-
Bixolon SPP-R200II - page 1
User 's Manual SPP -R200 Mobile Printer Rev . 1.09 http://www .bixolo n.com ...
-
Bixolon SPP-R200II - page 2
Rev . 1.09 - 2 - SPP- R200 ■ T able of Content s ※ Manual Information & Usage Precautions ························································ 3 1. Content Confirmation ························································? ...
-
Bixolon SPP-R200II - page 3
Rev . 1.09 - 3 - SPP- R200 ■ Manual Information ※ Manual Information & Usage Precautions This use r ’ s manual contains basic in f ormation f or product usage as well a s f or emergency measures that may be required. ※ The following separate manuals provide more detailed content on various technological issues and areas. 1. Windows CE M ...
-
Bixolon SPP-R200II - page 4
Rev . 1.09 - 4 - SPP- R200 ■ Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. W A RNING Violating following instructions can cause serious injury or death. Do not bend the cable by force or lea ve it unde r an y heavy object. • A damaged cable can ...
-
Bixolon SPP-R200II - page 5
Rev . 1.09 - 5 - SPP- R200 CAUTION Viol atin g f oll owi ng i nst ructi on s ca n cau se slig ht w ou nd or dama ge th e a p pli ance . Do not u se the prin ter w hen it is out of order . Th is can cause a fire or an electrocution. • Switch of f and unplug the printer before calling your dealer . Do not let water or other foreign object s in the ...
-
Bixolon SPP-R200II - page 6
Rev . 1.09 - 6 - SPP- R200 ■ Battery Safety Precautions Make sure to review the user manual carefully prior to product use. Neglecting to heed the fo llowing instructions can result in battery o verheating, combustion, explosion, damage and/or decline in performance and product life . Danger 1. Do not allow water, seawater, etc. enter or leak int ...
-
Bixolon SPP-R200II - page 7
Rev . 1.09 - 7 - SPP- R200 10. Do not pierce the battery with a sh arp object, such a s a n ail, or hit it with a heavy object, such as a hammer, and take care not to step on the battery. The battery may rupture or become warped, causing sh ort circuits within tha t may result in ba ttery overheating, combustion, and/or explosion. 11. Do not solder ...
-
Bixolon SPP-R200II - page 8
Rev . 1.09 - 8 - SPP- R200 Caution 1. Do no t use or leave the battery in a location e xposed to high temperatures or intense direct sunlight, such as within an automobile. Doing so can cause battery overheating and/or combustion. In addition, battery performance and product li fe may be reduced. 2. The battery contains a safety me chanism to prev ...
-
Bixolon SPP-R200II - page 9
Rev . 1.09 - 9 - SPP- R200 Recommended 1. Review th e user m anual for instructions concerning insertion/removal of batteries into/from the product. 2. As t he battery is slightly ch arged upon factory shipm ent, use it to conf irm proper product operation upon p urchase. If product ope ration cannot be confirmed or longer use of the product is req ...
-
Bixolon SPP-R200II - page 10
Rev . 1.09 - 10 - SPP- R200 1. Content Conf irmation The following items should all be contained in the printer package. Contact the dealer from which the purchase was m ade if any item is damaged and/or missing. ※ Basic items SPP -R200 Battery Battery Charger Power Cord Belt Strap Paper CD User Manual ※ Optional items Battery Holder Cigarette ...
-
Bixolon SPP-R200II - page 11
Rev . 1.09 - 11 - SPP- R200 2. Product Part Names • Front • Rear Cable Connection Power Connection Battery Belt Strap Hole Interface Cap Paper Cover Power Button MSR Cover BT Cap (Bluetooth Download Connector) Open Button Paper Feed Button ...
-
Bixolon SPP-R200II - page 12
Rev . 1.09 - 12 - SPP- R200 3. Inst allation & Usage 3-1 Battery I nstallation 1) In sert the battery on the rear side of the printer, aligning the battery hook properly. 2) Push the battery into the slot until a snapping sound is heard. NOTE As t he battery is not charged at the time of purchase, charge the battery prior to product use. (Use t ...
-
Bixolon SPP-R200II - page 13
Rev . 1.09 - 13 - SPP- R200 3-2-2 Battery Holder (Optional) Usage 1) Connect the power cord ② to the battery charger ① . 2) Connect the battery charger ① to the power connector of the battery holder ③ . 3) Plug the power cord ② into an electrical outlet. 4) Insert the battery ④ into the battery holder ③ until a snapping sound is heard ...
-
Bixolon SPP-R200II - page 14
Rev . 1.09 - 14 - SPP- R200 3-2-4 Quad Charger (Optional) Usage 3-2-4-1 Connecting the cables 1) Connect the power cord to the adaptor, and Connect the adaptor to the power connector of the Quad Charger. 2) Plug the power cord into a power Outlet. Input power is 100 ~ 24 0VAC, 50/60Hz, 1.4A. 3) W hen power is suppli e d, the amber and green Lamp tu ...
-
Bixolon SPP-R200II - page 15
Rev . 1.09 - 15 - SPP- R200 3-2-4-2 Battery Charging 1) Fasten batteries via the battery hooks into the Quad Charger as shown above. 2) Push the battery in until a snapping sound is emitted. 3) Charging begins as soon as the battery is completely inserted. Batteries are char ged to 8.4VD C, 0.8A . 4) Push the hook and pull up to extract the battery ...
-
Bixolon SPP-R200II - page 16
Rev . 1.09 - 16 - SPP- R200 3-3 Paper Insta l lation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the image. (Remove any remaining core of a fully used paper roll.) 3) Take care to align the paper correctly. 4) Pull the paper out as shown in the image and close the paper cover. 5) Tear off any excess paper in th ...
-
Bixolon SPP-R200II - page 17
Rev . 1.09 - 17 - SPP- R200 3-4 Belt Strap Usa ge 1) Insert the belt strap screw into the belt strap hole. 2) Use a coin to tighten the belt strap screw as shown in the image. 3) Undo the belt strap Velcro. 4) Fasten the belt strap to a belt. 5) Close the Velcro as shown in the image. Belt Belt S trap Coin Belt ...
-
Bixolon SPP-R200II - page 18
Rev . 1.09 - 18 - SPP- R200 3-5 Leather Case (Optional) Usage 1) Undo the Velcro. 2) Place the printer into the leather case following the direction shown in the image. 3) Close the Velcro. 4) Affix to a belt using the clip at the rear of the case. NOTE The clip on the leathe r case can be rotated two stages by 30° per sta g e (max imum 60° ) Bel ...
-
Bixolon SPP-R200II - page 19
Rev . 1.09 - 19 - SPP- R200 3-6 Control Pane l Usage • Power Button This button is used to turn the printer on and off. W hen th e printer is off, pressing this button for approximately 2 seconds wil l turn the p ower on. W hen the printer is on, pressing this button for approximately 2 seconds will turn the pow e r off. • Paper Feed Button Pap ...
-
Bixolon SPP-R200II - page 20
Rev . 1.09 - 20 - SPP- R200 3-7 MSR Usage 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of the arrow . (can be done in both directions) 3) When finished using, press the MSR cover to close it. NOTE If the card does not regis ter, first check t o see i f it is properly aligned. W hen swiping the ...
-
Bixolon SPP-R200II - page 21
Rev . 1.09 - 21 - SPP- R200 • Self -T est Printout Sample Boot loader versio n : VER v2.01 20 071005 Firmware version : V01.00 STOB 080901 Bluetooth Firmwar e version : 3.0 .0 Bluetooth BD add ress : 001901223194 Auth. & Encry . a re enable Connection Mode = 2 ================================ Butter Capacity : 128K Bytes Print Density : 10 0% ...
-
Bixolon SPP-R200II - page 22
Rev . 1.09 - 22 - SPP- R200 5. Label Printin g Function 5-1 Label Fun ction Setting Label paper and black mark p aper available at the label mode . • Setting Operations 1) T urn on the printer p ower. 2) Open the paper cover and press and hold d own the p a per feed button for longer than two seconds. 3) After the buzzer tone is emitted, insert p ...
-
Bixolon SPP-R200II - page 23
Rev . 1.09 - 23 - SPP- R200 6. Peripherals C onnection This product can communicate with other dev ices via Bluetooth communication and cable. 6-1 Bluetooth Con nection 1) The printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.). 2) Use the Bluetooth connection function supported by the device to conn ...
-
Bixolon SPP-R200II - page 24
Rev . 1.09 - 24 - SPP- R200 7. Printer Cleani ng If the interior of the printer is dusty, print quality ca n decline. In such a case, follow the instructions below to clean the printer. CAUTION • Make sure to turn the printer power off prior to cleaning. • As the pr int head gets very hot during printing, if intendin g to clean the print head, ...
-
Bixolon SPP-R200II - page 25
Rev . 1.09 - 25 - SPP- R200 8. Appendix 8-1 Specifications Item Description Printing Printing Method Thermal printin g Printing Speed 80 mm/sec Resolution 203 DPI Paper Supply Mode Easy paper loadi ng Character Siz e Font A: 12 × 24 Font B: 9 × 24 Characters Per Line Font A: 32 Font B: 42 Character Set English: 95 Expanded Graphics: Standard(ENG ...
-
Bixolon SPP-R200II - page 26
Rev . 1.09 - 26 - SPP- R200 8-2 Certification 1) EMC & Safety S tandards • Europe: CE Mark: CE 0984, DEMKO GS: EN60950-1: 2001 • North America : FCC rules part 15C • Safety S tandards: CB -scheme: IE C60950-1: 2001 WARNING Use o f an u n protected inter f ace cable with this printer confli cts w ith EMC standards. Users should only use ca ...
Do you have a question concerning Bixolon SPP-R200II?
Use the form below
If you did not solve your problem by using a manual Bixolon SPP-R200II, ask a question using the form below. If a user had a similar problem with Bixolon SPP-R200II it is likely that he will want to share the way to solve it.