English dropdown-ico

Manual Vidikron Vision 10

74 pages 6.1 mb
Download

Go to site of 74

Summary
  • Vidikron Vision 10 - page 1

    10/12 D LP™ PROJEC T ORS VERSION 2.0 OWNER’S OPERA TING MANU AL ...

  • Vidikron Vision 10 - page 2

    ...

  • Vidikron Vision 10 - page 3

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Pr ocessors and Controllers Congratulations on y our purchase of a Vidikron video product an d welcome to the Vidikron family! With proper instal lation, setu p and care, y ou should enjoy many years of unparalleled video ...

  • Vidikron Vision 10 - page 4

    iv Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y This warranty begins on the effective date of delivery to the end user. For your conven ience, keep the origin al bill of sa le as evidence of the purchase date. Pl e as e f i ll ou t an d ma i l y ou r wa r ra nt y re g is tr a ti o n c ar d . I t i s imperative that Vi ...

  • Vidikron Vision 10 - page 5

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual v PRE L IMINAR Y To locate the name and address of the ne arest Vidikron Authoriz ed Service Center, or for additi onal information about this Limi ted Warranty, please call or write: VIDIKRON At tn: C ustomer Service Depar tment 2900 F aber Street Union City , CA 94587 Ph: (510) 324-5900 ...

  • Vidikron Vision 10 - page 6

    vi Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of th is quality Vidikron video projecto r! It h as been designed to provide yo u with the quality of v ideo that is expected in a home theater. For th e best performance, please read this manual carefully as it is your guide through the menus ...

  • Vidikron Vision 10 - page 7

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual vii 1 Table of Contents PRE L IMINAR Y TWO YEAR LIMIT ED WARRANTY ................ ................... ................ .................... ................... ... iii Safety Precautions ... ................... ................ ................... ................ .................... .. ...

  • Vidikron Vision 10 - page 8

    Table of Contents viii Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Connectio ns to the Vision 10/12 . .............. ............... ............ ............. ............ ............ ............. ... .............. ... 22 Connecto r Panel Access ............... .......... ............. ............ .......... .. ...

  • Vidikron Vision 10 - page 9

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual ix PRE L IMINAR Y 1 List of Figures 2-1. Vision 10/12 Top/Front/Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2-2. Vision 10/12 Rear/Top/Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Vidikron Vision 10 - page 10

    List of Figures x Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y Notes: ...

  • Vidikron Vision 10 - page 11

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual describes how to insta ll, set up and operate th e Vidikron Vision Model 10 and Model 12 DLP Projec tors. Th roughout this manu al, the Vidikron Vision 10/Vision 12 DLP Projector is referr ed to simply as the “Vision 10/12.” ...

  • Vidikron Vision 10 - page 12

    Introduction 2 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y Graphic Conv entions: These symbols appear in numerous pl aces throughout the manu al, to emphasize points tha t you must keep in mi nd to avoid problems with y our equipment or injury: 1.2 Using This Manual Use the following table to locate the spe cif ic in ...

  • Vidikron Vision 10 - page 13

    Introduction Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Vidikron proudly introduces its most affordable home theater projectors to date -- the Vision Model 10 and Model 12. The Vision 10/12 offers a performance feature set based on the la test generation of DL P™ light engi ...

  • Vidikron Vision 10 - page 14

    Introduction 4 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y Parts List Your Vision 10/12 is shipped with the follo win g items. If any items ar e missing or damaged, please contact your Vidikron deal er or Vid ikron Customer Service at (888) 4VIDIKRON. • Vision 10/Vision 12 DLP Projector • AC Power Cord (No rth Am ...

  • Vidikron Vision 10 - page 15

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 5 PRE L IMINAR Y 2.1 Vision 10/12 at a Glance Figure 2-1 and Figur e 2-2 show the locations o f key Vision 10/12 projector compon ents. Front/Top/Side View Figure 2-1. Vision 10/12 Top/Front/Side View 2 Controls and Functions 1 11 10 9 2 3 4 5 6 7 8 ...

  • Vidikron Vision 10 - page 16

    Controls and Functions 6 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y 1. T OP IR SENSOR 2. VERTICAL LENS SHIFT DIAL Shifts the image up or down. 3. INT AKE VENT 4. ADJUST ABLE FEET Use to adjust the he ight or projection angle. 5. VIDIKRON L OGO The logo can be rotated to ma tch the projector orientatio n: inverted (c ...

  • Vidikron Vision 10 - page 17

    Controls and Functions Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 7 PRE L IMINAR Y Rear/Top/Side View Figure 2-2. Vision 10 /12 Rear/Top/Side View HDMI HDMI 1 8 7 2 3 4 6 10 9 5 ...

  • Vidikron Vision 10 - page 18

    Controls and Functions 8 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PRE L IMINAR Y 1. C OMPOSITE VIDEO INPUT Standard composite video input for connecting a VCR, camcorder, laser disc player or other composite video source. 2. S- VIDEO Standard S-Video input for co nn ecting a DVD player, satellite receiv er or Super VHS (S-VHS) V ...

  • Vidikron Vision 10 - page 19

    Controls and Functions Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 9 PRE L IMINAR Y 2.2 Vision 10/12 Remote Control Figure 2-3 shows the Vision 10/12 remote control, and the paragra phs that follow describe its functionality . Figure 2-3. Vision 10/12 Remote Cont rol 1 2 3 4 5 6 7 8 9 10 15 14 13 12 11 ...

  • Vidikron Vision 10 - page 20

    Controls and Functions 10 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 1. ON / OFF Press to turn the pr ojector on or off. 2. IR OUTPUT INDICA T OR Lights when a button is pressed to indicate that an IR signal is being transmitted. 3. Source Selection Buttons: VIDEO Press to switch to the Composite video input. CO MP ...

  • Vidikron Vision 10 - page 21

    Controls and Functions Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 11 PRE L IMINAR Y 9. Not used. 10. LIGHT Press this button to illuminate the buttons. 11. CUST Press to recall settings for the current input from the “Custom” memory preset. 12. ISF NIGHT Press to recall settings for the current in put from the “ISF Night” ...

  • Vidikron Vision 10 - page 22

    Controls and Functions 12 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Notes: ...

  • Vidikron Vision 10 - page 23

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote control: 1. Press down the tab on the cover and pull the cover in th e direction of the arrow. 2. Insert the included batteries. Ensure that the polaritie s correctly match the and markings inside the battery compartm ...

  • Vidikron Vision 10 - page 24

    Installation 14 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Notes on Remote Control Operation The remote control can be used to control the projector within the ra nges shown in Figure 3-1 . Figure 3-1. Available Range of the Remote C ontrol • For best results, hold the remote control within 23 feet (7m) of the ba ...

  • Vidikron Vision 10 - page 25

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the Vision 10/12 installation pr ocess. The sections following this one provid e detailed instructions. Installation should be performed by a qualified custom video installation specia list. Table 3-1. Inst ...

  • Vidikron Vision 10 - page 26

    Installation 16 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your projector will ensure the quality of your displ ay. Whether yo u are installing a pro jector temporarily or permanentl y, you should take the following into account to ensure your projec tor perfor ...

  • Vidikron Vision 10 - page 27

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 17 PRE L IMINAR Y Throw Distance Throw distance is the distance measured from t h e front of the projector to the screen. This is an important calcul ation in any projector in stal lation as it determines whether or not you have enough room to insta ll your projecto r with a ...

  • Vidikron Vision 10 - page 28

    Installation 18 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Vertical and Horizontal Position Proper placeme nt of the projector relative to the screen will yield a rectangular , perfectly-centered image that completely fills the scre en. Ideally, the projector sh ould be positioned pe rpendicular to the screen a nd ...

  • Vidikron Vision 10 - page 29

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 19 PRE L IMINAR Y Figure 3-5. Horizontal Lens Shift (Example only) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) 150% Width Lens Shift (1.5 x W) Screen Width (W) Note: This is a general example of lens shift. Lenses vary in their shift capabi ...

  • Vidikron Vision 10 - page 30

    Installation 20 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Table 3-3 gives the len s shift limits for the Vision 10 and Vision 12, as percent ages and absolute measur ements with a 96 x 54 inch (1.78: 1) screen. Adjusting the Projection Angle If the screen is significantly hi gher o r lower than the proj ector, you ...

  • Vidikron Vision 10 - page 31

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 21 PRE L IMINAR Y Mounting There are several methods for mounting th e projector. Depending on your chosen installation, one method may be more suitable th an another. Floor Mounting: In typical front and rear screen installati ons the projector can be mounted to a secure and ...

  • Vidikron Vision 10 - page 32

    Installation 22 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 3.4 Connections to the Vision 10/12 Proceed as follo ws to connect the Vision 10 /12 to your video sou rces, external co ntroller(s) – if present – and AC pow er. When connecting your equipment: • Turn off all equipment befo re making any connections. ...

  • Vidikron Vision 10 - page 33

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 23 PRE L IMINAR Y Figure 3-7. HDMI (or DVI) Source Connections S-VIDEO VIDEO P R / C R P B / C B Y P R / C R P B / C B Y RGB-HD HDMI S-VIDEO VIDEO P R / C R P B / C B YP R / C R P B / C B Y RGB-HD HDMI COMP 1 COMP 2 COMP 2 COMP 1 RS-232 RS-232 HDMI or DVI Source (DVD Player o ...

  • Vidikron Vision 10 - page 34

    Installation 24 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y RGB-HD Connections: The Vision 10/12 has an RGB input for conne cting a personal computer or DTV decoder wi th an RGB outp ut. See Figu re 3-8 . Figure 3-8. Analog RGB Connections 1. Refer to Computer Signal Compatibility on page 60 for a list of computer s ...

  • Vidikron Vision 10 - page 35

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 25 PRE L IMINAR Y Component Video Connections: If you have a DVD player or DTV decoder with a component (YPbPr) ou tput, conn ect it to the COMP 1 or COMP 2 input as shown in Figure 3-9 . Figure 3-9. Component Video Connections S-VIDEO VIDEO P R / C R P B / C B Y P R / C R P ...

  • Vidikron Vision 10 - page 36

    Installation 26 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Composite/S-Video Connections: The Vision 10/12 has S-Video and composite video inputs for connecting a DVD player, VCR, satellite receiver, camcorde r, laser disc pl ayer et cetera; see Figure 3-10 . Figure 3-10. Composite and S-Video Connections S-VIDEO V ...

  • Vidikron Vision 10 - page 37

    Installation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 27 PRE L IMINAR Y RS-232 Controller Connection Use a standard, 9-pin RS-232 cable to connec t a PC or home theate r control /automation system (if present) to the RS-232 port on the Vision 1 0/12; see Figure 3-11 . For more information about usin g this connecti on, refer to ...

  • Vidikron Vision 10 - page 38

    Installation 28 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Connecting to the 12-Volt Trigger Output If your home theater contains a retractable screen or othe r, 12-Volt trigger-activated equipment, connect it to the 12-volt trigger output on the Vision 10/12 as sh own in Figure 3-12 . Figure 3-12. Connecting the 1 ...

  • Vidikron Vision 10 - page 39

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 29 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source compo nents. 2. Plug the female en d of the power co rd into the AC receptacle on the rear of the Vision 10/12 (AC 100V ~ 240V). 3. Connect the oth er end to your AC power source. The po wer indicator light s blue to indica ...

  • Vidikron Vision 10 - page 40

    Operation 30 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 4.3 Changing the OSD Language The Vision 10/12 OSD language is initially set to English, but can also display the menus in French, Italian, German or Spanish. To ch ange the OSD lan guage: 1. Press MENU . 2. Select Insta llation from the Main Menu. 3. Select L ...

  • Vidikron Vision 10 - page 41

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 31 PRE L IMINAR Y 4.5 Lens Adjustments The Vision 10/12 gives y ou a great deal of cont rol over the picture size, position and focus. Figure 4-2 shows the location of the focus and zoom co ntrols; Figure 4-3 shows the location of the lens shift controls. Focus/Zoom To focus the ...

  • Vidikron Vision 10 - page 42

    Operation 32 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Shift To change the projected image po sition, rotate the vert ical and/or horizontal lens sh ift dials. Figure 4-3. Vertical and Horizontal Lens Shift Controls 4.6 Using the On-Screen Menus To use the on-screen men us: 1. Press MENU to display the Main Menu. ...

  • Vidikron Vision 10 - page 43

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 33 PRE L IMINAR Y Figure 4-4. Vision 10/12 OSD Menu Structure ISF Settings Brightness Contrast Color (not availab le on HDMI or RG B-HD inputs) Tint Sharpnes s 1, 2, 3, 4, 5 Gamma 1.0, 1.5, 1.8, 2.0 , 2.2, 2.35, 2.5, 2.8 Color Temp Native, 5, 000K, 5,500K, ... 10,000K Load Saved ...

  • Vidikron Vision 10 - page 44

    Operation 34 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Main Menu The Main Menu is the st arting point for accessing all projector functions. (The ISF Settings menu is g rayed out and not accessible until yo u enter a passcode.) Source Select From the Main Menu, select Source select to choose a video signal source. ...

  • Vidikron Vision 10 - page 45

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 35 PRE L IMINAR Y Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description Anamorphic (16/9) ANA Select Anamorphic to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen. Standard (4/3) 4X3 ...

  • Vidikron Vision 10 - page 46

    Operation 36 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Picture Adjust Use the contr ols in the Picture Adjust menu to calibrate your Vision 10/12 fo r optimum picture quality. The Vision 10/12 has be en designed to in corpo rate setup and calibration standards established by the Imaging Scienc e Foundation (ISF). ...

  • Vidikron Vision 10 - page 47

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 37 PRE L IMINAR Y Connect your test patter n source to the input th at you are calibrating and proceed as follo ws. Perform the adjustments in the order listed her e. Brightness : On your external test pattern source, select a PLUGE pattern. (PLUGE is an acronym for “Picture L ...

  • Vidikron Vision 10 - page 48

    Operation 38 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Contrast: On your external test patte rn source, select a stepped, gray-bar patte rn like the one shown in Figure 4-6 . Figure 4-6. Typical Gray Bar Pattern for Adjusting Contrast Select Contrast from the Picture Adjust menu. Using the left- and right-arrow ( ...

  • Vidikron Vision 10 - page 49

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 39 PRE L IMINAR Y Select Color fro m the Picture Adjust menu. While l ooking at the color bar pattern through a blue filter, adjust the color saturation level until t he outermost (gray an d blue) color bars appear to be a single shade of blue: Tint: Tint or “hue” is essenti ...

  • Vidikron Vision 10 - page 50

    Operation 40 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust sharpness, select Sharpness from the Picture Adjust menu and press ENTER . On your external test pattern sour ce, select a pa ttern like the one shown in Figure 4-8 . Adj ...

  • Vidikron Vision 10 - page 51

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 41 PRE L IMINAR Y Color Temperature: To adjust the color temperature , select Color Te mp from the Picture Adjust menu and press ENTER . (Color te mperature defines the “col or of gray.”) The range is from 5,000K to 10,00 0K, in increments of 500K. The de fault setting, 6,50 ...

  • Vidikron Vision 10 - page 52

    Operation 42 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y ICC Select: Choose ICC Select from the P icture Adjust menu to specify the color spa ce (Standard, NTSC, HDTV or PAL) that is appropriate for the source signal, t o achieve optimal color balance. If you select NTSC, HDTV or PA L, you can make further adjustme ...

  • Vidikron Vision 10 - page 53

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 43 PRE L IMINAR Y • Auto Tune: Auto Tune automatically adjusts setting s to optimize computer images. Auto Tune can be execut ed either on command or autom atically whenever an in coming RGB signal is present. To execute Auto Tune on command, select Execute Auto Tune and press ...

  • Vidikron Vision 10 - page 54

    Operation 44 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Information: Selec t Informatio n from the M ain Menu to see information a bout the current source, input reso lution, horizontal and vertical frequencies, la mp hours and the installed firmware version. Should you ever need to contact Vidikron Tec hnical Supp ...

  • Vidikron Vision 10 - page 55

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 45 PRE L IMINAR Y Keystone Correction: If the projector and screen are n ot installed perpendicular to ea ch other, the image may be come distorted in a trapezoi dal shape, as shown in Figure 4-10 . Select Keystone fr om the Installa tion menu to compensate for this. Figure 4-10 ...

  • Vidikron Vision 10 - page 56

    Operation 46 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y ISF Settings Use the ISF Setting s menu to perform advanced picture quality adjustments. This me nu should be used by ISF-certified technicians only . Several contro ls in this menu are identical to those in th e Picture Adj ust menu, but are accessible only b ...

  • Vidikron Vision 10 - page 57

    Operation Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 47 PRE L IMINAR Y ICC Adjust: Use the ICC Adjust control s to custom ize the stored NTSC, HDTV and/or PAL color space characteristics. To do t his: 1. Select ICC Adjust from the ISF Calibration menu and press ENTER . 2. Select the color space to modify us ing the left- or right- ...

  • Vidikron Vision 10 - page 58

    Operation 48 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Blue Enable: Refer to Blue Enable on page 44. Splash Screen Timer: Press the right- or left-arrow buttons to set the Splash Screen Timer. This timer controls how lo ng the startup (ISF and Vidikron logo) image stays on-scr een after you turn on the projec tor. ...

  • Vidikron Vision 10 - page 59

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 49 PRE L IMINAR Y 5.1 Cleaning the Projector • Unplug the power cord be fore cleaning the projector. • Avoid using benzene or thinner, as these ca n damage the finish on the projector exterior. • Do not use volatile agents, such as insecticides, on the projector. • Do not leave ru ...

  • Vidikron Vision 10 - page 60

    Maintenance and Troubleshooting 50 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 5.3 Cleaning the Intake and Exhaust Vents This Vision 10/12 is equipped with intake and exhaust vents to allow the flow of cool a ir through the projecto r and maintain the proper operating temperature. You should periodically clean the v ...

  • Vidikron Vision 10 - page 61

    Maintenance and Troubleshooting Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 51 PRE L IMINAR Y 5.4 Lamp Maintenance The projector lamp has a life of 2,000 hours. Maintain pro per ventilation to ke ep the lamp operating throughout its lifetime. Do not su bject the projector to unnece ssary vibration. • Lamp replacement is recommend ...

  • Vidikron Vision 10 - page 62

    Maintenance and Troubleshooting 52 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 5.6 Lamp Replacement 1. Turn off the projec tor and wait for the cooling fan to stop. 2. Unplug the power cord. Allow th e projector to cool down for approximately one hour prior to removing the lamp assembly for replacement. 3. Loosen th ...

  • Vidikron Vision 10 - page 63

    Maintenance and Troubleshooting Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 53 PRE L IMINAR Y 5.7 Troubleshooting Tips Table 5-1 provides some general guidelin es for tr oubleshooting problems you may encounter with the Visio n 10/12. If you encoun ter an issue not described here, please contact your Vidikron dea ler or Vidikron Te ...

  • Vidikron Vision 10 - page 64

    Maintenance and Troubleshooting 54 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y Notes: ...

  • Vidikron Vision 10 - page 65

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the Vision 10/12 with a home theater automati o n/control system or a PC running terminal e mulation software, conne ct it to your control syste m or PC as shown in Figure 3-11 . Configure the RS-2 32 controller o ...

  • Vidikron Vision 10 - page 66

    Serial Communications 56 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y RRD02 Selects the LETTERBOX aspect ratio RRDOK RRD03 Selects the INTELLIWIDE aspect ratio RRDOK RRD04 Selects the CINEMA (2.35:1) aspect ratio RRDOK RRD05 Selects the CINEMA FILL aspect ratio RRDOK RRE00 Turns the projector OFF RREOK PON Turns the ...

  • Vidikron Vision 10 - page 67

    Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 57 PRE L IMINAR Y 7.1 Vision 10/12 Specifications Table 7-1 lists the Vision 10/12 specifications. 7 Specifications Table 7-1. Vision 10/12 Specifica tions Projector Type: Digital Light Processing (DLP ), single-chip DMD Native Resolution: V ision Model 10: 1024 x 576 (16:9) V ision Model ...

  • Vidikron Vision 10 - page 68

    Specifications 58 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y +12V Output: 0.25 Amps, active when the projector is turned on Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 370 Watts Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity (non-condensing) Dimensions: See Figure 7-1 Wei ...

  • Vidikron Vision 10 - page 69

    Specifications Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 59 PRE L IMINAR Y 7.2 Vision 10/12 Dimensions Figure 7-1 shows th e Vision 10/12 dimension s. Figure 7-1. Vision 10/12 Dimensions 398.0mm 181.8mm 162.6mm Rear View Side View Side View Bottom View Front View 429.4mm 431.6mm 22.8mm 164.6mm 87mm 87mm 164.6mm 408.0mm 231.7mm 16 ...

  • Vidikron Vision 10 - page 70

    Specifications 60 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 7.3 Computer Signal Compatibility The Vision 10/12 can display vid eo signals from a variety of computer sources via its RGB-HD and HDMI inputs. It is compatible with the th ree most common sync mo des -- sync-on-green, composite sync and RGB with se para ...

  • Vidikron Vision 10 - page 71

    Specifications Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 61 PRE L IMINAR Y PC SVGA 800 x 600 31.4 50 √ Upscale 35.1 56 √ √ 37.9 60 √ √ 44.5 70 √ 48.1 72 √ √ 46.9 75 √ √ PC SVGA 800 x 600 53.7 85 √ √ Upscale 56.8 90 √ 64.0 100 √ PC XGA 1024 x 768 35.5 43 √ True 40.3 50 √ 48.4 60 √ √ 56.5 70 √ ...

  • Vidikron Vision 10 - page 72

    Specifications 62 Vidikron Vision Model 10/Model 12 Owner’s O perating Manual PRE L IMINAR Y 7.4 Video Signal Compatibility Table 7-3 li sts numerous common video signal formats and indi cates which input(s) on the Vision 10/12 can accept a given format. Table 7-3. Video Signal Compatibility Chart Resolution H-Freq (kHz) V-Freq (Hz) Compatible In ...

  • Vidikron Vision 10 - page 73

    ...

  • Vidikron Vision 10 - page 74

    Vidikron 2900 F aber Street Union City , CA 94587 510-324-5900 F ax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com RUMA-011175 rev. 08-14-06 v2 .0 SERIAL NUMBER ...

Manufacturer Vidikron Category Projection Television

Documents that we receive from a manufacturer of a Vidikron Vision 10 can be divided into several groups. They are, among others:
- Vidikron technical drawings
- Vision 10 manuals
- Vidikron product data sheets
- information booklets
- or energy labels Vidikron Vision 10
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vidikron Vision 10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vidikron Vision 10, service manual, brief instructions and user manuals Vidikron Vision 10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vidikron Vision 10.

Similar manuals

A complete manual for the device Vidikron Vision 10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vidikron Vision 10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vidikron Vision 10.

A complete Vidikron manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vidikron Vision 10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vidikron Vision 10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vidikron Vision 10, that we can find in the current document
3. Tips how to use the basic functions of the device Vidikron Vision 10 - which should help us in our first steps of using Vidikron Vision 10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vidikron Vision 10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vidikron Vision 10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vidikron Vision 10?

Use the form below

If you did not solve your problem by using a manual Vidikron Vision 10, ask a question using the form below. If a user had a similar problem with Vidikron Vision 10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)