Manual DeVillbiss Air Power Company 38301-9615

12 pages 0.14 mb
Download

Go to site of 12

Summary
  • DeVillbiss Air Power Company 38301-9615 - page 1

    DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 MG2-OFTANK-4A REV. 9/23/99 SAFETY GUIDELINES ...................................................... 1 WARRANTY STATEMENT .............................................. 2 WARNING CHART ........................................................ 3-4 GLOSSARY ................ ...

  • DeVillbiss Air Power Company 38301-9615 - page 2

    2 — ENG LIMITED WARRANTY ONE YEAR FROM DA TE OF PURCHASE All merchandise manufactured by DeVilbiss Air Power Company/ExCell Manufacturing is warranted to be free of defects in workmanship and material which occur during the first year from the date of purchase by the original purchaser (initial user). Products covered under this warranty include: ...

  • DeVillbiss Air Power Company 38301-9615 - page 3

    3 — ENG RISK OF BURSTING RISK OF EXPLOSION OR FIRE RISK OF ELECTRICAL SHOCK AIR TANK THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE TANK, AND RESULT IN A VIOLENT TANK EXPLOSION: 1. FAILURE TO PROPERLY DRAIN CONDENSED WATER FROM THE TANK, CAUSING RUST AND THINNING OF THE STEEL TANK. 2. MODIFICATIONS OR ATTEMPTED REPAIRS TO THE TANK. 3. ...

  • DeVillbiss Air Power Company 38301-9615 - page 4

    4 — ENG HAZARD RISK OF ELECTRICAL SHOCK (cont’d) RISK FROM FLYING OBJECTS RISK TO BREATHING RISK OF FALLING RISK FROM MOVING PARTS RISK OF BURNS WHAT CAN HAPPEN REPAIRS ATTEMPTED BY UNQUALIFIED PERSONNEL CAN RESULT IN SERIOUS INJURY OR DEATH BY ELECTROCUTION. ELECTRICAL GROUNDING: FAILURE TO PROVIDE ADEQUATE GROUNDING TO THIS PRODUCT COULD RESU ...

  • DeVillbiss Air Power Company 38301-9615 - page 5

    5 — ENG DAMAGE: Each air compressor outfit is carefully tested and checked before shipment. With improper handling, damage may result in transit and cause problems in compressor opera- tion. Immediately upon arrival, check equipment for both concealed and visible damages to avoid expenses being incurred to correct such problems. This should be do ...

  • DeVillbiss Air Power Company 38301-9615 - page 6

    6 — ENG Drain Valve: The drain valve is located at the base of the air tank and is used to drain condensation at the end of each use. Motor Thermal Overload Protector: The electric motor has an automatic thermal overload protector. If the motor over- heats for any reason, the thermal overload protector will shut off the motor. The motor must be a ...

  • DeVillbiss Air Power Company 38301-9615 - page 7

    7 — ENG Location of the Air Compressor Locate the air compressor in a clean, dry and well ventilated area. The air filter must be kept clear of obstructions which could reduce air flow to the air compressor. The air compres- sor should be located at least 12" away from the wall or other obstructions that will interfere with the flow of air. ...

  • DeVillbiss Air Power Company 38301-9615 - page 8

    8 — ENG Additional Regulators and Controls Since the air tank pressure is usually greater than that which is needed, a separate regulator is usually employed to control the air pressure ahead of any individual air driven device. Break-in Procedures Serious damage may result if the following break- in instructions are not closely followed. This pr ...

  • DeVillbiss Air Power Company 38301-9615 - page 9

    9 — ENG WATER WILL CONDENSE IN THE AIR TANK. IF NOT DRAINED, WATER WILL CORRODE AND WEAKEN THE AIR TANK CAUSING A RISK OF AIR TANK RUP- TURE. 1 1. After the water has been drained, close the drain cock or drain valve. The air compressor can now be stored. NOTE If drain cock valve is plugged, release all air pressure. The valve can then be removed ...

  • DeVillbiss Air Power Company 38301-9615 - page 10

    10 — ENG PROBLEM CAUSE Move the pressure switch lever to the “OFF” position. If the outfit doesn’t shut off, unplug. If the electrical contacts are welded together, replace the pressure switch. Contact an authorized service center to check and replace pressure switch. Tighten fittings where air can be heard escaping. Check fittings with soa ...

  • DeVillbiss Air Power Company 38301-9615 - page 11

    11 — ENG PROBLEM CAUSE CORRECTION Prolonged excessive use of air. Compressor is not large enough for air requirement. Restricted air intake filter. Hole in hose. Check valve restricted. Air leaks. Motor overload protection switch has tripped. Tank pressure exceeds pressure switch “cut-in” pressure. Wrong gauge wire or length of exten- sion co ...

  • DeVillbiss Air Power Company 38301-9615 - page 12

    DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 GENERAL MANUAL FOR PERMANENTL Y LUBRICA TED POR T ABLE/ST A TIONAR Y AIR COMPRESSOR SERVICE NOTES ...

Manufacturer DeVillbiss Air Power Company Category Air Compressor

Documents that we receive from a manufacturer of a DeVillbiss Air Power Company 38301-9615 can be divided into several groups. They are, among others:
- DeVillbiss Air Power Company technical drawings
- 38301-9615 manuals
- DeVillbiss Air Power Company product data sheets
- information booklets
- or energy labels DeVillbiss Air Power Company 38301-9615
All of them are important, but the most important information from the point of view of use of the device are in the user manual DeVillbiss Air Power Company 38301-9615.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals DeVillbiss Air Power Company 38301-9615, service manual, brief instructions and user manuals DeVillbiss Air Power Company 38301-9615. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product DeVillbiss Air Power Company 38301-9615.

A complete manual for the device DeVillbiss Air Power Company 38301-9615, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use DeVillbiss Air Power Company 38301-9615 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of DeVillbiss Air Power Company 38301-9615.

A complete DeVillbiss Air Power Company manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual DeVillbiss Air Power Company 38301-9615 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the DeVillbiss Air Power Company 38301-9615, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the DeVillbiss Air Power Company 38301-9615, that we can find in the current document
3. Tips how to use the basic functions of the device DeVillbiss Air Power Company 38301-9615 - which should help us in our first steps of using DeVillbiss Air Power Company 38301-9615
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with DeVillbiss Air Power Company 38301-9615
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of DeVillbiss Air Power Company 38301-9615 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning DeVillbiss Air Power Company 38301-9615?

Use the form below

If you did not solve your problem by using a manual DeVillbiss Air Power Company 38301-9615, ask a question using the form below. If a user had a similar problem with DeVillbiss Air Power Company 38301-9615 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)