English dropdown-ico

Manual Magnavox VR201BMG

44 pages 0.55 mb
Download

Go to site of 44

Summary
  • Magnavox VR201BMG - page 1

    VC R VR20 1 BMG Video Cassette Recorder Video Cassette Recorder Owner’s Manual Owner’s Manual ...

  • Magnavox VR201BMG - page 2

    Once your purchase is registered, you’re eligible to receive all the privileges of owning this prod- uct. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. MAC5097 Return your Warranty Registration Card today to ensure you receive all the benefits you’re en ...

  • Magnavox VR201BMG - page 3

    Introduction 3 Features • Automatic Channel Setup • Automatic Head Cleaner • Automatic Operation Features • Automatic Tracking Adjustment • Blue Background • Daylight-Savings Time • Display Panel • Front Panel Menu Access • High Quality (HQ) System • On-Screen Displays in English or Spanish • One-Touch Recording • Real-Time ...

  • Magnavox VR201BMG - page 4

    4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Using Your VCR . . . . . . . . . . . . . . . ...

  • Magnavox VR201BMG - page 5

    ● Use only tapes with the mark. ● Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCR. Removable labels can jam the VCR. ● Periodic maintenance is required to maintain your VCR’s excel- lent performance. This VCR has an Automatic Head Cleaner. However, the video heads will require repla ...

  • Magnavox VR201BMG - page 6

    VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT OR VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT 75 V ANT / CABLE OR 75 ANT / CABLE 6 Hookups Without a Cable Box / Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Ster ...

  • Magnavox VR201BMG - page 7

    VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT CH 4 or CH 3 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT CH3 / CH4 Switch CH3 CH4 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT 75 V ANT / CABLE VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT 75 ANT / CABLE RF coaxial cable Antenna or Cable 3 Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the VCR and to the AN ...

  • Magnavox VR201BMG - page 8

    8 Hookups With a Cable Box / Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: ● You may view any channel. ● You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR. ● You may not view a channel other than the one you are recording. ● You may not program c ...

  • Magnavox VR201BMG - page 9

    Hookups With a Cable Box / Direct Broadcast System (cont’d) 9 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT IN OUT 75 ANT / CABLE With this connection: ● You may watch one channel while recording another. ● You may not record scrambled channels. Recording One Channel/Watching Another 1 Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 ...

  • Magnavox VR201BMG - page 10

    10 Hookups With a Stereo TV VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT antenna or cable to ANT(enna) IN Jack Video Cable Audio Cable VIDEO (yellow) and AUDIO (white) OUT Jacks Audio and Video IN Jacks on TV ● Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. 2 Connect a video cable ...

  • Magnavox VR201BMG - page 11

    1 Press the POWER button. The VCR/TV light and the POWER light will appear on the display panel. 2 Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCR. The display shown below will appear. (If the display does not appear, check your hookups, then follow the steps on page 12 to set up channels and page 17 to selec ...

  • Magnavox VR201BMG - page 12

    12 Automatic Channel Setup 1 Press the MENU button . SELECT op CHOOSE B → PROGRAM VCR SET UP TUNER SET UP SET CLOCK TO END PUSH EXIT • You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on the screen briefly. • You can not program ch ...

  • Magnavox VR201BMG - page 13

    Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels 1 Press the MENU button . SELECT op ADD/DELETE B 124 DELETED 125 DELETED 1 → DELETED 2 ADDED 3 ADDED TO END PUSH EXIT 2 Press the PLAY/ o button or the STOP/ p button to select TUNER SET UP, then press the F.FWD/ B button. 3 Press the PLAY/ o button or the STOP/ p button to select ADD ...

  • Magnavox VR201BMG - page 14

    14 Automatic Channel Setup (cont’d) Reviewing Memorized Channels 3 Press the PLAY/ o button or the STOP/ p button to select CH MEMORY REVIEW, then press the F.FWD/ B button. A list of programmed channels will appear on the screen. ● If all the programmed channels don’t fit on the screen, press the F.FWD/ B button to see the remaining channels ...

  • Magnavox VR201BMG - page 15

    TIME 02 :15 PM MONTH – – / – – / – – TO CORRECT PUSH CLEAR TO END PUSH EXIT Setting the Clock 15 Follow the steps below to set your VCR’s clock. Make sure: ● The VCR is on and the VCR/TV light appears on the display panel. (If it does not, press the VCR/TV button once.) ● You make each entry within 60 seconds of the previous entry ...

  • Magnavox VR201BMG - page 16

    1 Press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select SET CLOCK, then press the F.FWD/ B button. 4 Press the STATUS/EXIT button. SET CLOCK → SET CLOCK DAYLIGHT SVG TIME [ON] SELECT op CHOOSE B TO END PUSH EXIT SELECT op CHOOSE B → PROGRAM VCR SET UP TUNER SET UP SET CLOCK TO END PUSH EXIT 16 Daylight-Savings Time Y ...

  • Magnavox VR201BMG - page 17

    Language Selection 17 1 Press the MENU button . Follow the steps below to change the language of the on-screen displays and menus. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 3 Press the PLAY/ o button or the STOP/ p button to select LANGUAGE, then press the F.FWD/ B button. 4 Press the PLA ...

  • Magnavox VR201BMG - page 18

    18 Remote Control Buttons POWER EJECT VCR/TV 1 2 3 4 5 6 7 8 9 0 CHANNEL MEMORY STATUS/EXIT CLEAR MENU REWIND /PLAY F.FWD REC/OTR PAUSE/STILL /STOP SPEED SPEED Button Press to select the recording speed (SP or SLP). Details are on pages 30 and 37. REC(ord)/OTR Button Press once to start a recording. Details are on page 25 . Or, press repeatedly to ...

  • Magnavox VR201BMG - page 19

    Remote Control Buttons (cont’d) 19 CLEAR Button Press to erase incorrect data when programming VCR functions. Also, press to reset the real-time counter. Details are on page 34. VCR/TV Button Use to select the signal that your TV receives. VCR Position ● Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast usin ...

  • Magnavox VR201BMG - page 20

    SELECT op CHOOSE B → STATUS [ON] COUNTER ONLY [OFF] TO END PUSH EXIT 20 On-Screen Status Displays • You may not access a status display when viewing a still picture or dur- ing forward or reverse searching. • The status display may not appear if a weak channel is selected and BLUE BACKGROUND is set to OFF. Details are on page 13. Helpful Hint ...

  • Magnavox VR201BMG - page 21

    POWER VCR/TV CST.IN TIMER REC STOP/EJECT REC/OTR MENU STATUS/EXIT F.FWD PAUSE REW CHANNEL PLAY POWER POWER VCR/TV VCR/TV CST.IN TIMER REC VIDEO AUDIO VCR Display Panel 21 Cassette Compartment Insert a tape here. VCR/TV Light This light appears when the VCR is in VCR position. This light does not appear when the VCR is in TV position. REC(ord) Light ...

  • Magnavox VR201BMG - page 22

    22 Front Panel PAUSE Button While recording, press to pause the recording. Press again to resume recording. Details are on page 25. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. Each press of the PAUSE button will cause the noise lines to move on the screen. Press PLAY to resume normal playback. Details ...

  • Magnavox VR201BMG - page 23

    AUDIO IN Jack Connect a cable coming from the AUDIO OUT Jack of a camcorder, another VCR, or an audio source here. Details are on page 32. VIDEO IN Jack Connect a cable coming from the VIDEO OUT Jack of a cam- corder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. Details are on page 32. ANT(enna) IN Jack ...

  • Magnavox VR201BMG - page 24

    24 Playing • If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) Press the PLAY/ o button. • Other playback options and features are on pages 33-36. • When you play a tape recorded in ...

  • Magnavox VR201BMG - page 25

    Read and follow the steps below to record a television program. 1 Turn on the TV and set it to channel 3 or 4 , whichever channel the CH3/CH4 switch on the back of the VCR is set to. Recording 25 2 Insert a tape with its record tab intact in the VCR. 3 If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appe ...

  • Magnavox VR201BMG - page 26

    1 Press the REC(ord)/OTR button to start a recording of the current channel. (Details are on page 25.) 26 Recording One Channel/Watching Another • If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details. Helpful Hint 2 Press the VCR/TV button to p ...

  • Magnavox VR201BMG - page 27

    One-Touch Recording 27 1 Press the CHANNEL o / p buttons or the Number but- tons to select the channel you want to record. OTR (0:30) CH12 2 Press the REC(ord)/OTR button repeatedly until the desired recording length (30 minutes to eight hours) appears on the screen. Recording will begin immediately. The REC(ord) light and the TIMER light will appe ...

  • Magnavox VR201BMG - page 28

    DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- SELECT PROGRAM NUMBER TO END PUSH EXIT 28 Timer Recording Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin: ● Set up the channels at the VCR. ● Set the clock. ...

  • Magnavox VR201BMG - page 29

    ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON – – : – – TO CORRECT PUSH CLEAR TO END PUSH EXIT 6 Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHA ...

  • Magnavox VR201BMG - page 30

    ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 SLP=2 TO CORRECT PUSH CLEAR TO END PUSH EXIT 30 Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed or the Number 2 button to record in SLP speed. (See the chart below.) You cannot use the SPEED button at this time. 9 Press two Numbe ...

  • Magnavox VR201BMG - page 31

    Timer Recording (cont’d) 31 6 Repeat steps 1-4 to make sure you have cleared the cor- rect timer recording. • CLASH may flash on the screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer record- ing overlap. The current timer recording will not take place. You may choose to c ...

  • Magnavox VR201BMG - page 32

    1 Make the connections shown above. 32 Rerecording (Tape Duplication) 3 VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) 4 Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch o ...

  • Magnavox VR201BMG - page 33

    Repeat Play 33 Follow the steps below to make the VCR play a tape over and over. 1 Press the MENU button. 2 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 4 Press the F.FWD/ B button so that ON appears beside REPEAT PLAY. 5 Press the STATUS/EXIT button. Now, when a tape has fin- ished playing, t ...

  • Magnavox VR201BMG - page 34

    • The MEMORY button does not function if REPEAT PLAY is set to ON. Details are on page 33. • To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen. • You may only set the real-time counter to zero at one location at a time. If you set the real-time counter to zero at a second loca- tion, the pre ...

  • Magnavox VR201BMG - page 35

    POWER EJECT VCR/TV 1 2 3 4 5 6 7 8 9 0 CHANNEL MEMORY STATUS/EXIT CLEAR MENU REWIND /PLAY F.FWD REC/OTR PAUSE/STILL /STOP SPEED Special Effects Playback 35 Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REWIND/ { button. A fast forward or reverse picture search will begin. 2 To return ...

  • Magnavox VR201BMG - page 36

    36 Automatic Operation Features The following playback features will always operate. Automatic Playback When you put a tape in the VCR, the power will come on auto- matically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automati- cally when you insert a tape with the record tab ...

  • Magnavox VR201BMG - page 37

    Glossary 37 AUDIO IN/OUT Jacks: jacks located on the front and back of the VCR which are used to record audio from another source (IN) or to send audio to another system (OUT). Automatic Channel Setup: process in which the VCR memo- rizes all available channels. Then, when you press the CHANNEL o / p buttons, you only scan through channels you rece ...

  • Magnavox VR201BMG - page 38

    If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of ...

  • Magnavox VR201BMG - page 39

    TV programs cannot be watched normally. • Put the VCR in TV position. (Press the VCR/TV button so that the VCR/TV light disappears from the dis- play panel. Details are on page 22. ) • Check the connections between the VCR, TV, antenna/cable, and Cable Box/Direct Broadcast System (if applicable). Details are on pages six-10. Tape cannot be inse ...

  • Magnavox VR201BMG - page 40

    40 Specifications Video Heads Two heads Video Signal EIA standards; NTSC color Antenna VHF/UHF – 75 ohm external antenna terminal VHF Output Signal Channel 03 or 04 (switchable) 75 ohms unbalanced Power Requirement 120V AC; 60Hz Power Consumption 12W Operating Temperature 41°F (5°C) to 104°F (40°C) Relative Humidity 10% to 80% Weight 5.3 lbs. ...

  • Magnavox VR201BMG - page 41

    RENEWED 90 DAY LIMITED WARRANTY ...

  • Magnavox VR201BMG - page 42

    ac power cord .................................23 accessories .......................................44 ant(enna) in jack ...................6-10, 23 audio in/out jacks 10, 22, 23, 32, 37 automatic playback .......................................36 rewind, eject, off........................36 batteries .............................................. ...

  • Magnavox VR201BMG - page 43

    ...

  • Magnavox VR201BMG - page 44

    IB8178E001 Printed In China 0VMN02392 / H57P0UD * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your VCR; they are provided to help you use or set up your VCR. The following additional items are not provided with your VCR, but they are designed for use with your new VCR. To order these optional accessor ...

Manufacturer Magnavox Category VCR

Documents that we receive from a manufacturer of a Magnavox VR201BMG can be divided into several groups. They are, among others:
- Magnavox technical drawings
- VR201BMG manuals
- Magnavox product data sheets
- information booklets
- or energy labels Magnavox VR201BMG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Magnavox VR201BMG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Magnavox VR201BMG, service manual, brief instructions and user manuals Magnavox VR201BMG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Magnavox VR201BMG.

Similar manuals

A complete manual for the device Magnavox VR201BMG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Magnavox VR201BMG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Magnavox VR201BMG.

A complete Magnavox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Magnavox VR201BMG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Magnavox VR201BMG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Magnavox VR201BMG, that we can find in the current document
3. Tips how to use the basic functions of the device Magnavox VR201BMG - which should help us in our first steps of using Magnavox VR201BMG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Magnavox VR201BMG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Magnavox VR201BMG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Magnavox VR201BMG?

Use the form below

If you did not solve your problem by using a manual Magnavox VR201BMG, ask a question using the form below. If a user had a similar problem with Magnavox VR201BMG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)