Manual Perle Systems S-100-XXXXX

15 pages 0.1 mb
Download

Go to site of 15

Summary
  • Perle Systems S-100-XXXXX - page 1

    P/N 5500301-15 Perle Fast Ethernet Media Con verters Installation Guide S-100-XXX XX ...

  • Perle Systems S-100-XXXXX - page 2

    Fast Ethernet Media Converter – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operation of the Perle Fast Ethernet Standalone M edia Con verters (S-100). Thes e products c onvert a 1 00Base-T X cable c onnection (copper) to a 100Base-X connection (f iber). The f iber connect ion can be ...

  • Perle Systems S-100-XXXXX - page 3

    Fast Ethernet Media Converter – Installation Guide 3 Installatio n The default s witch settings (all switches in the U P position) will work for m ost installations. There are f ive steps requ ired to conf igure the Perl e Fast Ether net media conv erter: 1. Set the Auto- MDIX jum per setting (op tional). 2. Set the s witch settings ( optional). ...

  • Perle Systems S-100-XXXXX - page 4

    Fast Ethernet Media Converter – Installation Guide 4 DIP Switches The DIP s witches are ac cessible throu gh the open ing in the s ide of the enclosure Note: All switch cha nges tak e effect imm ediately and will resu lt in a link reset on both ports. DIP Switch Settings Auto Negoti ation (Sw itch 1) Switch Posit ion Mode Up (defau lt) Auto Down ...

  • Perle Systems S-100-XXXXX - page 5

    Fast Ethernet Media Converter – Installation Guide 5 Link M ode (Switch 2) Switch Posit ion Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the link state on one connec tion is directly reflecte d throug h the m edia converter to th e other conn ection. If link is lost o n one of the connections, t ...

  • Perle Systems S-100-XXXXX - page 6

    Fast Ethernet Media Converter – Installation Guide 6 If the m edia converter has been s et to Link Pass-T hrough mode, the effec t will be the sam e as FEF, since the link loss on the fiber r eceiver will bring do wn the copp er link, which will in turn c ause the tra nsm it fiber link to be brought d own. Note: T his switch needs to be set to e ...

  • Perle Systems S-100-XXXXX - page 7

    Fast Ethernet Media Converter – Installation Guide 7 Pause (Sw itch 5) Switch Posit ion Mode Up (defau lt) Enabled Down Disabled Enabled: W hen Auto Neg otiation has been set to Auto (SW 1), the media conv erter will use t his setting f or its Ethernet param eter negotiation o n the cop per connection. Disable: The m edia co nverter will not nego ...

  • Perle Systems S-100-XXXXX - page 8

    Fast Ethernet Media Converter – Installation Guide 8 Installing the Duplex Fiber Cable • Locate a 100 Base-X c ompliant dup lex (2 strands ) fiber cable with male co nnections. • Connect the fiber cables f rom one media convert er to the other media conv erter/switch/f iber device e nsuring th at the RX and TX are reversed a t the oppos ite e ...

  • Perle Systems S-100-XXXXX - page 9

    Fast Ethernet Media Converter – Installation Guide 9 Powering up the Perle Media Conv erter • Connect the Perle supp lied power adapter to th e media converter. • Turn on the power at so urce. • Check that the PW R LED light is lit an d on solid. Operation Status LED The Perle F ast Ethernet M edia converter s have thre e single col or stat ...

  • Perle Systems S-100-XXXXX - page 10

    Fast Ethernet Media Converter – Installation Guide 10 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium -dependant inter face crossover) detects the s ignalling on the 100B ASE-T interf ace to deter mine the type of cabl e connected (s traight-throu gh or cross over) and automatical ly configures t he conn ection. Error Recov ery: In certa ...

  • Perle Systems S-100-XXXXX - page 11

    Fast Ethernet Media Converter – Installation Guide 11 Troubleshooting General • Ensure po wer is supplied t o the m edia converter – use of the supplied po wer adapter s is highl y recomm ended. • Ensure both devices on either end of the fiber are c om patible. If using a sim plex fiber con nection, ens ure that you have both an Upstream (U ...

  • Perle Systems S-100-XXXXX - page 12

    Fast Ethernet Media Converter – Installation Guide 12 Technical Specifications The f ollowing applies to a ll S-100 m edia con verters: Power Inpu t/Consump tion 12V DC / 2.0 W Operating T emperatur e: 0°C to 50°C (32°F to 122°F) Storage Tem perature: - 25°C to 70°C (-13°F to 158°F) Operating Hu midity: 5% to 90% non-condensing Storage Hu ...

  • Perle Systems S-100-XXXXX - page 13

    Fast Ethernet Media Converter – Installation Guide 13 S-100-S2LC80 SM TX: 15 50 RX: 1550 Min: -5 Max: 0 Min: -34 Max: -3 29 S-100-S2SC120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 S-100-S2ST120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: 0 35 S-100-S2LC120 SM TX: 1550 RX: 1550 Min: 0 Max: 5 Min: -35 Max: -3 35 S-100-S1SC20U SM T ...

  • Perle Systems S-100-XXXXX - page 14

    Fast Ethernet Media Converter – Installation Guide 14 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital devi ce, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equip ment is operated in a commercial enviro ...

  • Perle Systems S-100-XXXXX - page 15

    Fast Ethernet Media Converter – Installation Guide 15 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with r eturn to factor y repa irs for Perle products that fail und er the co nditions of the warrant y coverage. Detai ls can be f ound at: http://www .perle.com/sup port_servic es/warran ty.shtm l Contacting ...

Manufacturer Perle Systems Category TV Converter Box

Documents that we receive from a manufacturer of a Perle Systems S-100-XXXXX can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- S-100-XXXXX manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems S-100-XXXXX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems S-100-XXXXX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems S-100-XXXXX, service manual, brief instructions and user manuals Perle Systems S-100-XXXXX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems S-100-XXXXX.

A complete manual for the device Perle Systems S-100-XXXXX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems S-100-XXXXX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems S-100-XXXXX.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems S-100-XXXXX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems S-100-XXXXX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems S-100-XXXXX, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems S-100-XXXXX - which should help us in our first steps of using Perle Systems S-100-XXXXX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems S-100-XXXXX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems S-100-XXXXX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems S-100-XXXXX?

Use the form below

If you did not solve your problem by using a manual Perle Systems S-100-XXXXX, ask a question using the form below. If a user had a similar problem with Perle Systems S-100-XXXXX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)