English dropdown-ico

Manual Renesas H8/36912

35 pages 0.25 mb
Download

Go to site of 35

Summary
  • Renesas H8/36912 - page 1

    Revision Date: Jun. 22, 2005 Renesas Micro computer Devel opment Environme nt System H8 Fam ily / H 8/300 H Tiny Series HS36902ECH61HE Rev.1.00 H8/36912, H8/36902 Gro up FP-32A User System Interface Cable HS36902ECH61H User’s Manual REJ10B0198-0100 ...

  • Renesas H8/36912 - page 2

    ...

  • Renesas H8/36912 - page 3

    1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp ...

  • Renesas H8/36912 - page 4

    ...

  • Renesas H8/36912 - page 5

    I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy for future reference. Do not attempt to use the user sys tem interface cable until you fully understand its mechanism. User Syst em Interf ace Cab le: Throughout this docume nt, the term "user ...

  • Renesas H8/36912 - page 6

    II LIMITED WARRANTY Renesas warrants its user system interfa ce cabl es to be manufactured in accordance with published specifications and fr ee from defects in material and/or workmanship. Renesas will repair or replace any user system interfac e cables determined to be defective in material and/or workmanship. User syst em interface cables are w ...

  • Renesas H8/36912 - page 7

    III State Law : Some states do not allo w the exclusion or limitation o f implied warranties or liab ility for incidental or c onsequentia l damages, so the above li mitation or exclusion may not appl y to you. This warrant y gives you s pecifi c legal rights , and yo u may have ot her rights which ma y vary fr om state to state. The Warranty is Vo ...

  • Renesas H8/36912 - page 8

    IV SAFETY PAGE READ FIRST • READ this user's manual before using this user system interface cable. • KEEP the user's manual handy for future reference. Do not attempt to use the user sys tem interface cable until you fully understand its mechanism. DEFINITION OF SI GNAL WORDS This is the safety alert symb ol. It is u sed to al ert you ...

  • Renesas H8/36912 - page 9

    V W ARNING Observe the pr ecautions listed b elow. Failure to do so will result in a FIRE H AZARD and will damage the user system and the emul ator product or will result in PERSONAL INJURY. The USER PROGRA M will be LOST. 1. Do not repair or remodel the emul ator product by yourself for elect ric shock prevention and qualit y assurance. 2. Always ...

  • Renesas H8/36912 - page 10

    VI ...

  • Renesas H8/36912 - page 11

    i Preface Thank you for purchasing this user s y stem interface cable (HS36902ECH61H) for the Renesas ’ original microcomput er H8/36912, H8/36902 group. The HS36902ECH61H is a us er system interface cable that connects an H8/36912, H8/36902 group E6000 emulator (HS3664EP I61H or HS3664EPI62H; hereinafter referred to as t he emulator) to the IC s ...

  • Renesas H8/36912 - page 12

    ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connecting User System Interface C able to Emulator Station ......................................... 3 2.2 Connectin ...

  • Renesas H8/36912 - page 13

    1 Section 1 Configuration CAUTION Use an NQPACK 032SA socket (manufact ured by Tokyo Eletech Corporation) for the FP-32A package IC socket on the user system. Figure 1 shows the configuration of the HS 36902ECH61H user system interface cable for the FP-32A package. User system IC socket Cable head Screws (M2 x 10 mm) (for fastening cable head) Scre ...

  • Renesas H8/36912 - page 14

    2 Table 1 list s the HS36902EC H61H components. Pl ease make sure you have all of these components when unpacking. Table 1 HS36902ECH61H Com ponents No. Component Quantity Remarks 1 Cable body 1 Coaxial cable 2 Cable head 1 3 IC socket 1 For the FP-32A package 4 Socket cover 1 For installing an FP-32A-packaged MCU 5 Screws (M2 x 10 mm ) 4 For faste ...

  • Renesas H8/36912 - page 15

    3 Section 2 Connection Procedures 2.1 Connecting User System Interface Cable to Emulator Station W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user syst em ...

  • Renesas H8/36912 - page 16

    4 E6000 Emulator station User system interface cable CTS screws (M3 x 6 mm) Cable body connector Figure 2 Connecting User System Interface Cable to E mulator Station ...

  • Renesas H8/36912 - page 17

    5 2.2 Connecting User System Interface Cable to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE CABLE is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage ...

  • Renesas H8/36912 - page 18

    6 2.2.1 Installing IC So cket After checking the location of pin 1 on the IC socket fasten it to the us er system before soldering. CAUTION After confirming the locat ion of pin 1 on the IC socket, apply epoxy resin adhesive to the end of t he four projections at the bott om of the IC socket, and fasten it to the user system. Use the guide pins pro ...

  • Renesas H8/36912 - page 19

    7 CAUTION Be sure to completely solder th e leads so that th e solder slops gently over the leads and forms solder fillets. (Use slightly more solder than the MCU.) 2.2.2 Inserti ng Cable Head CAUTION Check the location of pin 1 before inserting. Align pin 1 on the IC socket for an FP-32A package on the user s ystem with pi n 1 on the user system i ...

  • Renesas H8/36912 - page 20

    8 Fasten the user sys tem interface cable head to the IC socket for an FP-32A package on the user system with the two screws (M2 x 10 mm) provided. Each screw should be tightened a little at a time, alternati ng between screws on opposing corners. Take s p ecial care, such as manually securing the IC socket s oldered area, to prevent the soldered I ...

  • Renesas H8/36912 - page 21

    9 2.2.4 Fastening C able Body Connect the cable body t o the cable head. Cable head Remove jig User system Push the unfastening jigs. Removing Cable body Figure 5 Fastening Cable Body ...

  • Renesas H8/36912 - page 22

    10 2.3 Recommended Dimensions for User System Mount Pad Figure 6 shows the recommended dimensions for the mount pad (footpri n t) for the user system with an IC s ocket for an FP-32A package (NQP ACK032SA: manufactured by Tokyo Eletech Corporation). Note t h at the dimensions in figure 6 are somew hat different from those of t he actual chip's ...

  • Renesas H8/36912 - page 23

    11 2.4 Dimensions for User System Interface Cable Head The dimensions for the user s ystem interface cable head are shown in figure 7. Unit: mm Tolerance: ± 0.5 mm 76.2 66.0 24.6 16.7 29.7 16.7 Figure 7 Dimensions for User System In terface Cable Head ...

  • Renesas H8/36912 - page 24

    12 2.5 Resulting Dimensions after Connecting User System Interface Cable The resulting dimensions, after connecting the user s y stem interface cable head to the user system, are shown in figure 8. 19.7 29.2 IC socket (NQPACK032SA manufactured by Tokyo Eletech Corporation) Cable head User system Unit: mm Tolerance: ±0.5 mm Figure 8 Resulting Dimen ...

  • Renesas H8/36912 - page 25

    13 Section 3 Installing the MCU to the User System CAUTION 1. Check the location of pin 1 before inserting. 2. Use the screwdriver provided for t ightening screws. 3. The tightening torque must be 0.098 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the f orce required to turn the screw becomes significantl ...

  • Renesas H8/36912 - page 26

    14 MCU Pin 1 IC socket (NQPACK032SA manufactured by Tokyo Eleteck Corporation) User system Screws (M2 x 6 mm) Socket cover Figure 9 Installing MCU to User System ...

  • Renesas H8/36912 - page 27

    15 Section 4 Verifying Operation 1. Turn on the emulator according to the procedures described in the H8/3664 E6000 Emulator User’s Manual (HS3664EPI61HE-U2 or HS 3664EPI62HE-U2). 2. Verify the user system interface cable connections by access ing ports and checking the bus states of the pins. If an error is detected, recheck the soldered IC sock ...

  • Renesas H8/36912 - page 28

    16 Figure 10 sh ows the system clock o scillator on the user sy stem in terface cab le and the sub clock input specificat ions. R2 270 Ω R1 1 M Ω HCU04 HCU04 To E6000 emulator To E6000 emulator OSC1 OSC2 System clock oscillator Subclock oscillator R6 470 k Ω R5 3.3 M Ω HCU04 HCU04 HCU04 HCU04 X1 X2 R13 10 k Ω R12 2.2 k Ω Figure 10 Syst ...

  • Renesas H8/36912 - page 29

    17 Section 5 Notice 1. Make sure that pin 1 on the user sys tem IC socket is correctly ali gned with pin 1 on the cable head before inserting the cable head into the user syst em IC socket. 2. The dimensions of the recommended mount pad for t he user system IC socket are different from those of the MCU . 3. This user system interface cable is s pec ...

  • Renesas H8/36912 - page 30

    18 6. The P1 short connector is us ed for testing. Do not remove the inse rted jumper pin. P1 1 3 Figure 12 P1 Short Connector ...

  • Renesas H8/36912 - page 31

    19 7. SW1 and SW2 are us ed to switc h OSC2 or PC 1 and OSC1 or PC0. Turn SW1 and S W2 to the OSC1 and OSC2 sides , respectively, when they are used as OSC1 and OSC 2. Turn SW1 and SW2 to the PC 0 and PC1 sides, respecti v ely, when they are used as PC0 and PC 1. At shipment, SW 1 and SW2 are turned to t he OSC1 and OSC 2 sides. The emulator does n ...

  • Renesas H8/36912 - page 32

    20 ...

  • Renesas H8/36912 - page 33

    Renesas Microcomputer Development Environment System User's Manual H8/36912, H8/36902 Group FP-32A User System Interface Cable HS36902ECH61H Publication Date: Rev.1.00, June 22, 2005 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Technical Documentation & Information Department Renesas Kodaira Semiconductor ...

  • Renesas H8/36912 - page 34

    Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) ...

  • Renesas H8/36912 - page 35

    H8/36912, H8/369 02 Grou p FP-32A User System Interface Cable HS36902E CH61H User’s Manual ...

Manufacturer Renesas Category Computer Hardware

Documents that we receive from a manufacturer of a Renesas H8/36912 can be divided into several groups. They are, among others:
- Renesas technical drawings
- H8/36912 manuals
- Renesas product data sheets
- information booklets
- or energy labels Renesas H8/36912
All of them are important, but the most important information from the point of view of use of the device are in the user manual Renesas H8/36912.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Renesas H8/36912, service manual, brief instructions and user manuals Renesas H8/36912. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Renesas H8/36912.

Similar manuals

A complete manual for the device Renesas H8/36912, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Renesas H8/36912 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Renesas H8/36912.

A complete Renesas manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Renesas H8/36912 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Renesas H8/36912, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Renesas H8/36912, that we can find in the current document
3. Tips how to use the basic functions of the device Renesas H8/36912 - which should help us in our first steps of using Renesas H8/36912
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Renesas H8/36912
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Renesas H8/36912 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Renesas H8/36912?

Use the form below

If you did not solve your problem by using a manual Renesas H8/36912, ask a question using the form below. If a user had a similar problem with Renesas H8/36912 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)