English dropdown-ico

Manual Crate Amplifiers CMX62

16 pages 1.86 mb
Download

Go to site of 16

Summary
  • Crate Amplifiers CMX62 - page 1

    In order to achieve maximum performance from your new Crate Audio Mixer we recommend that you read this user ’ s guide prior to its use. User ’ s Guide for the CRA TE AUDIO CMX62 Stereo Console Mixer ...

  • Crate Amplifiers CMX62 - page 2

    2 THIS EQUIPMENT HAS BEEN DESIGNED AND ENGINEERED TO PROVIDE SAFE AND RELIABLE OPERA TION. IN ORDER TO PROLONG THE LIFE OF THE UNIT AND PREVENT ACCIDENT AL DAM- AGES OR INJURY , PLEASE FOLLOW THESE PRE- CAUTIONARY GUIDELINES: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN CHASSIS; DO NOT DEFEA T OR REMOVE THE GROUND PIN OF THE POWER COR ...

  • Crate Amplifiers CMX62 - page 3

    3 Introduction: In the world of professional sound reinforcement and audio reproduction there is no room for compromise. It is absolutely vital that the emotions of a performance are projected to your audience, not just sounds. Y our new Crate Audio CMX62 Stereo Console Mixer is a powerful tool which allows you to successfully bridge the gap betwee ...

  • Crate Amplifiers CMX62 - page 4

    4 The Mono Input Channels (1 – 6): 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 10 1 MIC IN: An XLR jack for balanced Low-Z mic inputs. When using a condenser mic, the Phantom Power switch (#63, rear panel - page 7) must be activated. 2 LINE: A T ip/Ring/Sleeve 1/4” jack for balanced Hi-Z mics, instruments, drum machines, and similar high impedance l ...

  • Crate Amplifiers CMX62 - page 5

    5 The Stereo Input Channels (7 – 10): 18 LEFT/MONO: A T ip/Sleeve 1/4” jack for instruments, drum machines, tape/CD chan- nels and similar high impedance signals. For stereo inputs use this jack for the left channel input and the Right jack (#19) for the right channel input. For mono inputs use this jack only . 19 RIGHT : A T ip/Sleeve 1/4” j ...

  • Crate Amplifiers CMX62 - page 6

    6 The Master Section: 33 AUX RET : Returns the stereo or mono signal from an external device. Stereo devices use both the Left and Right jacks; mono devices use only the Left jack. 34 EFF RET : Returns the effected signal from an external effects device. Stereo devices use both the Left and Right jacks; mono devices use only the Left jack. 35 T APE ...

  • Crate Amplifiers CMX62 - page 7

    7 The Rear Panel: 61 POWER CONNECTOR: Fasten the threaded collar of the supplied AC power supply to this connector . Align the pins of the power supply with those of the connector , press into place, then tighten the threaded collar onto the connector securely . 62 POWER: Use this switch to turn the mixer on (“–” depressed) and off. 63 PHANTO ...

  • Crate Amplifiers CMX62 - page 8

    Applications: Basic Mono Operation: This example shows how the mixer and one stereo power amplifier* may be used to run both the house speakers and the stage monitors. Connect a signal cable between the mixer ’ s Mono jack and the power amp’ s Channel 1 Input jack (A). Connect anoth- er signal cable between the mixer ’ s Aux Out jack and the ...

  • Crate Amplifiers CMX62 - page 9

    Applications: Home Studio: In this example the Main L/R outputs are connected to a computer through a compressor . The Monitor outputs are connected to the monitor power amp which drives the studio monitors. The output of the computer may be connected to the stereo channel 9/10 of the mixer and the remaining audio sources may be connected to the va ...

  • Crate Amplifiers CMX62 - page 10

    10 Applications: DJ Setup: In this example the mixer is connected to a stereo power amplifier which drives the house speakers. Connect a pair of signal cables between the mixer ’ s Main Left and Right jacks and the stereo power amplifier ’ s* Channel 1 and Channel 2 Input jacks (A). Connect a speaker cable between the power amp’ s Channel 1 S ...

  • Crate Amplifiers CMX62 - page 11

    11 Applications: House of W orship: In this example the mixer ’ s Main Outs are used for the sanctuary mix, the Aux outs are used for a platform mix, and a mono signal is provided for the childcare room (or other remote location). Connect signal cables between the mixer ’ s Main Left and Right jacks and the Input jacks of the sanctuary speakers ...

  • Crate Amplifiers CMX62 - page 12

    Applications: Separating V ocals and Instruments: In this example the Pan controls on all of the vocal mic channels are rotated fully clockwise to assign all vocal mics to the right channel. The instrument channels are then all assigned to the left channel by rotating their Pan controls fully counter clockwise. T wo pairs of speakers are required: ...

  • Crate Amplifiers CMX62 - page 13

    13 Applications: External Effects and Recorders: There are several ways to use the CMX62 with external signal processors (such as effects and delay units, limiters, etc.). For example, any (or all) of the six mono channels may have its own processor patched in by use of the Insert jack (#3, page 4). Effects may also be patched in through the Aux or ...

  • Crate Amplifiers CMX62 - page 14

    14 Equalization Diagrams: Each input channel of the CMX62 has three bands of equalization which allows you to alter the tonal characteristics of the input signal. The EQs may be used to add “color” or to compensate for inadequacies of the original signal. They also may be used to cut frequencies which cause unnatural sounds or to de-emphasize o ...

  • Crate Amplifiers CMX62 - page 15

    15 System Block Diagram: LEFT RIGHT EFF GROUP 1 GROUP 2 GROUP 1 GROUP 2 AUX PFL L PFL R LEFT RIGHT EFF AUX PFL L PFL R MIC +48V GAIN LOW CUT PEAK LINE FADER EFF AUX T HIGH MID LOW 2 3 R CH. 1 CH. 1 – 6: 6: PAN INSERT T R POST PRE PFL PFL CTL MAIN/GROUP HIGH MID LOW EQ -20dB MONO OUT MONO MAIN L/R GROUP/ L/R +4/-10 PEAK FADER EFF(a) AUX(a) CH. 7,9 ...

  • Crate Amplifiers CMX62 - page 16

    www .crateaudio.com ©2002 SLM Electronics, Inc. • A Division of St. Louis Music, Inc. 1400 Ferguson Avenue • St. Louis, MO 63133 U.S.A. 18-348-01 • 02/02 CMX62 Stereo Console Mixer T echnical Specifications Due to ongoing product development and improvement, the specifications contained herein are subject to change without notice. SYSTEM INP ...

Manufacturer Crate Amplifiers Category Music Mixer

Documents that we receive from a manufacturer of a Crate Amplifiers CMX62 can be divided into several groups. They are, among others:
- Crate Amplifiers technical drawings
- CMX62 manuals
- Crate Amplifiers product data sheets
- information booklets
- or energy labels Crate Amplifiers CMX62
All of them are important, but the most important information from the point of view of use of the device are in the user manual Crate Amplifiers CMX62.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Crate Amplifiers CMX62, service manual, brief instructions and user manuals Crate Amplifiers CMX62. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Crate Amplifiers CMX62.

Similar manuals

A complete manual for the device Crate Amplifiers CMX62, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Crate Amplifiers CMX62 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Crate Amplifiers CMX62.

A complete Crate Amplifiers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Crate Amplifiers CMX62 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Crate Amplifiers CMX62, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Crate Amplifiers CMX62, that we can find in the current document
3. Tips how to use the basic functions of the device Crate Amplifiers CMX62 - which should help us in our first steps of using Crate Amplifiers CMX62
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Crate Amplifiers CMX62
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Crate Amplifiers CMX62 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Crate Amplifiers CMX62?

Use the form below

If you did not solve your problem by using a manual Crate Amplifiers CMX62, ask a question using the form below. If a user had a similar problem with Crate Amplifiers CMX62 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)