English dropdown-ico

Manual Panasonic PT-LM2E

60 pages 1.32 mb
Download

Go to site of 60

Summary
  • Panasonic PT-LM2E - page 1

    ENGLISH R Before operating this product, please read the instructions carefully and save this manual for future use. LCD Pr ojector Operating Instructions Model No. PT -LM2E ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D.ZOOM STD AUTO SETUP VIDEO INPUT POWER RGB MENU TQBJ 0175-1 Commer cial Use p001-019(PT-LM2E)en 05.02.28 15:43 ページ 1 ...

  • Panasonic PT-LM2E - page 2

    2-E NGLISH IMPOR T ANT SAFETY NO TICE WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. WARNING: 1) Remove the pl ...

  • Panasonic PT-LM2E - page 3

    E NGLISH -3 Preparation IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of ...

  • Panasonic PT-LM2E - page 4

    4-E NGLISH Contents Preparation IMPORTANT SAFETY NOTICE ...2 Precautions with regard to safety .........................................5 Accessories .................................9 Before use ..................................10 Location and function of each part ...........................................12 Getting started Setting-up ......... ...

  • Panasonic PT-LM2E - page 5

    E NGLISH -5 Preparation Precautions with regar d to saf ety W ARNING If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. B Check that no more smoke is coming out, and then contact ...

  • Panasonic PT-LM2E - page 6

    6-E NGLISH Do not do anything that might damage the mains lead or the mains plug. B Do not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. B If the mains lead is used while damaged, electric shocks, short-circuits o ...

  • Panasonic PT-LM2E - page 7

    E NGLISH -7 Preparation Do not use the projector in a bath or shower. B Fire or electric shocks can result. Do not look into the lens while the projector is being used. B Strong light is emitted from the projector ’ s lens. If you look directly into this light, it can hurt and damage your eyes. B Be especially careful not to let young children lo ...

  • Panasonic PT-LM2E - page 8

    8-E NGLISH When inserting the batteries, make sure the polarities (+ and -) are correct. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Use only the specified batteries. B If incorrect batteries are used, they may explode or leak, a ...

  • Panasonic PT-LM2E - page 9

    E NGLISH -9 Preparation Card remote control unit (N2QADC000008 x1) Mains lead for Continental Europe (K2CM3DR00002 x 1) Mains lead for U.K. (K2CT3DR00005 x 1) Lithium battery for remote control unit (CR2025 x1) RGB signal cable [1.8 m (5 ´ 10 ˝ ), K1HA15DA0002 x1] Accessories Check that all of the accessories shown below have been included with y ...

  • Panasonic PT-LM2E - page 10

    10-E NGLISH Bef ore use Caution when mo ving the pr ojector Be sure to attach the lens cover before moving the projector. The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory softcase. When placing the projector inside the softcase, position it so that the lens is facing upward. Cautions ...

  • Panasonic PT-LM2E - page 11

    E NGLISH -11 Preparation Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any fluorescent lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the lens becomes d ...

  • Panasonic PT-LM2E - page 12

    12-E NGLISH Location and function of each part # Focus ring (page 23) $ Zoom ring (page 23) % Speaker & Projector control panel (Top) (page 14) ' Remote control unit holder Store the remote control unit as shown in the figure above. ( Leg adjuster buttons (L/R) (page 23) These buttons are used to unlock the front adjustable legs. Press to ...

  • Panasonic PT-LM2E - page 13

    E NGLISH -13 Preparation # Connector panel (page 16) $ Air outlet port Do not cover this port. % Air inlet port Do not cover this port. & Lamp unit holder (page 50) ' Front adjustable legs (L/R) (page 23) ( Air inlet port, Air filter (page 49) Do not cover this port. W ARNING Do not place your hands or other objects close to the air outlet ...

  • Panasonic PT-LM2E - page 14

    14-E NGLISH Menu operation <on connector panel:page 16> Remote contr ol unit $ % '( & ) ˛ # * +, FREEZE SHUTTER INDEX WINDOW PROJECT OR STD AUT O SETUP INPUT POWER MENU ENTER VIDEO RGB VOLUME D .ZOOM ' ( + - . / 0 1 2 , ) * Pr ojector contr ol panel <Top> p001-019(PT-LM2E)en 04.12.25 9:27 ページ 14 ...

  • Panasonic PT-LM2E - page 15

    E NGLISH -15 Preparation # Power indicator (pages 22, 24 and 25) This indicator illuminates red when the projector is in standby mode, and it illuminates green when a picture starts to be projected. $ TEMP indicator (page 47) This indicator illuminates if an abnormally high temperature is detected inside the projector or around it. If the temperatu ...

  • Panasonic PT-LM2E - page 16

    16-E NGLISH Connector panel # Menu operation (on connector panel) (page 14) $ RGB IN connector (pages 19 and 20) This connector is used to input RGB signals and YP B P R signals. % S-VIDEO IN connector (pages 20 and 39) This connector is used to input signals from a S-VIDEO-compatible equipment such as a video deck. The connector is S1 signal compa ...

  • Panasonic PT-LM2E - page 17

    E NGLISH -17 Getting started Setting-up Pr ojection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the “ OPTION2 ” menu. Refer to page 43 for details.) B Front-desk projection B Front-ceili ...

  • Panasonic PT-LM2E - page 18

    18-E NGLISH Pr ojector position H1 L L SH SW 63.5 (2-1/2) L: Projection distance SH: Image height SW: Image width H1: Distance from centre of lens to bottom edge of projected image Top edge of screen Screen Bottom edge of screen Screen NOTE: B The dimensions in the table above are approximate. B If you use the projection distance for the 16:9 scree ...

  • Panasonic PT-LM2E - page 19

    E NGLISH -19 Getting started Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the power supply for all peripheral devices before making any connections. B If the cables necessary for connection are not included with the peripheral device or available as an option, y ...

  • Panasonic PT-LM2E - page 20

    20-E NGLISH NOTE: B If the signal cables are disconnected or if the power supply for the computer or video deck is turned off while “D.ZOOM”(digital zoom) or “INDEX WINDOW” is being used, these functions will be cancelled. Connecting to video equipment DVD player Video deck DVD player (with component video jack) D-sub15-pin (male) - BNCx5 ( ...

  • Panasonic PT-LM2E - page 21

    E NGLISH -21 Getting started Insert the accessory lithium battery while making sure that the polarities are correct. # While pushing the battery holder tab to the right, pull out the battery holder. $ Insert the battery into the battery holder so that the + side is facing upward. % Insert the battery holder. Preparation f or the remote contr ol uni ...

  • Panasonic PT-LM2E - page 22

    T urning on the power Before turning on the power 1, Ensure that all peripheral devices are connected properly. 2, Remove the lens cover. Lens cover Mains lead Power indicator Connect the accessory mains lead to the A C IN soc ket. B The power indicator on the projector will illuminate red. Press the PO WER button. B The power indicator on the proj ...

  • Panasonic PT-LM2E - page 23

    E NGLISH -23 Basic Operation Press the input select b utton to select the input signal. Follow the procedure below when you set the projector up first, and when you change the setup place. Press the A UT O SETUP b utton to initiate automatic positioning. B The tilt of the projector and the input signal will be detected and keystone distortion and t ...

  • Panasonic PT-LM2E - page 24

    T urning off the power Power indicator Press the PO WER button. B “ POWER OFF ” is displayed on the screen. Press the I I or H H b utton to select “OK”, and then press the ENTER b utton. B The lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange while the cooling f ...

  • Panasonic PT-LM2E - page 25

    E NGLISH -25 Basic Operation Power indicator Power indicator status Red Illuminated The projector is in standby mode and image projection is possible by pressing the POWER button. A picture is being projected. The lamp is cooling down after the power is turned off. (The cooling fan is operating.) The projector is preparing for projection after the ...

  • Panasonic PT-LM2E - page 26

    26-E NGLISH Correcting ke ystone distor tion and automatic positioning (A UT O SETUP) This projector detects its degree of tilt and the input signal. Keystone distortion and the position of the image can then be corrected automatically in accordance with the input signal. ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D .ZOOM STD VIDEO INPUT PO ...

  • Panasonic PT-LM2E - page 27

    E NGLISH -27 Useful functions T urning off the picture and sound momentaril y (SHUTTER) The “ SHUTTER ” function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses less ...

  • Panasonic PT-LM2E - page 28

    28-E NGLISH ENTER INDEX WINDOW PROJECTOR VOLUME STD VIDEO INPUT POWER RGB MENU AUTO SETUP SHUTTER FREEZE D.ZOOM B The picture will then be enlarged to 1.5 times the normal size. The remote control unit functions during D.ZOOM (digital zoom) Press the F , G , I and H buttons to move the enlarged area which you want to project. Press the D.ZOOM +/- b ...

  • Panasonic PT-LM2E - page 29

    E NGLISH -29 Useful functions ENTER PROJECTOR VOLUME D .ZOOM STD MENU AUTO SETUP SHUTTER FREEZE INDEX WINDOW Still picture Mo ving picture The remote control unit functions during INDEX WINDOW Press the F or G button to select a screen size. It can switch to three stages. Still picture Moving picture Still picture Moving picture Still picture Movin ...

  • Panasonic PT-LM2E - page 30

    30-E NGLISH On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus. The general arrangement of these menus is shown below. MAIN MENU MENU KEYSTONE PICTURE POSITION INDEX WINDOW SHUTTER VOLUME LANGUAGE OPTION1 OPTION2 SECURITY SELECT ENTER EXIT PICTURE ...

  • Panasonic PT-LM2E - page 31

    E NGLISH -31 Adjustments and settings POSITION POSITION DOT CLOCK 32 CLOCK PHASE 16 ASPECT 4:3 RESIZING ON FRAME LOCK OFF STANDARD SELECT ENTER RETRN POSITION menu (page 38) When an RGB/YP B P R signal is being input POSITION POSITION ASPECT 4:3 RESIZING ON STANDARD SELECT ENTER RETRN When an S-VIDEO/VIDEO signal is being input LANGUAGE ENGLISH ENG ...

  • Panasonic PT-LM2E - page 32

    32-E NGLISH # Press the MENU button. The “ MAIN MENU ” will be displayed. $ Press the F F or G G button to select an item. Selected item will be displayed in blue. % Press the ENTER button to accept the selection. The selected menu screen or adjustment screen will then be displayed. (Example: “ PICTURE ” menu) ENTER FREEZE SHUTTER INDEX WIN ...

  • Panasonic PT-LM2E - page 33

    E NGLISH -33 Adjustments and settings & Press the F F or G G button to select an item, and then press the I I or H H button to change or adjust the setting. An individual adjustment screen such as the one shown below will be displayed for bar-scale items. The bar scale will turn green when any adjustment changes the setting from the factory set ...

  • Panasonic PT-LM2E - page 34

    34-E NGLISH Correcting ke ystone distor tion Keystone distortion is corrected automatically when the projector ’ s automatic setup function is used, but this correction will not apply if the screen itself is tilted. In such cases, you can correct the keystone distortion manually with the following procedure. Vertical keystone distortion correctio ...

  • Panasonic PT-LM2E - page 35

    E NGLISH -35 Adjustments and settings Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment. When an S-V ...

  • Panasonic PT-LM2E - page 36

    36-E NGLISH BRIGHT This adjusts the darker areas (black areas) in the picture. Black areas are too light: I button Dark areas are too solid: H button COLOR (S-VIDEO/VIDEO/YP B P R only) The colour is too deep: I button The colour is too pale: H button TINT (NTSC/NTSC 4.43/YP B P R only) This adjusts the flesh tones in the picture. The flesh tones a ...

  • Panasonic PT-LM2E - page 37

    E NGLISH -37 Adjustments and settings STILL MODE To reduce flickering of still images (vertical flicker), set “ STILL MODE ” to “ ON ” . SIGNAL MODE (RGB/YP B P R only) This displays the type of signal which is currently being projected. Refer to the table on page 58 for details on each type of signal. sRGB is an international colour reprod ...

  • Panasonic PT-LM2E - page 38

    38-E NGLISH Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment. When an RGB/YP B P R signal is being ...

  • Panasonic PT-LM2E - page 39

    E NGLISH -39 Adjustments and settings S4:3 The size of the input signal is compressed to 75% and projected. (This is useful for projecting a picture with a 4:3 aspect ratio onto a 16:9 screen.) AUTO (S-VIDEO only) When an S1 video signal is being input, the aspect ratio is changed automatically to project a 16:9 picture. 4:3 The input signal is pro ...

  • Panasonic PT-LM2E - page 40

    40-E NGLISH RESIZING This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 58 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pix ...

  • Panasonic PT-LM2E - page 41

    E NGLISH -41 Adjustments and settings Changing the displa y langua ge Press the F or G button on the projector or remote control unit to select a language, then press the ENTER button to accept the setting. Indicates the language which is currently set. LANGUAGE ENGLISH ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELECT ENTER RETRN p040-060(PT-LM2E ...

  • Panasonic PT-LM2E - page 42

    42-E NGLISH Press the F or G button on the projector or remote control unit to select an item, then press the I or H button to change the setting. OSD ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. A UT O SIGNAL This s ...

  • Panasonic PT-LM2E - page 43

    E NGLISH -43 Adjustments and settings V GA60/525P When a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal. SXGA MODE This setting is only for an SXGA signal. SXGA Select this item normally. SXGA+ When the edges of the projected image are not visible, select this item. Noise Reduction (NR) (S-VIDEO/VIDEO ...

  • Panasonic PT-LM2E - page 44

    44-E NGLISH projector in small rooms where high luminance is not required, it is recommended that you set the “LAMP POWER” to “LOW”. LAMP R UNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 51, and reset “LAMP RUNTIME” to “0”. FU ...

  • Panasonic PT-LM2E - page 45

    E NGLISH -45 Adjustments and settings Setting up the security function This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image. Press the F or G button on the projector or remote control unit to select “SECURITY”, then press ...

  • Panasonic PT-LM2E - page 46

    46-E NGLISH TEXT DISPLA Y The setup letters can be displayed at the bottom of the projected image while an image is projected. ON “TEXT DISPLAY” is enabled. OFF “TEXT DISPLAY” is disabled. TEXT CHANGE The setup letters which will be displayed when “TEXT DISPLAY” is set to “ON” can be changed. Press the ENTER button to display the ? ...

  • Panasonic PT-LM2E - page 47

    E NGLISH -47 Care and maintenance When the TEMP indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you noti ...

  • Panasonic PT-LM2E - page 48

    48-E NGLISH Remedy Problem Indicator display Flashing (red) It is nearly time to replace the lamp unit. Illuminated (red) An abnormality has been detected in the lamp circuit. B Does “REPLACE LAMP” appear on the screen after the projector is turned on? B This occurs when the operation time for the lamp unit is nearing 1 800 hours (when “LAMP ...

  • Panasonic PT-LM2E - page 49

    E NGLISH -49 Care and maintenance Cleaning and replacing the air filter If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will flash and the projector power will turn off. The air filter should be cleaned every 100 hours of use. % Replace the air filter, and then install the air fil ...

  • Panasonic PT-LM2E - page 50

    50-E NGLISH Replacing the lamp unit W arning When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and contact with it can cause burns. Notes on replacing the lamp unit B The light generating lamp is made of glass, so dropping it or allowing it to hit hard objects may cause it to burst. ...

  • Panasonic PT-LM2E - page 51

    E NGLISH -51 Care and maintenance Lamp unit replacement procedure # Disconnect the mains lead from the projector by following the procedure on page 24, and check that the area around the lamp unit has cooled down. $ Use a Phillips screwdriver to turn the lamp unit cover fixing screws at the bottom of the projector, and then remove the lamp unit cov ...

  • Panasonic PT-LM2E - page 52

    52-E NGLISH + Press the ENTER button to display the “OPTION2” menu, and then press the F or G button to select “LAMP RUNTIME”. , Press and hold the ENTER button for approximately 3 seconds. The “LAMP RUNTIME” will change to “TIME RESET [POWER OFF]”. - Turn off the power. This will reset the cumulative usage time for the lamp unit to ...

  • Panasonic PT-LM2E - page 53

    E NGLISH -53 Care and maintenance Bef ore calling f or service Before calling for service, check the following points. Problem Possible cause Page Power does not turn on. No picture appears. The picture is fuzzy. The colour is pale or grayish. No sound can be heard. The remote control unit does not operate. The buttons on the projector do not funct ...

  • Panasonic PT-LM2E - page 54

    54-E NGLISH The picture does not display correctly. Picture from computer does not appear. Problem Possible cause B The signal format (“TV-SYSTEM”) may not be set correctly. B There may be a problem with the video tape or other signal source. B A signal which is not compatible with the projector may be being input. B The cable may be too long. ...

  • Panasonic PT-LM2E - page 55

    E NGLISH -55 Care and maintenance Bef ore carrying out cleaning and maintenance, be sure to disconnect the mains plug fr om the mains soc ket. Wipe the cabinet with a soft, dry cloth. If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. ...

  • Panasonic PT-LM2E - page 56

    56-E NGLISH Specifications Power supply: 100 V – 240 V ~, 50 Hz/60 Hz Power consumption: 180 W [During standby (when fan is stopped): Approx. 5 W] Amps: 2.2 A – 1.0 A LCD panel: Panel size (diagonal): 0.55 type (13.97 mm) Aspect ratio: 4:3 Display method: 3 transparent LCD panels (RGB) Drive method: Active matrix method Pixels: 480 000 (800 x 6 ...

  • Panasonic PT-LM2E - page 57

    E NGLISH -57 Others VIDEO IN: Single-line, RCA pin jack 1.0 V [p-p], 75 Ω S-VIDEO IN: Single-line, Mini DIN 4-pin Y 1.0 V [p-p], C 0.286 V [p-p], 75 Ω AUDIO IN: Single-line, RCA pin jack x 2 (L-R) 0.5 V [rms] Cabinet: Moulded plastic (PC/ASA) Dimensions: Width: 257 mm (10-3/32˝) Height: 69 mm (2-11/16˝) Length: 209 mm (8-7/32˝) (without lens ...

  • Panasonic PT-LM2E - page 58

    58-E NGLISH Appendix *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected. B Some loss of data occurs to make projection easier. *3 Si ...

  • Panasonic PT-LM2E - page 59

    E NGLISH -59 Others Connector pin wiring B The pin layout and signal names for the S-VIDEO IN connector are shown below. Pin No. Signal # Earth (Luminance signal) Earth (Colour signal) Luminance signal Colour signal $ % & B The pin layout and signal names for the RGB IN connector are shown below. Pin No. Signal # R/P R G/G·SYNC/Y B/P B SDA $ % ...

  • Panasonic PT-LM2E - page 60

    60-E NGLISH T rademark ac kno wledgements B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh is a registered trademark of Apple Computer, Inc. B S-VGA is a registered trademark of the Video Electronics Standards Association. All other trademarks are the property of the various trademark owners. Dimensions <U ...

Manufacturer Panasonic Category Projector

Documents that we receive from a manufacturer of a Panasonic PT-LM2E can be divided into several groups. They are, among others:
- Panasonic technical drawings
- PT-LM2E manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic PT-LM2E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic PT-LM2E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic PT-LM2E, service manual, brief instructions and user manuals Panasonic PT-LM2E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic PT-LM2E.

Similar manuals

A complete manual for the device Panasonic PT-LM2E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic PT-LM2E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic PT-LM2E.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic PT-LM2E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic PT-LM2E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic PT-LM2E, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic PT-LM2E - which should help us in our first steps of using Panasonic PT-LM2E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic PT-LM2E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic PT-LM2E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic PT-LM2E?

Use the form below

If you did not solve your problem by using a manual Panasonic PT-LM2E, ask a question using the form below. If a user had a similar problem with Panasonic PT-LM2E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)