-
Primera Technology SE - page 1
080906-510963-(02) USER’S MANUAL For Macintosh and PC Automated Optical Disc Duplication & Printing System AUTOPRINTER TM Automated Optical Disc Duplication & Printing System © 2006 All rights reserved 510963.qxd 8/10/2006 12:36 PM Page i ...
-
Primera Technology SE - page 2
ii Notices : The information in this document is subject to change without notice. NO W ARRANTY OF ANY KIND IS MADE WITH REG ARD TO THIS MA TERIAL, INCL UDING, BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE. No liability is assumed for errors contained herein or for incidental or consequential ...
-
Primera Technology SE - page 3
T able of Contents Section 1: Getting Started ......................................................................................1 A. Choosing a Good Location ......................................................................1 B. Unpacking and Inspection.......................................................................2 C. Identifying t ...
-
Primera Technology SE - page 4
There are interactive features that will allow you to jump to different locations within the document. Each listing in the T able of Content s is interactive. Place the cursor on either the words or the p age number . A small hand with a pointing finger icon appears. Click on the line with the icon and the document will jump to that p age. If you w ...
-
Primera Technology SE - page 5
Getting Started 1 Section 1: Getting Started THANK Y OU… ...for purchasing the Bravo Disc Publisher SE. Bravo is the perfect all-in- one solution for producing professional looking CD -R and DVD-R discs. A wide variety of disc for mats are supported, including audio CDs, V ideo Cds, data discs and more. Operation is simple and completely automati ...
-
Primera Technology SE - page 6
2 Getting Started B. UNP ACKING AND INSPECTION While unpacking your Publisher , inspect the carton to ensure that no damage has occurred during shipping. Make sure that all supplied accessories are included with your unit. The following items should be included: • Disc Publisher • P ower Cord and Converter • One Three-Color (CMY) Ink Cartridg ...
-
Primera Technology SE - page 7
Getting Started 3 C. IDENTIFYING THE P ARTS F r ont Panel and T op This illustration shows the Publisher and its components. The Robotic Disc T ransporter moves discs from the Input Bin, to a CD/DVD Recorder , to the printer , and finally to the Output Bin. The CD/DVD R ecorder is automatically loaded and unloaded by the Publisher's Robotic Di ...
-
Primera Technology SE - page 8
4 Getting Started W ith the cover closed, the P ower/Ink Button tur ns the Publisher's power OFF if pressed and held for five seconds. Press it quickly to turn power back on. When already powered on quickly pressing the power button will open and close the printer tray . When the front cover is opened, the P ower/Ink Button is used to position ...
-
Primera Technology SE - page 9
Getting Started 5 D. PC SY STEM REQUIREMENTS Before getting started, it is important for you to verify that your PC meets the minimum system requirements. Here's what you need in order to successfully copy discs at 8x or above with the PTPublisher software: • 700 MHz or faster P entium III/IV processor r unning W indows 2000 or XP . • 512 ...
-
Primera Technology SE - page 10
6 Getting Started F . O VERVIEW OF OPERA TION Y our new Publisher is an automated, precision device intended for continuous-duty publishing of discs. The following is a description of the complete process of duplicating and printing a CD/DVD job on your P ublisher: 1. Up to 20 blank discs may be loaded at one time into the Input Bin. 2. The Publish ...
-
Primera Technology SE - page 11
Getting Started 7 7. Once recording has started on the next round, printing will start with the recorded disc from the previous round. This simultaneous printing and recording greatly increases the throughput of your Publisher . 8. Print time varies according to which print mode has been selected (Section 3-A). In most cases, print time tak es no m ...
-
Primera Technology SE - page 12
8 Hardware and Software Setup Section 2: Hardwar e and Softwar e Setup Setup This section will describe the step-by-step process of setting up your Publisher . This includes information on how to load the supplies (ink and disc media) necessary to start producing discs. A. INST ALLING THE PC SOFTWARE The Installer Disc has a menu that will guide yo ...
-
Primera Technology SE - page 13
Hardware and Software Setup 9 d. The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations. e. Once the installation has completed, click Quit . Y ou have successfully installed all the necessar y software! Section C below will describe how t ...
-
Primera Technology SE - page 14
10 Hardware and Software Setup Refer to the following steps when loading discs in to the Publisher: • Open the front cover of the Publisher • The Publisher will automatically position the cartridge carrier and Robotic Disc T ransporter to allow for easy access to the bin. • Load the Input Bin (the bin located on the right-hand side of the Pub ...
-
Primera Technology SE - page 15
Hardware and Software Setup 11 Step 3: Connecting the USB 2.0 Cable Connect the Publisher to your PC or Mac with your beige USB 2.0 Cable. If you are using a PC, after a few moments, W indows will tell you it has found new hardware and is looking for software to install it. Select " Install the software automatically " and click Next . Y ...
-
Primera Technology SE - page 16
12 Hardware and Software Setup When connecting USB to a Mac it may be necessary to A dd the printer via the Printer Setup Utility . 1. Open the Printer Setup Utility located in the Applications - Utilities folder . 2. Click Ad d . Select the Disc Publisher XRP from the list of available printers. Click Ad d again. 510963.qxd 8/10/2006 12:36 PM Page ...
-
Primera Technology SE - page 17
Hardware and Software Setup 13 Step 4: Installing the Ink Car tridge • W ith the cover open, press the P ower/Ink Button to move the Ink Cartridge Carrier to the load position. • Open the cartridge cover by pressing down on the tab. • Remove the ink cartridge from its packaging. • Slowly remove the tape covering the cartridge's print h ...
-
Primera Technology SE - page 18
14 Creating Discs on a PC Section 3: Cr eating Discs on a PC There are two main components to creating discs, printing and burning. SureThing CD Labeler is used to design the printing on your discs. PTPublisher controls the recording and allows you to select the image to be printed to your discs. Both applications will be described in detail in thi ...
-
Primera Technology SE - page 19
Creating Discs on a PC 15 3. The Publisher will close the drive and read the contents of the disc. It will display disc type (CD/DVD) and show the size of the disc in Megabytes. V erify this information is cor rect and click the next arrow to continue. 4. Select the print label file by clicking the select a label button. When you have selected prin ...
-
Primera Technology SE - page 20
16 Creating Discs on a PC 4A2 - Double Click on the file to add it to your project. Y ou may add any BMP , JPG or SureThing (.std) file. SureThing files are automatically formated cor rectly . BMP or JPG files should be 4.72" x 4.72" square. F or best print quality the image resolution should be atleast 300 dpi. Use the tabs on the bottom ...
-
Primera Technology SE - page 21
Creating Discs on a PC 17 Choose the 120mm DiscT emplate from the window that appears. Using the buttons on the left navigation window , you may add your own background, choose a pre-made back- ground, choose from several text effects or insert a picture. Click the down arrow on the button to view all options. Once you have designed the label go to ...
-
Primera Technology SE - page 22
18 Creating Discs on a PC 5. Y ou can edit the print settings for this file by changing the settings that appear . Several preset media types that correspond with the media availabe at our webstore are available from the Media drop down box. When you select a media type from this box the P rint Quality , Outer Margin and Inner Diameter are automati ...
-
Primera Technology SE - page 23
Creating Discs on a PC 19 B. USING PTPUBLISHER The PTPublisher program is divided into six areas. Refer to the following for a description of each area. 1. Open Project Panel This panel allows you to open a previously saved project. It will also display the last few saved projects. T o open or close this or any panel click on the down or up arrow o ...
-
Primera Technology SE - page 24
20 Creating Discs on a PC 4. R obot Status P anel This panel displays a picture of currently connected robot. The current status is also displayed. Important er rors such as low ink will be displayed here. Click " more status " to view status regarding the printer , recorder drive, cur rently r unning jobs and job history log. 5. Status B ...
-
Primera Technology SE - page 25
Creating Discs on a PC 21 C. CREA TING A PRINT LABEL USING SURETHING The SureThing Disc Labeler software included with your Publisher is a great tool for creating professional looking discs. Y ou can use SureThing's Smart Designs to quickly label a disc, or easily import your own design in many popular file formats. The Help section included w ...
-
Primera Technology SE - page 26
4A. Open the text panel by clicking the arrow on the text button. A dd text by selecting one of the options below . T o create text that follows the curve of the disc choose A dd Circular T ext. 4B. Y ou may also choose from several SureThing smart designs. These design templates automatically position your text and use certain te xt effects to giv ...
-
Primera Technology SE - page 27
Creating Discs on a PC 23 Click on the Disc Publisher SE icon with the right mouse button and select Printing P r efer ences . NO TE: The PTP ublisher application allows you to adjust some of these set- ting directly through the Add a Print file scr een in that application. In PTP ublisher you also have the option to Use Driver Defaults. If this op ...
-
Primera Technology SE - page 28
24 Creating Discs on a PC Paper Size The paper size option will be set to CD for printing onto printable surface CDs and DVDs. The remaining options apply if you have purchased the business card adapter kit. Non-printable Outer Mar gin A djust this value to print all the way to the outer edge of a CD. This is useful if you are printing full coverag ...
-
Primera Technology SE - page 29
Creating Discs on a PC 25 NO TE: Exact color matching of the printed discs to the screen may never be possible since there ar e factors that affect this out of the drivers control. The surface of the disc reacts with the ink in the cartridge to produce the color . F or this reason, when printing the same image to different types of discs with diffe ...
-
Primera Technology SE - page 30
26 Creating Discs on a PC Center T he Print Image NO TE: Y our printer comes from the factor y pre-calibrated to print the image in the center of the CD. Y ou can use this adjustment if you need to fine-tune this location. If you ever wish to verify your factory-calibrated V ertical and Horizontal calibration settings, you can run a simple calibrat ...
-
Primera Technology SE - page 31
Creating Discs on a PC 27 5. Along the V ertical axis of the printed disc, find the number whose lines touch. F or example, in the above illustration, Enter the number 2 into the V ertical box of the Calibration window and 0 for the Horizontal axis. 6. Select the OK button. Y our images should now be centered when printed on a disc. After your sele ...
-
Primera Technology SE - page 32
28 Creating Discs on a PC Details Select the Details button for information on the drivers, firmware, alignment and number of discs printed with your Publisher . Click Reset F actory Default to set all print centering and cartridge alignment settings back to factory defaults. Enable Bi-di Printing Set this option to Y es for faster printing that re ...
-
Primera Technology SE - page 33
Creating Discs on a Mac 29 Section 4: Cr eating Discs on a Mac A. TUT ORIAL: COPY A CD OR DVD 1. Double click the Discribe Icon to launch the program. Y ou will see a splash screen followed by Discribe's Quick Start Menu. 2. Click the Copy a CD/D VD button. 3. Place your master disc in the Publisher Drive. Impor tant! Y ou must place your mast ...
-
Primera Technology SE - page 34
30 Creating Discs on a Mac 4. Select the drive that contains your master as the source drive. 5. Click the Bur n… button 6. The Robot W rite Options window contains selections to help you control the printing of the image, number of discs, recording options and more. 7. Click the Print Image on Discs button to enable printing. This will enable ot ...
-
Primera Technology SE - page 35
Creating Discs on a Mac 31 9. Y OU MUST CLICK P age Setup and set F or mat F or to Disc P ublisher SE! Also set the option to select a paper size to correspond with the type of disc you are using. 10. Print Settings will launch the P rinter Driver settings when clicked. These settings are described in detail in Section 4-D of this manual. 11. Selec ...
-
Primera Technology SE - page 36
32 Creating Discs on a Mac B. USING DISCRIBE 5.3 B.1 Star ting a Pr oject The initial Discribe starter window provides 3 project types: A udio CD, Data CD and Copy CD / DVD. Choose one. Many more projects are available once the data picker window is open. Once you are in one of the main three project types you may choose any of the other available ...
-
Primera Technology SE - page 37
Creating Discs on a Mac 33 Universal Disk F or mat (UDF). Use this project type to create a data DVD for a Mac and a PC. D VD V ideo/A udio. This project type can be used to create DVD videos from properly formatted V ideo_TS and A udio_TS folders on your hard drive. Note: V ideo_TS and A udio_TS folders must first be created by a DVD authoring pro ...
-
Primera Technology SE - page 38
34 Creating Discs on a Mac B.4 Queue Pr ojects T o queue a project choose the Queue Job button at the bottom of the Data Picker window instead of the Burn button. If you have not yet saved your project, you will be prompted to do so at this time. The Robot W rite W indow described in section 4B.5 will be displayed. Once you choose your print file a ...
-
Primera Technology SE - page 39
Creating Discs on a Mac 35 B.5 Robot Write Window F or any project Use the Robot W rite W indow to choose the print file, change print quality settings and choose the number of copies in a project. Print settings are e xplained in more detail in section 4D. Other settings on this screen can usually be left at their default values. Impor tant Note: ...
-
Primera Technology SE - page 40
36 Creating Discs on a Mac C. PRINTED LABEL FORMA T REQUIREMENTS Y our printer driver allows you to create labels in most any graphics application. The driver will center the image and automatically crop it to the shape of a CD. This means you do not necessarily need a template to create a CD in your favorite graphics program. Simply create a custo ...
-
Primera Technology SE - page 41
Creating Discs on a Mac 37 D. AD V ANCED PRINTER DRIVER FUNCTIONS The following section will examine the printer driver settings that affect the print quality of your discs. While the default settings will fit most printing needs, it is a good idea to familiarize yourself with these settings to optimize your print quality . The printer driver setti ...
-
Primera Technology SE - page 42
38 Creating Discs on a Mac Print Settings Click Print Settings to see the driver window and all of its settings. Click the Copies and P ages button and select Publisher Settings option in the drop-down menu to see the full pane and access all the printer driver settings. The following is a description of the printer driver settings: • Print Quali ...
-
Primera Technology SE - page 43
Creating Discs on a Mac 39 Photo mode is best used for photographic images where accurate color reproduction is very essential. Images printed in this mode will look lighter than those printed in Photo mode. Skin tones especially will look more natural in this mode. NO TE: Exact color matching of the printed discs to the screen may never be possibl ...
-
Primera Technology SE - page 44
40 Creating Discs on a Mac • Restore Defaults The Restore Defaults button will restore the driver settings to the factory defaults. • Config Utility This button launches the Configuration Utility . The Configuration Utility is a program that installs with your Publisher software. This utility allows you to monitor ink levels, maintain and calib ...
-
Primera Technology SE - page 45
Creating Discs on a Mac 41 Y ou will see the Color Ink Level is displayed. The Color Ink Level represents the lowest color in your cartridge. F or instance, if your cartridge has 80% cyan 50% yellow and 65% magenta ink remaining, the level reported would be 50%. Y ou will also see the following buttons: Clean Car tridge A cartridge that sits idle i ...
-
Primera Technology SE - page 46
42 Creating Discs on a Mac Image Alignment The Image Alignment button will allow you to nudge the image up, down, left, or right on your disc. T o center the image, click the Image Alignment button. Y ou will be prompted with a choice to print a test print or simply enter values to nudge the image alignment on the disc. If you do not know the direc ...
-
Primera Technology SE - page 47
Creating Discs on a Mac 43 Once the print has finished, you will see the following dialog box: Look at the finished alignment disc and pick the numbers that come closest to lining up with one another . For instance, on the disc shown in this manual, the vertical alignment is 2 and the horizontal alignment is 0. Enter this in the alignment dialog bo ...
-
Primera Technology SE - page 48
44 Maintenance and T r oubleshooting Section 5: Maintenace and T r oubleshooting A. INTERPRETING THE PUBLISHER’S INDICA TOR LIGHTS The P ower/Ink button can tell you what is happening inside the Publisher . Please refer to the following: P ower/Ink Button Publisher F ast Flashing The Publisher is initializing.Y ou will see this pattern when the P ...
-
Primera Technology SE - page 49
Maintenance and T r oubleshooting 45 C. PERFORMING A ROBO TIC SELF-TEST T o ensure that everything is working properly , a Self- T est feature is built in to your Publisher . In this mode, the Robotic Disc T ransporter will go through the motions of picking and placing a disc to ensure proper working order . This test may be perfor med without conn ...
-
Primera Technology SE - page 50
46 Maintenance and T r oubleshooting E. TECHNICAL SUPPORT If you have difficulties in operating your Publisher , the procedures in this manual and the software User's Guide should, in most cases, solve the problem. If you still have difficulty , contact the technical support number listed on the insert included in the supply pack that came wit ...
-
Primera Technology SE - page 51
T echnical Specifications 47 Section 6 : T echnical Specifications Model Optical Disc Publisher SE Configurations DVD+/-R Publisher Printing Method Ink-Jet Printing Resolution 4800 x 1200 dpi, 2400 x 1200 dpi, 1200 x 1200 dpi, 600 x 600 dpi Ink T ypes One 3-color (CMY) cartridge Media T ypes Ink-Jet Printable Surface CD -R, CD -RW , DVD-R , DVD RAM ...
-
Primera Technology SE - page 52
48 Index Inde x Align Cartridge ..................................................................13, 25, 41 Cartridge, Change ....................................................................27, 41 CD T ray ..............................................................................................6 Centering T est Print ..................... ...
-
Primera Technology SE - page 53
Printed in the United States of America P/N 510963 510963.qxd 7/17/2006 11:05 AM Page 52 ...
Do you have a question concerning Primera Technology SE?
Use the form below
If you did not solve your problem by using a manual Primera Technology SE, ask a question using the form below. If a user had a similar problem with Primera Technology SE it is likely that he will want to share the way to solve it.