-
Electrolux 76639 - page 1
ÖKO-LAVAMA T 76639 update The envir onmentally friendly washing machine User information ...
-
Electrolux 76639 - page 2
2 Dear Customer , Please read this instruction book car efully before using the appliance. Please ensure you fully under stand the safety instructions on the fir st pages of this instruction book. Retain the instruction book for futur e refere nce, and pass it on to any future owner s. 1 The warning triangle and / or key words ( Warn in g ! , Cauti ...
-
Electrolux 76639 - page 3
Contents 3 CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Electrolux 76639 - page 4
Contents 4 Program tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Separate conditioning / s tarching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 ...
-
Electrolux 76639 - page 5
Contents 5 Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Inle ...
-
Electrolux 76639 - page 6
Operating Instructions 6 OPER ATING INSTRUCTIONS 1 Safety The safety features of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law . However , we also consider it our obligation as a manufacturer to inform you about the following safety information. Prior to initial start-up • Obser ve the &quo ...
-
Electrolux 76639 - page 7
Operating Instructions 7 Child Safety • Packaging materials (e.g. films, styr ofoam) can be dangerous for chil- dren. Ther e is a risk of suffocation! Keep all packaging well away from children. • This appliance is designed to be oper ated by adults. Do not allow children to tamper with the controls or play with the appliance. • P ets and chi ...
-
Electrolux 76639 - page 8
Operating Instructions 8 2 Disposal Packaging Dispose of the packaging material correctly . All packaging materials used are envir onmentally friendly and can be disposed of without any danger to the environment. • Plastic parts can be recycled and ar e identified as follows: • Cardboard packaging is manufactur ed from r ecycled paper and shoul ...
-
Electrolux 76639 - page 9
Operating Instructions 9 Description of the Appliance Fr ont view Deter gent dispenser drawer Detergent dispenser drawer Main door Screw feet (height-adjustable); rear left: Automatic adjustment foot. Control panel Flap in front of drain pump Rating plate (behind door) Pre-wash detergent / soaking agent or water softening agent if used. Main wash d ...
-
Electrolux 76639 - page 10
Operating Instructions 10 Contr ol panel Pr ogram selector The progr am selector defines the nature of the washing cycle (e.g. water level, drum movement, number of rinses, spin speed) to suit the type of washing, as well as the washing solution. OFF Switches the washing machine off, the machine is switched on at all other positions. COTT ONS / LIN ...
-
Electrolux 76639 - page 11
Operating Instructions 11 EASY -CARES Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to 60 °C. EASY IRON position: Main washing cycle at 40 °C for easy-car e fabrics which, with the aid of this progr am, only requir e a gentle iron, if any ironing at all. DELICATES Main washing cycle for delicates at 30 °C or 40 °C. WOOL P ...
-
Electrolux 76639 - page 12
Operating Instructions 12 Pr ogram option buttons The progr am options buttons are used to adapt the washing progr am to suit the degree of soiling of the washing. Progr am options are not requir ed for normally soiled wa shing. The different functions can be combined together depending on the progr am. PRE WASH Warm pr e-wash before the main washi ...
-
Electrolux 76639 - page 13
Operating Instructions 13 Consumption data and wash times The values given in the following table for selected progr ams wer e calculated under standard conditions. They pr ovide a useful guide for operation in the home. What does UPDA TE mean? The control system of your machine is fully electronic. The software which determines this control system ...
-
Electrolux 76639 - page 14
Operating Instructions 14 Befor e the first wash 0 Run a washi ng cycle without w ashing (CO TTONS 95, with half the amount of detergent). This removes any residues fr om the drum which may have been left during manufacturing. Pr eparing a W ash Load Sorting and pr eparing a wash load • Sort washing according to the care symbol and type (see &quo ...
-
Electrolux 76639 - page 15
Operating Instructions 15 W ashing Types and Car e Symbols The car e symbols help you chose the correct washing pr ogram. W ashing should be sorted according to type and car e symbol. The te mperatur es indicated in the car e symbols are the maximum temper atures. Cottons ç Fabrics made fr om cotton and linen with this care symbol will with- stand ...
-
Electrolux 76639 - page 16
Operating Instructions 16 Deter gents a nd Conditioners Which deter gent and conditioner ? Use only deter gents and conditioner s which are su itable for use in automatic washing machines. Always follow the manufacturer's instructions. How much deter gent and conditioner ? The requir ed quantity depends upon: • the extent of soiling of the w ...
-
Electrolux 76639 - page 17
Operating Instructions 17 Running a washing cycle Brief instructions A washing cycle consists of the following steps: 0 1. Set the correct washing pr ogram: – Select the progr am and temperatur e with the program selector . – Select any progr am options if requir ed. 2. If necessary, change the spin speed / select RINSE HOLD. 3. Set the DELA Y ...
-
Electrolux 76639 - page 18
Operating Instructions 18 2. If requir ed, select progr am option(s): The indicator of the progr am selecte d lights up. – To change the selection pr ess another button. – To cancel a selection, pr ess the button again. Changing the spin speed/Selecting Rinse Hold 0 If necessary , change the spin speed for the final spin / select RINSE HOLD: Pr ...
-
Electrolux 76639 - page 19
Operating Instructions 19 Setting the delay timer / soaking dur ation Delay timer The DELA Y TIMER button allows the start of a washing progr am to be delayed by 1 hour up to a maximum of 19 hour s. 0 To do this, press the DELA Y TIMER button repeatedly until the desir ed start delay is shown in the multi display , for example 12h for a 12 hour del ...
-
Electrolux 76639 - page 20
Operating Instructions 20 Opening and closing the door 0 Open: Pull the handle on the door . 0 Close: Press the door firmly closed. The displays DOOR and START/P AUSE show when the appliance is switched on whether the door can be opened: 3 If – the display DOOR flashes red, – then the error code E4 0 flashes in the multi display , – and the M ...
-
Electrolux 76639 - page 21
Operating Instructions 21 Add deter gent / conditioner 3 For instructions concerning deter gent and conditioner s, see "Detergents and conditioners". 0 1. Open the detergent dispenser dr awer . press in the flap on the drawer so as to be able to grasp the handle(1), and pull out the dr awer (2). 2. Adding detergent / conditioner 3. Push t ...
-
Electrolux 76639 - page 22
Operating Instructions 22 Starting the washing pr ogram 0 1. Check that the water tap is open. 2. Start the washing progr am: Press the ST ART / PAUSE button The washing progr am is started or starts at the end of the time delay set. 3 If the DOOR display flashes red when the START / PAUSE button is pressed, the door is not pr operly closed. – Th ...
-
Electrolux 76639 - page 23
Operating Instructions 23 Multi-display The expected time remaining (in minutes) to the end of the pr ogram is displayed in the multi display . 3 The counting down of the r emaining time may be stopped or corrected by the washing machine controller as a r esult of automatic adjustments to the progr am (amount of washing, washing type, imbalance det ...
-
Electrolux 76639 - page 24
Operating Instructions 24 W ashing cycle is complete/Removing the washing. Once the washing program has come to an end, END illuminates on the progr am progr ess display . If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes. 0 1. After a rinse hold, the water must fir st be pumped out: – Either press the START / PAUSE b ...
-
Electrolux 76639 - page 25
Operating Instructions 25 Pr ogram tables Wa sh i n g Not all possible settings ar e listed below , only those which are useful and meaningful in everyday use. This machine is capable of washing 5.5 kg, however , to achieve opti- mum wash results it is r ecommended that the wash loads quoted in this instruction book are adher ed to. Typ e o f wa sh ...
-
Electrolux 76639 - page 26
Operating Instructions 26 Separ ate conditioning / starching Separate rinse Separate spin Typ e o f wa sh in g Max. Load (dry weight) Progr am selector Cottons / linen 5k g STARCHING Typ e o f wa sh in g Max. Load (dry weight) Progr am selector Cottons / linen 5k g GENTLE RINSE Easy-car es 2.5 kg Delicates 2.5 kg Woollens / Hand W ash 2k g Typ e o ...
-
Electrolux 76639 - page 27
Operating Instructions 27 Maintenance and Cleaning Contr ol panel Important! Do not use househol d furniture polish or abrasive cleaner s to clean panel and operating parts. 0 Wipe over the operating panels with a damp cloth. Use warm water . Deter gent Dispenser Drawer The detergent dispenser dr awer should be cleaned from time to time. 0 1. Pull ...
-
Electrolux 76639 - page 28
Operating Instructions 28 7. Use a brush to clean the entire compartment area of the washing machine, particularly also the nozzles on the top side of the compartment. 8. Set the deter gent dispensing drawer into the guide tr acks and push it in. Wa sh i n g Ma c h i n e D ru m The washing machine dru m is made from rust-fr ee stainless steel. Any ...
-
Electrolux 76639 - page 29
Operating Instructions 29 Cleaning the dr ain pump P aper clips, nails and so on can sometimes get into the washing machine with the washing and r emain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the dr ain pump. Therefor e the drain pump should be cleaned at least once a year . 1 Warning! Switch off t ...
-
Electrolux 76639 - page 30
Operating Instructions 30 What to do if... T rouble Shooting If the appliance is not working correctly , please carry out the following checks before contacting your local AEG Service Force Centr e. Important: If you call out an engineer to a fault listed below , or to repair a fault caused by incorrect use or installation, a charge will be made ev ...
-
Electrolux 76639 - page 31
Operating Instructions 31 The washing machine vibrates durin g opera- tion or is un stable. The machine is not level. Adjust the feet accor ding to the installation and connec- tion instructions. There is very l ittle washing in the drum (e.g. only one dressing gown). This does not impair the oper ation of the machine. The water could no t be com- ...
-
Electrolux 76639 - page 32
Operating Instructions 32 Washing heavily creased Proba bly too much washing put in the drum. P ay attention to the maxi- mum load quantity (see Pr o- gram ta bles). In the case of easy-car e fabrics, select the EASY IRON pr ogram. The washing is not suf- ficiently spun. Water is left in the drum. The fault code E20 appear s . The RINSE display fla ...
-
Electrolux 76639 - page 33
Operating Instructions 33 If the washing r esults are not satisfactory If the washing turns greyish and limescale deposits are pr esent in the drum • Insufficient detergent has been added. • Incorrect deter gent was used. • Stains were not pre-tr eated. • Progr am or temperatur e was not set correctly . • If using modular detergents, the ...
-
Electrolux 76639 - page 34
Operating Instructions 34 Carrying out an emer gency emptying • If the washing machine no longer pumps out the water , emergency emptying must be carried out. • If the washing machine is located in a room in which below fr eezing temperatur es might occur , emergency emptying must be carried o ut. Furthermore: unscr ew the inlet hose from the w ...
-
Electrolux 76639 - page 35
Operating Instructions 35 When the water is completely drained: 6. Push the plug secur ely into the emergency emptying hose and turn it clockwise to secure it. 7. Replace the emergency emptying hose in its holder . 8. Put on the flap and close. Additional Rinse (RINSE+) The washing machine is set for very economical water consumption. However , for ...
-
Electrolux 76639 - page 36
Operating Instructions 36 Child Safety Featur e If the child safety featur e is set, the door cannot be closed and no washing progr am can be started. Setting the child safety feature 0 Use a coin to turn the rotary knob on the inside of the door clock- wise as far as it will go. 1 Warning! The rotary knob must not be in a vertical position after a ...
-
Electrolux 76639 - page 37
Installation and connec tion instructions 37 INSTALLATION AND CONNECTION INSTRUCTIONS Installation Safety Pr ecautions • When moving do not tilt the washing machine onto its front or onto its right hand side (viewed fr om the front). This is to pr event the pos- sibility of the electronic components becoming wet. • Before installation inspect t ...
-
Electrolux 76639 - page 38
Installation and connection instructions 38 Installation of the appliance T ransporting the appliance • Do not place the washing machine on its front or on its right hand side (viewed from the fr ont). This is to prevent the possibility of the electronic components becoming wet. • Never transport the unit without the transport packaging and bol ...
-
Electrolux 76639 - page 39
Installation and connec tion instructions 39 3 The special spanner (E) and the caps (D) (2 each) and (G) (1 each) are supplied with it. 3. Remove the two screws (A) with the special spanner . 4. Remove the 4 screws (B). 5. Remove the transit bar (C). 6. Screw the 4 screws (B) back in for safe keeping. 7. Close the 2 large holes with the caps (D). I ...
-
Electrolux 76639 - page 40
Installation and connection instructions 40 Installation-Site pr eparation • The installation surface must be clean, dry and level. Do not install on a deep pile carpet. • Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the ...
-
Electrolux 76639 - page 41
Installation and connec tion instructions 41 Levelling the appliance 3 Self adjusting foot: The rear foot of your washing machine is designed like a spring leg. This makes the machine very stable even at high spin speeds. If the washing machine is still not stable during spinning, proceed as follows: 0 1. Set the thr ee adjustable feet to the nomin ...
-
Electrolux 76639 - page 42
Installation and connection instructions 42 Electrical Connection Any electrical work requir ed to install this appliance should be car ried out by a qualified electrician or competent person. 1 WARNING - THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make s ...
-
Electrolux 76639 - page 43
Installation and connec tion instructions 43 1 WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely. P erm anent Connection In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supp ...
-
Electrolux 76639 - page 44
Installation and connection instructions 44 W ater connection 3 The washing machine is provided with safety devices pr eventing back- contamination of the water supply and complies with local water authority requir ements. This appliance is designed to be permanently plumbed into your home ’ s water supply . Before connecting up the machine to ne ...
-
Electrolux 76639 - page 45
Installation and connec tion instructions 45 Inlet Hose Connection A pressur e hose of 1.35m in length is supplied. If a longer inflow hose is requir ed, only a VDE-approved, complete set of hoses with fitted hose scr ew connections is pe rmissible, available from AEG Service For ce Centres. – Hose sets in lengths of 2. 2 m, 3.5 m, and 5 m are av ...
-
Electrolux 76639 - page 46
Installation and connection instructions 46 Wa te r D ra i na g e The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed usin g the plastic “ U-Piece “ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring ther e is an air break between the dr ain hose ...
-
Electrolux 76639 - page 47
Installation and connec tion instructions 47 If you intend the dr ain hose from the washing machine to empty into a sink, make sure tha t the sink is empty and the plug hose is not blocked. Use the plastic “ U-Piece “ supplied. Important! The end o f the drainage hose must not be submerged in the pumped-out water . Otherwise, the water could be ...
-
Electrolux 76639 - page 48
Installation and connection instructions 48 T echnical data Dimensions (dimensions in mm) Height Adjustment approx. +1 0 / -5 mm Load (depending on the progr am) max. 5 kg Area of use Domestic Drum speed, spinning see rating plate Water pr essure 1-1 0 bar (=1 0-1 00 N /cm 2 = 0.1-1.0 Mpa) ...
-
Electrolux 76639 - page 49
Warranty conditions 49 W ARRANTY CONDITIONS Gr eat Britain Guarantee Conditions AEG offer the following guar antee to the firs t purchaser of this appliance. 1. The guar antee is valid for 12 months commencing when the appl iance is handed over to the first r etail purchaser , which must be verified by purchase invoice or simila r docu- mentation. ...
-
Electrolux 76639 - page 50
Index 50 INDEX A Automatic adjustment foot . . . . . . . . . . 9 , 41 C Changing t he program . . . . . . . . . . . . . . . . 23 Child safety feature . . . . . . . . . . . . . . . 30 , 36 Circulation pump . . . . . . . . . . . . . . . . . . 9 , 29 Conditioner . . . . . . . . . 9 , 11 , 16 , 17 , 21 , 26 Cottons . . . . . . . . . . . . . . . . . . . ...
-
Electrolux 76639 - page 51
Service & Spare Parts 51 SERVICE & SPAR E P ARTS If after carrying out the nece ssary checks there is still a fault with your appliance please contact your local AEG Service Force Centr e. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or elec ...
-
Electrolux 76639 - page 52
AEG Hausger ä te GmbH P ostfach 1 036 D-90327 N ü rnberg http://www .aeg.hausgeraete.de © Copyright by AEG 822 942 830 -0 1- 030 1-03 ...
Do you have a question concerning Electrolux 76639?
Use the form below
If you did not solve your problem by using a manual Electrolux 76639, ask a question using the form below. If a user had a similar problem with Electrolux 76639 it is likely that he will want to share the way to solve it.