English dropdown-ico

Manual Pelco C1303M-B

12 pages 0.64 mb
Download

Go to site of 12

Summary
  • Pelco C1303M-B - page 1

    ® ExSite ™ Series Explosionproof Camera Module INSTALLATION C1303M-B (5/05) ...

  • Pelco C1303M-B - page 2

    ...

  • Pelco C1303M-B - page 3

    C1303M-B (5/05) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 6. T o reduce the risk of ignition of hazardous atmospheres, disconnect the equipment from ...

  • Pelco C1303M-B - page 4

    4 C1303M-B (5/05) Getting Started Thank you for purchasing Pelco’ s ExSite ™ Series explosionproof integrated positioning system. This manual includes instructions for installing the camera module for the ExSite Series system. For complete system installation instructions, refer to the installation manual placed in the pan and tilt box. Once th ...

  • Pelco C1303M-B - page 5

    C1303M-B (5/05) 5 Installation To install the camera module do the following: 1. Refer to Figure 1. Loosen the set screw at the back of the enclosure with the provided 1.5 mm Allen wrench. Figure 1. Loosen Setscrew 2. Use the supplied spanner wrench to loosen the back of the camera enclosure (refer to Figure 2). Once the back is loose, use your han ...

  • Pelco C1303M-B - page 6

    6 C1303M-B (5/05) 3. Slide the camera module into the enclosure. Refer to Figure 3 to position the camera module properly in the enclosure. Carefully mate the camera’ s power connector to the mating connector located inside the enclosure. Only models with wipers: The tab located inside the enclosure must be pointing down before installing the cam ...

  • Pelco C1303M-B - page 7

    C1303M-B (5/05) 7 4. Refer to Figure 5 and do the following to install the arm of the wiper: a. Place the supplied green bushing on the stud located behind the handle of the camera module. The bushing should be in the same orientation as shown in Figure 5. b. Install the wiper arm. Place the ridge of the arm in the notch of the enclosure tab and th ...

  • Pelco C1303M-B - page 8

    8 C1303M-B (5/05) Maintenance CAMERA MODULE REPLACEMENT The ExSite camera module can be replaced only with a camera module with the same model number . If a different camera model is installed in an existing system, the system will not function and a message to contact the Pelco factory will appear on the screen. To replace the camera module do the ...

  • Pelco C1303M-B - page 9

    C1303M-B (5/05) 9 3. For models with wipers, also remove the wiper arm and the green bushing from the unit (see Figure 7). 4. Slide the camera module out of the enclosure. 5. Install the new camera module by doing the following: Slide the camera module into the enclosure. Refer to Figure 8 to position the camera module properly in the enclosure. Ca ...

  • Pelco C1303M-B - page 10

    10 C1303M-B (5/05) 6. Refer to Figure 7 and do the following to reinstall the arm of the wiper: a. Reinstall the green bushing on the stud located behind the handle of the camera module. b. Reinstall the wiper arm. Place the ridge of the arm in the notch of enclosure tab and the slot of the arm over the green bushing. 7. Secure the camera module an ...

  • Pelco C1303M-B - page 11

    C1303M-B (5/05) 11 Specifications *Manual control of camera setup functions can be done with CM6700, CM6800, CM8500, CM9500, CM9740, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500 controllers, but not with CM7500, MPT9000, or KBD9000 controllers. Camera Day/Night (23X) Color LowLight ™ (22X) Color Signal Format NTSC, P AL NTSC, P AL Scann ...

  • Pelco C1303M-B - page 12

    W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Home Security System

Documents that we receive from a manufacturer of a Pelco C1303M-B can be divided into several groups. They are, among others:
- Pelco technical drawings
- C1303M-B manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco C1303M-B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco C1303M-B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco C1303M-B, service manual, brief instructions and user manuals Pelco C1303M-B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco C1303M-B.

Similar manuals

A complete manual for the device Pelco C1303M-B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco C1303M-B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco C1303M-B.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco C1303M-B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco C1303M-B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco C1303M-B, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco C1303M-B - which should help us in our first steps of using Pelco C1303M-B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco C1303M-B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco C1303M-B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco C1303M-B?

Use the form below

If you did not solve your problem by using a manual Pelco C1303M-B, ask a question using the form below. If a user had a similar problem with Pelco C1303M-B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)