English dropdown-ico

Manual Fujitsu Siemens Computers S7110

31 pages 0.25 mb
Download

Go to site of 31

Summary
  • Fujitsu Siemens Computers S7110 - page 1

    1 Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model: S7110 (V ista OS) Document Date: 03/30 /2007 Document Number: FPC58-16 47-01 FUJITSU COMPUTER SYSTEMS CORPORA TION ...

  • Fujitsu Siemens Computers S7110 - page 2

    2 LifeBook S Series Notebook BIOS S Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating en vironment for y our notebook. Y our BIOS is set at the factor y for normal operating conditions, therefor e there should be no need to set or change the BIOS enviro nment to operate your not ebook. The BIOS Setup Util ...

  • Fujitsu Siemens Computers S7110 - page 3

    3 settings of the setup ut ility , as descr ibed in the fol lowing steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1> key to continue, <F2> to run SETUP 2. If an error message is displa yed on the screen, and you want ...

  • Fujitsu Siemens Computers S7110 - page 4

    4 LifeBook S Series Notebook BIOS MAIN MENU – SETTING ST AN DARD SYSTEM P ARAMETERS The Main M enu allows y o u to set or view the current system parameters. (See N avigat ing through the Setup Utility on page 2 for more i nformation) The following tables sho w the names of the men u fields for the Main menu and its submenu s, all of the options ...

  • Fujitsu Siemens Computers S7110 - page 5

    5 Drive0 Selects the Drive0 Serial A T A drive submenu The product number of the hard drive. Display the type of device on this A T A/IDE interface. Pressing the Enter key selects the Serial A T A Drive0 submenu allowing a dditional device configuration options for this interface. Drive1: Selects the Drive1 Serial A T A drive submenu The product nu ...

  • Fujitsu Siemens Computers S7110 - page 6

    6 LifeBook S Series Notebook BIOS Drive0 Submenu of th e Main Menu The Drive0 s ubmenu identifies what Se rial A T A/IDE devices are installed. No te that actual hard dr ive label shown may vary . Depending on the driv e ty pe, information such as cylin- ders, heads and sectors may also be d isplayed. Figure 2. Drive0 Submenu T able 3: Fields, Opti ...

  • Fujitsu Siemens Computers S7110 - page 7

    7 Drive1 Submenu of the Main Menu The Drive1 submenu allows y ou to configure sec ondar y ATA d e v i c e s . N ote that actual optica l drive label s hown may va r y . Depending on the drive type, information such as cylin- ders, heads and sectors may also be displa yed. Figure 4. Drive1 Submenu T able 4: Fields, Options and Defaults fo r the Driv ...

  • Fujitsu Siemens Computers S7110 - page 8

    8 LifeBook S Series Notebook BIOS Exiting from Main Menu W hen you ha ve finished setting the para meters on this menu, y ou can either exit from the setup utilit y , or move t o another menu. If y ou w ish to exit from the setup utility , pr ess the [Esc] key or use the cursor keys to go to the Exit menu or to mov e to another menu. T ransfer Mode ...

  • Fujitsu Siemens Computers S7110 - page 9

    9 ADV ANCED MENU – SETTING DEVICE FEA T URE CONTROLS The Ad vanced M enu allows you to: ■ Set the I/O addresses for the ser ial and parallel por ts when a port replicator is used. ■ Set the features of the keyboard/mouse. ■ Select between the display panel and/or an e x ternal CR T display . ■ Set internal device configurations ■ Config ...

  • Fujitsu Siemens Computers S7110 - page 10

    10 LifeBook S Series Notebook BIOS Internal Device Configurations When selected, opens the Internal Device Configurat ion submenu , which allows enab ling or disabling the modem, IDE, and LAN Controllers. CPU Features When selected, opens the CP U Features submenu, which allows you to change the Intel(R) SpeedStep(R) T echnology settings. USB Featu ...

  • Fujitsu Siemens Computers S7110 - page 11

    11 Serial/Parallel Port Configu ration Submenu of the Advanced Menu The Serial/P ar allel P or t Configuration submenu lets you set the I/O addresses and interr upt levels for the serial, infrared and parallel port s of your notebook. Figure 6. Serial/P arallel Port Configurati on Submenu I/O addresses, DMA channels and Interrupt levels can be ente ...

  • Fujitsu Siemens Computers S7110 - page 12

    12 LifeBook S Series Notebook BIOS T able 6: Fields, Options and Defaults for the Serial/Parallel Port Conf ig uration Submenu of Advanced Menu Menu Field Options Default Description Serial Port: ■ Disabled ■ Enabled ■ Auto [Enabled] Configures the serial p ort using either no configuration ( Disabled), a user defined configuration (Enabled ) ...

  • Fujitsu Siemens Computers S7110 - page 13

    13 Keyboard/Mo use Features Submenu of the Advanced Menu The K eyboard/Mouse F eatures submen u is for setting the paramet ers of the int egrated and external mouse and ke y bo a rd . Figure 7. Keyboard/Mouse Features Submenu T able 7: Fields, Options and De faults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Options Default Descr ...

  • Fujitsu Siemens Computers S7110 - page 14

    14 LifeBook S Series Notebook BIOS Vid eo Features Submenu of the Advanced Menu The V ideo Features S ubmenu is for setting the display paramet ers. Figure 8. Video Features Submenu T able 8: Fields, Options and Defaults for th e Video Features Submenu of the Advanced Me nu Menu Field Options Default Des criptio n Display: ■ Internal Flat Panel ? ...

  • Fujitsu Siemens Computers S7110 - page 15

    15 Internal Device Configurat ions Submenu of the Advanced Menu The Internal Device Configuration submenu allo ws the user to configure other internal devices. Figure 9. I nternal Device C onfiguration Sub menu T able 9: Fields, Options and Defaul ts for the Internal Device Config uration Submenu of the Advanced Menu Menu Field Options Default Desc ...

  • Fujitsu Siemens Computers S7110 - page 16

    16 LifeBook S Series Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Featur es Submenu allo ws you to change the setting s for In tel(R) SpeedStep(R) T echnolog y for your system. Figure 10. CPU Features Submenu T able 10: Fields, Options and Defaults for th e CPU Features Submenu of the Advanced Menu Menu Field Options Default Desc ...

  • Fujitsu Siemens Computers S7110 - page 17

    17 XD Bit functionality: ■ Enabled] ■ Disabled [Enable d] Allows the user to enable a nd disable the Execute Disable Bit functionality . Execute Disa ble Bit allows the processor to classify areas i n memory where application code can and cannot execute. In the event an internet worm attempts to inse rt code in the buffer , the processor disabl ...

  • Fujitsu Siemens Computers S7110 - page 18

    18 LifeBook S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Featur es Submenu enables and disabl es legacy USB suppor t for your system. Figure 11. USB Features Submenu T able 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Default Description Legacy USB Support: ■ Dis ...

  • Fujitsu Siemens Computers S7110 - page 19

    19 Miscellaneous Configuratio ns Submenu of the Advanced Menu The Misc ellaneous Configurations Submenu c onfigur es the misc ellaneous features for your system. Figure 12. Miscellaneous Configurati ons Submenu T able 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Options Default Description Power Button: ? ...

  • Fujitsu Siemens Computers S7110 - page 20

    20 LifeBook S Series Notebook BIOS UMA Video Memory Size: ■ 64MB ■ 128MB ■ 224MB [128MB] Allows you t o select the maxi mum shar ed video memory size. Video memory is dynamically a llocated as needed for running applications by Dynamic Video Memory T echnology (DVMT). Hardware P ower Management: ■ Disabled ■ Enabled [Enabled] Enables or d ...

  • Fujitsu Siemens Computers S7110 - page 21

    21 Event Logging Sub menu of the Advanced Menu The E vent L o gging Submen u configur es event logging featur es for DMI events. Figure 13. Event Logging Submenu T able 13: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Capacity: Space Available Display only . Event L ...

  • Fujitsu Siemens Computers S7110 - page 22

    22 LifeBook S Series Notebook BIOS SECURITY MENU – SETTING THE SECURITY FEA TURES The Security menu allows you to set up the data security features of your not ebook to fit your operating needs and to view the current data securi ty configuration. (See Navi- gating through the Setup U t ility on page 2 fo r more in for- mation) The following tabl ...

  • Fujitsu Siemens Computers S7110 - page 23

    23 T able 14: Fields, Options and De faults for the Security Menu Menu Field Options Default Description Supervisor Password is: –— Clear A display-only field. Set is di splayed when the s ystem Supervisor Password is set and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed w hen the general User Passw ...

  • Fujitsu Siemens Computers S7110 - page 24

    24 LifeBook S Series Notebook BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Secur ity submenu is for co nfiguring hard disk security features. Figure 15. Hard Disk Security Submenu T able 15: Fields, Options and De faults for the Hard Disk Secur ity Submenu of the Security Menu Menu Field Options Default Descripti on Drive0: __ ...

  • Fujitsu Siemens Computers S7110 - page 25

    25 Set User Password: ___ [Enter] Sets, changes or cancel s the Drive1 USer Password. Th e Drive1 User Password may be up to seven ch aracters long and must inc lude only letters or numbers (no sym- bols). Passwords are NOT case-sensitive. When a Drive1 User Password is set, it must be used to access the modular har d dri ve if i t is used in anoth ...

  • Fujitsu Siemens Computers S7110 - page 26

    26 LifeBook S Series Notebook BIOS Owner Informatio n Submenu of the Securi ty Menu The Owner Information S ubmenu is f or setting owner info rmation. Note that Owner Information cann ot be set without having entered a super visor’s passw ord. Figure 16. Owner Information Submenu T able 16: Fields, Options and Defaults for the Owner Information S ...

  • Fujitsu Siemens Computers S7110 - page 27

    27 Security Chip Setting Submenu of the Security Menu The Security Chip Se tting submenu is used to enable or disabled the embedded security chip. Figure 17. Security Chip Setting Subme nu Exiting from the Security Menu W hen you ha ve finished setting the parameters on the Security Me nu, yo u can either exit fr om setup utility or move to another ...

  • Fujitsu Siemens Computers S7110 - page 28

    28 LifeBook S Series Notebook BIOS BOOT MENU – SELECTING THE OPERA T ING SYSTEM SOURCE The Boot Me nu is used to select the order in which the BIOS searches sourc es for the operating system. (See Na v igating through the Setup Utility on page 2 f or more information) The following tables show the names of the menu fields for the Boot menu and it ...

  • Fujitsu Siemens Computers S7110 - page 29

    29 Boot Device Priority Submenu of the Boot Menu The Boot Dev ice Priorit y submenu is for set ting the order of checking of sources for the operating system. Figure 19. Bo ot Device Priorit y Submenu Exiting from Boot Menu W hen you hav e finished setting th e boot parameters with the Boot M enu, you can either exit from the setup utility or move ...

  • Fujitsu Siemens Computers S7110 - page 30

    30 LifeBook S Series Notebook BIOS INFO MENU – DISPL A YS BA SIC SYSTEM INFORMA TION The Info menu is a display only scr eens that provides the configuration i nformation for y our notebook. The following table shows the names of the menu fields for the Info men u and the information displayed in those fields. These fields ar e for information pu ...

  • Fujitsu Siemens Computers S7110 - page 31

    31 EXIT MENU – LEA VIN G THE SETUP UTILITY The Exit M enu is used to leav e the setup utility . (See Na vigat ing through the Setup Utility on page 2 for more informa - tion ) . The following table shows the names of the menu fields for the E xit menu, the default settings and a description of the field's function and any special information ...

Manufacturer Fujitsu Siemens Computers Category Laptop

Documents that we receive from a manufacturer of a Fujitsu Siemens Computers S7110 can be divided into several groups. They are, among others:
- Fujitsu Siemens Computers technical drawings
- S7110 manuals
- Fujitsu Siemens Computers product data sheets
- information booklets
- or energy labels Fujitsu Siemens Computers S7110
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fujitsu Siemens Computers S7110.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fujitsu Siemens Computers S7110, service manual, brief instructions and user manuals Fujitsu Siemens Computers S7110. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fujitsu Siemens Computers S7110.

Similar manuals

A complete manual for the device Fujitsu Siemens Computers S7110, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fujitsu Siemens Computers S7110 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fujitsu Siemens Computers S7110.

A complete Fujitsu Siemens Computers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fujitsu Siemens Computers S7110 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fujitsu Siemens Computers S7110, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fujitsu Siemens Computers S7110, that we can find in the current document
3. Tips how to use the basic functions of the device Fujitsu Siemens Computers S7110 - which should help us in our first steps of using Fujitsu Siemens Computers S7110
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fujitsu Siemens Computers S7110
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fujitsu Siemens Computers S7110 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fujitsu Siemens Computers S7110?

Use the form below

If you did not solve your problem by using a manual Fujitsu Siemens Computers S7110, ask a question using the form below. If a user had a similar problem with Fujitsu Siemens Computers S7110 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)