English dropdown-ico

Manual Jonsered CS 2139T

36 pages 1.79 mb
Download

Go to site of 36

Summary
  • Jonsered CS 2139T - page 1

    CS 2139T Oper ator ′ s manual Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine . ...

  • Jonsered CS 2139T - page 2

    2 – English KEY T O SYMBOLS Symbols on the mac hine: W ARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine . Alwa ys wear: • Approv ed protective helme ...

  • Jonsered CS 2139T - page 3

    English – 3 CONTENTS Contents KEY T O SYMBOLS Symbols on the machine: .............................................. 2 Symbols in the operator’ s manual: ................................ 2 CONTENTS Contents ....................................................................... 3 INTR ODUCTION Dear Customer , ................................... ...

  • Jonsered CS 2139T - page 4

    4 – English INTR ODUCTION Dear Customer , Cong ratulations on y our choice to buy a Jonsered product! W e are convinced that you will appreciate with g reat satisfaction the quality and perf or mance of our product for a v er y long time to come. The purchase of one of our products gives you access to prof essional help with repairs and ser vice ...

  • Jonsered CS 2139T - page 5

    English – 5 WHA T IS WHA T? What is what on the c hain saw? 1 Filter cov er 2 F ront handle 3 F ront hand guard 4 Star ter 5 Chain oil tank 6 Star ter handle 7 Adjuster screws carb urettor 8 Stop and choke control: Ignition on/off switch Chok e control/Star t throttle lock Working position 9 Rear handle 10 Spark plug cap 11 Fuel tank 12 Muffler ...

  • Jonsered CS 2139T - page 6

    6 – English GENERAL SAFETY PRECA UTIONS Bef ore using a new c hain saw • Please read this manual carefully . • Check that the cutting equipment is correctly fitted and adjusted. See instr uctions under the heading Assembly . • Refuel and star t the chain saw . See the instr uctions under the headings Fuel Handling and Star ting and Stoppin ...

  • Jonsered CS 2139T - page 7

    English – 7 GENERAL SAFETY PRECA UTIONS chain sa w usage if possible . Y our dealer , forestry school or your libr ar y can provide inf or mation about which training materials and courses are av ailable. Work is constantly in progress to impro ve the design and technology - improv ements that increase your saf ety and efficiency . Visit your de ...

  • Jonsered CS 2139T - page 8

    8 – English GENERAL SAFETY PRECA UTIONS • This mov ement activates a spring-loaded mechanism that tightens the brak e band (C) around the engine dr ive system (D) (clutch drum). • The front hand guard is not designed solely to activate the chain brak e. Another impor tant feature is that it reduces the risk of your left hand hitting the chain ...

  • Jonsered CS 2139T - page 9

    English – 9 GENERAL SAFETY PRECA UTIONS Will m y inetria activated c hain brake alwa ys activ ate during kickbac k in the event of a kic kbac k? No . First your brak e must be in working order . Second the kickbac k must be strong enough to activ ate the chain brake . If the chain brak e is too sensitive it would activ ate all the time which woul ...

  • Jonsered CS 2139T - page 10

    10 – English GENERAL SAFETY PRECA UTIONS Muffler The muffler is designed to k eep noise lev els to a minimum and to direct e xhaust fumes awa y from the user. In areas with a hot, dr y climate there is a high risk of fires. These areas are sometimes subject to gov er nment rules requiring among other things the muffler must be equipped with a ...

  • Jonsered CS 2139T - page 11

    English – 11 GENERAL SAFETY PRECA UTIONS Some terms that describe the bar and chain T o maintain the safety f eatures of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Jonsered. See instructions under the heading T echnical Data for a list of replacement bar and chain comb ...

  • Jonsered CS 2139T - page 12

    12 – English GENERAL SAFETY PRECA UTIONS It is v er y difficult to shar pen a chain correctly without the r ight equipment. W e recommend that you use our file gauge. This will help you obtain the maxim um kickback reduction and cutting perf or mance from your chain. See instructions under the heading T echnical data for inf or mation about sha ...

  • Jonsered CS 2139T - page 13

    English – 13 GENERAL SAFETY PRECA UTIONS T ension the chain as tightly as possible , but not so tight that you cannot pull it round freely b y hand. • Undo the bar nuts that hold the clutch cov er/chain brake. Use the combination spanner . Then tighten the bar nuts by hand as tight as y ou can. • Raise the tip of the bar and stretch the chain ...

  • Jonsered CS 2139T - page 14

    14 – English GENERAL SAFETY PRECA UTIONS • Check that the g roove in the edge of the bar is clean. Clean if necessar y . • Check that the bar tip sproc ket turns freely and that the lubricating hole in the tip sprocket is not b lock ed. Clean and lubricate if necessar y . If the chain lubrication system is still not working after carr ying ou ...

  • Jonsered CS 2139T - page 15

    English – 15 ASSEMBL Y Fitting the bar and c hain Check that the chain br ake is in disengaged position b y moving the front hand guard to wards the front handle. Remov e the bar nuts and remov e the clutch cov er (chain brak e). T ak e off the transpor tation ring (A). Fit the bar ov er the bar bolts. Place the bar in its rear most position. Pla ...

  • Jonsered CS 2139T - page 16

    16 – English FUEL HANDLING Fuel Note! The machine is equipped with a two-strok e engine and must alwa ys be r un using a mixture of petrol and two-stroke oil. It is impor tant to accurately measure the amount of oil to be mix ed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, e ven small inaccuracies can drastic ...

  • Jonsered CS 2139T - page 17

    English – 17 FUEL HANDLING Fuelling Clean the area around the fuel cap . Clean the fuel and chain oil tanks regularly . The fuel filter must be replaced at least once a year . Contamination in the tanks causes malfunction. Make sure the fuel is w ell mixed b y shaking the container bef ore refuelling. The capacities of the chain oil tank and fue ...

  • Jonsered CS 2139T - page 18

    18 – English ST AR TING AND ST OPPING Starting and stopping Cold engine Starting: The chain brake m ust be engaged when the chain saw is started. Activate the br ake by mo ving the front hand guard f orwards. Ignition; choke: Slide the control to its rear position. Primer b ulb: Press the air purge repeatedly until fuel begins to fill the bulb . ...

  • Jonsered CS 2139T - page 19

    English – 19 ST AR TING AND ST OPPING • Ne ver star t a chain saw unless the bar , chain and all cov ers are fitted correctly . See instructions under the heading Assembly . Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injur y . • The chain brak e should be activated when star ting. Se instruc ...

  • Jonsered CS 2139T - page 20

    20 – English W ORKING TECHNIQ UES Bef ore use: 1 Check that the chain br ake works correctly and is not damaged. 2 Check that the throttle loc kout works correctly and is not damaged. 3 Check that the stop s witch wor ks correctly and is not damaged. 4 Check that all handles are free from oil. 5 Check that the anti vibr ation system works and is ...

  • Jonsered CS 2139T - page 21

    English – 21 W ORKING TECHNIQ UES 7 T ake great care when cutting a tree that is in tension. A tree that is in tension ma y spr ing back to its normal position bef ore or after being cut. If you position y ourself incorrectly or make the cut in the wrong place the tree ma y hit you or the machine and cause y ou to lose control. Both situations ca ...

  • Jonsered CS 2139T - page 22

    22 – English W ORKING TECHNIQ UES 8 T ake great care when y ou cut with the top edge of the bar , i.e. when cutting from the underside of the object. This is known as cutting on the push strok e. The chain tries to push the chain saw bac k towards the user . If the saw chain is jamming, the saw ma y be pushed back at you. 9 Unless the user resist ...

  • Jonsered CS 2139T - page 23

    English – 23 W ORKING TECHNIQ UES Cutting The log is lying on the gr ound . There is little r isk of the chain jamming or the object splitting. Howe ver there is a risk that the chain will touch the ground when y ou finish the cut. Cut all the wa y through the log from abov e. A void letting the chain touch the ground as y ou finish the cut. Ma ...

  • Jonsered CS 2139T - page 24

    24 – English W ORKING TECHNIQ UES Once you ha ve decided which w ay y ou want the top of the tree to f all you must assess which w ay the top of the tree would f all naturally . Se veral f actors affect this: • Lean of the tree • Bend • Wind direction • Arrangement of branches • W eight of snow Y ou ma y find you are f orced to let the ...

  • Jonsered CS 2139T - page 25

    English – 25 W ORKING TECHNIQ UES Finish the f elling cut parallel with the directional cut line so that the distance between them is at least 1/10 of the trunk diameter . The uncut section of the trunk is called the felling hinge. The f elling hinge controls the direction that the tree falls in. All control ov er the felling direction is lost if ...

  • Jonsered CS 2139T - page 26

    26 – English W ORKING TECHNIQ UES How to a void kic kback What is kic kback? The word kic kback is used to describe the sudden reaction that causes the chain saw and bar to jump off an object when the upper quadrant of the tip of the bar , known as the kickbac k zone , touches an object. Kickbac k alwa ys occurs in the cutting plane of the bar . ...

  • Jonsered CS 2139T - page 27

    English – 27 MAINTENANCE General The user must only carry out the maintenance and ser vice work described in this manual. Carb urettor adjustment Due to e xisting environmental and emissions legislation y our chain saw is equipped with mo vement limiters on the carburettor adjuster scre ws. These limit the adjustment possibilities to a maximum of ...

  • Jonsered CS 2139T - page 28

    28 – English MAINTENANCE Correctly adjusted carb urettor When the carb urettor is correctly adjusted the machine accelerates without hesitation and 4-cycles a little at full throttle. It is also impor tant that the chain does not rotate at idle. If the L-jet is set too lean it ma y cause star ting difficulties and poor acceleration. If the H-jet ...

  • Jonsered CS 2139T - page 29

    English – 29 MAINTENANCE • Star t the chain saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationar y . If the chain rotates when the throttle control is in the idle position you should chec k the carburettor idle adjustment. Chain catcher Check that the chain catcher is not damaged and is ...

  • Jonsered CS 2139T - page 30

    30 – English MAINTENANCE Starter Changing a br oken or worn starter cord • Loosen the screws that hold the starter against the crankcase and remov e the star ter . • Pull out the cord appro x. 30 cm and hook it into the notch in the rim of the pulley . Release the recoil spring by letting the pulley rotate slo wly backwards . • Undo the scr ...

  • Jonsered CS 2139T - page 31

    English – 31 MAINTENANCE Air filter The air filter must be regularly cleaned to remov e dust and dir t in order to av oid: • Carburettor malfunctions • Star ting problems • Loss of engine power • Unnecessar y wear to engine par ts. • Excessive fuel consumption. • Remov e the air filter after taking off the air filter cov er . When ...

  • Jonsered CS 2139T - page 32

    32 – English MAINTENANCE Adjustment of the oil pump The oil pump is adjustab le. Adjustments are made by turning the screw using a scre wdriver or combination spanner . The machine is supplied from the f actor y with the screw set to position 2. T ur ning the screw cloc kwise will reduce the oil flow and turning the screw anti-clockwise will inc ...

  • Jonsered CS 2139T - page 33

    English – 33 MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf ormed on the machine. Most of the items are descr ibed in the Maintenance section. Daily maintenance W eekly maintenance Monthly maintenance Clean the outside of the machine . On chain saws without a catalytic conv er ter , check the cooli ...

  • Jonsered CS 2139T - page 34

    34 – English TECHNICAL D A T A ´®z+Rvh¶6|¨ ´®z+Rvh¶6|¨ T ec hnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conformity with EC directive 2000/14/EC . Note 2: Equivalent sound pressure le vel, according to ISO 7182, is calculated as the time-weighted energy total f or noise press ure le vels under ...

  • Jonsered CS 2139T - page 35

    English – 35 TECHNICAL D A T A Bar and chain combinations The f ollowing recommended combinations of bar and saw chain are type appro ved f or your chain saw . The saw chain Jonsered H36 is designed to minimize kic kback (classified sa w chain of low kickbac k type according to ANSI B175.1). Saw c hain filing and file gauges EC-dec laration of ...

  • Jonsered CS 2139T - page 36

    ´®z+Rvh¶6|¨ 2007-05-11 ´®z+Rvh¶6|¨ 1150867-26 ...

Manufacturer Jonsered Category Chainsaw

Documents that we receive from a manufacturer of a Jonsered CS 2139T can be divided into several groups. They are, among others:
- Jonsered technical drawings
- CS 2139T manuals
- Jonsered product data sheets
- information booklets
- or energy labels Jonsered CS 2139T
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jonsered CS 2139T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jonsered CS 2139T, service manual, brief instructions and user manuals Jonsered CS 2139T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jonsered CS 2139T.

Similar manuals

A complete manual for the device Jonsered CS 2139T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jonsered CS 2139T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jonsered CS 2139T.

A complete Jonsered manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jonsered CS 2139T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jonsered CS 2139T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jonsered CS 2139T, that we can find in the current document
3. Tips how to use the basic functions of the device Jonsered CS 2139T - which should help us in our first steps of using Jonsered CS 2139T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jonsered CS 2139T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jonsered CS 2139T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jonsered CS 2139T?

Use the form below

If you did not solve your problem by using a manual Jonsered CS 2139T, ask a question using the form below. If a user had a similar problem with Jonsered CS 2139T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)