English dropdown-ico

Manual TP-Link Archer C7

146 pages Not applicable
Download

Go to site of 146

Summary
  • TP-Link Archer C7 - page 1

    Archer C7 AC1750 Wireless Dual Ban d Gigabit Rout er R EV1.0.0 1910010809 ...

  • TP-Link Archer C7 - page 2

    COPYRIG HT & TRADEMARKS S pecifications are subject t o change without notice. is a registered trade mark of TP - LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered tradem arks of their res pective holders. No part of the specifications m ay be reproduced in any form or by any means or used to make any deri ...

  • TP-Link Archer C7 - page 3

    FCC S T A TEMENT This equipment has bee n tested and found t o comply with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to provide r easonable protec tion against harmf ul interference i n a residential installation. This equipment generat es, uses and can radiate radio frequenc y energy ...

  • TP-Link Archer C7 - page 4

    CE Mark W arn ing This is a class B product. In a domesti c environment, this product may caus e radio interfere nce, in which case the user m ay be required to take adequate m easures. National R estrictions This device is int ended for home and office use in all EU countries (and other countries f ollowing the EU directive 199 9/5/EC) without a n ...

  • TP-Link Archer C7 - page 5

    Canadian Compliance St atement This device compli es with Industry Canada l icense - exempt RSS standard(s). Operation i s subject to the following t wo conditions : (1) This device m ay not cause interfere nce, and (2) This device m ust accept any interferenc e, including interfe rence that may caus e undesired operation of the devic e. Cet appare ...

  • TP-Link Archer C7 - page 6

    安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用，以確 ...

  • TP-Link Archer C7 - page 7

    TP - LI NK TECHNOLOG IES CO., L TD TP- LINK TECHNOLOGIES CO., L TD. Building 24 (floors 1, 3, 4, 5) , and 28 (floors 1 - 4) Central S cience and T echn ology Park, Shennan Rd, Nanshan, Shenzhen, China DECL ARA TION OF CONF ORMITY For the following equi pment: Product Descri ption: AC1750 Wireles s Dual Band Gigabi t Router Model No.: C7 T rademark: ...

  • TP-Link Archer C7 - page 8

    - I - CONTENTS Package Contents ..................................................................................................... 1 Chapter 1. Introduction ......................................................................................... 2 1.1 Overview of the router ....................................................................... ...

  • TP-Link Archer C7 - page 9

    - II - 4.7.1 Wireless Setti ngs .......................................................................................... 47 4.7.2 WPS ............................................................................................................. 49 4.7.3 Wireless Securit y ............................................................................ ...

  • TP-Link Archer C7 - page 10

    - III - 4.16 Advanc ed Routing .................................................................................................... 99 4.16.1 S tatic Routing List ......................................................................................... 99 4.16.2 S ystem Routing T able ................................................................ ...

  • TP-Link Archer C7 - page 11

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 1 - Package Contents The following i tem s should be found in your packag e:  Archer C7 AC175 0 Wireless Dual Band Gigabit Router  DC P ower Adapter f or Archer C7 AC1750 Wireless Dual Band Gigabit Ro ut er  Quick Installation Gui de  Resource CD for A rcher C7 AC1750 W ireless Dual ...

  • TP-Link Archer C7 - page 12

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 2 - Chapter 1. Introduction 1.1 Overview of th e router The Archer C7 A C1750 Wireless Dual Band Gi gabit Router integrates 4- port Swit ch, Firewall, N AT - router and Wireless AP . Powered by 3x 3 MIMO technology , t he AC1750 Wireless Dual Band Gigabit Router delivers except ional range and s ...

  • TP-Link Archer C7 - page 13

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 3 - 1.2 Conventions The rout er or Archer C7 menti oned in t his gui de stands for Archer C7 AC1750 Wireless Dual Band Gigabit Router without any explanat ion . 1.3 Main Features  Complies wit h IEEE 802.1 1 ac .  One 10/100/1000M Auto - Negotiat ion RJ45 Internet port, four 10/100/1000M A ...

  • TP-Link Archer C7 - page 14

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 LEDs on t he front panel The router ’s LEDs are located on the front panel (View from left to right) . Name St atus Indication ( Power ) Off Power is o ff . On Power is on . (System) On T he router is initializing or maybe has a system erro ...

  • TP-Link Archer C7 - page 15

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 5 - ( WPS ) Slow Flash A wireles s device is connect ing to the network by WPS function. T his process will las t in the first 2 minutes. On A wireless device has been success fully added to the network by WPS function . Quick Flash A wireles s device fail ed to be added to the netwo rk by WPS f ...

  • TP-Link Archer C7 - page 16

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 6 -  Internet : This port is where you wi ll connect the DSL/cable Modem , or Ethernet .  Ethernet (1 , 2, 3, 4 ): These ports ( 1 , 2, 3, 4 ) connect the router to the local PC(s) .  WPS/ R eset : Pressing thi s button for less than 5 seconds enable s the WPS f un ction. If you r clien ...

  • TP-Link Archer C7 - page 17

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 7 - Chapter 2. Connecting the router 2.1 System Require ment s  B roadband Internet Access Service (DSL/ Cable/Ethernet)  One DS L/Cable Modem that has an RJ45 connec tor (which is not necessary if the rout er is connected direct ly to the Ethernet)  PC s wi th a working Ethernet Adapte ...

  • TP-Link Archer C7 - page 18

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 8 - power on the Route r . (Bef ore you power on the R outer , pl ease make sure your c omputer is NOT connected to any other wireles s network.) Figure 2-1 Hardware I nstallation Figure 2-2 USB Installation  Note: If you want to use the router to share fil es or printer , plug t he USB stora ...

  • TP-Link Archer C7 - page 19

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 9 - Chapter 3. Quick Inst allation Guide This chapter will show you how to confi gure the basic functions of your AC1750 W ireless Dual Band Gigabit Rout er using Quick S etup Wiz ar d within m inutes. 3.1 TCP/IP C onfigurati on The default IP address of the router is 192.168.0.1 and the default ...

  • TP-Link Archer C7 - page 20

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 10 -  If the resul t displayed is s imilar to F igure 3-2 , it means t he connection bet ween your PC and the router fail ed . Figure 3-2 Failure res ult of Ping command Please check the con nection follow ing these steps: 1. Is the connecti on between your PC and the router correc t?  Not ...

  • TP-Link Archer C7 - page 21

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 - 3.2 Quick Installation Guide With a Web - based utility , it is easy to configure a nd manage the AC1750 Wireless Dual B and Gigabit Router . The Web - based utility can be used on any Win dows, Mac intosh or UNIX OS with a Web browser , suc h as Microsoft Internet Explorer , Mozilla Firefo ...

  • TP-Link Archer C7 - page 22

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 12 - Figure 3-5 Quick Setup 3. Click Next , and then WAN Connecti on Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connect ion Type The router provides Auto - Detect function and supports thre e popular ways PPPoE , Dynamic IP , and Static IP and to connect to the Internet. It’ s ...

  • TP-Link Archer C7 - page 23

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 13 - Figure 3-7 Quick S etup - S tatic IP  I P Address - This is the WAN IP address as seen by external users on the Internet (including your IS P). Your ISP will provide you with the IP address you need to enter here. Enter the IP address into the field.  S ubnet Mask - The Subn et Mask i ...

  • TP-Link Archer C7 - page 24

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 14 -  Con firm Password - Enter t he password agai n to make sure t hat the password i s correct. Check the radio butt on of Dynamic / Static IP to activate the secondary connection i f your ISP provides an extra Conne ction type suc h as Dynamic/Stat ic IP to connect to a local area network. ...

  • TP-Link Archer C7 - page 25

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 15 - 5) I f the connect ion type detected is PP TP /Russia n PP TP , t he next screen wil l appear as shown in Figure 3- 10 . Configure the foll owing parameters and then c lick Next to continu e. Figure 3- 10 Quick Setup – L2TP/Russ ia L2 TP  User Nam e / Passw ord - Enter t he User Name a ...

  • TP-Link Archer C7 - page 26

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 16 - Figure 3- 11 Quick Setup – Dual Band Selec tion  2. 4GHz - Y ou can use the 2.4GHz band t o connect to many clas sic wireless devic es like gaming consoles , laptops, DVRs, ect.  5GHz - T his band is less crowded a nd is used for time - sensitive mus ic, video streaming or gaming. U ...

  • TP-Link Archer C7 - page 27

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 17 -  Regi on - S elect your region f rom the drop - down lis t. This field spec ifies the regio n where the wireles s function of the rout er can be used. It may be illegal to use the wireless func tion of the router in a region other tha n one of those s pecified in t his field. If your cou ...

  • TP-Link Archer C7 - page 28

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 18 -  Chan nel - This fi eld determines which operati ng frequency will be us ed. It is not necessary to change t he wireless channel unless you notice i nterference problem s with another nearby acces s point. If you select “ A uto ” , then the AP will select the best channel automat ica ...

  • TP-Link Archer C7 - page 29

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 19 -  Disable Securit y - The wi reless security f unction can be enabl ed or disabled. If disabled, the wirel ess stations will be able to connect the router with out encrypt ion.  Enable Securit y ( WPA - PSK/WPA2 - PSK) – It ’ s selec ted by default, with the default PSK pass word t ...

  • TP-Link Archer C7 - page 30

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 20 - Chapter 4. Configuring the rout er This chapter wil l show each Web page's key functions and the c onfiguration way . 4.1 Login After your successful login, you wil l see the main menus on the left of the Web - based utility . On the right, there are the c orresponding explanati ons an ...

  • TP-Link Archer C7 - page 31

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 21 - Figure 4-1 S tatus ...

  • TP-Link Archer C7 - page 32

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 22 - 4.3 Quick Setup Please refer to 3. 2 Quick Installation Guide . 4.4 Network Figure 4-2 the Network menu There are three subm enus under the Network m enu (shown in Fi gure 4-2 ): WA N , LAN a nd MAC Clone . Click any of them, and you wil l be able to configure t he corresponding function. 4 ...

  • TP-Link Archer C7 - page 33

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 23 - This page displays the W AN IP p arameters assigned dynami cally by your ISP , including IP addr ess, S ubnet Mask, Default Gat eway , etc. Clic k the Re new button to renew the IP parameters from your ISP . Click the Release button t o release the IP parameters.  MTU Size - The normal M ...

  • TP-Link Archer C7 - page 34

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 24 -  S ubnet Mask - Enter the subnet Mask in dotted - decim al notation provide d by your IS P , usually is 255.255. 255.0.  Defaul t Gatewa y - (Opt ional) Enter t he gateway IP address in dott ed - decimal notation provided by your ISP .  M TU Size - The normal MTU (Maximum T ransmis ...

  • TP-Link Archer C7 - page 35

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 25 -  Disabled - The S econdary Connection i s disabled by default , so there is PPPoE connection only . This is recomm ended.  Dynamic IP - Y ou can check this radio but ton to use D yna mic IP as the sec ondary connection t o connect to the loc al area network provide d by ISP .  St a ...

  • TP-Link Archer C7 - page 36

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 26 - Figure 4-6 PPPoE Advanced Set tings  MTU Size - The default MTU size is “ 1480 ” bytes, which is usually f ine . It i s not recommended that you change the default MTU S ize unless required b y your ISP .  S ervice Name/AC Nam e - The servi ce name and AC (Ac cess Concentrator) na ...

  • TP-Link Archer C7 - page 37

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 27 - Figure 4-7 WA N - BigPond Cable  User N ame/Passw ord - Enter the User Name an d Password provi ded by your ISP . These fields are case - s ensitive.  Auth Server - Enter t he authenticating s erver IP address or host name.  Auth Domain - T ype in the domain suffix server name base ...

  • TP-Link Archer C7 - page 38

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 28 -  Connect Manually - Y ou can c lick the Connect / Disconnect button to connect / dis connect immediately . This mode also supports the Max I dle Time funct ion as Connect on Demand mode. T he Int ernet connecti on can be di sconnected autom atically after a specified inactivity period an ...

  • TP-Link Archer C7 - page 39

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 29 -  D ynamic IP/ St atic IP - Choose eit her as you are given by your ISP . Click the Connect button to connect immediately . Clic k the Disconnect butt on to disc onnect immediately .  Con nect on Demand - Y ou can configure the router to disconnect from your Internet connection after a ...

  • TP-Link Archer C7 - page 40

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 30 - Figure 4-9 PPTP Settin gs  User N ame/Passw ord - Enter the Us er Name and Pass word provided by your ISP . These fields are case - s ensitive.  D ynamic IP / St atic IP - Cho ose either as you ar e given by your ISP and enter the IS P’s IP address or the domain na me. If you choose ...

  • TP-Link Archer C7 - page 41

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 31 - Interne t connect ion to remain active at al l times, enter “0” in the Max Idle T ime field. Otherwise, enter t he number of minutes you want to have elapsed before yo ur Internet connection term inates.  Con nect Automaticall y - Connect automatically after the rout er is disconnect ...

  • TP-Link Archer C7 - page 42

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 32 - Figure 4- 10 LAN  M AC Address - The physical addres s of the router , as seen from the LAN. The value can't be changed.  I P Address - Enter the IP address of your router or res et it in dotted - deci mal notation (factory defaul t: 192.168. 0 .1).  S ubnet Mask - An addres s ...

  • TP-Link Archer C7 - page 43

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 33 -  WAN M AC Address - This f ield displays the current M AC address of the Intern et port . If your ISP requires you to register t he MAC addres s, please enter the c orrect MAC addre ss into this field in XX - XX - XX - XX - XX - XX f ormat (X is any hexadecimal digit ).  Y our PC&apos ...

  • TP-Link Archer C7 - page 44

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 34 - 4.6 Wireless 2.4GHz Figure 4- 13 Wireles s menu There are six s ubmenus under the Wireless menu (s hown in Figure 4- 13 ): Wireless Settings , WPS , Wireless Security , Wireless MAC Filtering , Wireless Advan ced and Wireless St atistics . Click any of them, and you will be able t o configu ...

  • TP-Link Archer C7 - page 45

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 35 -  Regi on - Select your region from t he drop - down list. This field s pecifies the region where t he wireless functi on of the router can be used. It may be illegal to use the wireless fun c tion of the router in a regio n other than one of those speci fied in this fiel d. If your count ...

  • TP-Link Archer C7 - page 46

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 36 -  E nable SSID Broadca st - When wi reless client s survey the local area for wireles s networks to associate with, they will detect the SSI D broadcast by the router . If you select the Enable SSID Broadcast c heckbox, the Wireles s router will broadcast its name (SSID) on the air .  ...

  • TP-Link Archer C7 - page 47

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 37 - Figure 4- 16 WPS  WPS St atus - Enable or disable the WP S function here.  Cur rent PIN - The current val ue of the router 's PIN is dis played here. The default PIN of the router can be f ound in the label or User Guide.  Restor e PIN - Restore t he PIN of the router to its d ...

  • TP-Link Archer C7 - page 48

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 38 - Figure 4- 17 Figure 4- 18 Add A New Devic e Step 2: P ress and hold the WPS butt on of the client devi ce. Step 3: The Wi - Fi Protected Setup LED flas hes for two minutes during the Wi - Fi Protec ted Setup process. Step 4: When t he WPS LED is on, the cli ent device has succes sfully conn ...

  • TP-Link Archer C7 - page 49

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 39 - III. E nter the router ’ s PI N on your client device Use this method if your c lient device as ks for the router ’ s PIN number . Step 1: On the client device, ent er the PIN number listed on the rout er ’ s Wi - Fi Protected S et up screen , shown in F igure 4- 16 (It is also labele ...

  • TP-Link Archer C7 - page 50

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 40 -  Di sable Securit y - If you do not want to use wireless security, check this radio button. B ut it ’ s strongly recom mended to choose one of the f ollowing modes to enable secur ity.  W PA / W PA 2 - Personal - It ’s the W PA /WPA2 authentic ation type base d on pre - shared pas ...

  • TP-Link Archer C7 - page 51

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 41 - Figure 4- 22 WP A/WP A2 - Enterprise • Radius Server I P - Enter the IP address of the Radius s erver. • Radius Port - E nter the port number of t he Radius server . • Radius Passw ord - Enter the password for the R adius s erver. • Group Key Update Period - S pecif y t h e group ke ...

  • TP-Link Archer C7 - page 52

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 42 - • Ke y T ype - You can select the WEP key length (64 - bit, or 128 - bit, or 152 - bit.) for encryption. "Di sabled" means this WEP key entry is invalid. 64 - bit - You can enter 10 hexadecimal digit s (any combination of 0 - 9, a- f, A - F, zero key is not promoted ) or 5 A SCI ...

  • TP-Link Archer C7 - page 53

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 43 - Figure 4- 25 Add or Modify Wireless MAC Address Filtering entr y To add or modify a MAC Address F iltering entr y, follow these instruction s: 1. Enter the appropriat e MAC Address into t he MAC Address fi eld. The format of the MAC Address is XX - XX - XX - XX - XX - XX (X is any hexadecim ...

  • TP-Link Archer C7 - page 54

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 44 - 2. Selec t the radio button “ Allow the en tries specified b y an y enabled entri es in the lis t to access ” for Fi ltering Rules . 3. Delete al l or disable all en tries if there are any ent ries already. 4. Clic k the Add New ... button . 1) E nter the MA C address 00 - 0A - EB -B0-0 ...

  • TP-Link Archer C7 - page 55

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 45 -  Beacon Interval - Enter a value between 20 - 10 00 milliseconds for Beacon I nterval here . The beacons are the packets s ent by the router to sync hronize a wireless network. B eacon Interval value determ ines the tim e interval of the beacons . The default value i s 100.  RTS Thres ...

  • TP-Link Archer C7 - page 56

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 46 - Figure 4- 27 Wireles s S t atistics  MAC Address - The c onnected wireles s station's MAC addres s  Current Status - T he connected wireless station's running stat us , one of STA - AUTH/ STA - ASSOC/ STA - JOINED/ WP A/ WP A - PSK/ WPA2/ WPA2 - PSK/ AP - UP/ AP - DOWN/ Disc ...

  • TP-Link Archer C7 - page 57

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 47 - 4.7.1 Wireless Settings Choose menu “ Wirele ss 5 GHz → Wireless Settings ” , you c an configure t he basic setti ngs for the wireless net work of 5 GHz on t his page . Figure 4- 29 Wireles s Settings – 5GHz  Wi reless Netw ork Name - Also called the SSID ( Service Set Id entific ...

  • TP-Link Archer C7 - page 58

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 48 -  Mode - Sel ect the desired mode.  11 a only - Select if all of your wirel ess clients are 802.11 a. When 802.1 1 a mode is selected , onl y 802.11 a wireles s stations c an connect to the router .  11n only - Select only if all of your wirel ess clients are 802.11n . When 802.11n ...

  • TP-Link Archer C7 - page 59

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 49 -  WEP Index - This option shoul d be chosen if the key type is WEP(ASCII) or WEP(HEX).I t indicates the index of t he WEP key.  Auth Type - This option s hould be chosen if the key type is WEP(ASCII) or WEP(HEX).I t indicates the authoriz ation type of the Root A P.  P assword - If ...

  • TP-Link Archer C7 - page 60

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 50 - I. Use the Wi - Fi Pr otected Setup Button Use this method if your c lient device has a Wi - Fi Protected S etup button . Step 1: Press t he WPS /Rese t bu tton on the bac k panel of the router , as shown in Fi gure 4- 32 . Y ou can also kee p the default WP S s tatus as Enab led and c lick ...

  • TP-Link Archer C7 - page 61

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 51 - Step 2: Enter the P IN number from the cli ent device in the field on the above WPS screen. Then click Connect button. Step 3: “ Connect succes sfully ” will appear on the s creen of Figure 4- 34 , which means the client device has succ essfully connected t o the router . III. E nter th ...

  • TP-Link Archer C7 - page 62

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 52 - Figure 4- 35 Wireles s Security  Di sable Secur ity - If you do not want to us e wireless securit y, check this radio but ton. But it ’ s strongly recom mended to choose one of the f ollowing modes to enable secur ity.  W PA / W PA 2 - Personal - It ’s the W PA/WPA2 authenticat io ...

  • TP-Link Archer C7 - page 63

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 53 - Figure 4- 36 WP A/WP A2 – Personal • PSK Pass word - You can enter AS CII characters between 8 and 63 chara cters or 8 to 64 Hexadecimal characters. T he def ault password is the same with the default PIN code, which is labeled on t he bottom of the router or can be found in F igure 4- ...

  • TP-Link Archer C7 - page 64

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 54 -  WEP - It is based on the IEEE 802. 11 standard . I f you check this radio button, you will f ind a notice in red as s how in Figure 4- 38 . Figure 4- 38 WEP • Type - you can choose the type f or the WEP security on the drop - down li st. The default setting is A utomatic , which can s ...

  • TP-Link Archer C7 - page 65

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 55 - 4.7.4 Wireless MAC Filtering Choose menu “ Wireless → MAC Filtering ” , you can c ontrol the wireless access by configur ing the Wireless MAC Fil tering function, shown in Figure 4- 24 . Figure 4- 39 Wireles s MAC Filtering T o filter wirel ess users by MAC Address , click Enable . Th ...

  • TP-Link Archer C7 - page 66

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 56 - 1. Enter the appropriat e MAC Address into t he MAC Address field. The format of the MAC Address is XX - XX - XX - XX - XX - XX (X is any hexadecimal digit). For example: 00 - 0A - EB - B0 - 00 - 0B. 2. Give a sim ple description f or the wi reless station in the Descr iption f ield. For ex ...

  • TP-Link Archer C7 - page 67

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 57 - 4.7.5 Wireless Advanced Choose menu “ Wireles s → Wireless Advance d ” , you can confi gure the advanc ed s ettings of your wireless net work. Figure 4- 41 Wireles s Advanced  Transmit Pow er - Here you can specify the t ransmit power of router . You can select High, Middle or Low ...

  • TP-Link Archer C7 - page 68

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 58 - (DTIM). A DTIM field i s a countdown fiel d informing cl ients of the next wi ndow for list ening to broadcast and mult icast messages. When t he router has buf fered broadcast or mult icast messages for ass ociated client s, it sends the next D TIM with a DTI M Interval value. You can spec ...

  • TP-Link Archer C7 - page 69

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 59 -  Note: This page will be refres hed automatic ally every 5 seconds . 4.8 Guest Network Figure 4- 43 The Guest Network m enu There are two submenus under th e Guest Network menu (s hown in Figure 4- 43 ) : Wireless Settings and Storage Sharing . Clic k either of them, and you will be able ...

  • TP-Link Archer C7 - page 70

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 60 -  Allow Guest T o Access M y Local Network - If enabled, gues ts can communicate with hosts.  Enable Guest Ne twork Bandw idth Control - If enabled, the Gues t Network Bandwidth Control rules wil l take effect.  Egress Bandw id th For Guest Network - The upload speed through the W A ...

  • TP-Link Archer C7 - page 71

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 61 -  Confirm Passwo rd - Re - enter the password here.  Storage Authority - Aut hority of user: Read Onl y or Read and Write.  Name - This folder's display name.  Pa rtition - The volum e that the folder resides. V olume 1 - 8 is mappi ng to USB port 1, V olume 9- 16 is mapping ...

  • TP-Link Archer C7 - page 72

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 62 - 4.9 DHCP Figure 4- 47 The DHCP menu There are three subme nus under the DHCP menu (shown in Figure 4- 47 ) : DHCP Settings , DHCP Client s List and Address Rese rvation . Cl ick any of them, and you will be able to configure the c orresponding funct ion s. 4.9.1 DHCP Settings Choose menu ? ...

  • TP-Link Archer C7 - page 73

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 63 -  Add ress Lease Time - The Address Lease Time is the amount of time a network user will be allowed connecti on to the router with their curre nt dynamic IP A ddress. Enter the am ount of time in minut es and t he user w ill be "leased " t his dynamic IP Address. A fter the time ...

  • TP-Link Archer C7 - page 74

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 64 - 4.9.3 Address Reservation Choose menu “ DHCP → Address Reservatio n ” , you can view and a dd a reserved addres s for clients via the next screen (shown i n Figure 4- 50 ). When you spec ify a reserved IP address for a PC on the LAN, t hat PC will always r eceive the same IP address e ...

  • TP-Link Archer C7 - page 75

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 65 - 1. Click the Modify in the entry you wa nt to modify . If you want to del ete the entry , click the Delete . 2. Modif y the inform ation. 3. Click the Save button. Click the Enable / Disable All button to mak e all entries enabled / disabled Click the Delete All butt on to delete all entrie ...

  • TP-Link Archer C7 - page 76

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 66 -  S ervice Status - Indicates the Network Sharing service's c urrent status. Y ou ca n c l ick the Start button to s tart the Storage Sharing servi ce and cli ck the Stop butt on to stop it .  Volume - The vol ume name of the USB drive t he users have acc ess to. V olume 1 - 8 is ...

  • TP-Link Archer C7 - page 77

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 67 - 2. The new settings wi ll not take effec t until you restart the service. 3. To unplug the USB dri ve, click Eject Disk but ton first. Sim ply pulling USB drive out of the USB port can cause dam age to the device and los s of data. 4. Mounted volumes of each USB port are subject to the 8 - ...

  • TP-Link Archer C7 - page 78

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 68 - 3. S pecify a port for t he FTP server to use ( The default port number is 21). 4. The Internet Address displa ys the WAN IP address of this router, s o that other us ers can access FTP via this addres s. 5. If WAN type is PPP o E/PPTP /L2TP, two connections wil l be available. Theref ore, ...

  • TP-Link Archer C7 - page 79

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 69 - Figure 4- 57 Media S erver Setting  S erver Name - The name of t his Media Server.  S erver Status - Indic ates the Media S erver ’s current st atus, started or stopped . Y ou can c lick the S tart button to start t he Media Server and c lick the Stop button to stop it .  Nam e - ...

  • TP-Link Archer C7 - page 80

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 70 - Figure 4- 59 Media S erver Setting 3. Click the Add share folder button to s pecify a folder as the s earch path of media s erver. T he screen will then appear as shown in Figure 4- 60 . Figure 4- 60 Add New Fol der  Display Name - You can enter a display name f or the share f older.  ...

  • TP-Link Archer C7 - page 81

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 71 -  Back - C lick th is button t o discard the sett ings and just go to the m edia server configurat ion page. 4. Click the Scan All button t o scan all the share folders immediately. You can als o select the Auto - scan , at sam e time , select an auto scan interval tim e by drop - down li ...

  • TP-Link Archer C7 - page 82

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 72 - Figure 4- 62 User Ac count Management Only Adminis trator can use a Web browser to tra nsfer the fil es from a PC to the Writable shared volume on the USB dri ve. T o add a new user account, please fol low the steps belo w : 1. C lick Add New User but ton, and the screen wi ll appear as sho ...

  • TP-Link Archer C7 - page 83

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 73 -  User Nam e - Type the us er name that you want to give access to the USB drive. The user name must be compos ed of alphanumeric symbols not exceedin g 15 characters in l ength.  P assword - Ent er the password i n the Password f ield. The pass word must be compos ed of alphanumeric s ...

  • TP-Link Archer C7 - page 84

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 74 -  Di sabl e NAT Control - If disabled, neither NAT f unction nor Forwarding conf iguration will take effect.  E nable Hardw are NAT Control - If enabled, t he Hardware NAT f eature will take ef fect.  Di sable Hardw are NAT Control - If dis abled, neither Hardw are NAT feature will ...

  • TP-Link Archer C7 - page 85

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 75 -  I nternal Port - The I nternal Service Port number of the PC running the s ervice applicat ion. Y ou can leave it blank if the Internal Port is the same as the Service Port , or enter a specific port number w hen Service Port is a single one.  IP Addr ess - The IP address of the PC r ...

  • TP-Link Archer C7 - page 86

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 76 - To modify or delete an exi sting entry: 1. Find the desired entr y in the table. 2. Click Modify or Delete as desired on t he Modify column. Click the Enable / Disable All button to mak e all entries enab led / dis abled . Click the Delete All butt on to delete all entries . Click the Next ...

  • TP-Link Archer C7 - page 87

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 77 - 4. Select the protocol us ed for Incoming Ports from the Incoming Protocol drop - down list, either TCP or UDP , or All. 5. Select E nable d in Status field . 6. Click the Save button to save the ne w rule. Figure 4- 69 Add or Modify a T riggering Entry  T rigger Port - The port for outg ...

  • TP-Link Archer C7 - page 88

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 78 - Clic k the Enable All button t o make all entries enabled . Click the Disable All button to make all ent ries disabled. Click the Delete All butt on to delete all entries Once the router i s configured, the operation is as follow s: 1. A loc al host makes an outgoing connect ion to an exter ...

  • TP-Link Archer C7 - page 89

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 79 - 3. Click the Save button. 4.12.4 UPnP Choose menu “ Forwarding → UPnP ” , and then yo u can view the information about UPnP in the screen (shown in Figure 4- 71). The Universal Plu g and Play (UPnP) feature all ows the devices, such as Internet comput ers, to access the local host res ...

  • TP-Link Archer C7 - page 90

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 80 - 4.13 Security Figure 4- 72 The Security menu There are four submenu s under the Securit y menu as shown in Fi gure 4- 72 : Basic Securi ty , Advanced Securit y , Loc al Management and Remote Management . Click any of them, and yo u will be able to conf igure the correspondi ng function s. 4 ...

  • TP-Link Archer C7 - page 91

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 81 -  VPN - VPN Pas sthrough must be e nabled if you want to allow VPN t unnels using VPN protocols to pass through the router .  PPTP Passthrough - Poi nt - to - Point Tunneling Prot ocol (PPTP ) allows the Point - to - Point P rotocol (PPP) to be tunneled thr ough an IP network. To allow ...

  • TP-Link Archer C7 - page 92

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 82 - Figure 4- 74 Advanced Security  Packets Statisti cs Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop - dow n list. The Pack ets S tatistic s I nterval value indi cates the tim e section of the packets statistic s . The result of the statist ...

  • TP-Link Archer C7 - page 93

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 83 -  E nable TCP - SYN - FLOOD Attack Fi ltering - Enable or Dis able the TCP - SYN - FLOOD Attack Filteri ng.  TCP - SYN - FLOOD Packets T hreshol d (5~3600) - The default value is 50. Ent er a value between 5 ~ 3600. When the current TCP - SYN - FLOOD Packets numbers is beyon d the set ...

  • TP-Link Archer C7 - page 94

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 84 - use the password to browse t he built - in web pages t o perform Administrator tas ks while all the others will be bloc ked. After click th e Add button, your PC's M AC Address will be placed in the l ist above. Click the Save button to save you r settings.  Note: If your PC is bloc ...

  • TP-Link Archer C7 - page 95

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 85 - 4.14 Parent al Control C hoose menu “ Parental Control ” , and then you can c onfigure the parental control in the sc reen as shown in Fi gure 4- 77 . The Parental Control function can be used to control the internet activities of the child, limit the chi ld to access certain websi tes ...

  • TP-Link Archer C7 - page 96

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 86 -  Parental Control - Check Enable if you want thi s function to tak e effect ; otherwise , check Disable .  MAC Addre ss of Parental P C - In this field, enter the MAC address of the controlling PC, or you can make us e of the Copy To Above button below.  MAC Address of Your PC - Th ...

  • TP-Link Archer C7 - page 97

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 87 - 1. Click “ Parental Control ” menu on the left to enter the Parental Control S ettings page. Check Enable and enter the M AC address 00 - 11 - 22 - 33 - 44 - BB in the MAC Address of Parental PC field. 2. Click “ Access Control → S chedule ” on the left to enter t he Schedule Sett ...

  • TP-Link Archer C7 - page 98

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 88 - 4.15.1 R ule C hoose menu “ Ac cess Control → Rule ” , and then you can view and set Access Control rules i n the screen as s hown in Figure 4- 81 . Figure 4- 81 Access Control Rule Management  Enable Internet Acc ess Control - Select the check box to enable the Internet Acc ess Co ...

  • TP-Link Archer C7 - page 99

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 89 -  Move - You can change t he entry’s order as des ired. Enter in t he first box the ID num ber of the entry you want t o move and in the sec ond box another ID numbe r, and then clic k the Move button to change the entri es’ order. Click the Next button to go to the nex t page . C lic ...

  • TP-Link Archer C7 - page 100

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 90 - Figure 4- 83 Quick Setup – Create an Access T arget E ntry  Targ et Description - In this f ield, create a descri ption for the target. Note that thi s description should be u nique (e.g. Target_1) .  Mode - Here are t wo options, IP Addres s and Domain Name. You c an choose either ...

  • TP-Link Archer C7 - page 101

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 91 - Fi gure 4- 84 Quick S etup – Create an A dvanced Schedule E ntry  Sch edule Description - In this field, create a desc ription for the schedul e. Note that this description should be u nique (e.g. Schedule_1 ) .  Da y - Cho ose Select Days and select the certain day (da ys), or choo ...

  • TP-Link Archer C7 - page 102

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 92 -  Rul e - In this field, creat e a name for the rule. Note that this name shoul d be unique (e.g. Rule_1) .  Host - In t his field, selec t a host from the drop - do wn list for the rule. T he default value i s the Host Descripti on you set just now.  Targ et - In this filed, sel ec ...

  • TP-Link Archer C7 - page 103

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 93 - For exam ple : If you des ire to allow the host with MAC address 00 - 11 - 22 - 33 - 44 - AA to access www .g oogle.com only f rom 18:00 to 20:00 on Saturday and Sunday , and for bid other hosts in the LAN to access the I nternet, you should fol low the settings below: 1. Click the s ub men ...

  • TP-Link Archer C7 - page 104

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 94 - Figure 4- 87 Host S ettings  Host Descrip tion - Here displays the description of the host and this des cription is unique .  Information - Here displays the i nformation about t he host. It can be IP or MA C.  Modify - To modify or delete an exis ting entry. T o add a new entry, p ...

  • TP-Link Archer C7 - page 105

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 95 - Figure 4- 89 Add or Modify a Host Entry For example : If you des ire to restrict the internet ac tivities of host with MA C address 00 - 11 - 22 - 33 - 44 - AA, you should f irst follow the s ettings below: 1. Click Add New... button in Figure 4- 87 to enter the Add or Modify a Host Entry p ...

  • TP-Link Archer C7 - page 106

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 96 -  Modify - To modify or delete an exist ing entry. T o add a new entry , pl ease follow the steps below. 1. C lick the Add New … button. 2. In Mode fiel d, select IP Address or D omain Name . 3. I f you select IP Ad dress , the screen shown is Fi gure 4- 91 . Figure 4- 91 Add or Modify ...

  • TP-Link Archer C7 - page 107

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 97 - 1) In Target Descri ption field, c reate a unique descri ption for the target (e. g. Target_1). 2) I n Domain Name field, enter t he domain name, eit her the full nam e or the keywords (for example , go ogle) in the blank . A ny domain name wi th keywords in it ( www . google.com , www .g o ...

  • TP-Link Archer C7 - page 108

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 98 -  Schedule Descriptio n - Here displa ys the desc ription of the schedul e and this des cription is unique .  Da y - Here dis plays the day(s) in a we ek.  Time - Here displays the time period i n a day.  Modify - Here you can edit or delete an exis ting schedule. T o add a new s ...

  • TP-Link Archer C7 - page 109

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 99 - 1. Click Add New ... button shown i n Figure 4- 93 to enter t he Advanced Schedul e Settings page. 2. In Schedule Descripti on fiel d, create a unique descr iption f or the schedule ( e.g. Schedule_1 ) . 3. In Da y field, chec k the Select Days radio button and then select Sat and Sun . 4. ...

  • TP-Link Archer C7 - page 110

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 100 - T o add static routing entries: 1. Click Add Ne w … s hown in Figure 4- 96 , you will see the f ollowing screen. Figure 4- 97 Add or Modify a S ta tic Route Ent ry 2. Enter the following data:  Destination Netwo rk - The Destination Network is the address of the network or host t hat ...

  • TP-Link Archer C7 - page 111

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 101 - Figure 4- 98 System Routing T able  Desti nation Netw ork - The Destinat ion Network is the addres s of the network or host t o which the static route is assigned.  S ubnet Mask - T he Subnet Mask determines which port ion of an IP addre ss is the network portion, and whic h portion ...

  • TP-Link Archer C7 - page 112

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 102 - Figure 4- 100 B andwidth Control Settings  E nable Bandw i dth Contro l - Check this box so that the Bandwidth Control settings can t ake effect.  Line Type - Select the right type for you network connection. I f you don ’ t know how to choose, please ask your IS P for the informat ...

  • TP-Link Archer C7 - page 113

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 103 - T o add /modify a Bandwidth Control rule, follow the steps below . 1. Click Add Ne w … s hown in Figure 4- 101 , you will see a new screen shown i n Figure 4- 102 . 2. Enter the informat ion like the sc reen shown below . Figure 4- 102 B andwidth Control Rule Setti ngs 3. Click the Save ...

  • TP-Link Archer C7 - page 114

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 104 -  MAC Address - The MA C address of the cont rolled computer in t he LAN.  IP Address - The ass igned IP address of t he controlled computer in t he LAN.  Bind - Check this option to enable ARP bi nding for a speci fic device .  Modify - To modify or delete an exist ing entry. W ...

  • TP-Link Archer C7 - page 115

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 105 - Figure 4- 106 Fi nd IP & MAC Binding Entry Click the Enable All button to mak e all entries enabled. Click the Delete All button t o delete all entries . 4.18.2 ARP List T o manage t he computer , you c ould observe the computers in the LAN by checking the relationship of M AC address ...

  • TP-Link Archer C7 - page 116

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 106 - 4.19 Dynamic DNS Choose menu “ D ynamic DNS ” , and you can conf igure the D ynami c DNS function. The router offers the DDNS (Dynamic Domain N ame System ) feature, which al lows the host ing of a website, FTP server , or e - mail server with a fixed domain name (named by yourself) an ...

  • TP-Link Archer C7 - page 117

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 107 - Connection Status - T he status of t he DDNS service connecti on is displayed here. Click Logout to log out of the DDNS service.  Note: If you want to login a gain with another account after a s uccessful login, pl ease click t he Logout button, then input you r new username and pas swo ...

  • TP-Link Archer C7 - page 118

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 108 - 4.19.3 No - ip.com DDNS If the dynamic DNS Service Provi der you select is www. no - ip.com , the page will appear as shown in Figure 4- 11 0 . Figure 4- 11 0 No - ip.com DDNS Settings To set up for DDNS, fol low these instruct ions: 1. Enter the User Name f or your DDNS account. 2. Enter ...

  • TP-Link Archer C7 - page 119

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 109 - There are two submenus under the IPv6 Suppo rt menu (shown in Figure 4- 111 ): I Pv6 St atus and IPv6 Setup . Click either of them, and you will be able to scan or conf igure the correspondi ng function. The detailed explanations f or each submenu are provid ed below . 4.20.1 IPv6 Status F ...

  • TP-Link Archer C7 - page 120

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 0 - 4.20.2 IPv6 Setup Figure 4- 11 3 Enable/Dis able IPv6  Enable IPv6 - T ick the checkbox to enable the IPv6 func tion. It ’ s enabled by default.  W AN Conne ction T yp e - Choos e the correct WAN connection type based on your ISP ne twork topology . • DHCP v6 - Connections which ...

  • TP-Link Archer C7 - page 121

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 111 - 1) DHCPv6 Figure 4- 11 4 DHCPv6  Get non - te mporar y IPv6 address - Get a non - temporary IP v6 address from the I SP.  Get IPv6 prefix delegation - Get a temporary IPv6 address and I Pv6 prefix from t he ISP, the temporary IPv6 ad dress is set to the WAN port, and the LAN port ad ...

  • TP-Link Archer C7 - page 122

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 2 -  Note: If you get Addres s not found error when you acc ess a Web site, it is likely t hat your DNS servers are set up improperl y. You should contac t your ISP to get DNS server ad dresses.  Get IPv6 with Unicast DHCP - A few ISPs' DHCP servers do not support the bro adcast ap ...

  • TP-Link Archer C7 - page 123

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 3 -  IPv6 Addres s - Enter the IPv6 addres s in dotted - dec imal notation provi ded by your ISP.  Default Gatew ay - Enter the def ault gateway in dot ted - decimal not ation provided by y our ISP.  MTU Size - The normal MTU (Maximum Transmission Unit) val ue for most Ethernet netwo ...

  • TP-Link Archer C7 - page 124

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 4 -  User Name/Passw ord - E nter the User Name and P assword provided b y your ISP. Thes e fields are case - s ensitive.  Get IPv6 Address Wa y • G et non - temporar y IPv6 address - Get a non - temporar y IPv6 address by DHCPv6 from the ISP. • G et IPv6 prefix delegati on - Get a ...

  • TP-Link Archer C7 - page 125

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 5 -  Address /Subnet M ask/Default Gat eway - the I Pv4 address/ subnet mask/ default gateway assigned , in dott ed - decimal notation .  MTU Size - T he normal MTU (Maximum Trans mission Unit) value f or most Ethernet network s is 1 48 0 Bytes. For s ome ISPs, you may need to modify th ...

  • TP-Link Archer C7 - page 126

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 6 - Choose menu “ S ystem T ools ” , and you can s ee the submen us under the main menu: Tim e Settings , Diagnostic , Firmware Upgrade , Factor y Defau l ts , Backup & Restore , Re boot , Password , System Log and St atistics . Click any of them, and you wil l be able to configure th ...

  • TP-Link Archer C7 - page 127

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 7 -  Daylight Saving Status - Displays the status whether the Dayli ght Saving is in us e. To set ti me manuall y: 1. Select your local time zone. 2. Enter the Date in Mont h/Day/Y ear format. 3. Enter the Ti me in Hour/Minut e/Second forma t. 4. Click Save . To set ti me automatically: 1. ...

  • TP-Link Archer C7 - page 128

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 8 - Figure 4- 121 Diagnos tic T ools  Diagnostic T ool - Check the radio button t o select one diagnosti c too.  Ping - This diagnosti c tool troubleshoots connect ivity , reachabilit y , and name resolution to a given host or gateway .  T racerout e - This diagnostic tool tests the ...

  • TP-Link Archer C7 - page 129

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 11 9 -  T racerout e Max TTL - Set the maximum number of hops (max TTL to be reached) in the path to search for the target (destinati on). The default is 20. C lick Sta r t t o check the connecti vity of the Internet. T he Diagnostic Resu lt s page displays the resul t of diagnosis. I f the r ...

  • TP-Link Archer C7 - page 130

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 120 - T o upgrade the router 's firmw are, follow these instructi ons b elow : 1. Download a most recent firmware upgrade fi le from our websit e ( www .tp - link.c om). 2. Enter or selec t the path name where you save the downloaded fi le on the computer int o the File blank. 3. Click the ...

  • TP-Link Archer C7 - page 131

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 121 -  Note: All changed set tings will be lost when defaults are restored . 4.21.5 Backup & Restore Choose menu “ Sy stem T ools → Backu p & Restore ” , and then you can save the current configuration of the router as a back up file and restore the c onfiguration vi a a backup ...

  • TP-Link Archer C7 - page 132

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 122 - Some settings of the router will tak e effect only after rebooting, which incl ude • C ha n ge the LAN IP Addres s (system will reboot a utomaticall y). • C han ge the DHCP Settings . • C han ge the Wireless c onfigurations. • C han ge the Web Management P ort. • Upgr ade the fir ...

  • TP-Link Archer C7 - page 133

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 123 - Figure 4- 128 S ystem Log  Auto Mail Feature - I ndicates whet her auto mail feature i s enabled or not.  Mail Setting s - Set the receiving a nd sending ma ilbox address, server address, validation information as well as the timet able for Auto Mail F eature, as shown in Figure 4- 1 ...

  • TP-Link Archer C7 - page 134

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 124 -  Note: O nly when you selec t Authentication , do you have to enter th e User Name and Pass word in the following fi elds. • User Name - Your mail account name filled in the From fiel d. The part behind @ is excluded. • Passw ord - Your mail acc ount password. • Confi rm The Passw ...

  • TP-Link Archer C7 - page 135

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 125 - Figure 4- 130 S tatistic s  Cur rent Statistics Statu s - Enabl e or Disable. The default value is disabled. To enable it , click the Ena ble button. I f it is disabled, the func tion of DoS protecti on in Security setti ngs will be disabled.  P ackets Statistics I nterval （ 5- 60 ...

  • TP-Link Archer C7 - page 136

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 126 - Statistics Tabl e: IP /MAC Address The I P and MAC a ddres s are displ ayed with related statistics . Total Packets The total number of packets received and tra nsmitted by the router . Byt es The total number of bytes received and trans mitted by the rout er . Current Packets The total nu ...

  • TP-Link Archer C7 - page 137

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 127 - Appendix A: F AQ 1. How do I configure the r outer to access In ternet by ADSL users? 1) First, confi gure the ADS L Modem configured in RFC148 3 bridge model. 2) Connect the Et hernet cable from your A DSL Modem to the Int ernet port on the router . The telephone c ord plugs into the Line ...

  • TP-Link Archer C7 - page 138

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 128 - 2. How do I configure the r outer to access In ternet by Ethernet user s? 1) Login to the router , click the “Network” menu on the left of your browser , and click "W AN" submenu. On the WAN page, select “Dynamic IP” for "WAN Connection T ype", finish by clickin ...

  • TP-Link Archer C7 - page 139

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 129 - Figure A - 5 Add or Modify a Virtual server Entry  Note: Your opposite s ide should call your WA N IP, which is displ ayed on the “Status ” page. 4) How to enable DMZ Host: Log in to the router , click the “ Forwarding ” menu on the left of your browser , and click " DMZ &q ...

  • TP-Link Archer C7 - page 140

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 130 - Figure A -7 Basi c Security 4. I want to build a WEB S erver on the LAN, w hat should I do? 1) Because the WEB S erver port 80 will interfere wi th the WEB management port 80 on the router , you must change the WEB management port number to avoid interfe rence. 2) T o change th e WEB manag ...

  • TP-Link Archer C7 - page 141

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 131 - field of the Web browser. If the LAN IP of the modem connected wi th your router is 192.168. 0 .x , the default LAN IP of the router wi ll automatically s witch from 192.168. 0 .1 t o 192.168. 1 .1 to avoid I P conflic t; in this case , pleas e try http://19 2.168. 1 .1:88 . 3) Log in t o ...

  • TP-Link Archer C7 - page 142

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 132 - Appendix B: Configuring t he PCs In this section, we ’ l l introduce how to install and configure the TCP/ IP correctly in Windows XP . First make sure your E thernet A dapter is working, refer to the adapter ’ s manual if needed. 1. Inst all TCP/IP component 1) On the Windows taskbar ...

  • TP-Link Archer C7 - page 143

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 133 - 5) The followin g TC P/IP Propertie s win dow will display and t he IP Address tab is open on this window b y default . 6) Select Obtain an IP address automatically and Obtain DNS server auto matically , as shown in the Figure below: Figure B-3 ...

  • TP-Link Archer C7 - page 144

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 134 - Appendix C: S pecif ications General St a n dards IEEE 802.1 1 ac, IEEE 802.1 1n , IEEE 802.1 1g , IEEE 802.1 1b , IEEE 802.1 1a , IEEE 802.1 1e , IEEE 802.1 1i , IE EE 802.1X , IEEE 802.3X , IEEE 802.3 , IEEE 802.3u , IEEE 802.3ab Protocols TCP/IP , PPPoE, DHCP , ICMP , NA T , SNTP Ports ...

  • TP-Link Archer C7 - page 145

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 135 - Appendix D: Glossary  802. 11ac - IEE E 802.11ac is a wireless c omputer networking st andard of 802.11.This specific ation will enable mul ti - station WLA N throughput of at least 1 gigabit pe r second .This is accomplished by e xtending the air i nterface concepts embraced by 802.11n ...

  • TP-Link Archer C7 - page 146

    Archer C7 AC1750 Wireless Du al Band Gigabit Router - 136 -  MTU ( Maximu m Transmission Unit ) - The siz e in bytes of the larges t packet that can be transmitted.  NAT ( N etwork A ddress T ranslation) - NA T technology trans lates IP address es of a local area network to a diff erent IP address for the I nternet.  PPPoE ( P oint to P oi ...

Manufacturer TP-Link Category Router

Documents that we receive from a manufacturer of a TP-Link Archer C7 can be divided into several groups. They are, among others:
- TP-Link technical drawings
- Archer C7 manuals
- TP-Link product data sheets
- information booklets
- or energy labels TP-Link Archer C7
All of them are important, but the most important information from the point of view of use of the device are in the user manual TP-Link Archer C7.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TP-Link Archer C7, service manual, brief instructions and user manuals TP-Link Archer C7. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TP-Link Archer C7.

Similar manuals

A complete manual for the device TP-Link Archer C7, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TP-Link Archer C7 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TP-Link Archer C7.

A complete TP-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TP-Link Archer C7 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TP-Link Archer C7, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TP-Link Archer C7, that we can find in the current document
3. Tips how to use the basic functions of the device TP-Link Archer C7 - which should help us in our first steps of using TP-Link Archer C7
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TP-Link Archer C7
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TP-Link Archer C7 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TP-Link Archer C7?

Use the form below

If you did not solve your problem by using a manual TP-Link Archer C7, ask a question using the form below. If a user had a similar problem with TP-Link Archer C7 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)