English dropdown-ico

Manual Cisco Systems ONS 15600

14 pages 0.28 mb
Download

Go to site of 14

Summary
  • Cisco Systems ONS 15600 - page 1

    CH A P T E R 11-1 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 11 Change Card Settings This chapter e xplains ho w to change transmi ssion settings on cards in a Cisco ONS 15600. Before You Begin As necessary , complete th e “NTP-E57 Document Existing Pro visioning” pr ocedure on page 7-2 . Before performing the follo wing pr ocedures, i ...

  • Cisco Systems ONS 15600 - page 2

    11-2 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E157 Provision a Multir ate PPM NTP-E157 Provision a Multirate PPM Step 1 Complete the “DLP-E26 Log into CTC ” task on page 16 -39 to log into an ONS 15600 on th e network. Step 2 Click the Alarms tab: a. V erify that the alarm f ilter is not turned on. ...

  • Cisco Systems ONS 15600 - page 3

    11-3 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E151 Provision an Optical Line Rate NTP-E151 Provision an Optical Line Rate Step 1 Complete the “DLP-E26 Log into CTC ” task on page 16 -39 to log into an ONS 15600 on th e network. Step 2 Click the Alarms tab: a. V erify that the alarm f ilter is not t ...

  • Cisco Systems ONS 15600 - page 4

    11-4 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E150 Change th e Optical Line Rate Step 9 Click OK . The row on the Pluggable Ports pane turns light blue until the actual SFP is installed and then the row tu rns white. Stop. Y ou hav e completed this procedur e. NTP-E150 Change the Optical Line Rate Step ...

  • Cisco Systems ONS 15600 - page 5

    11-5 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E149 Delete Pluggable Port Modules NTP-E149 Delete Pluggable Port Modules Step 1 Complete the “DLP-E26 Log into CTC ” task on page 16 -39 to log into an ONS 15600 on th e network. Step 2 Click the Alarms tab: a. V erify that the alarm f ilter is not tur ...

  • Cisco Systems ONS 15600 - page 6

    11-6 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modify Line and Status T hresholds for Optical Ports Note If you need to remo ve the SFP , see the “DLP-E216 Remo ve an SFP” procedure o n page 18-15 . If you need to remo ve the 4PIO, see the “DLP-E217 Remov e a 4PIO Module” procedure on page 1 ...

  • Cisco Systems ONS 15600 - page 7

    11-7 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modi fy Line and Status Thresholds for Optical Ports SD BER Sets the signal de grade bit error rate • 1E-5 • 1E-6 • 1E-7 (default) • 1E-8 • 1E-9 Provides Sync Indicates th at the port has been provisio ned as a network element timing reference ...

  • Cisco Systems ONS 15600 - page 8

    11-8 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modify Line and Status T hresholds for Optical Ports Step 6 Click A pply . Service State Identif ies the autonomously generated state that gi ves the ov erall condition of the port. Service states appear in the format: Primar y State-Primary St ate Qual ...

  • Cisco Systems ONS 15600 - page 9

    11-9 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modi fy Line and Status Thresholds for Optical Ports Step 7 Click the Thresholds su btab . The def ault selection is Near End, 15 Min, and Line ( Fi gure 11-1 ). Figure 1 1 -1 Pro visioning Thresholds for the OC-48 Card Step 8 As needed, c omplete th e ...

  • Cisco Systems ONS 15600 - page 10

    11-10 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modify Line and Status T hresholds for Optical Ports T able 1 1 -3 OC-N Thr eshold Opti ons (Line, Section, and P ath) Heading Description Options Port Port number 1 – 16 for an OC-48 car d, 1 – 4 for an OC-192 card CV Coding violat ions Numeric. D ...

  • Cisco Systems ONS 15600 - page 11

    11-11 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E66 Modi fy Line and Status Thresholds for Optical Ports Step 9 As needed, c omplete th e following: a. Click Phys ical to provision th e physical options in T able 11-4 for each OC-N port. b. Change the se lection to 15 Min or 1 Day as nec essary . c. Cli ...

  • Cisco Systems ONS 15600 - page 12

    11-12 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E105 Change an Optical Port to SDH Step 10 Click A pply . Note See Chapter 7, “Man age Alarms, ” for information about the Alarm Beha vior tab, includ ing alarm prof iles and alarm suppression. Stop. Y ou hav e completed this procedur e. NTP-E105 Chang ...

  • Cisco Systems ONS 15600 - page 13

    11-13 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E125 Change Card Service State Step 6 Y ou can re peat Steps 4 and 5 for any other ports on that card. Stop. Y ou hav e completed this procedur e. NTP-E125 Change Card Service State Step 1 Complete the “DLP-E26 Log into CTC ” task on page 16 -39 at the ...

  • Cisco Systems ONS 15600 - page 14

    11-14 Cisco ONS 15600 Procedure Guide, R5.0 February 2008 Chapter 11 Change Card Settings NTP-E125 Change Ca rd Se rvice State Stop. Y ou hav e completed this procedur e. OOS,MT OOS-A U,AINS & UEQ (Out-of-Service and Au tonomous,Au to In-Service and U nequipped) OOS-A UMA,MT & UEQ (Out-of-Service and Autonomous Management,Maintenance and Un ...

Manufacturer Cisco Systems Category Computer Accessories

Documents that we receive from a manufacturer of a Cisco Systems ONS 15600 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- ONS 15600 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems ONS 15600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems ONS 15600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems ONS 15600, service manual, brief instructions and user manuals Cisco Systems ONS 15600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems ONS 15600.

Similar manuals

A complete manual for the device Cisco Systems ONS 15600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems ONS 15600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems ONS 15600.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems ONS 15600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems ONS 15600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems ONS 15600, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems ONS 15600 - which should help us in our first steps of using Cisco Systems ONS 15600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems ONS 15600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems ONS 15600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems ONS 15600?

Use the form below

If you did not solve your problem by using a manual Cisco Systems ONS 15600, ask a question using the form below. If a user had a similar problem with Cisco Systems ONS 15600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)