-
Fisher PLC-XW20A - page 1
Multimedia Pr ojector MODEL PLC-XW20A Owner’ s Man ual ...
-
Fisher PLC-XW20A - page 2
2 C AU TI ON : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT ...
-
Fisher PLC-XW20A - page 3
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions ...
-
Fisher PLC-XW20A - page 4
4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl ...
-
Fisher PLC-XW20A - page 5
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT 22 VIDEO INPUT 30 SETTING 35 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 ADJUSTABLE FEET 9 MOVING PROJECTOR 10 CONNECTING PR OJECT OR 11 TERMINALS OF PROJECTOR 11 CONNECTING TO CO ...
-
Fisher PLC-XW20A - page 6
6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and co ...
-
Fisher PLC-XW20A - page 7
7 PREP ARA TION NAME OF EA CH P AR T OF PROJECT OR BO TT OM BACK HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, following precautions should be taken. ● Do not put any flammable object near these vents. ● Keep front grills at least 3 ’ (1m) away from any object, especially heat-sensitive object. ? ...
-
Fisher PLC-XW20A - page 8
NO TE ON THE PO WER CORD AC Power Cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. SETTING-UP PR OJECT OR 8 PREP ARA TION To POWER CORD CONNECTOR on your projecto ...
-
Fisher PLC-XW20A - page 9
9 PREP ARA TION POSITIONING PR OJECT OR ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.6 degrees. Lift the front of a projector and pull FEET LOCK LATCHES on the both sides of a projector. 1 ADJUSTABLE FEET FEET LOCK LATCHES Release FEET LOCK LATCHES to lock ADJ ...
-
Fisher PLC-XW20A - page 10
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a pro ...
-
Fisher PLC-XW20A - page 11
A UDIO OUT AV A UDIO IN COMPUTER USB RESET VIDEO CONTROL POR T S – VIDEO COMPUTER IN Y – Pb / Cb – Pr / Cr 11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR When controlling a computer with the Wireless Remote Control Unit that is optionally supplied, connect the mouse port of the computer to this connector. The Remote Control Unit supplied ...
-
Fisher PLC-XW20A - page 12
12 CONNECTING PR OJECT OR A UDIO OUT AV A UDIO IN COMPUTER USB RESET VIDEO S – VIDEO CONTROL PORT COMPUTER IN Y – Pb / Cb – Pr / Cr ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 34 5 6 OFF OFF ON ON ON ON 21" MO ...
-
Fisher PLC-XW20A - page 13
13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT A UDIO OUT AV A UDIO IN COMPUTER USB RESET VIDEO Y – Pb / Cb – Pr / Cr S – VIDEO COMPUTER IN CONTROL PORT Video Source (example) Video Cassette Recorder Video Disc Player Video Cable (RCA x 1) ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) Audio Cable (Stereo) ✽ Terminal ...
-
Fisher PLC-XW20A - page 14
+ – INPUT ON–OFF KEYST ONE D.ZOOM V OLUME MENU NOSHOW FREEZE A UTO PC ADJ . P–TIMER MUTE IMAGE SELECT 14 BEFORE OPERA TION Battery is installed in Remote Control Unit. Before operation, pull out and remove a protect sheet from Remote Control Unit. This sheet protecting discharge of a battery. A UTO PC ADJ . P – TIMER IMAGE BATTERY PROTECT S ...
-
Fisher PLC-XW20A - page 15
15 BEFORE OPERA TION Pull out Battery Holder. Replace with new battery. Install with battery (+),( – ) marks properly. Install battery and Battery Holder into Remote Control Unit. BATTERY LITHIUM BATTERY CR2025 (3.0V) (+) mark indicates its (+) polarity. Put Battery + mark as shown direction. BATTERY HOLDER REMO TE CONTR OL B A TTER Y INST ALLA T ...
-
Fisher PLC-XW20A - page 16
16 SELECT IMA GE MENU INPUT ON – OFF LAMP READ Y W ARNING TEMP . LAMP REPLACE -V OLUME- BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS ...
-
Fisher PLC-XW20A - page 17
17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons. ...
-
Fisher PLC-XW20A - page 18
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / Color / Tint / White balance (R/G/B) / Sharpness / Gamma / Auto grayscale / Auto fleshtone] (Refer to P28, 29) SETTING MENU Used to change settings of projector or reset Lamp Repl ...
-
Fisher PLC-XW20A - page 19
19 TURNING ON PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate. Preparation Display appears on a screen and the count-down starts. The ...
-
Fisher PLC-XW20A - page 20
20 Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT 1 Press KEYSTONE ▲ / ▼ button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 35.) Keystone dialog box appears. 2 Co ...
-
Fisher PLC-XW20A - page 21
21 B ASIC OPERA TION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press P-TIMER button on Remote Control Unit. The timer display “ 00 : 00 ” appears on the screen and the timer starts t ...
-
Fisher PLC-XW20A - page 22
22 COMPUTER INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to m ...
-
Fisher PLC-XW20A - page 23
23 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 72 ...
-
Fisher PLC-XW20A - page 24
24 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame point ...
-
Fisher PLC-XW20A - page 25
25 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector. If this happens, projector cannot repr ...
-
Fisher PLC-XW20A - page 26
26 COMPUTER INPUT NOT E : Fine sync, Total dots, Display area (H/V) and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P22). Selects area displayed with this projector. Select the resolution at Display area dialog box. Display area Adjustment of horizontal area displayed with this pro ...
-
Fisher PLC-XW20A - page 27
27 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button. Move a red frame pointer ...
-
Fisher PLC-XW20A - page 28
28 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust. and then press SELECT button. The level of each item is ...
-
Fisher PLC-XW20A - page 29
29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappears and the ...
-
Fisher PLC-XW20A - page 30
30 VIDEO INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to ...
-
Fisher PLC-XW20A - page 31
31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer to the system that you want to select and then press SELECT ...
-
Fisher PLC-XW20A - page 32
32 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the level that you want to set and then press SELECT button. Move the red frame pointer ...
-
Fisher PLC-XW20A - page 33
33 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. The level of each item is d ...
-
Fisher PLC-XW20A - page 34
34 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to the function ...
-
Fisher PLC-XW20A - page 35
35 SETTING Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed. This function is used to project the image to a rear projection screen. Ceiling function Rear fu ...
-
Fisher PLC-XW20A - page 36
36 SETTING This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn Projection Lamp off when the input signal is interrupte ...
-
Fisher PLC-XW20A - page 37
37 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of Projection Lamp of this projector draws to an end, LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give ...
-
Fisher PLC-XW20A - page 38
38 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter until after Projection Lamp is replaced. Move the pointer to Lamp counter reset and then press SELECT button. The ...
-
Fisher PLC-XW20A - page 39
39 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace Lens Cover. 1 3 Lightly wipe Projection Lens with a cleaning cloth. 2 Follow ...
-
Fisher PLC-XW20A - page 40
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection. Verify that all computer, video and p ...
-
Fisher PLC-XW20A - page 41
41 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still pers ...
-
Fisher PLC-XW20A - page 42
42 APPENDIX TECHNICAL SPECIFICA TIONS 0.7" TFT Active Matrix type, 3 panels Multi-media Projector 6.2lbs (2.8 kg) 10.12" x 2.98" x 9.02" (257mm x 75.8mm x 229mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz ...
-
Fisher PLC-XW20A - page 43
43 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 No Connect Horiz. sync. Ground (Vert.sync.) Sense 1 Sense 0 Vert. sync. Reserved 9 13 10 12 11 14 1 ...
-
Fisher PLC-XW20A - page 44
Printed in Japan Part No. 610 300 4365 (1AA6P1P3388-- MR8A) SANYO Electric Co., Ltd. ...
Do you have a question concerning Fisher PLC-XW20A?
Use the form below
If you did not solve your problem by using a manual Fisher PLC-XW20A, ask a question using the form below. If a user had a similar problem with Fisher PLC-XW20A it is likely that he will want to share the way to solve it.