English dropdown-ico

Manual Philips TDA8783

28 pages 0.12 mb
Download

Go to site of 28

Summary
  • Philips TDA8783 - page 1

    DA T A SH EET Product specification Supersedes data of 1999 J un 25 2002 Oct 23 INTEGRA TED CIRCUITS TDA8783 40 Msps, 10-bit analog-to-digital interface for CCD cameras ...

  • Philips TDA8783 - page 2

    2002 Oct 23 2 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interface f or CCD cameras TD A8783 FEA TURES • Correlated Double Sampling (CDS), AGC, 10-bit ADC and reference regulator included, adjustable bandwidth (CDS and AGC) • Fully programmable via a 3-wire serial interface • Sampling frequency up to 40 MH ...

  • Philips TDA8783 - page 3

    2002 Oct 23 3 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 QUICK REFERENCE D A T A SYMBOL P ARAMETER CONDITIONS MIN. TYP . MAX. UNIT V CCA analog supply voltage 4.75 5 5.25 V V CCD digital supply voltage 4.75 5 5.25 V V CCO digital outputs supply voltage 2.5 3 5.25 V I CCA anal ...

  • Philips TDA8783 - page 4

    2002 Oct 23 4 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 BLOCK DIA GRAM Fig.1 Block diagram. handbook, full pagewidth MGM491 TRACK- AND-HOLD TRACK- AND-HOLD TRACK- AND-HOLD CLAMP ref1 CLAMP 8-BIT DAC 10-BIT DAC 9-BIT DAC 6 dB AGC CLOCK GENERATOR 10-BIT ADC REGULATOR SERIAL IN ...

  • Philips TDA8783 - page 5

    2002 Oct 23 5 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 PINNING SYMBOL PIN DESCRIPTION CLPOB 1 clamp pulse input at optical blac k A GND4 2 analog g round 4 OFDOUT 3 analog output of the additional 8-bit control D AC (controlled via the serial interf ace) AMPOUT 4 CDS ampli? ...

  • Philips TDA8783 - page 6

    2002 Oct 23 6 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 V CCO 37 digital output supply v oltage OE 38 output enable (activ e LOW: digital outputs activ e; active HIGH: digital outputs high impedance) V CCD2 39 digital supply v oltage 2 DGND2 40 digital ground 2 CLK 41 ADC cl ...

  • Philips TDA8783 - page 7

    2002 Oct 23 7 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 LIMITING V ALUES In accordance with the Absolute Maximum Rating System (IEC 60134). Note 1. The supply voltages V CCA , V CCD and V CCO may have any value between − 0.3 and +7.0 V provided that the supply voltage diff ...

  • Philips TDA8783 - page 8

    2002 Oct 23 8 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 CHARA CTERISTICS V CCA =V CCD =5V ; V CCO =3V ; f CLK = 27 MHz; T amb =2 5 ° C; unless otherwise specified. SYMBOL P ARAMETER CONDITIONS MIN. TYP . MAX. UNIT Supplies V CCA analog supply voltage 4.75 5 5.25 V V CCD di ...

  • Philips TDA8783 - page 9

    2002 Oct 23 9 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 t hd2 hold time of IND compared to control pulse SHD see Fig.5 − 1 − ns t set(CDS) CDS settling time see Fig.12; control D AC 4 bits input code; A GC gain = 0 dB; f cut(AGC) = 54 MHz; V i(CDS) = 600 mV (p-p) blac k- ...

  • Philips TDA8783 - page 10

    2002 Oct 23 10 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Clamps g m(ADC) ADC clamp transconductance at clamp le vel − 7 − mS g m(CDS) CDS clamp transconductance at clamp le vel − 1.5 − mS Analog-to-Digital Con ver ter (ADC) f CLK(max) maximum cloc k frequency 40 −? ...

  • Philips TDA8783 - page 11

    2002 Oct 23 11 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Notes 1. More information about CDS related signals is available in the following figures: The clamp current for pin CPCDS is given in Fig. 9, clamp current for pins IND and INP in Fig 10 and for clamp current for pin ...

  • Philips TDA8783 - page 12

    2002 Oct 23 12 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.3 Serial interface block diagram. handbook, full pagewidth OFD LATCHES AGC GAIN LATCHES FREQUENCY LATCHES PARTIAL STANDBY AND EDGE CLAMP REFERENCE LATCHES LATCH SELECTION D0 LSB MSB S D ATA SCLK SEN 8-bit D AC 10-b ...

  • Philips TDA8783 - page 13

    2002 Oct 23 13 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 T able 1 Serial interface progr amming Note 1. When CLPADC is HIGH (D4 = 1: serial interface), the ADC input is clamped to voltage level V ref . V ref is connected to ground via a capacitor. T able 2 Standby selection ...

  • Philips TDA8783 - page 14

    2002 Oct 23 14 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 handbook, full pagewidth MGR395 N IND SHP 1.4 V SHD CLK ADCIN DATA N + 3 N + 2 N + 1 N − 1 N N t CDS t CPH t d(s) t d t o(d) t o(h) t n(IN; SHP) t n(IN; SHD) 90% 10% 1.4 V 1.4 V N − 3N − 2 Fig.5 Pixel frequency t ...

  • Philips TDA8783 - page 15

    2002 Oct 23 15 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.6 Line frequency timing diagram. (1) When dummy pixels are not available. handbook, full pagewidth MGR396 CLP ADC (active HIGH) CLPDM (active HIGH) CLPOB (active HIGH) OPTICAL BLACK HORIZONT AL FL YBLA CK DUMMY VID ...

  • Philips TDA8783 - page 16

    2002 Oct 23 16 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.7 AGC gain as a function of DAC input code. handbook, halfpage MGM507 G AGC (dB) 34.5 4.5 0 319 511 AGC control DAC input code Fig.8 DAC voltage output as a function of DAC input code. handbook, full pagewidth 0 AD ...

  • Philips TDA8783 - page 17

    2002 Oct 23 17 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.9 Typical clamp current for pin CPCDS. handbook, halfpage MGR397 + 100 0 − 100 I ( µ A) V (V) 200 mV 2.00 Fig.10 Typical clamp current for pins IND and INP. handbook, halfpage MGR398 + 300 0 − 300 I ( µ A) V ...

  • Philips TDA8783 - page 18

    2002 Oct 23 18 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.12 CDS settling time and bandwidth. (1) f cut . (2) t set (10 bits accuracy). (3) t set (9 bits accuracy). (4) t set (8 bits accuracy). handbook, full pagewidth 160 120 40 0 80 MGR441 F 05 A 16 B 27 C 38 D 49 E 4-b ...

  • Philips TDA8783 - page 19

    2002 Oct 23 19 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.13 AGC bandwidth. handbook, full pagewidth F 60 40 20 0 05 A 16 B 27 C 38 D 49 E MGR401 4-bit control DAC input code f cut (MHz) Fig.14 CDS output. handbook, full pagewidth 1.6 1.6 1.2 0.4 0 0 0.4 1.2 0.8 0.8 0.2 0 ...

  • Philips TDA8783 - page 20

    2002 Oct 23 20 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Fig.15 Output noise (RMS value). (1) f pix = 27 MHz; control DAC = 00H; f cut(CDS) = 120 MHz; f cut(AGC) = 54 MHz. (2) f pix = 18 MHz; control DAC = 10H; f cut(CDS) = 120 MHz; f cut(AGC) = 40 MHz. (3) f pix = 10 MHz; c ...

  • Philips TDA8783 - page 21

    2002 Oct 23 21 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 APPLICA TION INFORMA TION Fig.16 Application diagram. Depending on the application, the following connections must be made: (1) The clamp level of the signal input at ADCIN can be tuned from code 00 to code 511 in 0.5 ...

  • Philips TDA8783 - page 22

    2002 Oct 23 22 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 P ower and grounding recommendations Care must be tak en to minimize noise when designing a printed-circuit board for applications such as PC cameras , sur veillance camer as, camcorders and digital still cameras. For ...

  • Philips TDA8783 - page 23

    2002 Oct 23 23 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 P A CKA GE OUTLINE UNIT A max. A 1 A 2 A 3 b p cE (1) eH E LL p Z y w v θ REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm 1.60 0.20 0.05 1.45 1.35 0.25 0.27 0.17 0.18 0.12 7.1 6.9 0.5 9.15 ...

  • Philips TDA8783 - page 24

    2002 Oct 23 24 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 SOLDERING Introduction to soldering surface mount pac kages This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our “Data Handbook IC26; Integrated C ...

  • Philips TDA8783 - page 25

    2002 Oct 23 25 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 Suitability of surface mount IC packa ges for wave and reflo w soldering methods Notes 1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note ” (AN01026); order a copy from you ...

  • Philips TDA8783 - page 26

    2002 Oct 23 26 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 D A T A SHEET ST A TUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since th ...

  • Philips TDA8783 - page 27

    2002 Oct 23 27 Philips Semiconductors Product specification 40 Msps, 10-bit analog-to-digital interf ace f or CCD cameras TD A8783 NOTES ...

  • Philips TDA8783 - page 28

    © Koninklijke Philips Electronics N.V. 2002 SCA74 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No ...

Manufacturer Philips Category Security Camera

Documents that we receive from a manufacturer of a Philips TDA8783 can be divided into several groups. They are, among others:
- Philips technical drawings
- TDA8783 manuals
- Philips product data sheets
- information booklets
- or energy labels Philips TDA8783
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips TDA8783.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips TDA8783, service manual, brief instructions and user manuals Philips TDA8783. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips TDA8783.

Similar manuals

A complete manual for the device Philips TDA8783, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips TDA8783 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips TDA8783.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips TDA8783 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips TDA8783, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips TDA8783, that we can find in the current document
3. Tips how to use the basic functions of the device Philips TDA8783 - which should help us in our first steps of using Philips TDA8783
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips TDA8783
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips TDA8783 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips TDA8783?

Use the form below

If you did not solve your problem by using a manual Philips TDA8783, ask a question using the form below. If a user had a similar problem with Philips TDA8783 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)