duplex: The Media Converter M odule will be set to F ull Duplex m ode on its f iber link . Half Duplex: The Media Converter M odule will be set to Half Duplex m ode on its f iber link . Loopback Fiber-1 (Switch 7) Loopback Fiber-2 (Switch 8) Switch Posit ion Mo de Up (d ...

  • Perle Systems S-1110PP - page 14

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 14 Down Down PSE disabled These s witches m ust be set in order to enab le the po wer sourc ing function and t o indicate t he t ype of device det ection req uired. If the device t ype is unk nown, the defau lt should be used as per IEEE802.3af /at standards . Enabled : W hen e ...

  • Perle Systems S-1110PP - page 15

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 15 Fiber Redundancy (Switch 7) Dual fiber models on ly Switch Posit ion Mo de Up (defau lt) Disabled Down Enabled Disabled : W hen this feature is disab led, both f iber por ts will operate as ind epende nt ports on a s witch. Nor m al switch rules and functions will appl y. En ...

  • Perle Systems S-1110PP - page 16

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 16 Inst alling the SFP Fiber Mod ule SFP models o nly. 1. Locate the appr opriate f iber m odule and ins ert the SFP into the opening on the f ront of the m edia convert er. 2. Ensure the SFP modul e is properl y seated. T he releas e latch of the SPF f iber transc eiver m ust ...

  • Perle Systems S-1110PP - page 17

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 17 Inst alling the Copper Cable 1. Locate 10/100/ 1000Bas e-T com pliant copper c ables w ith the appropriate c onnectors . 2. Connect the RJ-45 cab le bet ween the Perle m edia converter and the de vice. Note : T he Perle m edia converter su pports Auto- MDIX which allows conn ...

  • Perle Systems S-1110PP - page 18

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 18 2. Attach the gr ounding lug to the chass is and sec ure with the grounding sc rew(s). Attaching the Power cord strain relief clip 1. Feed the po wer cord thr ough the o pening in th e powe r cord relief clip. 2. Attach the po wer cord r elief clip to t he chassis a nd sec u ...

  • Perle Systems S-1110PP - page 19

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 19 Operation Status LED The Perle Po E/PoE+10/ 100/10 00 Rate co nverting M edia converters have status LEDs located on th e front pa nel of th e unit. PWR On – Power is applie d to the unit Blinking (slo w) – Loopback mode (one or both fi ber interfaces are in loopback mod ...

  • Perle Systems S-1110PP - page 20

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 20 SPD-(Copper Port 1 /2) Green – 1000 Mbps Orange – 100 Mbps Off – 10 Mbps (i f link is currently established) FDC-1/2 (Duplex o n Copper 1/2) On – Full Duplex Mode Off – Half Duple x Mode LKC-1/2 (Link Sta tus on Copper port 1/2) On – Coppe r link is present Off ? ...

  • Perle Systems S-1110PP - page 21

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 21 Other Fea tures Auto-MDIX Auto-MDIX ( autom atic medium -dependent interfac e crossover) detects the s ignalling on the 10/ 100/1000 BASE-T inter face to determ ine the t ype of cable connecte d (straig ht-throug h or crossover) and autom atically conf igures the c onnectio ...

  • Perle Systems S-1110PP - page 22

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 22 T roublesh ooting General 1. Ensure power is supplied t o the m edia converter. O nly the Perle provided power s upply m ay be used. 2. Ensure the rem ote device’s fiber c onnection t ype is compatible with the m edia c onverter. If us ing a sim plex fiber connect ion, ens ...

  • Perle Systems S-1110PP - page 23

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 23 converter. At the rem ote medi a converter, the data will be looped back and pas sed throu gh the fiber, back to the local conv erter and passed to the copper l ink. No Power to the PD 1. Ensure that the PD is com patible with th e S-1110 P. If the PD is a PO E+ device, a PO ...

  • Perle Systems S-1110PP - page 24

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 24 T echnical Speci fications The f ollowing applies to all S-111 0P m edia converters : Power Input / Consumption: 46V DC to 57V DC @ 6 W Operating Temperature: 0° C to 50° C (32° F to 122 ° F) Storage Temperature: -25° C to 70° C (-13° F to 158° F) Operating Humidity ...

  • Perle Systems S-1110PP - page 25

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 25 PoE (P) PoE+ (PP) Mode Wavelength (nm) TX Power (dB) RX Power (dB) Budget S-1110 P -S1SC10U S-1110 PP -S1SC10U SM TX: 1310 RX: 1490 Min: -9 Max: -3 Min: -20 Max: -3 11 S-1110 P -S1SC10D S-1110 PP -S1SC10D SM TX: 1490 RX: 1310 Min: -9 Max: 3 Min: -20 Max: -3 11 S-1110 P -S1SC ...

  • Perle Systems S-1110PP - page 26

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 26 3 Port Models Dual Copper / PoE (DP) Dual Copper / PoE+ (DPP) Mode Wavelength (nm) T X Power (dB) RX Power (dB) Budget (dB) S-1110 DP -M2xx05 S-1110 DPP -M2xx05 MM TX: 850 RX: 850 Min: -9.5 Max: -4 Min: -17 Max: -3 7.5 S-1110 DP -S2xx10 S-1110 DPP -S2xx10 SM TX: 1310 RX:1310 ...

  • Perle Systems S-1110PP - page 27

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 27 Dual Copper / PoE (DP) Dual Copper / PoE+ (DPP) Mode Wavelength (nm) T X Power (dB) RX Power (dB) Budget (dB) S-1110 DP -S2xx120 S-1110 DPP -S2xx120 SM TX: 1550 RX:1550 Min: 0 Max: 5 Min: -32 Max: -9 32 S-1110 DP -S1SC120U S-1110 DPP -S1SC120U SM TX: 1590 RX:1510 Min: -3 Max ...

  • Perle Systems S-1110PP - page 28

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 28 Complian ce Infor mation FCC This product has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection again st harmful interference when the equipment is operated in a ...

  • Perle Systems S-1110PP - page 29

    Perle PoE/PoE + 10/100/1000 Ethernet Media Converter Installation Guide 29 Warranty / Registration Perle’s stan dard Lifetim e Warr anty provides custom ers with return to factor y repairs for Perl e products that fail under the conditions of the warrant y coverag e. Details ca n be f ound at: http://www .perle.com/sup port _services/w arrant y.s ...

Manufacturer Perle Systems Category Network Card

Documents that we receive from a manufacturer of a Perle Systems S-1110PP can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- S-1110PP manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems S-1110PP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems S-1110PP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems S-1110PP, service manual, brief instructions and user manuals Perle Systems S-1110PP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems S-1110PP.

Similar manuals

A complete manual for the device Perle Systems S-1110PP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems S-1110PP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems S-1110PP.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems S-1110PP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems S-1110PP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems S-1110PP, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems S-1110PP - which should help us in our first steps of using Perle Systems S-1110PP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems S-1110PP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems S-1110PP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems S-1110PP?

Use the form below

If you did not solve your problem by using a manual Perle Systems S-1110PP, ask a question using the form below. If a user had a similar problem with Perle Systems S-1110PP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)