English dropdown-ico

Manual Multiquip SP303516

123 pages 5.99 mb
Download

Go to site of 123

Summary
  • Multiquip SP303516 - page 1

    OPERATION AND PARTS MANUAL SP3 “STREET PRO” PROFESSIONAL SLAB SAW 35 HP WISCONSIN DIESEL ENGINE MODELS SP303516, SP303520, SP303526 SP303530 Revision #3 (09/29/06) THIS MANUAL MUST COMPANY THE EQUIPMENT AT ALL TIMES. Diamond Back To find the latest revision of this publication, visit our website at: www.multi q ui p .com ...

  • Multiquip SP303516 - page 2

    ...

  • Multiquip SP303516 - page 3

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 1 MQ SP-3035 CONCRETE SAW P ROPOSITION 65 W ARNING ...

  • Multiquip SP303516 - page 4

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 2 MQ SP-3035 CONCRETE SAW S ILICOSIS /R ESPIRATORY HAZARDS Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, ...

  • Multiquip SP303516 - page 5

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 3 MQ SP-3035 CONCRETE SAW Table of Contents PROPOSITION 65 WARNING .......................................................................................1 SILICOSIS /RESPIRATORY HAZARDS ......................................................................2 PAR ...

  • Multiquip SP303516 - page 6

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 4 MQ SP-3035 CONCRETE SAW MAINTENANCE .............................................................................................................40 R EMOVABLE G UARDS AND A CCESS P ANELS .................................................................. 40 B E ...

  • Multiquip SP303516 - page 7

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 5 MQ SP-3035 CONCRETE SAW P ULLEY AND V-B ELT A SSY . ........................................................................................ 101 B ATTERY A SSY . .................................................................................................. ...

  • Multiquip SP303516 - page 8

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 6 MQ SP-3035 CONCRETE SAW www .m ultiquip .com Best Deal! Note: Discounts Are S ubject To Change Note: Discounts Are S ubject To Change Non-Dealer Customers: Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near yo ...

  • Multiquip SP303516 - page 9

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 7 MQ SP-3035 CONCRETE SAW SAFETY FOR YOUR SAFETY AND THE SAFETY OF OTHERS !  NOTE This Owner's Manual has been developed to provide instruct ions for the safe and efficient operation of the Multiquip SP-3035 CONCRETE SAW. For engine maintenance inform ...

  • Multiquip SP303516 - page 10

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 8 MQ SP-3035 CONCRETE SAW HAZARD SYMBOLS  Explosive Fuel Gasoline is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine ne ar spilled fuel or combustible fluids. DO NOT fill the fuel tank while t he engine is runnin ...

  • Multiquip SP303516 - page 11

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 9 MQ SP-3035 CONCRETE SAW HAZARD SYMBOLS Over Speed NEVER tamper with factory settings of engi ne governor or speed settings. Ensure the proper Speed Kits are in stalled to safely support the prescribed RPM settings for diamond blade operations. Guards and Cover ...

  • Multiquip SP303516 - page 12

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 10 MQ SP-3035 CONCRETE SAW HAZARD SYMBOLS Skin Injection Hazard NEVER use your hand to find hydraulic leaks. Use a piece of wood or cardboard. Hydraulic fluid injected into the skin must be treated by a knowledgeable physician immediately or severe injury or dea ...

  • Multiquip SP303516 - page 13

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 11 MQ SP-3035 CONCRETE SAW General Safety Warnings Most accidents involving product operation, main tenance and repair are caused by failure to observe basic safety rules and precautions. Accidents can often be avoided by recognizing potentially hazardous situat ...

  • Multiquip SP303516 - page 14

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 12 MQ SP-3035 CONCRETE SAW General Safety Warnings WARNING  ALWAYS read, understand, and follow procedures in the Operator’s Manual before attempting to operate the equipment.  Be sure the operator is familiar with proper safety precautions and operating ...

  • Multiquip SP303516 - page 15

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 13 MQ SP-3035 CONCRETE SAW BLADE SAFETY WARNING  ALWAYS inspect diamond blades before each use. The blade should exhibit no cracks, dings, or flaws in the steel centered core and/or rim. Center (arbor) hole must be undamaged and true.  Examine blade flange ...

  • Multiquip SP303516 - page 16

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 14 MQ SP-3035 CONCRETE SAW SAW TRANSPORTATION SAFETY WARNING  Use appropriate lifting equipment to ensure the safe movement of the saw.  DO NOT use the handle bars and/or front poi nter as lifting points.  NEVER attempt to tow the untrailered saw behi n ...

  • Multiquip SP303516 - page 17

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 15 MQ SP-3035 CONCRETE SAW MACHINE OPERATION AND SAFETY DECALS The Multiquip SP-3035 Saw is equipped with a nu mber of operation and safety decals. Should any of these decals become unreadable, replacements can be obtained from your dealer. Fig. 1 — Decals Nes ...

  • Multiquip SP303516 - page 18

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 16 MQ SP-3035 CONCRETE SAW Serial Tag Fig. 2 — Serial Tag  NOTE For future reference, fill in th e model number and serial number of your saw in the space above. The serial tag contains the model number and serial number of the saw. This information deta ...

  • Multiquip SP303516 - page 19

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 17 MQ SP-3035 CONCRETE SAW O PERATION Before Starting Walk around the saw and ensure that all guards and panels are properly installed. Wear eye and hearing protection. Wear protective clothing. 1. Check engine and hydraulic oil. 2. Verify the proper-sized blade ...

  • Multiquip SP303516 - page 20

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 18 MQ SP-3035 CONCRETE SAW Control Panel Fig. 5 — The Control Panel Auxiliary Switch Voltmeter T hrottle Engine On- Of f -Start Plunge Button Operating Instructions Speed Control Joystick Safety Warnin g s Water Pump Switch Maintenance Information Water Flow C ...

  • Multiquip SP303516 - page 21

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 19 MQ SP-3035 CONCRETE SAW Engine Power, Cutting Power & Sheave Size Blade Size & Configuration per Model The SP-3035 is available in four Blade Speed co nfigurations. The following chart shows the various configurations for each model. Blade Size Model ...

  • Multiquip SP303516 - page 22

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 20 MQ SP-3035 CONCRETE SAW Installing the Blade, Blade Guard & Blade Flange Remain Clear of all parts of saw while installing blade to prevent crush injury or death. Verify the engine start switch is OFF before installing blade. WARNING Tighten the 5/8” bl ...

  • Multiquip SP303516 - page 23

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 21 MQ SP-3035 CONCRETE SAW Removing the Blade, Blade Guard & Blade Flange Remain Clear of all parts of saw while installing blade to prevent crush injury or death. Verify the engine start switch is OFF before installing blade. WARNING Tighten the 5/8” blad ...

  • Multiquip SP303516 - page 24

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 22 MQ SP-3035 CONCRETE SAW Stacking Blades for Wide Cuts Remain Clear of all parts of saw while installing blade to prevent crush injury or death. Verify the engine start switch is OFF before installing blade. WARNING Tighten the 5/8” blade-mounting bolt to 10 ...

  • Multiquip SP303516 - page 25

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 23 MQ SP-3035 CONCRETE SAW Installing and Removing the Blade Guard Blade Guards for the SP-3035 concrete saw can be installed on either side of the saw. Verify the engine start switch is OFF before installing blade. WARNING Remain clear of all parts of saw while ...

  • Multiquip SP303516 - page 26

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 24 MQ SP-3035 CONCRETE SAW Removing the Blade Guard During use, the Blade Guard can become tight on th e tapered mounting tab. To loosen it, wiggle the Rear Blade Guard Handle up and down , while lifting with the Top Handle. Blade Guard Water Supply Verify that ...

  • Multiquip SP303516 - page 27

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 25 MQ SP-3035 CONCRETE SAW Installing the Flange Guard The Flange Guard provides protection from the Blade Flange not in use. 1. Verify that the unused Blade Flan ge is secured to the Spindle by tightening the mounting bolt. 2. Slide the Flange Guard onto the Gu ...

  • Multiquip SP303516 - page 28

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 26 MQ SP-3035 CONCRETE SAW Water Supply and Control WARNING To prevent damage to the impeller of a belt driven water pum p , do not run the engine with the water pump switch on, unless the water supply is connected and water is flowing. When storing the saw duri ...

  • Multiquip SP303516 - page 29

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 27 MQ SP-3035 CONCRETE SAW Handlebars The handlebars are adjustable to three different angles, for optimum operator control, and can also be slid fully inward for storage. Once hand lebars are adjusted, lock them into position by tightening the lock knob on each ...

  • Multiquip SP303516 - page 30

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 28 MQ SP-3035 CONCRETE SAW Fueling the Saw The 3000 Series saws feature a five-gallon clear molded plastic fuel tank with a sight gauge, central drain, and shutoff valve. The gas tank cap is located at the front of the saw. WARNING To prevent damage to the impel ...

  • Multiquip SP303516 - page 31

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 29 MQ SP-3035 CONCRETE SAW Starting and Stopping the Engine WARNING Do not leave the saw unattended while the engine is running. Do not start, park, or leave the saw unattended on a slope. CAUTION  If the saw has an optional water pump, do not run the saw dry ...

  • Multiquip SP303516 - page 32

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 30 MQ SP-3035 CONCRETE SAW Pointer Adjustment 1. Lower the front pointer assembly: Release the ro pe from the cam cleat, and rotate the pointer forward into position. 2. Adjust the pointer rod by loosening the lock knob: Once the pointer rod is set to the cut li ...

  • Multiquip SP303516 - page 33

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 31 MQ SP-3035 CONCRETE SAW Raise – Lower Controls This saw uses a 12-volt hydraulic pump and cylinde r to raise and lower the blade. Controls are located on the speed control joystick handle. Fig. 17 — Joystick Handle 1. To plunge the blade, depress the butt ...

  • Multiquip SP303516 - page 34

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 32 MQ SP-3035 CONCRETE SAW Setting the Depth Gauge & Depth Stop The 3000 Series saws use a cable-controlled Depth Gauge and mechanical Depth Stop to lock the blade at the desired cut depth. See Fig. 18. Setting the Depth Gauge 1. Lower the blade until it jus ...

  • Multiquip SP303516 - page 35

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 33 MQ SP-3035 CONCRETE SAW Drive System The 3000 Series saws have a cable-controlled Hy dro-Gear hydrostatic powered transaxle with fully adjustable F-N-R (Forward-Neutral-Reverse) speed adjustment via a joystick control handle. The system utilizes a remote oil ...

  • Multiquip SP303516 - page 36

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 34 MQ SP-3035 CONCRETE SAW Drive System Controls The control handle controls FORWARD-NEUTRAL-RE VERSE (F-N-R) speeds and the raising and lowering of the saw. To increase forward speed, slowly move the joystick FORWARD. Pulling the joystick backward decreases saw ...

  • Multiquip SP303516 - page 37

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 35 MQ SP-3035 CONCRETE SAW Positraction Positraction, when ON, locks bo th drive wheels together for straight-line movement. It is recommended for all cutting and is especially he lpful on uneven surfaces, and when loading and unloading the saw. 1. Move the Posi ...

  • Multiquip SP303516 - page 38

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 36 MQ SP-3035 CONCRETE SAW Transaxle The hydrostatic-powered transaxle has no chains, sprockets or gearboxes to service. There is a simple cable control for forward-reverse motion, an d a single drive belt from th e engine to power the transaxle. Fig. 22 —Tran ...

  • Multiquip SP303516 - page 39

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 37 MQ SP-3035 CONCRETE SAW Transportation Tie-downs and Lift Point Tie-downs The saw is provided with holes at each corner of the lower frame for easy tie-down during transportation. The saw MUST be tied down whenever it is being transported. Fig. 24 —Tie-down ...

  • Multiquip SP303516 - page 40

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 38 MQ SP-3035 CONCRETE SAW Operation on a Slope or Incline Never operate, cut, or face the saw down a slope or incline. The weight of the saw will shift to the front wheels allowing the rear wheels to skid or come completely off the ground. This allows the saw t ...

  • Multiquip SP303516 - page 41

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 39 MQ SP-3035 CONCRETE SAW If an attempt is made to start the saw with the bl ade pinched, the starter will suffer damage. If an attempt is made to use the lift pump to raise the saw to free the blade, the lift motor and front axle could be damaged. If an attemp ...

  • Multiquip SP303516 - page 42

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 40 MQ SP-3035 CONCRETE SAW M AINTENANCE This saw has many service-saving features, such as fully enclosed oil bath lubricated Spindle bearings, which require no daily lubrication.  NOTE Level the saw frame surface prior to service in order to get accurate ...

  • Multiquip SP303516 - page 43

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 41 MQ SP-3035 CONCRETE SAW Belts and Pulleys Belt Qty Part Number Spindle Drive Belt (POWERBA ND) 1 520006 Transaxle Drive Belt 1 521005 Engine to Jack shaft Drive Belt 1 521005 Fig. 27 — Belt Locations V-Belt Tension The ideal V-Belt tension is the lowest ten ...

  • Multiquip SP303516 - page 44

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 42 MQ SP-3035 CONCRETE SAW Spindle (Blade Shaft) Driv e Belt Tension Adjustment  NOTE When loosening driv e belts, lower the saw to reduce stress on the tensioning system, and use gravity to pul l the engine forward slightl y. When tightening belts, raise ...

  • Multiquip SP303516 - page 45

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 43 MQ SP-3035 CONCRETE SAW 4. Loosen the Outer Jam Nut on the Single Point Belt Tension Bolt. Turn the Inner Jam Nut counter-clockwise. 5. Adjust drive belt to desired tension. Do Not over tighten. 6. Tighten Engine Mount Lock Bolts. 7. Tighten the Jam Nuts to p ...

  • Multiquip SP303516 - page 46

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 44 MQ SP-3035 CONCRETE SAW Replacing the Jack Shaft Belt WARNING NEVER attempt to check or adjust the V-belt tension with the engine running. Severe injury can occur. Keep fingers, h ands, hair, and clothing away from all moving parts. 1. Remove the Belt Guards ...

  • Multiquip SP303516 - page 47

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 45 MQ SP-3035 CONCRETE SAW Blade Flange Removal/Installation Correct removal or installation of the Inner Bl ade Flange or Flange requires a Flange Puller (option Part Number 18503) as shown below. WARNING Follow instructions closely to prevent injury from flyin ...

  • Multiquip SP303516 - page 48

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 46 MQ SP-3035 CONCRETE SAW DANGER Ensure the Outer Flange is in place to prevent the Puller and Inner Flange from flying off when the taper breaks loose, and causing injury !  NOTE If the Inner Flange does not re adily come free from the tapered Spindle, l ...

  • Multiquip SP303516 - page 49

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 47 MQ SP-3035 CONCRETE SAW 6. Loosen the Mounting Bolt and remo ve the Outer Flange and Bushing. 7. Inspect the Inner Flange to ensure the proper seating of the tapered fit. The Inner Flange should be seated between .0 30” and 0.0” (flush) to the end of the ...

  • Multiquip SP303516 - page 50

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 48 MQ SP-3035 CONCRETE SAW Spindle Replacement  NOTE To assure correct Spindle/Wheel al ignment it is r ecommended that this operation be performed by a Mu lt iquip Authorized Service Cen ter. DO NOT unbolt the Spindle Moun ting Bl ocks, as they have been ...

  • Multiquip SP303516 - page 51

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 49 MQ SP-3035 CONCRETE SAW Fig. 35 — Spindle Replacement 7. Remove the Spindle.  DO NOT unbolt the Spindle Mounting Blocks , as they have been factory-installed for correct Spindle/wheel alignment. 8. Fill the new Spindle with approved hydraulic oil and cap ...

  • Multiquip SP303516 - page 52

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 50 MQ SP-3035 CONCRETE SAW Circuit Breakers Three thermal circuit breakers are located behind the Control Panel access cover. Fig. 37 — Circuit Breaker location Under normal circumstance circuit breakers do no t require service; they are automatically re-set o ...

  • Multiquip SP303516 - page 53

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 51 MQ SP-3035 CONCRETE SAW Lubrication This saw has six grease fittings. Locations are sh own in Figure 38 on the front axle assembly, and one, (not shown) on the Jackshaft assembly.  Front axle pivot bearings (2)  Hydraulic lift cylinder end (1)  Depth ...

  • Multiquip SP303516 - page 54

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 52 MQ SP-3035 CONCRETE SAW Engine Maintenance The Model SP-3035 uses a 35 HP Wisconsin engine. See the engine manual for service details.  Check air filters daily. Do not clean. Replace as needed. See Caution below.  Check engine oil level daily.  Level ...

  • Multiquip SP303516 - page 55

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 53 MQ SP-3035 CONCRETE SAW Raise-Lower System This saw uses a 12-volt hydraulic pump an d cylinder to power the raise-lower system.  Level the frame prior to service to get accurate readings.  Check oil level daily.  Fill the reservoir half full when co ...

  • Multiquip SP303516 - page 56

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 54 MQ SP-3035 CONCRETE SAW Control Handle Adjustment The Control Handle is adjustable to provide the preferred “feel”. 1. Using a ¼” Allen wrench and 9/16” wrench, loosen both pivot bolts until they can be turned by hand. Pivot #1 requires only a 9/16? ...

  • Multiquip SP303516 - page 57

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 55 MQ SP-3035 CONCRETE SAW Hydraulic System The hydraulic system consists of: Spindle Assembly (1) Hydraulic Pump (2) Transaxle Assembly (9) Hydraulic Manifold (4 ) Lift Cylinder (5) Oil Filters (3 , 6) Hydraulic Drive and Spin dle Oi l Reservoir (7) Lift Cylind ...

  • Multiquip SP303516 - page 58

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 56 MQ SP-3035 CONCRETE SAW Draining & Filling the Hydraulic System To drain the Transaxle 1. Remove the drain plug from the bottom of the Spindle housing and the bottom of the Transaxle. Fig. 43 — Transaxle Drain Plug  NOTE Collect and dispose of the ...

  • Multiquip SP303516 - page 59

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 57 MQ SP-3035 CONCRETE SAW Fig. 44 — Spindle Assembly 1. Raise the saw 2/3 or more up. 2. Remove the drain plug from the bottom of the Spindle housing. 3. Re-install the drain plug and install a new oil filter. CAUTION To prevent damage to the hydraulic pump, ...

  • Multiquip SP303516 - page 60

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 58 MQ SP-3035 CONCRETE SAW Drive Wheel Alignment Below is the suggested technique for aligning the wheels. Distance X is the same on either side; the Front Axle and Spindle must be at right angles to the frame edge. Distance A is 3/16” (.187”) longer on the ...

  • Multiquip SP303516 - page 61

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 59 MQ SP-3035 CONCRETE SAW The drive wheels are aligned by adjust ing the entire rear drive assembly. 1. Raise the saw halfway, then lift the rear of the saw until flanges touch the ground. Use suitable supports to prevent tipping or shifting of weight. 2. Loose ...

  • Multiquip SP303516 - page 62

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 60 MQ SP-3035 CONCRETE SAW Positraction Adjustment Fig. 47 — Positraction Adjustment Bolt Locations 1. Lift Saw 4” to 6” and tilt forward to place spin dle flanges on ground. When flanges are on the ground, depress Raise Button to raise the rear of the saw ...

  • Multiquip SP303516 - page 63

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 61 MQ SP-3035 CONCRETE SAW EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions . Sam ...

  • Multiquip SP303516 - page 64

    MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 62 MQ SP-3035 CONCRETE SAW SUGGESTED SPARE PARTS MQ SP-3035 CONCRETE SAW WITH WISCONSIN 35 HP AIR-COOLED DIESEL ENGINE 1 to 3 Units Qty. P/N Description 1 .......... 300000-1 ........... FILTER, AIR, ELEMENT, PRIMA RY 1 .......... 300000-2 ........... FILTER, AI ...

  • Multiquip SP303516 - page 65

    MQ SP-3035 Concrete Saw — Name p late and Decals MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 63 C OMPONENT D RAWINGS Nameplate and Decals Assy. The Multiquip SP-3035 Saw is equipped wit h a number of operation and safety dec als. Should any of these decals become unreadable, replacements c an be obtaine ...

  • Multiquip SP303516 - page 66

    MQ SP-3035 Concrete Saw — Name p late and Decals MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 64 Nameplate and Decals Assy . NO PART NO PART NAME QTY. REMARKS 1 25250-001 DECAL, WARNING, KEEP FEET CLEAR 2 2 606004 DECAL, BLADE GUARD REMOVAL 2 3 25782 DECAL, MQ DIAMOND LOGO 4 4 21302 DECAL, WARNING, INSTA ...

  • Multiquip SP303516 - page 67

    MQ SP-3035 Concrete Saw — Deck/Gau g e Panel Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 65 Deck/Gauge Panel Assy. ...

  • Multiquip SP303516 - page 68

    MQ SP-3035 Concrete Saw — Deck/Gau g e Panel Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 66 Deck/Gauge Panel Assy. NO PART NO PART NAME QTY. REMARKS 1 M600020 GAUGE PANEL 1 2 M600019 DECK PANEL 1 ...

  • Multiquip SP303516 - page 69

    MQ SP-3035 Concrete Saw — Console/Sheet Metal Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 67 Console/Sheet Metal Assy. ...

  • Multiquip SP303516 - page 70

    MQ SP-3035 Concrete Saw — Console/Sheet Metal Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 68 Console/Sheet Metal Assy . NO PART NO PART NAME QTY. REMARK 1# 0166 SCREW, HHC 3/8-16 X 7/8 3 2# 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 3 3# 204007 BELT GUARD 1 8 25796 CONSOLE, RED 1 18 0655 SCREW, HHC 5/ ...

  • Multiquip SP303516 - page 71

    MQ SP-3035 Concrete Saw — Access Panel Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 69 Access Panel Assy. ...

  • Multiquip SP303516 - page 72

    MQ SP-3035 Concrete Saw — Access Panel Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 70 Access Panel Assy . NO PART NO PART NAME QTY. REMARK 1# 25795 PANEL, REAR CONSOLE, RED 1 2# 29057 DOCUMENT BO X, CP90007-07 1 3# 560020 LATCH, REAR SAW ACCESS PANEL 2 4# 577002 WEATHER STRIP, REAR SAW ACCESS PA ...

  • Multiquip SP303516 - page 73

    MQ SP-3035 Concrete Saw — Fuel Tank Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 71 Fuel Tank Assy. ...

  • Multiquip SP303516 - page 74

    MQ SP-3035 Concrete Saw — Fuel Tank Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 72 Fuel Tank Assy . NO PART NO PART NAME QTY. REMARK 1# 1400003 TANK, FUEL 1 2# 29509 CAP, FUEL TANK 2.25" DIA. ONE WAY VALVE 1 3# 19633 BUSHING, RUBBER FUEL DAPCO 10672 1 4# 446005 VALVE, FUEL ON/OFF 1/4" ...

  • Multiquip SP303516 - page 75

    MQ SP-3035 Concrete Saw — F-N-R Control Handle Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 73 F-N-R Control Handle Assy. ...

  • Multiquip SP303516 - page 76

    MQ SP-3035 Concrete Saw — F-N-R Control Handle Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 74 F-N-R Control Handle Assy . NO PART NO PART NAME QTY . REMARK 1 560030 F-N-R CONTROL HANDLE ASSY. ...................... 1 ....................... INCLUDES ITEMS W/# 2# 560028-6 SCREW, #6-32 X 3/8 5 3# ...

  • Multiquip SP303516 - page 77

    MQ SP-3035 Concrete Saw — Jo y stick Mountin g Ass y . MQ SP-3035 CONCRETE SAW — MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 75 Joystick Mounting Assy. 25 11 5 13 4 16 14 17 12 19 9 22 24 26 24 21 20 23 6 2 20 18 8 15 1 10 3 1 20 7 ...

  • Multiquip SP303516 - page 78

    MQ SP-3035 Concrete Saw — Jo y stick Mountin g Ass y . MQ SP-3035 CONCRETE SAW — MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 76 Joystick Mounting Assy . NO PART NO PART NAME QTY. REMARK 1# 0161D NUT, HEX FINISH 5/16-18 2 2# 10019 NUT, FYLOC #10-32 1 3# 1579 SCREW. JJC 1/4-20 X .5 1 4# 2203 WASHER, FLA ...

  • Multiquip SP303516 - page 79

    MQ SP-3035 Concrete Saw — Lift Pum p Circuit Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 77 Lift Pump Circuit Assy. ...

  • Multiquip SP303516 - page 80

    MQ SP-3035 Concrete Saw — Lift Pum p Circuit Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 78 Lift Pump Circuit Assy . NO PART NO PART NAME QTY. REMARK 2 340011 PUMP, LIFT 1 3 169003 PIN, CYLINDER 2 4 447007 CYLINDER, LIFT 1 5 21159 FITTING, 45 4MJ-4MO 1 6 368817 FITTING, 90 4MJ-4MO 1 7 35149 FITT ...

  • Multiquip SP303516 - page 81

    MQ SP-3035 Concrete Saw — Water S y stem Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 79 Water System Assy. ...

  • Multiquip SP303516 - page 82

    MQ SP-3035 Concrete Saw — Water S y stem Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 80 Water System Assy . NO PART NO PART NAME QTY. REMARK 1 446004 VALVE, BALL, 1/2 BRASS 1 2 35047 HOSE ASM, 95.1" #8LP 1 3 35052 HOSE, 1/2 ID PUSHLOCK 250 PSI, 8" 1 4 25059 FITTING, BRASS 8 PUSH-ON 1/2 ...

  • Multiquip SP303516 - page 83

    MQ SP-3035 Concrete Saw — De p th Indicator Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 81 Depth Indicator Assy. ...

  • Multiquip SP303516 - page 84

    MQ SP-3035 Concrete Saw — De p th Indicator Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 82 Depth Indicator Assy . NO PART NO PART NAME QTY. REMARK 1 125032 DEPTH INDICA TOR U-BRACKET 1 2 110031 POINTER, DEPTH 1 3 560025 KNOB, COMFORT GRIP 1 4 460019 FLANGE BEARING, .25ID 1 5 973752 SCREW, BHSC, ...

  • Multiquip SP303516 - page 85

    MQ SP-3035 Concrete Saw — Handle and Li g ht Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 83 Handle and Light Assy. ...

  • Multiquip SP303516 - page 86

    MQ SP-3035 Concrete Saw — Handle and Li g ht Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 84 Handle and Light Assy . NO. PART NO. PART NAME QTY. REMARKS 1 12387 NUT, NYLOCK 8X32 2 2 120206 LIGHT BAR, CONCRETE SAW 1 3 405001 CONNECTOR, PLUG, 4 PIN FEMALE 1 4 0161 C WASHER, LOCK 5/16" 1 5 0161 ...

  • Multiquip SP303516 - page 87

    MQ SP-3035 Concrete Saw — Front/Rear Pointer Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 85 Front/Rear Pointer Assy. ...

  • Multiquip SP303516 - page 88

    MQ SP-3035 Concrete Saw — Front/Rear Pointer Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 86 Front/Rear Pointer Assy . NO PART NO PART NAME QTY. REMARK 1# 120045 RIGHT SIDE POINTER 1 2# 120046 LEFT SIDE POINTER 1 3# 25832 ROPE ASSY., FRONT POINTER 1 4# 110044 POINTER, FRONT 17-1/4" 1 5# 1550 ...

  • Multiquip SP303516 - page 89

    MQ SP-3035 Concrete Saw — Gau g es and Controls Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 87 Gauges and Controls Assy. ...

  • Multiquip SP303516 - page 90

    MQ SP-3035 Concrete Saw — Gau g es and Controls Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 88 Gauges and Controls Assy . NO PART NO PART NAME QTY. REMARK 1 15171 CABLE PULL 1 2 446004 VALVE, WATER FLOW CONTROL 1 3 25627 F-N-R CONTROL ASSY. 1 4 560025 KNOB, COMFORT GRIP 1 5 574002 CAM CLEAT 1 6 ...

  • Multiquip SP303516 - page 91

    MQ SP-3035 Concrete Saw — Front Axle Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 89 Front Axle Assy. ...

  • Multiquip SP303516 - page 92

    MQ SP-3035 Concrete Saw — Front Axle Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 90 Front Axle Assy . NO PART NO PART NAME QTY. REMARK 8 913161 SCREW, HHC 7/16-14 X 2 4 9 933243 WASHER, FLAT SAE 7/16 8 10 100005 BEARING BACKING PLATE 2 11 460006 BEARING, FLANGED, 1" 2 12 16677 NUT, LOCK NUT ...

  • Multiquip SP303516 - page 93

    MQ SP-3035 Concrete Saw — De p th Sto p Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 91 Depth Stop Assy. ...

  • Multiquip SP303516 - page 94

    MQ SP-3035 Concrete Saw — De p th Sto p Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 92 Depth Stop Assy . NO PART NO PART NAME QTY. REMARK 1 35120 DEPTH STOP LEAD SCREW 1 2 933244 WASHER, FLAT SAE 1/2 3 3 565002 SPRING, COMPRESSION, 7/8 1 4 582009 COLLAR, SET .50 ID 1 5 442014 DEPTH STO P LINKAGE ...

  • Multiquip SP303516 - page 95

    MQ SP-3035 Concrete Saw — Platform Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 93 Platform Assy. ...

  • Multiquip SP303516 - page 96

    MQ SP-3035 Concrete Saw — Platform Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 94 Platform Assy . NO PART NO PART NAME QTY. REMARK 1 25807 PLATFORM 1 3 924287 SCREW, FHSC, 3/8-16 X 1-1/4,NP 6 4 120038 CLIP, MOUNT,BLADEGUARD 1 5 120040 SPACER, BLADEGUA RD CLIP, .25 THICK 2 6 3214 SCREW, HHC 1/2-1 ...

  • Multiquip SP303516 - page 97

    MQ SP-3035 Concrete Saw — Drive Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 95 Drive Assy. ...

  • Multiquip SP303516 - page 98

    MQ SP-3035 Concrete Saw — Drive Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 96 Drive Assy . NO PART NO PART NAME QTY. REMAR K 1 263002 TRANSAXLE ASSY. ................................................................ 1 ............. INCLUDES ITEMS W/% 2 35325 WHEEL, POLY-11X3 .................... ...

  • Multiquip SP303516 - page 99

    MQ SP-3035 Concrete Saw — Bladeshaft and Mountin g Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 97 Bladeshaft and Mounting Assy. ...

  • Multiquip SP303516 - page 100

    MQ SP-3035 Concrete Saw — Bladeshaft and Mountin g Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 98 Bladeshaft and Mounting Assy . NO. PART NO. PART NAME QTY. REMARKS 1 35270 BLADESHAFT AND MOUNTING GROUP ................................ 1....... INCL UDES ITEMS W/# 2# 25840 BLADESHAFT ASSY. W/TAC ...

  • Multiquip SP303516 - page 101

    MQ SP-3035 Concrete Saw — Positraction Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 99 Positraction Assy. ...

  • Multiquip SP303516 - page 102

    MQ SP-3035 Concrete Saw — Positraction Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 100 Positraction Assy . NO PART NO PART NAME QTY. REMARK 1 442019 POSITRACTION ACTUATOR LEVER 1 2 560026 COVER, HANDLE FLAT RED 1 3 442020 LEVER CONNECTOR 1 4 933015 FRICTION DISC, 1-1/2" X 1/2" X 1/8&qu ...

  • Multiquip SP303516 - page 103

    MQ SP-3035 Concrete Saw — Pulle y and V-Belt Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 101 Pulley and V-Belt Assy. ...

  • Multiquip SP303516 - page 104

    MQ SP-3035 Concrete Saw — Pulle y and V-Belt Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 102 Pulley and V-Belt Assy . NO PART NO PART NAME QTY. REMARKS 1 540006 PULLEY, BLADESHAFT 3.8 6G 3VX1615 .............1..........16" BLADE 1 540066 PULLEY, BLADESHAFT 4.0 6G 3VX2012 .............1..... ...

  • Multiquip SP303516 - page 105

    MQ SP-3035 Concrete Saw — Batter y Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 103 Battery Assy. ...

  • Multiquip SP303516 - page 106

    MQ SP-3035 Concrete Saw — Batter y Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 104 Battery Assy . NO PART NO PART NAME QTY. REMARK 1 404000 BATTERY, GROUP 26R 1 2 25838 MOUNT, BATTERY CLAMP 1 3 19303 CABLE, BATTERY PO S 4 GA X 48" POST 1 4 TBD CABLE, BATTERY POS 1 5 16782 CABLE, 24" PO ...

  • Multiquip SP303516 - page 107

    MQ SP-3035 Concrete Saw — En g ine Brackets Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 105 Engine Brackets Assy. ...

  • Multiquip SP303516 - page 108

    MQ SP-3035 Concrete Saw — En g ine Brackets Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 106 Engine Brackets Assy . NO PART NO PART NAME QTY. REMARK 1 125034 LIFTING RING 1 2 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 4 3 915105 SCREW, HHC 3/8-16 X 1.0 GRD8 4 4 125016-3 STANDOFF, LIFTING PLATE 35HP 4 5 ...

  • Multiquip SP303516 - page 109

    MQ SP-3035 Concrete Saw — En g ine Installation Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 107 Engine Installation Assy. ...

  • Multiquip SP303516 - page 110

    MQ SP-3035 Concrete Saw — En g ine Installation Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 108 Engine Installation Assy . NO PART NO PART NAME QTY. REMARK 1 15500 ENGINE, WISCONSIN W41770-467438R 1 2 25813 MOUNT, JACKSHAFT PIVOT ARM 1 3 120079 MOUNT, MOTOR TENSIONER 1 4 933246 WASHER, FLAT SAE ...

  • Multiquip SP303516 - page 111

    MQ SP-3035 Concrete Saw — Blade g uard Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 109 Bladeguard Assy. ...

  • Multiquip SP303516 - page 112

    MQ SP-3035 Concrete Saw — Blade g uard Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 110 Bladeguard Assy . NO PART NO PART NAME QTY. REMARK 1 M18100 BLADE GU ARD 16-INCH 1 1 M18140 BLADE GU ARD 20-INCH 1 1 M18180 BLADE GU ARD 26-INCH 1 1 M18220 BLADE GU ARD 30-INCH 1 2 10176 NUT, NYLOCK 1 3 582040 ...

  • Multiquip SP303516 - page 113

    MQ SP-3035 Concrete Saw — O p tional Water Pum p Kit Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 111 Optional Water Pump Kit Assy. ...

  • Multiquip SP303516 - page 114

    MQ SP-3035 Concrete Saw — O p tional Water Pum p Kit Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 112 Optional Water Pump Kit Assy . NO PART NO PART NAME QTY. REMARK 1 M18100 BLADE GU ARD 16-INCH 1 1 120084 DESCRIPTION 1 2 120085 MOUNT, WATER PUMP 1 3 342000 PUMP, WATER JABSCO 1 4 933242 WASHER, ...

  • Multiquip SP303516 - page 115

    MQ SP-3035 Concrete Saw — Collar Puller Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 113 Collar Puller Assy. ...

  • Multiquip SP303516 - page 116

    MQ SP-3035 Concrete Saw — Collar Puller Ass y . MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 114 Collar Puller Assy . NO PART NO PART NAME QTY. REMARK 1# 584037 OUTER PULLER 1 2# 584038 PLATE, PULLER 1 3# 2549 SCREW, HHC 1/2-13 X 3 3 4# 25138 SCREW, HHC 5/8-11 X 5 TAP 1 5# 18503-I COLLAR PULLER INSTRUCTI ...

  • Multiquip SP303516 - page 117

    MQ SP-3035 Concrete Saw — Seal Sleeve Puller Seal/Seal Installation Tool MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 115 Seal Sleeve Puller/Seal Installation Tool ...

  • Multiquip SP303516 - page 118

    MQ SP-3035 Concrete Saw — Seal Sleeve Puller Seal/Seal Installation Tool MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 116 Seal Sleeve Puller/Seal Installation Tool NO PART NO PART NAME QTY. REMARK 1# 35163 SCREW, HHC 3/8 – 16 X 4 FULL THREAD 1 2 M18505 SEAL SLEEVE & THRUST WASHER PULLER ASM ....... ...

  • Multiquip SP303516 - page 119

    MQ SP-3035 Concrete Saw — Bushin g Extension Kits MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 117 Bushing Extension Kits ...

  • Multiquip SP303516 - page 120

    MQ SP-3035 Concrete Saw — Bushin g Extension Kits MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 118 Bushing Extension Kits BUSHING EXTENSION KIT 18501 (.375 — .75) NO PART NO PART NAME QTY. REMARK 1 926949 DOWEL PIN, 3/8 X 2-1/4 1 2 180003-1 OUTER COL LAR 1 3 582032 QD BUSHING 3/8 TO 3/4 1 4 90123445 5/ ...

  • Multiquip SP303516 - page 121

    MQ SP-3035 Concrete Saw — Electric Schematic MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 119 E LECTRIC S CHEMATIC ...

  • Multiquip SP303516 - page 122

    MQ SP-3035 Concrete Saw — S p ecifications MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAG E 120 S PECIFICATIONS Engine Wisconsin 35 hp V-4, elec tronic ignition, remote oi l filter and above-frame remote oil d rain Precle aner Centrifuga l type , self-clea ning Air Cleaner Four-stage air filtrati on, cartrid ...

  • Multiquip SP303516 - page 123

    OPERATION AND PARTS MANUAL UNITED STATES Multiquip Corporate Office MQ Parts Department 18910 Wilmington Ave. Tel. (800) 421-1244 800-427-1244 Fax: 800-672-7877 Carson, CA 90746 Fax (800) 537-3927 310-537-3700 Fax: 310-637-3284 Contact: mq@multiquip.com Mayco Parts Warranty Departme nt 800-306-2926 Fax: 800-672-7877 800-421- 1244, Ext. 279 Fax: 310 ...

Manufacturer Multiquip Category Saw

Documents that we receive from a manufacturer of a Multiquip SP303516 can be divided into several groups. They are, among others:
- Multiquip technical drawings
- SP303516 manuals
- Multiquip product data sheets
- information booklets
- or energy labels Multiquip SP303516
All of them are important, but the most important information from the point of view of use of the device are in the user manual Multiquip SP303516.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Multiquip SP303516, service manual, brief instructions and user manuals Multiquip SP303516. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Multiquip SP303516.

Similar manuals

A complete manual for the device Multiquip SP303516, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Multiquip SP303516 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Multiquip SP303516.

A complete Multiquip manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Multiquip SP303516 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Multiquip SP303516, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Multiquip SP303516, that we can find in the current document
3. Tips how to use the basic functions of the device Multiquip SP303516 - which should help us in our first steps of using Multiquip SP303516
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Multiquip SP303516
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Multiquip SP303516 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Multiquip SP303516?

Use the form below

If you did not solve your problem by using a manual Multiquip SP303516, ask a question using the form below. If a user had a similar problem with Multiquip SP303516 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)