English dropdown-ico

Manual Sitecom WL-130

32 pages Not applicable
Download

Go to site of 32

Summary
  • Sitecom WL-130 - page 1

    Wireless Range Extender WL-130 Full Manual ...

  • Sitecom WL-130 - page 2

    Table of Contents 1. Introduction .................. .................... ................... ................... ........ 1 Package Contents ........... ............ ............ .............. ............ ........... ............ ............ ............ ........... ........ .... ............ ..... 2 Features ........... ............ .......... ...

  • Sitecom WL-130 - page 3

    Introduction 1 1. Introduction This product is an access point for IEEE 802. 11g/ b 2.4GHz wireless network. You can use this access point to build up a wireless LAN. Any wi reless LAN station can j oin the wireless network by using the “Infrastructu re Mode”. Another option is the Universal Repeater mode w ith which you can extend the range of ...

  • Sitecom WL-130 - page 4

    Introduction 2 Package Contents T he Access Point inc ludes the following item s:  One Access Point with an tenna  One Power Adapter  One User’s Manual Features  Complies with the IEEE 802.11b/g (DSSS) 2.4GHz speci fication.  High data rate 54Mbps network speed.  Seamless ly integrate wireless and wire d Ethernet LAN networks. ? ...

  • Sitecom WL-130 - page 5

    Introduction 3 2. Physical Description Front Panel On the Access Point’s front pane l there are LED lights that in form you of the Access Point’s current status. Below is an explanation of each LED. LED Color Status Description Lit Po wer is supplie d. Power Green Off No Power. Flash Antenna is transmitting or receiving data. WLAN Green Off Ant ...

  • Sitecom WL-130 - page 6

    Introduction 4 Back Panel Access Point’s connection ports are located on the back panel. Below is the description of each connection port.  Antenna Connector: This round connection is standard Reverse SMA connector where any antenna wit h Reverse SMA connector can connec t to the Access Point.  DC Adapter Port Insert the power jack of the p ...

  • Sitecom WL-130 - page 7

    Wireless Range Extender (WL-130) Configuration 5 3. Hardware installation Use the WL-130 as an Access Point 1. Locate an optimum l ocation for the WL-130 . The best location for your Access Point is usually at th e center of your wireless network, with line of sight to all of your mobile stations. 2. Connect the WL-130 to your ro uter, hub or switc ...

  • Sitecom WL-130 - page 8

    Wireless Range Extender (WL-130) Configuration 6 4. Wireless LAN Acce ss Point Configura tion This Acce ss Point prov ides a web-ba sed configu ration tool allowing you to configure from wired or wireless stations. Foll ow the instructions below to get started configuration. From Wired Station 1. Make sure your wired station is in the same subnet a ...

  • Sitecom WL-130 - page 9

    Wireless Range Extender (WL-130) Configuration 7 1b) Windows XP 1: Click the Start button and select Settings , then click Network Connections. The Net work Connections window will appear. 2: Double-click Local Area Conn ection icon. The Local Area Connec tion window will appear. 3: Check your li st of Network Components. You should see Intern et P ...

  • Sitecom WL-130 - page 10

    Wireless Range Extender (WL-130) Configuration 8 2. Enter 192.168.0.254 in the address bar of your we b browser to access the Universal Repeaters configurat ion page. 3. A screen will pop up and request you to en ter a user name and passw ord. Enter the following: User Name: admi n Password: ad min Enter the def ault user name and p assword, then p ...

  • Sitecom WL-130 - page 11

    Wireless Range Extender (WL-130) Configuration 9 5. Configuring the WL-130 Every time when you have finished modifying a setting page and click “Apply” button, this page will pop-up. Th e settings have been successfully saved but will not take effect immediately. You have to restart the access po int to make the new settings take effect. You ca ...

  • Sitecom WL-130 - page 12

    Wireless Range Extender (WL-130) Configuration 10 Status and Information On this screen, you can see the general informat ion of the Ac cess Point inc luding Alias Name, Firmware Version, ESSID, Channel Number, Status, IP Address, MAC Addr ess, etc. Using the “Choose your Lan guage” box it’s possible to change the langu age of the WL-130 inte ...

  • Sitecom WL-130 - page 13

    Wireless Range Extender (WL-130) Configuration 11 Wireless Setting This Access Point su pports AP, WDS and Univer sal Repeater modes. “Accesspoint” provi des pure access point function. The simplest way to build up a wireless LAN is to use “Accesspoint”. If you want an access point to bridge wired E t hernet network and provide conn ection ...

  • Sitecom WL-130 - page 14

    Wireless Range Extender (WL-130) Configuration 12 AP Bridge-WDS mode setting p age: ...

  • Sitecom WL-130 - page 15

    Wireless Range Extender (WL-130) Configuration 13 Universal Repe ater mode sett ing page: Parameter Description ESSID The ESSID (up to 31 printable ASCII characters) is the unique name identi fied in a WLAN . The ID preven ts the unintent ional merging of two co -located WLAN s. Please make sure th at the ESSID of all stations in the same WLAN netw ...

  • Sitecom WL-130 - page 16

    Wireless Range Extender (WL-130) Configuration 14 address to act as a station to co nnect to another pee r or access point. You also can click “Clone MAC” button to let this device copy the MAC address of the PC you are using to configure this device. Root AP SSID In “ Unive rsal R epea ter m ode”, th is device can act as a stat ion to conn ...

  • Sitecom WL-130 - page 17

    Wireless Range Extender (WL-130) Configuration 15 “A-F”, “a-f” and “0-9” range) to be the WEP Key. For example: ASCII Characters: guest Hexadecimal Digits: 12345abcd e WEP Key This is only us ed when you select “WEP 64bits” or “WEP 128bits” encryption method. Th e WEP key is used to encrypt data transmitted between the br idged ...

  • Sitecom WL-130 - page 18

    Wireless Range Extender (WL-130) Configuration 16 Parameter Description MAC Address MAC address of this active wireless station. Tx Packet The number of transmitted packets that are sent out from this active wireless station. Rx Packet The number of r eceived packets that are received by th is active wireless station. TX Rate The transmission rate ...

  • Sitecom WL-130 - page 19

    Wireless Range Extender (WL-130) Configuration 17 Security This Access Point provides complete wirele ss LAN security functions, include WEP, IEEE 802.11x, IEEE 802.1 1x with WEP, WPA with pre-shared key and WPA with RADIUS. With these security functions, you can prevent your wi rele ss LAN from ill egal access. Please make sure your wireless stati ...

  • Sitecom WL-130 - page 20

    Wireless Range Extender (WL-130) Configuration 18 Parameter Description Key Length You can select the 64 or 128-bit key to encrypt transmitted data. Larger WEP key length will provide higher level of security, but the throughpu t will be lower. Key Format You may select to select ASCII Characters (alphanumeric format) or Hexadecimal Di gits (in the ...

  • Sitecom WL-130 - page 21

    Wireless Range Extender (WL-130) Configuration 19 WPA pre-sh ared key Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key to authenticate wireless stations and encrypt da ta during communication. It uses TKIP or CCMP(AES) to change t he encryption key freque ntly. So the encryption key is not easy to break. T ...

  • Sitecom WL-130 - page 22

    Wireless Range Extender (WL-130) Configuration 20 transmitted in the wireless n etwork. Fill the text box by following the rules below. Hex: input 64-digi t Hex values (in the “A-F”, “a-f” and “0-9” range) or at least 8 character pass phrase as the pre-shared keys. Click the Apply button at the bottom of the screen to save the above con ...

  • Sitecom WL-130 - page 23

    Wireless Range Extender (WL-130) Configuration 21 peer automatically. RADIUS Server IP address The IP address of exter nal RADIUS server. RADIUS Server Port The service port of the external RADIUS server. RADIUS Server Password The password used by external RADIUS server. Click the Apply button at the bottom of the screen to save the above configur ...

  • Sitecom WL-130 - page 24

    Wireless Range Extender (WL-130) Configuration 22 Advanced Setting You can set advanced parameters of this access point. The parameters include Authen tication Type, Fragment Threshold, RTS Th reshold, Beacon Interval, Tx Operation Rate, Tx Basic Rate, Preamble Ty pe, Broadcast ESSID. You sho uld not change these parameters unless you know what eff ...

  • Sitecom WL-130 - page 25

    Wireless Range Extender (WL-130) Configuration 23 Beacon Interval The interval of ti me that this access point broadcast a b eacon. Beacon is used to synchronize the wir eless network. Data Rate The “Data Rate” is the rate this access point uses to tr ansmit data packets. The access poi nt will use th e highest possi ble selected trans mission ...

  • Sitecom WL-130 - page 26

    Wireless Range Extender (WL-130) Configuration 24 System Utility From here, you can define the Access Point’s IP Address and Login Password an d enable the Access Point to be a DHCP Server. Parameter Description Current Password Enter the current password (u p to 15-digit alphanumeric string) of the Access Point. The default password for the Acce ...

  • Sitecom WL-130 - page 27

    Wireless Range Extender (WL-130) Configuration 25 Subnet Mask Specify a Subnet Mask for your LA N segment. The Subnet Mask of the Ac cess Point is f ixed and t he va lue is 255.255.255.0 . Gateway Address The IP address of the default ga teway of the subnet that this access point resides in. It allows this access poin t be accessed by PC from a def ...

  • Sitecom WL-130 - page 28

    Wireless Range Extender (WL-130) Configuration 26 Back-up The back-up screen allo ws you to save ( Backup ) the Access Poin t’s current configuration setting. Saving the configuration settings pr ovides an added protection and convenience should problems occur with the Access Point and you have to reset to factory default. When you save the confi ...

  • Sitecom WL-130 - page 29

    Wireless Range Extender (WL-130) Configuration 27 Firmware Upgrade This page allows you to upgrade the Access Point’s firmware. Parameter Description Firmware Upgrade This tool allows you to upgr ade the Access Point’s system firmware. To upgrade the firmware of your Access Point, you need to download the firmware f ile to your local hard disk, ...

  • Sitecom WL-130 - page 30

    Wireless Range Extender (WL-130) Configuration 28 Reset You can reset the Access Point’s system shou ld any problem exist. The reset functi on essentially Re-boots your Access Point’s system. Parameter Description Reset In the event that the system stops responding cor rectly or in some way stops functioning, yo u can perform a reset. Your set ...

  • Sitecom WL-130 - page 31

    Troubleshooting This chapter provides solutions to problem s usually encou ntered during the installati on and operation of the Access Point, and answ ers to some f requently asked question s. How to manually find your PC’s IP and MAC Address? 1) In Windows, open the Command Prompt program 2) Type Ipc onfig /all and Enter  Your PC’s IP addre ...

  • Sitecom WL-130 - page 32

    Federal Communication Com mission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ...

Manufacturer Sitecom Category Wifi repeater

Documents that we receive from a manufacturer of a Sitecom WL-130 can be divided into several groups. They are, among others:
- Sitecom technical drawings
- WL-130 manuals
- Sitecom product data sheets
- information booklets
- or energy labels Sitecom WL-130
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sitecom WL-130.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sitecom WL-130, service manual, brief instructions and user manuals Sitecom WL-130. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sitecom WL-130.

Similar manuals

A complete manual for the device Sitecom WL-130, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sitecom WL-130 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sitecom WL-130.

A complete Sitecom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sitecom WL-130 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sitecom WL-130, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sitecom WL-130, that we can find in the current document
3. Tips how to use the basic functions of the device Sitecom WL-130 - which should help us in our first steps of using Sitecom WL-130
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sitecom WL-130
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sitecom WL-130 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sitecom WL-130?

Use the form below

If you did not solve your problem by using a manual Sitecom WL-130, ask a question using the form below. If a user had a similar problem with Sitecom WL-130 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)