English dropdown-ico

Manual HydroSurge 400A-60

11 pages 0.43 mb
Download

Go to site of 11

Summary
  • HydroSurge 400A-60 - page 1

    MORSE Mfg. Co., Inc. • 727 W est Manlius S treet • P .O. Box 518 • East Syracuse, NY 13057-0518 Phone: (315) 437-8475 • Fax: (315) 437-1029 • Email: service@MORSEmfgco.com • W ebsite: www .MORSEmfgco.com Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 1 The Specialist In Drum Handling Equipment MOD ...

  • HydroSurge 400A-60 - page 2

    Safety Information (continued) DANGER - Indicates a situation which, if not avoided, will result in serious injury or death. This signal word is limited to the most extreme situations. W ARNING - Indicates a situation which, if not avoided, could result in serious injury or death. CAUTION - Indicates a situation which, if not avoided, can result in ...

  • HydroSurge 400A-60 - page 3

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 3 Machine Description The Model 400A-60 Hydra-Lift Karrier will pour a drum up to 60” high, measured from the floor to the lowest point of a horizontal drum. It is designed to lif t, transport, and dispense a ribbed 55-gallon steel drum 22.5” in diameter . ? ...

  • HydroSurge 400A-60 - page 4

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 4 W ARNING - W atch Out for Pinch Point s S t ay clear of moving p art s. Operator should remain behind the push handle during the lif t operation. Floor Lock The screw-down floor lock is located on the base of the tower (figure 3.1). T urning the floor lock cloc ...

  • HydroSurge 400A-60 - page 5

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 5 Assembly Instructions for Morse Hydra-Lif t Drum Karrier Model 400A-60 Serial Number 0604 to ____ (MMYY) S tep #1: Place tower on floor , push-handle down. See figure 1. S tep #2: Att ach each leg (item 4) using two 3/8-16x3” grade 5 bolt s (item 2), flat was ...

  • HydroSurge 400A-60 - page 6

    Operating Instructions 1.) Push the Hydra-Lift Karrier to the drum. 2.) Using the “LIFT” control as described in “ Machine Description - Controls ” (page 3) , position the drum holder assembly with the back band at the middle of the drum. (Figure 3.1). With the ratchet plate swung open and the cinch chain hanging from the chain hook, push t ...

  • HydroSurge 400A-60 - page 7

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 7 Maintenance Periodic inspection for the general condition of structural and mechanical components is imperative for safe and efficient operation. Periodically inspect all moving p art s, framework, and cont act areas for signs of wear , fatigue, or loosening. T ...

  • HydroSurge 400A-60 - page 8

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 8 Part s List for Morse Hydra-Lif t Drum Karrier Model 400A-60 Serial Number 0604 to ____ (MMYY) I TE M QTY . PART # D E SCR IP TI ON 11 791 - 60 - P OVE RH EA D AS M, 400A-6 0 2 4 15 21 -P H H C S, 3/ 8-1 6 X 3 GR 5 3 4 11 66 -P WA S HER , 3/ 8 USS 1" OD 4 ...

  • HydroSurge 400A-60 - page 9

    Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 9 Part s Diagram for Morse Hydra-Lif t Drum Karrier Model 400A-60 Serial Number 0604 to ____ (MMYY) The Specialist In Drum Handling Equipment MODEL 400A-60 Hydra-Lif t, 60”, Manual Lif t, Manual T ilt ...

  • HydroSurge 400A-60 - page 10

    Overhead Assembly (Part Number 791-60-P) for Morse Hydra-Lif t Drum Karrier Model 400A-60 Serial Number 0604 to ____ (MMYY) Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 10 The Specialist In Drum Handling Equipment MODEL 400A-60 Hydra-Lif t, 60”, Manual Lif t, Manual T ilt I TE M QTY . PAR T # DE S CR IP T ...

  • HydroSurge 400A-60 - page 11

    Overhead Assembly (Part Number 791-60-P) for Morse Hydra-Lif t Drum Karrier Model 400A-60 Serial Number 0604 to ____ (MMYY) Copyright 2007 - Morse Mfg. Co., Inc. Form PL400-60 (0604-____) (Updated 10/2007) Page 1 1 The Specialist In Drum Handling Equipment MODEL 400A-60 Hydra-Lif t, 60”, Manual Lif t, Manual T ilt ...

Manufacturer HydroSurge Category Water System

Documents that we receive from a manufacturer of a HydroSurge 400A-60 can be divided into several groups. They are, among others:
- HydroSurge technical drawings
- 400A-60 manuals
- HydroSurge product data sheets
- information booklets
- or energy labels HydroSurge 400A-60
All of them are important, but the most important information from the point of view of use of the device are in the user manual HydroSurge 400A-60.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HydroSurge 400A-60, service manual, brief instructions and user manuals HydroSurge 400A-60. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HydroSurge 400A-60.

Similar manuals

A complete manual for the device HydroSurge 400A-60, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HydroSurge 400A-60 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HydroSurge 400A-60.

A complete HydroSurge manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HydroSurge 400A-60 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HydroSurge 400A-60, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HydroSurge 400A-60, that we can find in the current document
3. Tips how to use the basic functions of the device HydroSurge 400A-60 - which should help us in our first steps of using HydroSurge 400A-60
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HydroSurge 400A-60
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HydroSurge 400A-60 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HydroSurge 400A-60?

Use the form below

If you did not solve your problem by using a manual HydroSurge 400A-60, ask a question using the form below. If a user had a similar problem with HydroSurge 400A-60 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)