English dropdown-ico

Manual Belkin P73045

36 pages 0.68 mb
Download

Go to site of 36

Summary
  • Belkin P73045 - page 1

    P73045 F1U128-KIT Bitr onics DualBus S witch Kit User Manual ...

  • Belkin P73045 - page 2

    ...

  • Belkin P73045 - page 3

    1 Intr oduction Featur es Thank you for purchasing the Belkin Components Bitr onics DualBus Switch Kit! Now , you and your colleagues can share and select between two differ ent parallel devices from your desktop. And, if you are using Windows ® 95, 98 or NT ® , you will be able to take advantage of Bitronics Software, which allows you to print a ...

  • Belkin P73045 - page 4

    2 Compatible Standards: IEEE 1284-1994 Parallel Port Communication Standard Electrical: Input V oltage 9VDC Max Input Current 600mA Max Power Consumption 5.4W Max Heat Dissipation 0.31 BTU/min Dimensions: Width : 7.0” (17.8cm) Height: 3.75” (9.5cm) Depth: 1.25” (3.2cm) Weight: 7.1 oz. (202 g) Storage T emperatur e: -10ºC to 50ºC (14ºF to 1 ...

  • Belkin P73045 - page 5

    3 DIP switch settings (located underneath switch): SW1: Reset Switch T o r eset, OFF → ON → OFF SW2 and SW3: TimeOut Setting TimeOut is the amount of time the switch remains locked on a PC port after data transfer . Use a longer TimeOut when connecting to scanners, mass storage devices and for large print jobs. Pr oduct Detail Device activity L ...

  • Belkin P73045 - page 6

    In manual mode, you can select a port manually through the buttons on the Bitronics switch. Y ou can also use this mode in conjunction with software to see your switch in action! • Press COMPUTER to select which computer port you wish to configur e or monitor . For the computer connected to Port 1, press the COMPUTER button until the LED on Port ...

  • Belkin P73045 - page 7

    5 Windows ® 3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 MS-DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Windows ® 95/98 and NT ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 NOTE: When installing software on any op ...

  • Belkin P73045 - page 8

    6 Softwar e installation: Windows ® 3.x Insert the diskette labeled P27236 in your floppy drive. In the Program Manager , click on File then click Run. In the space, type in "a:setup.exe". Follow the installation instruction prompts. After the setup pr ogram is done, simply double-click on the correct icon to run the port selection pr o ...

  • Belkin P73045 - page 9

    7 Softwar e installation: MS-DOS T o switch port, simply click on the port letter of your choice, and your computer will be connected to the device on the port chosen. Software-Installation: MS-DOS Enter the following at the DOS prompt and pr ess ENTER: Copy a:dosswport.com c:SWPORT .com SWPORT .com is a command-line executable. Please follow th ...

  • Belkin P73045 - page 10

    8 BEFORE YOU INST ALL THE BELKIN BITRONICS SOFTWARE, YOU MUST FIRST MAKE SURE THA T EACH DEVICE WORKS PROPERL Y ON ITS OWN WITH EACH COMPUTER. DO NOT CONNECT THE BITRONICS SWITCH TO THE COMPUTERS OR INST ALL THE SOFTWARE UNTIL INSTRUCTED BY THIS PROCEDURE! 1. Make sure that the printer port on your computer is set to ECP mode. T o do this, you must ...

  • Belkin P73045 - page 11

    9 3. Connect four computers and the devices to be shared to the Bitr onics Switch as shown below . T wo cables that connect computers to the Bitronics switch ar e included. T ake note of which port each device is connected to: Connect the power adapter to the power jack on the side of the switch, and plug it into an outlet. The example shown has a ...

  • Belkin P73045 - page 12

    10 4. In order for all computers to pr operly share the devices, the software must be installed on all four computers. 4.1. Insert the disk into your floppy drive. Click on Start, then click Run. Enter a:BITRONIX.exe, then click OK. 4.2. Y ou will see the following window . Click Setup. 4.3. Close all other running applications so that the softwar ...

  • Belkin P73045 - page 13

    11 4.4. Select the model of the Bitronics Switch you have, which is the F1U127 / F1U128. Click Next. 4.5. Select Destination Folder . The default folder is recommended. Click Next. Windows ® 95 / 98 and NT ® (continued) ...

  • Belkin P73045 - page 14

    12 Windows ® 95 / 98 and NT ® (continued) 4.6. Select Program Folder . The default, Belkin Bitr onics Switch, is the recommended. Click Next. 4.7. When done installing, the program will ask you to r estart your computer . Y ou must r estart in order to activate the software pr operly . Click Finish. Don’t for get to remove the disk from your fl ...

  • Belkin P73045 - page 15

    13 Windows ® 95 / 98 and NT ® (continued) 5. Once your computer has rebooted, the Bitr onics icon will appear in your system tray . This is how you can easily control and configure the Bitronics Switch. 6. Double-click on the icon to open up the setup program: Select the correct LPT port the Bitronics switch is connected to. If you only have ONE ...

  • Belkin P73045 - page 16

    14 Windows ® 95 / 98 and NT ® (continued) 7. Click on Settings. This is where you tell the softwar e what devices are connected to each port: Device T ype gives you a pull-down menu showing the types of printers installed on your computer and other possible parallel device types as well. Here, you must select the corr ect type for the device conn ...

  • Belkin P73045 - page 17

    15 Windows ® 95 / 98 and NT ® (continued) In our example, we have a Zip ® drive on Port A, so we chose Mass Storage Device for Port A. And in Port B, we have the Epson printer installed, so we chose that driver in the Device T ype for Port B. Click OK when finished. Display Name is a free text field. Y ou can enter any description here for the a ...

  • Belkin P73045 - page 18

    16 Windows ® 95 / 98 and NT ® (continued) 8. Change printer port from LPT1 to AutoSwitch port: If one or both of the devices being shared is a printer , you must follow the procedur e below to reconfigure the port connected to the printer . If both devices are printers, then this must be done for both printers. If neither device is a printer , th ...

  • Belkin P73045 - page 19

    17 Windows ® 95 / 98 and NT ® (continued) 8.3. Click on the Details tab. In the pull-down menu Print to the following port:, select the correct port this printer is connected to on the Bitronics switch: • LPx1 – P A (autoswitch) – Select this if the printer is connected to Port A of the Bitronics switch. • LPx1 – PB (autoswitch) – Sel ...

  • Belkin P73045 - page 20

    18 Windows ® 95 / 98 and NT ® (continued) 8.5. If NOT grayed out, click on Disable bi-dir ectional support for this printer . Otherwise, ignore. 8.6. Click OK in the Spool Settings window . Click OK again in the main properties window . Using the Bitronics Softwar e Example: T wo Printers Shar ed Between T wo Computers The Bitronics Softwar e aut ...

  • Belkin P73045 - page 21

    19 Windows ® 95 / 98 and NT ® (continued) How does it work? With the Bitronics Softwar e loaded and the ports properly configured for the printers as shown in step 8 above, when you print in Windows ® , the print job goes to the Bitronics softwar e first. There, the Bitronics softwar e adds a command in the beginning of the print job telling the ...

  • Belkin P73045 - page 22

    20 Windows ® 95 / 98 and NT ® (continued) All you have to do is pick your printer , and the software does everything else. But remember , ALL THE SETTINGS MUST BE CORRECT , otherwise you may print garbage out of the wrong printer! Below , the user has chosen the LaserJet ™ printer . Here, this printer is connected to Port A of the AutoSwitch. W ...

  • Belkin P73045 - page 23

    21 Windows ® 95 / 98 and NT ® (continued) EXAMPLE: Sharing One Printer and a Zip ® drive (or any other mass storage device) When dealing with a mass storage device (devices that add a drive letter to your system like E:) such as a Zip ® drive, the Bitronics Softwar e in the system tray must be configured so that the Bitr onics switch is default ...

  • Belkin P73045 - page 24

    22 Windows ® 95 / 98 and NT ® (continued) 2. Click on the port that has the mass storage device connected. In this case, it is a Zip ® Drive on Port A. As you can see, the Display Name entered above appears below as you had enter ed it. Click OK. Now , the Bitronics switch will always keep your computer connected to the Zip ® Drive. That way , ...

  • Belkin P73045 - page 25

    23 Windows ® 95 / 98 and NT ® (continued) Visual Feedback – How do I know what port I am on? When the Bitronics switch is in its normal scanning mode, the LEDs ar e moving back and forth across the computer ports. T o see the software in action, simply press the COMPUTER button so you can see a computer port’ s connection. Press the COMPUTER ...

  • Belkin P73045 - page 26

    24 Windows ® 95 / 98 and NT ® (continued) If no printers are installed If no printers are installed, the Settings type (see step 7) for each device must be set either for Mass Storage Device (if the device adds a drive letter to your system), or Scanner (for all other types of devices). The Bitronics softwar e may not function properly in some sy ...

  • Belkin P73045 - page 27

    25 Windows ® 95 / 98 and NT ® (continued) Using the File T ransfer Feature The file transfer feature of the Bitr onics switch allows both computers to connect as if there wer e a file transfer cable connected between them. T o do this, double-click on the Bitronics switch system tray icon, click on File T ransfer , and click OK. The LED of the co ...

  • Belkin P73045 - page 28

    26 Windows ® 95 / 98 and NT ® (continued) Usage in Windows NT ® In Windows NT ® , you can perform the same installation as in the Windows ® 95/ 98 procedur e above. Make sure the power supply is connected to the Bitronics switch, otherwise, ther e may be a significant delay in the processing of requests fr om NT ® -based machines. The Printer ...

  • Belkin P73045 - page 29

    Windows ® 95 / 98 and NT ® (continued) 27 T o set the spool settings corr ectly , click on the SCHEDULING tab. Make sure "Start printing after last page is spooled" is selected. Also, set "Priority" to highest: Click OK when done. ...

  • Belkin P73045 - page 30

    Windows ® 95 / 98 and NT ® (continued) 28 If you are still having pr oblems using the BITRONIX.exe software in Windows ® NT : First UNINST ALL the Bitronics softwar e. Y ou can do this by right-clicking on the taskbar icon and answering YES to the prompt. Then, click on ST AR T , PROGRAMS, BELKIN BITRONICS SWITCH, then UNINST ALLSHIELD. After re ...

  • Belkin P73045 - page 31

    Appendix Changing your PC’ s parallel port mode to ECP Changing your computer’ s parallel port mode to ECP increases speed and reliability of data transfers with the Bitronics Switches. Below ar e the steps on changing the settings on certain computers. Do this on all the computers connected to the switch. If your computer is not listed here, p ...

  • Belkin P73045 - page 32

    30 Appendix (continued) Hewlett-Packard Steps for HP Pavillion PC Models 1. At the HP Blue Scr een, press F1 to enter Setup. 2. Select Advanced fr om the menu bar . 3. Following the legend dir ections, select Peripheral Configuration and then use the arrow-down key to move to Parallel Port Mode. 4. Select the mode with the highest performance (e.g. ...

  • Belkin P73045 - page 33

    31 Appendix (continued) Steps for IBM Aptiva 2176-C33, IBM BIOS v BSTUS4B NOTE: The steps for this computer are not included in the document received in the box. 1. While the computer is booting, follow the dir ections on the screen: Press F1 to enter Setup. 2. Follow the legend on how to scr oll through the Setup options until you reach Input/Outp ...

  • Belkin P73045 - page 34

    Appendix (continued) 32 Sony Models PCV -70/90/100/120: 1. Restart your computer . 2. During the first black and white Sony scr een, press F3 to enter the boot screen. 3. Pr ess F1 to enter the BIOS Setup. 4. Use right arr ow to reach the Advanced menu. 5. Scr oll down and highlight Peripheral Configuration and press ENTER. 6. Scr oll down and high ...

  • Belkin P73045 - page 35

    33 Appendix (continued) 1. Normal (Output only) 2. Bi-directional (default) 3. ECP (requir es IEEE 1284 printer/parallel cable) 7. Select ECP and click OK to save r esults and close the window . 8. Click Y es to restart the computer . NOTE: Changes made in the Sony Notebook Utility are also made in the BIOS. Sony PCG-729: 1. In Windows ® 95, open ...

  • Belkin P73045 - page 36

    FCC Statement DECLARA TION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMP A TIBILITY W e, Belkin Components, of 501 West W alnut Street, Compton CA 90220, declare under our sole responsibility that the product: F1U128-KIT to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two cond ...

Manufacturer Belkin Category Switch

Documents that we receive from a manufacturer of a Belkin P73045 can be divided into several groups. They are, among others:
- Belkin technical drawings
- P73045 manuals
- Belkin product data sheets
- information booklets
- or energy labels Belkin P73045
All of them are important, but the most important information from the point of view of use of the device are in the user manual Belkin P73045.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Belkin P73045, service manual, brief instructions and user manuals Belkin P73045. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Belkin P73045.

Similar manuals

A complete manual for the device Belkin P73045, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Belkin P73045 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Belkin P73045.

A complete Belkin manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Belkin P73045 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Belkin P73045, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Belkin P73045, that we can find in the current document
3. Tips how to use the basic functions of the device Belkin P73045 - which should help us in our first steps of using Belkin P73045
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Belkin P73045
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Belkin P73045 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Belkin P73045?

Use the form below

If you did not solve your problem by using a manual Belkin P73045, ask a question using the form below. If a user had a similar problem with Belkin P73045 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)