English dropdown-ico

Manual Furuno 1823C-BB

92 pages 4.42 mb
Download

Go to site of 92

Summary
  • Furuno 1823C-BB - page 1

    PRINTED IN JAP AN MARINE RAD AR MODEL1823C-BB MARINE RAD AR MODEL1833C-BB MARINE RAD AR MODEL1933C-BB MARINE RAD AR MODEL1943C-BB MARINE RAD AR MODEL1953C-BB COLOR VIDEO PLO TTER GD-1900C-BB Back ...

  • Furuno 1823C-BB - page 2

    The paper used in this manual is elemental chlorine free. Your Local Agent/Dealer Your Local Agent/Dealer 9-52 A shihar a-cho, 9-52 A shihar a-cho, Nishinom i y a 662-8580, JAPAN Nishinom i y a 662-8580, JAPAN Tele p hone : Tele p hone : 0798-65-2111 0798-65-2111 Fax Fax 0798-65-4200 0798-65-4200 : : FIRST E DITION : FIRST E DITION : DEC. DEC. 2003 ...

  • Furuno 1823C-BB - page 3

    i WARNING Radio Frequency Radiation Hazard The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the trans- mitting antenna at a close distance. Distances at which R ...

  • Furuno 1823C-BB - page 4

    ii T A BL E OF C ONTE NTS EQUIPME NT LIS TS ................................................................................................. iii SYST EM CONFIG URA T IONS .................................................................................. v 1. MOUNTING ................................................................................. ...

  • Furuno 1823C-BB - page 5

    iii EQUIPM ENT LISTS S t anda rd supp ly Name T ype Cod e No. Qt y Remarks Contr ol unit RCU-017 - 1 Proc essor uni t RPU-014 - 1 RSB- 0094-0075 - MO DEL1823C-BB RSB- 0071-057 - MO DEL1833C-BB XN10A-RSB- 0070- 064 - MO DE L1933C- B B , 24 rpm XN10A-RSB- 0073- 064 - MO DE L1933C- B B , 48 rpm XN12A-RSB- 0070- 059 - MO DE L1943C- B B , 24 rpm XN12A-R ...

  • Furuno 1823C-BB - page 6

    iv Op ti onal su pp l y Name T ype Code No. Qty Remark s 000- 013- 484 For G D-1900 C-BB , 100 V AC 000- 013- 485 For G D-1900 C-BB , 1 10 V AC 000- 013- 486 For G D-1900 C-BB , 220 V AC PR-62 000- 013- 487 1 For G D-1900 C-BB , 230 V AC Re c tifie r RU-3 423 000- 030- 443 1 For M ODEL seri es Ext ernal buzzer X H3-BZ -L970 000- 146- 422 1 M J-A6S ...

  • Furuno 1823C-BB - page 7

    v SYSTEM CONFIGU R A TIONS Al l NavNet pr oduc ts i ncorpor ate a "netw ork ci rcuit board" t o i ntegrat e each N avN et prod uct on board t hrough a n opti onal LAN cable (Et her net 10BASE-T ). Each NavNet prod uct i s assi gned a n I P addres s to enabl e tr ansfer of i mages b etw een other Na vNet product s. F or exampl e, vi deo pl ...

  • Furuno 1823C-BB - page 8

    vi Sin gl e-u ni t NavNet s ystem (G D- 19 00C -BB) Network Sounder ETR-6/10N ETR-30N GPS receiver GP-310B/320B 12 - 24 VDC 100/110/115/220/230 VAC 1 φ , 50/60 Hz : Standard : Option Plotter, etc. Rectifier PR-62 Monitor (Owner supply) Facsimile Receiver FAX-30 Other NavNet system (Model 1833C-BB, etc.) Processor unit RPU-014 Control unit RCU-017 ...

  • Furuno 1823C-BB - page 9

    vii Thre e- o r-mo r e-u n it NavNet syst em HUB Network Sounder ETR-6/10N ETR-30N (option) Radar Antenna Unit OR GPS Receiver GP-310B/320B Radar Antenna Unit OR GPS Receiver GP-310B/320B Sounder data Radar data Plotter data Network Sounder ETR-6/10N ETR-30N (option) F acsimile Receiver F AX-30 (option) Sounder data F acsimile data RAD AR or PLO TT ...

  • Furuno 1823C-BB - page 10

    viii T w o- u n it NavN et syst em Radar Antenna Unit OR GPS Receiver GP-310B/320B Radar , plotter data Radar , plotter data Radar Antenna Unit OR GPS Receiver GP-310B/320B RAD AR or PLO TTER RAD AR or PLO TTER T wo-unit NavNet system ...

  • Furuno 1823C-BB - page 11

    1-1 1. MOUNTING 1.1 Mounting the Contr ol Unit The control unit can be inst alled on a desktop or f lush m ounted in a console or panel. For flush m ount ing, the optional f lush m ount kit is required. W hen selecting a m ounting location f or the cont rol unit keep the f ollowing in mind: • Keep the cont rol unit out of direct sunlight. • The ...

  • Furuno 1823C-BB - page 12

    1-2 M ounti ng pr oce d ure Flush m ount ing Fol l ow t he procedur e below t o m ount the cont rol uni t on a p anel w it h acces sor i es FP03- 10001. 1. Prep are a cut o ut i n t he m ount i ng l ocat ion, ref er r i ng to t he outl i ne draw ing at the end of thi s manual . 2. Set t he cont r ol uni t to t he cut out . 3. Att ach the mount ing ...

  • Furuno 1823C-BB - page 13

    1-3 De sktop m ountin g Use the opt i onal deskt o p m ou nt k i t FP03-099 01 (Code n um be r 008- 443-54 0). No. Na me T ype Code No. Qty 1 Hang er fix tur e 19-023- 10 61 100-307- 9 41 1 2 Hang er fix tur e 19-023- 10 62 100-307- 9 51 1 3 T ap pi ng sc r e w 5 x 20 000-802- 0 81 4 4 Hex b olt M5 x 10 000-802- 288 2 1. Fi x t he hanger f ix t ure ...

  • Furuno 1823C-BB - page 14

    1-4 1.2 Mountin g the Pro cessor Uni t T he uni t can be mount ed on th e deck, a deskt o p or on a bul khe ad. S el ect a mount i ng loc at i on c ons i deri ng the poi nt s bel ow . • Locate t he u ni t out of di r ec t sunli ght. • Sel ec t a l ocat i on w here t emperat ure a nd hum i di ty are m oderat e and stabl e. • Consi der t he len ...

  • Furuno 1823C-BB - page 15

    1-5 1.3 Mounting the Antenna Unit of MODEL1823C-BB Mounting consider ati ons W hen selecting a m ounting location f or the ant enna unit keep in m ind the f ollowing points. • Inst all t he antenna unit on t he hardt op, radar arch or on a m ast on an appropriate platf orm . (For sailboats, a m ount ing bracket is optionally available.) It should ...

  • Furuno 1823C-BB - page 16

    1-6 Mounting the antenna unit of MODEL1823C-BB 1. Rem ove m ounting hardware at the bottom of the ant enna unit; f our each of hex. bolts (M10X20), spring w ashers and flat washers. Sav e m ounting hardware to use it to fix the antenna unit to t he m ounting platf orm later on. Flat washer Spring washer He x bolt (M10 x 20) Screws two screws on oth ...

  • Furuno 1823C-BB - page 17

    1-7 Remov e and discard the pac king mater ial. Snap holder Antenna unit, inside view 4. The m ount ing base is f itt ed with a snap holder , which may be used to hang the cover aft er rem oval. Use t he hole next t o screw hole inside the cover to hang it. a) Unfast en t he snap assy . with the string at tached at the holder in t he mounting base. ...

  • Furuno 1823C-BB - page 18

    1-8 5. Unf asten the rotat ion detector cable f rom the cable clam ps. 6. Unfasten 16 screws ( ! 1 , ! 2 and ! 3 in the f ollowing figure) to dism ount t he shield plat e, core case and core case cover . GND IF +V OP GND -V OP Vt GND Pan head screws M3x10 2 pcs. 2 Shield plate Pan head screws M4x8 9 pcs. Pan head screws M4x10 5 pcs. Core case cover ...

  • Furuno 1823C-BB - page 19

    1-9 7. Pass the antenna cable with connector through the cable gland, gasket and cable entrance of t he antenna unit, and t hen tighten cable gland. Note 1: Be sure the shrink tube on the antenna cable does not cont act the gasket. Note 2: Pinch the gasket tightly and insert it int o t he cable ent rance. Conf irm that the slit in the gasket is com ...

  • Furuno 1823C-BB - page 20

    1-10 9. Attach connectors of the ant enna cable t o the locations shown in the figure below , and then f ast en a pan head screw M 4x10 to fix shield cable and core case (rem oved at step 6.) J801 (9 pin) J809 (4 pin) J810 (13 pin) Pan head screws M4x10 9 pcs. Antenna unit, connect or locat ion and fixing the shield cable w/core case 10. Put t he E ...

  • Furuno 1823C-BB - page 21

    1-11 12. Pass t he cable f rom t he rot ation detector t hrough t wo cable clamps. Rotate detector Cable clamps Cable tie (Another should be inside.) Antenna unit, clamping the rot at ion detector cable 13. F ollow the instructions on t he label inside t he m ounting base to secure the snap assy . 14. Conf irm that t he rubber gasket is properly po ...

  • Furuno 1823C-BB - page 22

    1-12 Mounting plate Suppor t plate (1) Suppor t plate (2) Brac ket (1) Brac ket (2) Fixing plate M8 x 20 M8 x 20 M4 x 12 M10 x 25 (supplied with antenna unit) M8 x 20 (A) Assembling the mounting brac ket (B) Fastening antenna to mounting bracket How to assemble and mount the optional mounting bracket ...

  • Furuno 1823C-BB - page 23

    1-13 1.4 Mountin g the A ntenn a Unit of MO DEL1833C-BB M ounti ng c on si der a tio ns See the m ou nt i ng cons i der ati ons for the M ODEL1823C-BB o n pa ge 1-5. T he compas s s af e dis t ance of 0. 90 met er s ( s t a n dard c om pass) and 0. 70 m eter s ( st eeri ng compass ) s h oul d be o bser ved to pre vent de viat i on of the magn eti c ...

  • Furuno 1823C-BB - page 24

    1-14 Antenn a uni t, cover rem oved Flat washer Spring washer Platform Antenna base plate M10 x 25 Hex bolt Radome 5 - 10 mm Apply silicone sealant. Effective thread length 25 mm Gasket How t o fas t en the r adom e base to the m ounting plat f orm Wiring a nd f inal pr epa r ation 4. Dri l l a hol e of appr ox. 20 mm di amet er thr ou gh the deck ...

  • Furuno 1823C-BB - page 25

    1-15 one of t he s c r ew s of t he c abl e clampi ng pl at e. 9. Att ach t hr ee c on nect ors of t he si gnal c abl e to r es pec t i ve rec eptac l es as s h ow n below . to one of the screws of the cable clamping plate 9-pin connector: to J801 on MD-9208 4-pin connector: to J802 on MD-9208 13-pin connector: to J611 on IF-9214A Si gnal c ab le, ...

  • Furuno 1823C-BB - page 26

    1-16 10. Att ach t he EMI core supplied as shown below . J806 J805 J803 J804 J802 J801 Motor J613 J611 J1 EMI core E04SS251512 (Abov e cable clamping plate) Cable entrance IF9214 IF9214A PTU-9335 MD-9208 Cable clamping plate How to a ttach EM I core 1 1. F ix the shield cover . Do not pinch t he cable. 12. Att ach the radom e cover , aligning t ria ...

  • Furuno 1823C-BB - page 27

    1-17 Mounting the optional mounti ng bracket A m ount ing bracket f or fast ening t he antenna unit f or the MODEL1833C-BB to a m ast on a sailboat is optionally available. Mounting brac ket 1 T ype: OP03-92 Code No.: 008-445-070 T able 1-1 Mounting bracket contents Ty pe Code No. Qty Hex. bolt M4X12 000-804-725 4 Hex. bolt M8X20 000-805-707 8 Moun ...

  • Furuno 1823C-BB - page 28

    1-18 1.5 Mounting the A ntenna Unit of MODE L1933C-BB /1943C-BB /1953C-BB M ounting consider ations • T he antenna uni t i s general l y i ns t all ed ei t her on t op of t he w heelhouse or on t he r adar mast on a s ui t able pl at form. Loc at e the ant enna unit w here there i s a good al l- r ound vi ew . An y o bs tr u ct ion will ca u se s ...

  • Furuno 1823C-BB - page 29

    1-19 Moun ti ng the an te nn a un it of MOD E L19 33C -B B/ 19 43C -BB/1 95 3C -BB Referr i ng t o t he outl i ne dr aw ing at the back of t hi s manual, dr i ll fi ve holes i n t he mount i ng plat for m : four hol es of 15 mm di amet er f or f i xing t he antenn a uni t and on e hol e of 25- 3 0 mm diam et er f or t he si gnal cabl e. Fasten in g ...

  • Furuno 1823C-BB - page 30

    1-20 Mounting the antenna unit The antenna unit can be m ount ed using the f ixing holes on the outside (200 x 200 m m ) or inside (140 x 150 mm ) t he antenna unit. Using outside fixing holes of the antenna hous ing Use the hex head bolts (supplied) to m ount t he antenna unit as below . 1. Lay the corrosion-proof rubber m at (supplied) on the m o ...

  • Furuno 1823C-BB - page 31

    1-21 3. Insert f our hex bolts (M12x60, supplied) and seal washers ( Ф 30, supplied) from the t op of t he ant enna housing, as shown below . He x bolt Seal washer Flat washer Spring washer Nut Fixing the antenna unit chassis 4. Pass f lat washers (M 12, supplied), spring washers (M12, supplied) and nuts (M12, supplied) onto hex bolts. F ast en by ...

  • Furuno 1823C-BB - page 32

    1-22 8. Coat ground t erm inal and ground point with silicone sealant as show n below . Ground wire Hex bolt Flat washer Spring washer Flat washer Hex nut Silicone sealant Hex nut Weld here. Silicone sealant Ground wire antenna unit OR Flat washer Spring washer Ground wire GROUND TERMINAL GROUND POINT He x nut How to coat ground point and ground t ...

  • Furuno 1823C-BB - page 33

    1-23 Using inside fixing holes of the antenna hous ing This m ethod requires rem oval of t he RF unit in the ant enna unit to access inside f ixing holes. Use hex head bolts, f lat washers, spring w ashers and nuts (local supply) to m ount the antenna unit, confirm ing length of bolt s. 1. Unfast en f our scanner bolts on t he cover to open the ant ...

  • Furuno 1823C-BB - page 34

    1-24 Connecti ng th e si gnal cabl e Only the signal cable runs fr om t he processor unit (1953C-BB: power supply unit) to the antenna unit. I n order t o m inim ize the chance of picking up elect r ical int erference, avoid where possible routing the signal cable near other onboard electrical equipm ent. Also, avoid running the cable in parallel w ...

  • Furuno 1823C-BB - page 35

    1-25 CABLE GLAND Plate Gasket Flat washer Bolt Vinyl sheath within 4 cm T ubing Shield How to fix signal cable in cable gland 6. Unf asten f our screws show n in the f igure below . F our screws Antenna unit chassis, cover opened 7. Pass the signal cable through t he cable protector . Cable protector Antenna unit chassis, cover opened ...

  • Furuno 1823C-BB - page 36

    1-26 8. Connect the signal cable t o the RTB Board (03P9249 or 03P9250), referring t o t he interconnection diagram and the f igure below . 9. Attach t hree EMI cores to the signal cable as shown below . Route cable along here . Lead in cable here . J821 VH9P R TB Board J824 NH13P J823 VH4P EMI core RFC-13 Clamp Antenna unit chassis, cover opened 1 ...

  • Furuno 1823C-BB - page 37

    1-27 1.6 Mountin g the P o wer Suppl y Unit of MOD EL1953C-BB A pow er supply uni t is s hi pped wi th t he M1953C - B B , because of i t s hi gh pow er consum pt ion. T he pow er s uppl y unit c an be i nstalled al mos t anyw here provid ed t he l oc at i on is dry , w e ll- venti l ated, suf f ici ent m ai nt enanc e s p ace i s pro v ided a nd i ...

  • Furuno 1823C-BB - page 38

    1-28 1.7 Mountin g the Memory Card Interface Un it Flush m ount ing T his uni t c an be f lus h- m ount ed i n a pan el wit h the stand ard i nst all ation mat eri al s. 1. Pr epar e a c ut out i n t he m ount i ng l ocat i on, refer r i ng t o t he outl i ne dr aw i ng at t he end of thi s manual . 2. Sc r ew i n the threade d rods t o the f l ang ...

  • Furuno 1823C-BB - page 39

    2-1 2. WIRING 2.1 S t andard Wiring All wirings are terminated at the rea r of the processor unit. CAUTION The processor unit and power supply unit are shipped with 15 A fuse. Replace fuse with 7 A or 3 A depending on input voltage as below. Attach appropriate label (supplied) to the fuse cover on the power cable. Use of wrong fuse can result in da ...

  • Furuno 1823C-BB - page 40

    2-2 DJ-1 For MODEL1823C-BB/1833C-BB/1933C-BB/1943C-BB/1953C-BB, rem ove the wa terproof ing cap fr om t he DJ-1 port on the processor unit and discard it . GD-1900C-BB: Do not rem ove the waterproofing cap. W rap t he connect or nut and cap with v inyl tape as shown below . Connector nut (f or 24P) W aterproofing cap (yellow) Vinyl tape Waterproofi ...

  • Furuno 1823C-BB - page 41

    2-3 Connecti ng GP -310B/ 320B to D A T A 2 p o r t GPS receiver GP-310B/320B can be connected t o DA T A 2 port as shown below when port 1 is not available. Y ou need a j unct ion box and optional cable MJ-A6SPF0003-050 or MJ-A6SPF0009-100. 1 2 3 4 5 6 7 JUNCTION BO X 1 2 3 4 5 6 TD-A TD-B RD-A RD-B NC SHIELD PROCESSOR UNIT D ATA 2 + 12V GND WHT B ...

  • Furuno 1823C-BB - page 42

    2-4 2.2 Wiring of Po wer Supply Unit (MODEL1953C-BB only) 1. Loosen three M4 screws to remove the cable cl amp of the po wer supply unit PSU-00 5. 2. Loosen six M4 screws to remove the unit cover . 3. Attach the VL connector of power supply cable VL3P-VV-S2X2C-AA050 (supplied as installation m aterial) to J1 on the POW ER Board. 4. Attach the VH ...

  • Furuno 1823C-BB - page 43

    2-5 Note: The power for the power supply unit and processor unit m ust be drawn from t he sam e power sw itch on the ship’s pow er term inal board. Other Equipment (ex. GPS, E/S, etc.) Ship's power terminal board Power supply unit Other Equipment (ex. GPS, E/S, etc.) Other Equipment (ex. GPS, E/S, etc.) Other Equipment (ex. GPS, E/S, etc.) O ...

  • Furuno 1823C-BB - page 44

    2-6 2.3 Connection of CU-200 1) Connection between one processor unit and one memory card IF unit Connect as shown in the figure below . Processor unit Memory card IF unit OUTPUT 12VDC NETWORK 12 VDC NETWORK MJ-A3SPF0026-050/100 (5/10 m) MJ-A6SPF/TM11AP8C050/100(5/10m) two mini-cards 12 VDC RJ-45 2) Connection between one memory card IF unit and mu ...

  • Furuno 1823C-BB - page 45

    3-1 3. A D J USTM ENT 3.1 Ho w to A ccess the I nst allati on Menu Set up t he equi pm ent throug h the i nstal l ation m enu af ter compl et i ng t he i nst all ati on. T o access t he i ns t all ati on menu, f ol l ow the s t ep s bel ow . 1. W ith the disp lay po w ered off, h old do w n the [ M ENU ] ke y. T hen, m om ent ari ly press the [PO W ...

  • Furuno 1823C-BB - page 46

    3-2 3.2 NETWORK SETUP Menu Set up the NavNet network to commu nicate with other Nav Net equipment. 1. Open the INST ALL SETUP m enu. 2. Press the A: NETWORK SETUP sof t key . EDIT E RETURN IP ADDRESS 172.031.003.007 HOST NAME RADAR________ RADAR SOURCE RADAR________ CHART SOURCE* MCDRIVE-1 ____ MCDRIVE-2 ____ ______________ SOUNDER SOURCE SOUNDER__ ...

  • Furuno 1823C-BB - page 47

    3-3 Content s of Network setup menu Item Description Default Setting IP ADDRESS This address is assigned at the factory . Change the address (last three digits; 001 to 254) wh en like models are connected dire ctly or through the hub. Do this change before connecting the equip ment to the other equipment or hub in order to disting uish equipment. D ...

  • Furuno 1823C-BB - page 48

    3-4 3.3 RADA R SETUP Menu Af t er s et ti ng up the net w ork, do t he f ol l ow ing i n or der t o adj us t t he radar . Open t he I NST ALL SET UP menu, and t hen press t he B: RA DA R S ET UP s of t key t o di spl ay the RADA R S E T UP m enu. W hen the message “RA DA R DO ES NO T T RANSM I T . T RANSM IT RADAR?” appears, press t he [ ENT ER ...

  • Furuno 1823C-BB - page 49

    3-5 ANTENNA TYPE Select t he an t enna t y pe connec t ed t o y our display uni t . De f ault se t t ing is “ F ”. Select the antenna t ype referring to t he t able shown below . Aft er select ing t ype, press the [ENTER] knob. Y our unit Setting MODEL1823C-BB A MODEL1833C-BB B MODEL1933C-BB F MODEL1943C-BB G MODEL1953C-BB H TUNING MODEL 1953C- ...

  • Furuno 1823C-BB - page 50

    3-6 Antenna tuning Initialize the tuning as f ollows. 1. T ransm it the radar . 2. Open the RADAR SET UP m enu, and then select T UNING by the tr ackball or [ ENTER] knob. 3. Press the A: EDI T sof t key to show the setting w indow . TUNING ON OFF T uning setup menu 4. Sele ct ON. 5. Press the [E NT ER] knob or C: ENTE R sof t key to start the auto ...

  • Furuno 1823C-BB - page 51

    3-7 4. Press the A: EDI T sof t key to show the setting w indow . ON OFF TIMING ADJUST Timing adjust setting menu 5. Select ON and press t he C: ENTER sof t key to show the radar display . PUSH ENTER KNOB AFTER ADJUSTING SWEEP TIMING. E RETURN Timing adjustment setting display 6. Rotate t he [ENTER] knob t o straighten the t arget selected at st ep ...

  • Furuno 1823C-BB - page 52

    3-8 HEADING ADJUSTMENT Y ou have m ounted the ant enna unit f acing straight ahead in t he direct ion of t he bow . Theref ore, a sm all but conspicuous target dead ahead visually should appear on the heading line (zero degrees). In practice, you will probably observ e som e sm all error on t he display because of the difficult y in achieving accur ...

  • Furuno 1823C-BB - page 53

    3-9 M. B. (Main Bang) SUPPRESSION Main bang (black hole), w hich appears at the display center on short ranges, can suppressed as follows. 1. Open the RADAR SET UP m enu and select M.B. SUPPRESSIO N by trackball. 2. Press the A: EDI T sof t key to show the setting w indow . 3. Sele ct ON. 4. Press the C: ENT ER soft key to start the adj ustm ent. E ...

  • Furuno 1823C-BB - page 54

    3-10 STC CUR VE T he defaul t ST C cur ve can b e m ai nt ained i n m os t cases. If necess ar y the STC cur ve can be cha nge d as foll ow s: 1. Open t he RA D AR SET UP menu and sel ect ST C CUR VE . 2. Pre ss th e A : EDIT soft k e y to sh o w th e s etting windo w . E RETURN NARRO W NORMAL WIDE STC CUR VE STC c ur v e s et ti ng w i ndow 3. Sel ...

  • Furuno 1823C-BB - page 55

    3-1 1 3.4 C hecking Magnetr on H eater V olt age Note : T his confi r m at i on/ adjus t ment s houl d onl y be perfor m ed by a qual i f ied s er vi c e techni ci an. M agnet ron he ater volt age is f or m ed on t he PT U (1833C-B B) / M D (1823 C-BB / 193 3C- BB / 1943C- B B / 19 53 C-B B ) Boar d of the ant en na uni t, and prea djus t ed at t h ...

  • Furuno 1823C-BB - page 56

    3-12 2. Select POSIT I ON SOURCE and then press t he A: EDIT sof t key to show the position source wi ndow . POSITION SOURCE ▲ ▼ FUR UNO BB GPS GP LC ALL 3. Select FURUNO BB G PS, GP , LC or ALL as appropriate and press the C: ENT ER soft key . FURUNO BB GPS: GPS Receiv er GP-310B/320B GP: GPS navigator (via NETW ORK, DA T A 1, or DA T A2 conne ...

  • Furuno 1823C-BB - page 57

    3-13 GPS SETUP LOCAL TIME OFFSET +00:00 GEODETIC DATUM WGS-84 POSITION SMOOTHING 000 second(s) SPD/CSE SMOOTHING 005 second(s) GPS SPEED AVERAGE 060 second(s) LATITUDE OFFSET 0.000’N LONGITUDE OFFSET 0.000’E DISABLE SATELLITE - - - - - - LATITUDE 45 ° 35.000’ N LONGITUDE 125 ° 00.000’ W ANTENNA HEIGHT 005 m GPS FIX MODE 2D/3D COLD START N ...

  • Furuno 1823C-BB - page 58

    3-14 Contents of G PS sensor set tings menu Item Description Settings Default Setting Local T ime Of fset Allows the user to us e local time (i nstead of UTC time). Enter time dif ference between local ti me and UTC time. Use the A: + < - - > - soft key to sw i t ch from plus to m i nus and v i c e v er s a. -13:30 to +13:30 hr 0 hr (no offse ...

  • Furuno 1823C-BB - page 59

    3-15 Contents of G PS sensor set tings menu (con’ t.) Item Description Settings Default Setting Long i tude O f f s et O f f s et for l ong i tude. U s e the A: W < - - > E soft key to switch co ordinate. 9.999’E – 9.999’W 0.0’ (no offset) Disable Sat ellite Every GPS satellite is broadcasting abnormal satellite number (s) in its Al ...

  • Furuno 1823C-BB - page 60

    3-16 3.6 Setting up Dat a Port s Setup t he dat a port s accor di ng t o the equi pm ent connecte d t o them as f ol l ow s . 1. Press t he [M ENU] key t o open t he men u. 2. Pre ss the E: S Y S TEM CONF IG URA TION, C: S Y ST EM SETUP and A: PORT SE TUP soft key s. 3. Pres s th e A: GP S/N MEA P ORT soft k ey fo r D A T A 1 p ort, o r B : N MEA P ...

  • Furuno 1823C-BB - page 61

    3-17 7. Sel ec t sent enc e a nd press t h e A: O N/ OFF s of t key t o show ON (output ) or “- - “ ( no output ) as ap pro pri ate. 8. Press the E : RET URN sof t key . 9. Pre ss th e [MEN U] k ey to q uit. Conte nt s of DA T A 1 and DA T A2 POR T menus Item Descri pt ion Sett in gs D ef ault Set t ing FURUNO G PS Sensor Selects wheth er the G ...

  • Furuno 1823C-BB - page 62

    3-18 3.7 Rem ote Sy stem Setting M O DEL 1800C/ 1 900 C-BB s er i es Na vNet s y stem can be us e d as a rem ot e sy s t em f or F AR/FR- 2805, 21 05 s er i es, et c. , by usi ng opt i onal c abl e ass y MJ- B 24LP F 0008- 100 ( 10 m), 200 (2 0 m ) or 300 ( 3 0 m). T o use the proc es s or u nit as a r em ot e sy st em , do the fol l owi ng: 1. O p ...

  • Furuno 1823C-BB - page 63

    4-1 4. OPTIONS 4.1 Exter nal Buzzer C onnection T he opti onal ext er nal buzzer pr ovi des a l ouder al ert w hen the al arm i s viol at ed. External buzzer T ype: X H3-BZ-L970 Code no.: 000-146-422 1. Unfast en 1 1 screw s and 9 connect ors t o r em ove the c over . 2. Use a kni fe t o cut a “ cr os s ” i n t he r ubber bus hi ng on the rear ...

  • Furuno 1823C-BB - page 64

    4-2 4.2 A RP Kit ARP-1 1 Necessary p art s Na me : ARP k it T y pe: ARP-1 1 Code no.: 008-523-050 T able ARP -1 1 content s N ame T ype Code N o. Qty ARP Boar d 18P9013 008-521- 830 1 Pan head scr ew M 3x6 C 2700W 000-881-403 4 SQ9 000-801- 850 1 S pacer * SQ15 000-801- 779 3 S pring w asher* M 3 C5191W 000- 864-204 3 *Not us ed 1. Unfast en 1 1 sc ...

  • Furuno 1823C-BB - page 65

    4-3 3. M at e P107 on t he ARP B oar d t o J1 12 on the 19P1001 board and fas t en the ARP boar d w it h four screw s. 19P1001 board J112 4. M ount the s hi el d pl at e and t he19P1015 board and c onnec t P1361 and P1357 t o the 19P1015. 5. Reassembl e t he pr oc es sor uni t . ...

  • Furuno 1823C-BB - page 66

    4-4 T hi s p age i s i ntent i onally lef t bl ank. ...

  • Furuno 1823C-BB - page 67

    MODEL 1823C-BB MODEL 1833C-BB A-1 ...

  • Furuno 1823C-BB - page 68

    A-2 ...

  • Furuno 1823C-BB - page 69

    A-3 ...

  • Furuno 1823C-BB - page 70

    M1933C-BB/1943C-BB A-4 ...

  • Furuno 1823C-BB - page 71

    A-5 ...

  • Furuno 1823C-BB - page 72

    A-6 ...

  • Furuno 1823C-BB - page 73

    ＰＡＣＫＩＮＧ ＬＩＳＴ 19AQ-X-9852 -2 RCU-017-E-5-CS/RCU-017-E-10-CS N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 操作部 CONTROL UNIT RCU-017-E 000-080-537 1 その他部品 OTHER PARTS ﾊｰﾄﾞｶﾊﾞｰ HARD COVER 06-021-2121-1 100-320-101 1 付属品 ACCESSORIES 付属品 ACCESSORIES FP03-1000 ...

  • Furuno 1823C-BB - page 74

    CODE NO. CODE NO. CODE NO. CODE NO. 008-537-530 TYPE TYPE TYPE TYPE FP03-10001 略  図 OUTLINE 名  称 NAME 数量 Q' TY 用途／備考 RE MAR KS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -1 ACCESSORIES 付属品表 付属品表 付属品表 付属品表 19AQ-X-9503 ﾌﾗｯｼｭﾏｳﾝﾄ金具 MOUNTING PLATE 19-023-1051-0 1 ...

  • Furuno 1823C-BB - page 75

    ＰＡＣＫＩＮＧ ＬＩＳＴ 19AN-X-9851 -1 PSU-005 N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 空中線電源部 POWER SUPPLY UNIT PSU-005 000-080-190 1 予備品 SPARE PARTS SP03-14001 ﾋｭｰｽﾞ FUSE FGBO 7A AC125V 000-549-013 3 ﾋｭｰｽﾞ FUSE FGBO 15A AC125V 000-549-014 3 工事材料 INSTALLAT ...

  • Furuno 1823C-BB - page 76

    ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ 03GO-X-9854 -0 CU-200-NAVBB-* CU-200-NAVBB-* CU-200-NAVBB-* CU-200-NAVBB-* N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット ユニット ユニット ユニット UNIT UN IT UN IT U ...

  • Furuno 1823C-BB - page 77

    CODE NO. CODE NO. CODE NO. CODE NO. 008-539-520 TYPE TYPE TYPE TYPE CP03-27401 略  図 OUTLINE 名  称 N AME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 INSTALLATION MATERIALS 工事材料表 工事材料表 工事材料表 工事材料表 03GO-X-9403 ﾊﾞﾈ座金 SPPING WASHER M4 SUS304 4 0 ...

  • Furuno 1823C-BB - page 78

    CODE NO. CODE NO. CODE NO. CODE NO. 008-539-530 TYPE TYPE TYPE TYPE FP03-10201 略  図 OUTLINE 名  称 N AME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 -0 ACCESSORIES 付属品表 付属品表 付属品表 付属品表 03GO-X-9502 ﾊﾝｶﾞｰ MOUNTING BRACKET 19-023-3081-0 1 100-316-250 1 COD ...

  • Furuno 1823C-BB - page 79

    Y. Hatai D-1 ...

  • Furuno 1823C-BB - page 80

    Y. Hatai D-2 ...

  • Furuno 1823C-BB - page 81

    Y. Hatai D-3 ...

  • Furuno 1823C-BB - page 82

    Y. Hatai D-4 ...

  • Furuno 1823C-BB - page 83

    Y. Hatai D-5 ...

  • Furuno 1823C-BB - page 84

    Y. Hatai D-6 ...

  • Furuno 1823C-BB - page 85

    D-7 Takahashi T . ...

  • Furuno 1823C-BB - page 86

    Y. Hatai D-8 ...

  • Furuno 1823C-BB - page 87

    Y. Hatai Y o s h i t o s h i  H a t a i 電 子 署 名 者  :  Y o s h i t o s h i  H a t a i  D N :  c n = Y o s 署 名 は 無 効 で す D-9 ...

  • Furuno 1823C-BB - page 88

    Y. Hatai Y o s h i t o s h i  H a t a i 電 子 署 名 者  :  Y o s h i t o s h i  H a t a i  D N :  c n = Y o s 署 名 は 無 効 で す D-10 ...

  • Furuno 1823C-BB - page 89

    FURUNO EL ECTRIC CO., LT D. NAME TYPE 名称 kg DRAWN CHECKED APPROVE D DWG.No. SCALE MASS 12 45 6 3 B A D C 10m MJ-A3SPF MJ-A7SPF MJ-A6SPF MODEL 19 33C -B B/1943 C- BB MJ-A6SP F MJ-A3SPF MJ-A6SPF GYRO NETWORK CU-200 MEMORY CAR D I/F ﾒﾓﾘｶｰﾄ ﾞI/F (19S1005) ,0.5m MJ-A6SRMD /TM11AP8 MJ-A6SP F0014,φ6 MAX.30m J1352 6 5 1 2 3 4 SHIELD E_RD ...

  • Furuno 1823C-BB - page 90

    FURUNO EL ECTRIC CO., LT D. 相互結線図 INTE RCO NNE CTION DI AG RAM 船舶用レーダー MARI NE RAD AR NAME TYPE 名称 kg DRAWN CHECKED APPROVE D DWG.No. SCALE MASS 12 45 6 3 B A D C 12-24 VDC TAKA HAS HI. T PROC ESS OR UNI T 制御部 RPU- 014 *2 J1355 DATA2 DATA1 J1356 *2 VIDE O IN TER FACE ビデオI/ F (NTSC/ PAL) NTSC/PA L VGAモ ニ? ...

  • Furuno 1823C-BB - page 91

    FURUNO ELECTRIC CO., LTD. 相互結線図 INTERCONNE CTION DIAGRA M NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C ｶﾗｰﾋﾞﾃﾞｵﾌﾟ ﾛｯﾀ COLOR VIDEO PL OTTER GD-1900C-BB NOTE *2. CONNECTOR PLUG FITTED AT FACTORY. 注記 *２）コネクタは工場にて取付済み。 *１）現地手配 *1. LOCA ...

  • Furuno 1823C-BB - page 92

    FURUNO ELECTRIC CO., LTD. 相互結線図 INTERCONNE CTION DIAG RAM 船舶用レーダー MARINE RADAR NAME TYPE 名称 kg DRAWN CHECKED APPROVED DWG.No. SCALE MASS 12 45 6 3 B A D C MODEL 1823C -BB/1833C- BB K.MIYAZAWA 19-023-5001- 2 TAKAHASHI.T PROCESSOR UNIT 制御部 RPU-014 *2 MJ-A6SRMD J1355 DATA2 MJ-A6SPF0009,10m φ6 MJ-A6SPF0003,5m MJ-A6SPF ...

Manufacturer Furuno Category Marine GPS System

Documents that we receive from a manufacturer of a Furuno 1823C-BB can be divided into several groups. They are, among others:
- Furuno technical drawings
- 1823C-BB manuals
- Furuno product data sheets
- information booklets
- or energy labels Furuno 1823C-BB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Furuno 1823C-BB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Furuno 1823C-BB, service manual, brief instructions and user manuals Furuno 1823C-BB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Furuno 1823C-BB.

Similar manuals

A complete manual for the device Furuno 1823C-BB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Furuno 1823C-BB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Furuno 1823C-BB.

A complete Furuno manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Furuno 1823C-BB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Furuno 1823C-BB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Furuno 1823C-BB, that we can find in the current document
3. Tips how to use the basic functions of the device Furuno 1823C-BB - which should help us in our first steps of using Furuno 1823C-BB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Furuno 1823C-BB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Furuno 1823C-BB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Furuno 1823C-BB?

Use the form below

If you did not solve your problem by using a manual Furuno 1823C-BB, ask a question using the form below. If a user had a similar problem with Furuno 1823C-BB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)